Upon resuming from a system sleep state, the interrupts for all active
shared mailboxes need to be reenabled, otherwise they will not work.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

The Tegra HSP block supports 'shared mailboxes' that are simple 32-bit
registers consisting of a FULL bit in MSB position and 31 bits of data.
The hardware can be configured to trigger interrupts when a mailbox
is empty or full. Add support for these shared mailboxes to the HSP
driver.

The initial use for the mailboxes is the Tegra Combined UART. For this
purpose, we use interrupts to receive data, and spinning to wait for
the transmit mailbox to be emptied to minimize unnecessary overhead.

Based on work by Mikko Perttunen <mperttunen@nvidia.com>.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Shared mailboxes are a mechanism to transport data from one processor in
the system to another. They are bidirectional links with both a producer
and a consumer. Interrupts are used to let the consumer know when data
was written to the mailbox by the producer, and to let the producer know
when the consumer has read the data from the mailbox. These interrupts
are mapped to one or more "shared interrupts". Typically each processor
in the system owns one of these shared interrupts.

Add documentation to the device tree bindings about how clients can use
mailbox specifiers to request a specific shared mailbox and select which
direction they drive. Also document how to specify the shared interrupts
in addition to the existing doorbell interrupt.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Look through the whole controller list when mapping device tree
phandles to controllers instead of stopping at the first one.

Each controller is intended to only contain one kind of mailbox,
but some devices (like Tegra HSP) implement multiple kinds and use
the same device tree node for all of them. As such, we need to allow
multiple mbox_controllers per device tree node.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

The mailbox framework supports blocking transfers via completions for
clients that can sleep. In order to support blocking transfers in cases
where the transmission is not permitted to sleep, add a new ->flush()
callback that controller drivers can implement to busy loop until the
transmission has been completed. A new mbox_flush() function can be
called by mailbox consumers in atomic context to make sure a transfer
has completed.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Reviewed-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Reviewed-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Memory allocated through device-managed functions doesn't need to be
explicitly freed, so these calls can be removed.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Add device-managed equivalents of the mbox_controller_register() and
mbox_controller_unregister() functions that can be used to have the
devres infrastructure automatically unregister mailbox controllers on
driver probe failure or driver removal. This can help remove a lot of
boiler plate code from drivers.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Adopt the SPDX license identifier headers to ease license compliance
management.

Cc: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

The > comparison should be >= or we access one element beyond the end
of the array.

(The inst->qinsts[] array is allocated in the ti_msgmgr_probe() function
and it has ->num_valid_queues elements.)

Fixes: a2b79838 ("mailbox: ti-msgmgr: Add support for Secure Proxy")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Current mailbox driver of Hi3660 release the mailbox directly
before sending a new message which may cause last message lost
and next message sending doesn't take effect actually.

This patch fixs this issue by following the right progress below,
each time before sending a message, mailbox driver will check
whether the mailbox is in ready state, if last message has been
acknowledged, the mailbox driver will clear the ack state to turn
the mailbox to ready state again.
Signed-off-by: Kevin Wangtao <kevin.wangtao@hisilicon.com>
Reviewed-and-tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

The mbox_chan_ops structure can be const as it is only stored in the
ops field of an mbox_controller structure and this field is const.

Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Pull HID subsystem fixes from Jiri Kosina:

 - two device-specific quirks from Hans de Goede and Nic Soudée

 - reintroduction of (mistakenly remocved) ABS_RESERVED from Peter
   Hutterer

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  Input: restore EV_ABS ABS_RESERVED
  HID: quirks: fix RetroUSB.com devices
  HID: ite: Add USB id match for another ITE based keyboard rfkill key quirk

Pull backlight fix from Lee Jones:
 "Fix brightness levels when !DT in pwm_bl driver"

* tag 'backlight-fixes-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: pwm_bl: Fix brightness levels for non-DT case.

Pull ARM SoC fixes from Olof Johansson:
 "The usual batch; most of them are DT tweaks to fix misdescribed
  hardware. Beyond that:

   - A bugfix for MMP2 CPU detection, it's been there quite a while but
     makes sense to fix now anyway.

   - Some power management tweaks:
      + disabling of CPU idle power state on Marvell Armada 7K/8K
        (Macchiatobin et al)
      + Increase of minimum voltage on BananaPi M3
      + Tweak of power ramp time for DVFS on NXP/Freescale i.MX7SX

   - A couple of MAINTAINER updates:
      + MMP has a new volunteer to look after it
      + Mediatek adds a few keywords, IRC channel and wiki URL"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock
  ARM: imx: update the cpu power up timing setting on i.mx6sx
  Revert "arm64: dts: marvell: add CPU Idle power state support on Armada 7K/8K"
  ARM: dts: imx7d-pico: Describe the Wifi clock
  ARM: dts: realview: Fix some more duplicate regulator nodes
  MAINTAINERS: update entry for MMP platform
  ARM: mmp/mmp2: fix cpu_is_mmp2() on mmp2-dt
  MAINTAINERS: mediatek: Update SoC entry
  ARM: dts: bcm2837: Fix polarity of wifi reset GPIOs
  arm64: dts: mt7622: Drop the general purpose timer node
  arm64: dts: mt7622: fix no more console output on BPI-R64 board
  arm64: dts: mt7622: fix no more console output on rfb1
  ARM: dts: sun8i: a83t: bananapi-m3: increase vcc-pd voltage to 3.3V

Commit '88ba95be ("backlight: pwm_bl: Compute brightness of LED
linearly to human eye")' allows the possibility to compute a default
brightness table when there isn't the brightness-levels property in the
DT. Unfortunately the changes made broke the pwm backlight for the
non-DT boards.

Usually, the non-DT boards don't pass the brightness levels via platform
data, instead, it sets the max_brightness in their platform data and the
driver calculates the level without a table. The offending patch assumed
that when there is no brightness levels table we should create one, but this
is clearly wrong for the non-DT case.

After this patch the code handles the DT and the non-DT case taking in
consideration also if max_brightness is set or not.

Fixes: 88ba95be ("backlight: pwm_bl: Compute brightness of LED linearly to human eye")
Reported-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Pull networking fixes from David Miller:
 "A decent batch of fixes here. I'd say about half are for problems that
  have existed for a while, and half are for new regressions added in
  the 4.20 merge window.

   1) Fix 10G SFP phy module detection in mvpp2, from Baruch Siach.

   2) Revert bogus emac driver change, from Benjamin Herrenschmidt.

   3) Handle BPF exported data structure with pointers when building
      32-bit userland, from Daniel Borkmann.

   4) Memory leak fix in act_police, from Davide Caratti.

   5) Check RX checksum offload in RX descriptors properly in aquantia
      driver, from Dmitry Bogdanov.

   6) SKB unlink fix in various spots, from Edward Cree.

   7) ndo_dflt_fdb_dump() only works with ethernet, enforce this, from
      Eric Dumazet.

   8) Fix FID leak in mlxsw driver, from Ido Schimmel.

   9) IOTLB locking fix in vhost, from Jean-Philippe Brucker.

  10) Fix SKB truesize accounting in ipv4/ipv6/netfilter frag memory
      limits otherwise namespace exit can hang. From Jiri Wiesner.

  11) Address block parsing length fixes in x25 from Martin Schiller.

  12) IRQ and ring accounting fixes in bnxt_en, from Michael Chan.

  13) For tun interfaces, only iface delete works with rtnl ops, enforce
      this by disallowing add. From Nicolas Dichtel.

  14) Use after free in liquidio, from Pan Bian.

  15) Fix SKB use after passing to netif_receive_skb(), from Prashant
      Bhole.

  16) Static key accounting and other fixes in XPS from Sabrina Dubroca.

  17) Partially initialized flow key passed to ip6_route_output(), from
      Shmulik Ladkani.

  18) Fix RTNL deadlock during reset in ibmvnic driver, from Thomas
      Falcon.

  19) Several small TCP fixes (off-by-one on window probe abort, NULL
      deref in tail loss probe, SNMP mis-estimations) from Yuchung
      Cheng"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (93 commits)
  net/sched: cls_flower: Reject duplicated rules also under skip_sw
  bnxt_en: Fix _bnxt_get_max_rings() for 57500 chips.
  bnxt_en: Fix NQ/CP rings accounting on the new 57500 chips.
  bnxt_en: Keep track of reserved IRQs.
  bnxt_en: Fix CNP CoS queue regression.
  net/mlx4_core: Correctly set PFC param if global pause is turned off.
  Revert "net/ibm/emac: wrong bit is used for STA control"
  neighbour: Avoid writing before skb->head in neigh_hh_output()
  ipv6: Check available headroom in ip6_xmit() even without options
  tcp: lack of available data can also cause TSO defer
  ipv6: sr: properly initialize flowi6 prior passing to ip6_route_output
  mlxsw: spectrum_switchdev: Fix VLAN device deletion via ioctl
  mlxsw: spectrum_router: Relax GRE decap matching check
  mlxsw: spectrum_switchdev: Avoid leaking FID's reference count
  mlxsw: spectrum_nve: Remove easily triggerable warnings
  ipv4: ipv6: netfilter: Adjust the frag mem limit when truesize changes
  sctp: frag_point sanity check
  tcp: fix NULL ref in tail loss probe
  tcp: Do not underestimate rwnd_limited
  net: use skb_list_del_init() to remove from RX sublists
  ...

Pull x86 fixes from Ingo Molnar:
 "Three fixes: a boot parameter re-(re-)fix, a retpoline build artifact
  fix and an LLVM workaround"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vdso: Drop implicit common-page-size linker flag
  x86/build: Fix compiler support check for CONFIG_RETPOLINE
  x86/boot: Clear RSDP address in boot_params for broken loaders

Pull kprobes fixes from Ingo Molnar:
 "Two kprobes fixes: a blacklist fix and an instruction patching related
  corruption fix"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  kprobes/x86: Blacklist non-attachable interrupt functions
  kprobes/x86: Fix instruction patching corruption when copying more than one RIP-relative instruction

Pull EFI fixes from Ingo Molnar:
 "Two fixes: a large-system fix and an earlyprintk fix with certain
  resolutions"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/earlyprintk/efi: Fix infinite loop on some screen widths
  x86/efi: Allocate e820 buffer before calling efi_exit_boot_service

Currently, duplicated rules are rejected only for skip_hw or "none",
hence allowing users to push duplicates into HW for no reason.

Use the flower tables to protect for that.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reported-by: Chris Mi <chrism@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: Bug fixes.

The first patch fixes a regression on CoS queue setup, introduced
recently by the 57500 new chip support patches.  The rest are
fixes related to ring and resource accounting on the new 57500 chips.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The CP rings are accounted differently on the new 57500 chips.  There
must be enough CP rings for the sum of RX and TX rings on the new
chips.  The current logic may be over-estimating the RX and TX rings.

The output parameter max_cp should be the maximum NQs capped by
MSIX vectors available for networking in the context of 57500 chips.
The existing code which uses CMPL rings capped by the MSIX vectors
works most of the time but is not always correct.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>