Steffen Klassert says:

====================
1) Don't use a wildcard SA if a more precise one is in acquire state,
   from Fan Du.

2) Simplify the SA lookup when using wildcard source. We need to check
   only the destination in this case, from Fan Du.

3) Add a receive path hook for IPsec virtual tunnel interfaces
   to xfrm6_mode_tunnel.

4) Add support for IPsec virtual tunnel interfaces to ipv6.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Himanshu Madhani says:

====================
qlcnic: ethtool enhancements and code cleanup.

This patch series contains

o updates to ethtool for pause settings and enhance
  register dump to display mask and ring indices.
o cleanup in DCB code and remove redundant eSwitch enablement command.
o fixed firmware dump collection logic to skip unknown entries.

Changes from v3 -> v4
o Dropped patch for Tx queue validation to be submitted in net.

Changes from v2 -> v3

o Updated patch to print informational messages as per Joe Perches's comment.

Changes from v1 -> v2

o Dropped patch to register device if adapter is in FAILED state for more rework.
o Updated patch to display ring indices via ethtool per Ben Hutchings's comment.
o Update patch for DCB cleanup per Stephen Hemminger's comment.

Please apply to net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

o Driver aborts the minidump collection operation when it finds
  an unknown entry opcode. This patch skips unknown entry type
  and resumes the minidump collection operation.
o Removed a comparision of collected dump size with expected dump size.
  Size may differ when driver decides to skip an entry.
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

o Move dcb specific function definitions to dcb files.
o Move dcb specific variables to qlcnic_dcb structure.
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When more than one NIC physical functions are enabled on a port,
eSwitch on that port gets enabled automatically. Driver
need not explicitly enable the eSwitch.
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update ethtool standard pause parameter settings and display
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

o Allow collecting the firmware dump of halted firmware when auto
  recovery is disabled.
Signed-off-by: Pratik Pujar <pratik.pujar@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

o Updated ethtool -d <ethX> option to display ring indices for Transmit(Tx),
  Receive(Rx), and Status(St) rings.
o Updated ethtool -d <ethX> option to display ring interrupt mask for Transmit(Tx),
  and Status(St) rings.
Signed-off-by: Pratik Pujar <pratik.pujar@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rename tcp_tso_segment() to tcp_gso_segment(), to better reflect
what is going on, and ease grep games.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jon Maloy says:

====================
Some small and relatively straightforward patches. With exception of
the two first ones they are all unrelated and address minor issues.

v2: update of v1 (http://patchwork.ozlabs.org/patch/277404/)

-added commit to use memcpy_fromiovec on user data as per v1 feedback
-updated sparse fix commit to drop chunks covered by above commit
-added new commit that greatly simplifies the link lookup routine
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When checking statistics or changing parameters on a link, the
link_find_link function is used to locate the link with a given
name. The complex method of deconstructing the name into local
and remote address/interface is error prone and may fail if the
interface names contains special characters. We change the lookup
method to iterate over the list of nodes and compare the link
names.
Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

link_cmd_set_value() takes commands for link, bearer and media related
configuration. Genereally the function returns 0 when a command is
recognized, and -EINVAL when it is not. However, in the switch for link
related commands it returns 0 even when the command is unrecognized. This
will sometimes make it look as if a failed configuration command has been
successful, but has otherwise no negative effects.

We remove this anomaly by returning -EINVAL even for link commands. We also
rework all three switches to make them  conforming to common kernel coding
style.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, rcv_msg() always returns zero on a packet delivery upcall
from net_device.

To make its behavior more compliant with the way this API should be
used, we change this to let it return NET_RX_SUCCESS (which is zero
anyway) when it is able to handle the packet, and NET_RX_DROP otherwise.
The latter does not imply any functional change, it only enables the
driver to keep more accurate statistics about the fate of delivered
packets.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc_block_bearer() currently takes a bearer name (const char*)
as argument. This requires the function to make a lookup to find
the pointer to the corresponding bearer struct. In the current
code base this is not necessary, since the only two callers
(tipc_continue(),recv_notification()) already have validated
copies of this pointer, and hence can pass it directly in the
function call.

We change tipc_block_bearer() to directly take struct tipc_bearer*
as argument instead.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

TIPC 'bearer' exists as an abstract concept, while 'media'
is deemed a specific implementation of a bearer, such as Ethernet
or Infiniband media. When a component inside TIPC wants to control
a specific media, it only needs to access the generic bearer API
to achieve this. However, in the current media implementations,
the 'bearer' name is also extensively used in media specific
function and variable names.

This may create confusion, so we choose to replace the term 'bearer'
with 'media' in all function names, variable names, and prefixes
where this is what really is meant.

Note that this change is cosmetic only, and no runtime behaviour
changes are made here.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eliminate below sparse warnings:

net/tipc/link.c:1210:37: warning: cast removes address space of expression
net/tipc/link.c:1218:59: warning: incorrect type in argument 2 (different address spaces)
net/tipc/link.c:1218:59:    expected void const [noderef] <asn:1>*from
net/tipc/link.c:1218:59:    got unsigned char const [usertype] *[assigned] sect_crs
net/tipc/socket.c:341:49: warning: Using plain integer as NULL pointer
net/tipc/socket.c:1371:36: warning: Using plain integer as NULL pointer
net/tipc/socket.c:1694:57: warning: Using plain integer as NULL pointer
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Andreas Bofjäll <andreas.bofjall@ericsson.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc_msg_build() now copies message data from iovec to skb_buff
using memcpy_fromiovecend(), which doesn't need to be passed the
iovec length to perform the copying.

So we remove the parameter indicating iovec length in all
functions where TIPC messages are built and sent.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc_msg_build() calls skb_copy_to_linear_data_offset() to copy data
from user space to kernel space. However, the latter function does
in its turn call memcpy() to perform the actual copying. This poses
an obvious security and robustness risk, since memcpy() never makes
any validity check on the pointer it is copying from.

To correct this, we the replace the offending function call with
a call to memcpy_fromiovecend(), which uses copy_from_user() to
perform the copying.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Macro definitions should not normally end with a semi-colon, as this
makes it dangerous to use them an if...else statement.  Happily this
has not happened yet.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While working on virtio_net new allocation strategy to increase
payload/truesize ratio, we found that refactoring sk_page_frag_refill()
was needed.

This patch splits sk_page_frag_refill() into two parts, adding
skb_page_frag_refill() which can be used without a socket.

While we are at it, add a minimum frag size of 32 for
sk_page_frag_refill()

Michael will either use netdev_alloc_frag() from softirq context,
or skb_page_frag_refill() from process context in refill_work()
 (GFP_KERNEL allocations)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Michael Dalton <mwdalton@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jingoo Han says:

====================
net: ethernet: remove unnecessary pci_set_drvdata() part 1

Since commit 0998d063
(device-core: Ensure drvdata = NULL when no driver is bound),
the driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Don Fry <pcnet32@frontier.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: David Dillow <dave@thedillows.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

John W. Linville says:

====================
This is a batch of updates intended for the 3.13 stream...

The biggest item of interest in here is wcn36xx, the new mac80211
driver for Qualcomm WCN3660/WCN3680 hardware.

Regarding the mac80211 bits, Johannes says:

"We have an assortment of cleanups and new features, of which the
biggest one is probably the channel-switch support in IBSS. Nothing
else really stands out much."

On top of that, the ath9k and rt2x00 get a lot of update action from
Felix Fietkau and Gabor Juhos, respectively.  There are a handful of
updates to other drivers here and there as well.

Please let me know if there are problems!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Half of the rt_cache_stat fields are no longer used after IP
route cache removal, lets shrink this per cpu area.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>