Users of bpf_object__open()/bpf_object__load() APIs may want to
load the programs and maps onto a device for offload.  Allow
setting ifindex on those sub-objects.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Specify default section names for BPF_PROG_TYPE_LIRC_MODE2
and BPF_PROG_TYPE_LWT_SEG6LOCAL, these are the only two
missing right now.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Commit 4bfe3bd3 ("tools/bpftool: use version from the kernel
source tree") added version to bpftool.  The version used is
equal to the kernel version and obtained by running make kernelversion
against kernel source tree.  Version is then communicated
to the sources with a command line define set in CFLAGS.

Use a simply expanded variable for the version, otherwise the
recursive make will run every time CFLAGS are used.

This brings the single-job compilation time for me from almost
16 sec down to less than 4 sec.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

XDP_TX requires also changing the MAC-addrs, else some hardware
may drop the TX packet before reaching the wire.  This was
observed with driver mlx5.

If xdp_rxq_info select --action XDP_TX the swapmac functionality
is activated.  It is also possible to manually enable via cmdline
option --swapmac.  This is practical if wanting to measure the
overhead of writing/updating payload for other action types.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

There is a cost associated with reading the packet data payload
that this test ignored.  Add option --read to allow enabling
reading part of the payload.

This sample/tool helps us analyse an issue observed with a NIC
mlx5 (ConnectX-5 Ex) and an Intel(R) Xeon(R) CPU E5-1650 v4.

With no_touch of data:

Running XDP on dev:mlx5p1 (ifindex:8) action:XDP_DROP options:no_touch
XDP stats       CPU     pps         issue-pps
XDP-RX CPU      0       14,465,157  0
XDP-RX CPU      1       14,464,728  0
XDP-RX CPU      2       14,465,283  0
XDP-RX CPU      3       14,465,282  0
XDP-RX CPU      4       14,464,159  0
XDP-RX CPU      5       14,465,379  0
XDP-RX CPU      total   86,789,992

When not touching data, we observe that the CPUs have idle cycles.
When reading data the CPUs are 100% busy in softirq.

With reading data:

Running XDP on dev:mlx5p1 (ifindex:8) action:XDP_DROP options:read
XDP stats       CPU     pps         issue-pps
XDP-RX CPU      0       9,620,639   0
XDP-RX CPU      1       9,489,843   0
XDP-RX CPU      2       9,407,854   0
XDP-RX CPU      3       9,422,289   0
XDP-RX CPU      4       9,321,959   0
XDP-RX CPU      5       9,395,242   0
XDP-RX CPU      total   56,657,828

The effect seen above is a result of cache-misses occuring when
more RXQs are being used.  Based on perf-event observations, our
conclusion is that the CPUs DDIO (Direct Data I/O) choose to
deliver packet into main memory, instead of L3-cache.  We also
found, that this can be mitigated by either using less RXQs or by
reducing NICs the RX-ring size.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

TCP Fast Open is triggered by sys_sendmsg with MSG_FASTOPEN flag for
SOCK_STREAM socket.

Even though it's sys_sendmsg, it eventually calls __inet_stream_connect
the same way sys_connect does for TCP.  __inet_stream_connect, in turn,
already has BPF hooks for sys_connect.

That means TFO is already covered by BPF_CGROUP_INET{4,6}_CONNECT and
the only missing piece is selftest. The patch adds selftest for TFO.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add an example program showing how to sample packets from XDP using the
perf event buffer. The example userspace program just prints the ethernet
header for every packet sampled.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add two new helper functions to trace_helpers that supports polling
multiple perf file descriptors for events. These are used to the XDP
perf_event_output example, which needs to work with one perf fd per CPU.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Map read has been supported on NFP, this patch enables optimization
for memcpy from map to packet.

This patch also fixed one latent bug which will cause copying from
unexpected address once memcpy for map pointer enabled.  The fixed
code path was not exercised before.
Reported-by: Mary Pham <mary.pham@netronome.com>
Reported-by: David Beckett <david.beckett@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Petr Machata says:

====================
Multipath tests for tunnel devices

This patchset adds a test for ECMP and weighted ECMP between two GRE
tunnels.

In patches #1 and #2, the function multipath_eval() is first moved from
router_multipath.sh to lib.sh for ease of reuse, and then fixed up.

In patch #3, the function tc_rule_stats_get() is parameterized to be
useful for egress rules as well.

In patch #4, a new function __simple_if_init() is extracted from
simple_if_init(). This covers the logic that needs to be done for the
usual interface: VRF migration, upping and installation of IP addresses.

Patch #5 then adds the test itself.

Additionally in patch #6, a requirement to add diagrams to selftests is
documented.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

ASCII art diagrams are well suited for presenting the topology that a
test uses while being easy to embed directly in the test file iteslf.
They make the information very easy to grasp even for simple topologies,
and for more complex ones they are almost essential, as figuring out the
interconnects from the script itself proves to be difficult.

Therefore state the requirement for topology ASCII art in README.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a GRE-tunneling test such that there are two tunnels involved, with
a multipath route listing both as next hops. Similarly to
router_multipath.sh, test that the distribution of traffic to the
tunnels honors the configured weights.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function simple_if_init() does two things: it creates a VRF, then
moves an interface into this VRF and configures addresses. The latter
comes in handy when adding more interfaces into a VRF later on. The
situation is similar for simple_if_fini().

Therefore split the interface remastering and address de/initialization
logic to a new pair of helpers __simple_if_init() / __simple_if_fini(),
and defer to these helpers from simple_if_init() and simple_if_fini().
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The GRE multipath tests need stats on an egress counter. Change
tc_rule_stats_get() to take direction as an optional argument, with
default of ingress.

Take the opportunity to change line continuation character from | to \.
Move the | to the next line, which indent.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

- Change the indentation of the function body from 7 spaces to one tab.
- Move initialization of weights_ratio up so that it can be referenced
  from the error message about packet difference being zero.
- Move |'s consistently to continuation line, which reindent.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This function will be useful for the GRE multipath test that is coming
later.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It looks like the prior VLA removal, commit b16520f7 ("net/tls: Remove
VLA usage"), and a new VLA addition, commit c46234eb ("tls: RX path
for ktls"), passed in the night. This removes the newly added VLA, which
happens to have its bounds based on the same max value.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The IP addresses of tunnel endpoint at H3 are set at the VLAN device
$h3.555. Therefore when test_gretap_untagged_egress() sets vlan 555 to
egress untagged at $swp3, $h3's rp_filter rejects these packets. The
test then spuriously fails.

Therefore turn off net.ipv4.conf.{all, $h3}.rp_filter.

Fixes: 9c7c8a82 ("selftests: forwarding: mirror_gre_vlan_bridge_1q: Add more tests")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the quest to remove all stack VLA usage from the kernel[1], this
allocates the values buffer during the callback instead of putting it
on the stack.

[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.comSigned-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
net: sched: support replay of filter offload when binding to block

This series from John adds the ability to replay filter offload requests
when new offload callback is being registered on a TC block.  This is most
likely to take place for shared blocks today, when a block which already
has rules is bound to another interface.  Prior to this patch set if any
of the rules were offloaded the block bind would fail.

A new tcf_proto_op is added to generate a filter-specific offload request.
The new 'offload' op is supporting extack from day 0, hence we need to
propagate extack to .ndo_setup_tc TC_BLOCK_BIND/TC_BLOCK_UNBIND and
through tcf_block_cb_register() to tcf_block_playback_offloads().

The immediate use of this patch set is to simplify life of drivers which
require duplicating rules when sharing blocks.  Switch drivers (mlxsw)
can bind ports to rule lists dynamically, NIC drivers generally don't
have that ability and need the rules to be duplicated for each ingress
they match on.  In code terms this means that switch drivers don't
register multiple callbacks for each port.  NIC drivers do, and get a
separate request and hance rule per-port, as if the block was not shared.
The registration fails today, however, if some rules were already present.

As John notes in description of patch 7, drivers which register multiple
callbacks to shared blocks will likely need to flush the rules on block
unbind.  This set makes the core not only replay the the offload add
requests but also offload remove requests when callback is unregistered.

v2:
 - name parameters in patch 2;
 - use unsigned int instead of u32 for in_hw_coun;
 - improve extack message in patch 7.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Call the reoffload tcf_proto_op on all tcf_proto nodes in all chains of a
block when a callback tries to register to a block that already has
offloaded rules. If all existing rules cannot be offloaded then the
registration is rejected. This replaces the previous policy of rejecting
such callback registration outright.

On unregistration of a callback, the rules are flushed for that given cb.
The implementation of block sharing in the NFP driver, for example,
duplicates shared rules to all devs bound to a block. This meant that
rules could still exist in hw even after a device is unbound from a block
(assuming the block still remains active).
Signed-off-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the offload tcf_proto_op in cls_bpf to generate an offload message for
each bpf prog in the given tcf_proto. Call the specified callback with
this new offload message. The function only returns an error if the
callback rejects adding a 'hardware only' prog.

A prog contains a flag to indicate if it is in hardware or not. To
ensure the offload function properly maintains this flag, keep a reference
counter for the number of instances of the prog that are in hardware. Only
update the flag when this counter changes from or to 0.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the offload tcf_proto_op in cls_u32 to generate an offload message for
each filter and the hashtable in the given tcf_proto. Call the specified
callback with this new offload message. The function only returns an error
if the callback rejects adding a 'hardware only' rule.

A filter contains a flag to indicate if it is in hardware or not. To
ensure the offload function properly maintains this flag, keep a reference
counter for the number of instances of the filter that are in hardware.
Only update the flag when this counter changes from or to 0.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the reoffload tcf_proto_op in matchall to generate an offload message
for each filter in the given tcf_proto. Call the specified callback with
this new offload message. The function only returns an error if the
callback rejects adding a 'hardware only' rule.

Ensure matchall flags correctly report if the rule is in hw by keeping a
reference counter for the number of instances of the rule offloaded. Only
update the flag when this counter changes from or to 0.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the reoffload tcf_proto_op in flower to generate an offload message
for each filter in the given tcf_proto. Call the specified callback with
this new offload message. The function only returns an error if the
callback rejects adding a 'hardware only' rule.

A filter contains a flag to indicate if it is in hardware or not. To
ensure the reoffload function properly maintains this flag, keep a
reference counter for the number of instances of the filter that are in
hardware. Only update the flag when this counter changes from or to 0. Add
a generic helper function to implement this behaviour.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Create a new tcf_proto_op called 'reoffload' that generates a new offload
message for each node in a tcf_proto. Pointers to the tcf_proto and
whether the offload request is to add or delete the node are included.
Also included is a callback function to send the offload message to and
the option of priv data to go with the cb.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pass the extact struct from a tc qdisc add to the block bind function and,
in turn, to the setup_tc ndo of binding device via the tc_block_offload
struct. Pass this back to any block callback registrations to allow
netlink logging of fails in the bind process.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sergei Shtylyov says:

====================
sh_eth: RPADIR related clean-ups

Here's a set of 2 patches against DaveM's 'net-next.git' repo. They are
clean-ups related to RPADIR (DMA padding to NET_IP_ALIGN)...
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If RPADIR exists, the value written to it is always the same for all SoCs
(and derived from NET_IP_ALIGN), so there has not  been any need to store
it in the *struct* sh_eth_cpu_data...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

The *enum*  RPADIR_BIT  was declared in the commit 86a74ff2 ("net:
sh_eth: add support for Renesas SuperH Ethernet") adding SH771x support,
however the SH771x manual doesn't have the RPADIR register described and,
moreover, tells why the padding insertion must not be used. The newer SoC
manuals do have RPADIR documented, though with somewhat different layout --
update the *enum* according to these manuals...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

So far unsupported WoL options are silently ignored. Change this and
reject attempts to set unsupported options. This prevents situations
where a user tries to set an unsupported WoL option and is under the
impression it was successful because ethtool doesn't complain.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 5691484d ("net: ip6_gre: Fix headroom request in
ip6erspan_tunnel_xmit()") and commit 01b8d064 ("net: ip6_gre:
Request headroom in __gre6_xmit()") fix problems in reserving headroom
in the packets tunneled through ip6gre/tap and ip6erspan netdevices.

These two patches included snippets that reproduced the issues. This
patch elevates the snippets to a full-fledged test case.
Suggested-by: David Miller <davem@davemloft.net>
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Guillaume Nault says:

====================
l2tp: trivial cleanups

Just a set of unrelated trivial cleanups (remove unused code, make
local functions static, etc.).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

It always returns 0, and nobody reads the return value anyway.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace 'l2tp_pernet(tunnel->l2tp_net)' with 'pn', which has been set
on the preceding line.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

This function is only used in l2tp_core.c.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

This function is only used in l2tp_core.c.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

This function, and the associated .priv field, are unused.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

This callback has never been implemented.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp_core.c verifies that ->session_close() is defined before calling
it. There's no need for a stub.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>