- 13 Sep, 2019 1 commit
-
-
Guenter Roeck authored
New driver should use devm_hwmon_device_register_with_info() or hwmon_device_register_with_info() to register with the hwmon subsystem. Signed-off-by:Guenter Roeck <linux@roeck-us.net>
-
- 12 Sep, 2019 1 commit
-
-
amy.shih authored
According to datasheet, the SMI status register setting of LTD temperature is SMI_STS3, and the SMI status register setting of fan is SMI_STS5 and SMI_STS6. Signed-off-by:
amy.shih <amy.shih@advantech.com.tw> Link: https://lore.kernel.org/r/20190912113300.4714-1-Amy.Shih@advantech.com.twSigned-off-by:
-
- 10 Sep, 2019 2 commits
-
-
Dan Robertson authored
Add support for the Sensirion SHTC3 humidity and temperature sensor to the shtc1 module. Signed-off-by:
Dan Robertson <dan@dlrobertson.com> Link: https://lore.kernel.org/r/20190905014554.21658-2-dan@dlrobertson.comSigned-off-by:
-
Dan Robertson authored
Fix an error in the bitmaskfor the shtc1 and shtw1 bitmask used to retrieve the chip ID from the ID register. See section 5.7 of the shtw1 or shtc1 datasheet for details. Fixes: 1a539d37 ("hwmon: add support for Sensirion SHTC1 sensor") Signed-off-by:
-
- 04 Sep, 2019 1 commit
-
-
Iker Perez del Palomar Sustatxa authored
Current sample time values are over estimated, this patches applies values closer to the ones defined in the data-sheets. Signed-off-by:
Iker Perez del Palomar Sustatxa <iker.perez@codethink.co.uk> [groeck: resolved conflicts; use default conversion times] Signed-off-by:
-
- 03 Sep, 2019 35 commits
-
-
Wolfram Sang authored
And simplify the error handling. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20190903181256.13450-4-wsa+renesas@sang-engineering.comSigned-off-by:
-
Wolfram Sang authored
And simplify the error handling. Signed-off-by:
-
Wolfram Sang authored
And simplify the error handling. Signed-off-by:
-
kbuild test robot authored
Use devm_platform_ioremap_resource helper which wraps platform_get_resource() and devm_ioremap_resource() together. Generated by: scripts/coccinelle/api/devm_platform_ioremap_resource.cocci Fixes: 658e687b4218 ("hwmon: Add Synaptics AS370 PVT sensor driver") CC: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by:kbuild test robot <lkp@intel.com> Signed-off-by:
Julia Lawall <julia.lawall@lip6.fr> Reviewed-by:
Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/alpine.DEB.2.21.1909030646180.3228@hadrienSigned-off-by:
-
Guenter Roeck authored
For PCT7027, the sampling period is configured using a dedicated register. Signed-off-by: -
Guenter Roeck authored
TMP112 uses an uncommon method to write the conversion time: its configuration register is 16 bit wide, and the conversion time is configured in its second byte. Signed-off-by: -
Guenter Roeck authored
We'll need per-chip handling for updating the sample interval. To prepare for it, separate the code implementing it into its own function. Signed-off-by: -
Guenter Roeck authored
The conversion (sample) time is configurable for several chips supported by the lm75 driver. With the necessary infrastructure in place, enable this support for all chips using the configuration register for this purpose. DS1775: Conversion time: 187.5, 375, 750, 1500 ms Sensor resolution: 9, 10, 11, 12 bit DS75, STDS75: Conversion time: 150, 300, 600, 1200 ms Sensor resolution: 9, 10, 11, 12 bit DS7505: Conversion time: 25, 50, 100, 200 ms Sensor resolution: 9, 10, 11, 12 bit MCP980[0123]: Conversion time: 75, 150, 300, 600 ms Sensor resolution: 9, 10, 11, 12 bit TMP100, TMP101: Conversion time: 75, 150, 300, 600 ms Sensor resolution: 9, 10, 11, 12 bit TMP75, TMP105, TMP175, TMP275: Conversion time: 38, 75, 150, 300 ms Sensor resolution: 9, 10, 11, 12 bit While doing this, it became obvious that the masks and values to set the converion (sample) time is similar for all those chips, and that other chips with configurable sample times will need separate code anyway. For that reason, replace the sample_set_masks and sample_clr_mask configuration parameters with a single array and with a constant. Signed-off-by: -
amy.shih authored
According to kernel hwmon sysfs-interface documentation, temperature critical max value, typically greater than corresponding temp_max values. Thus, reads the LTD_HV_HL (LTD HIGH VALUE HIGH LIMITATION) and LTD_LV_HL (LTD LOW VALUE HIGH LIMITATION) for case hwmon_temp_crit and hwmon_temp_crit_hyst. Reads the LTD_HV_LL (HIGH VALUE LOW LIMITATION) and LTD_LV_LL (LOW VALUE LOW LIMITATION) for case hwmon_temp_max and hwmon_temp_max_hyst. Signed-off-by:
-
Jisheng Zhang authored
Add device tree bindings for Synaptics AS370 PVT sensors. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20190827113337.384457f6@xhacker.debianSigned-off-by:
-
Jisheng Zhang authored
Add a new driver for Synaptics AS370 PVT sensors. Currently, only temperature is supported. Signed-off-by:
-
Eddie James authored
Version 2 of the PSU supports a second page of data and changes the format of the FW version. Use the devicetree binding to differentiate between the version the driver should use. Signed-off-by:
Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/1567192263-15065-4-git-send-email-eajames@linux.ibm.comSigned-off-by:
-
Eddie James authored
Document the compatible string for version 2 of the IBM CFFPS PSU. Signed-off-by:
-
Michal Simek authored
There is no reason why power channel shouldn't be exported as is done for voltage, current, temperature and humidity. Power channel is available on iio ina226 driver. Sysfs IIO documentation for power attribute added by commit 7c6d5c7e ("iio: Documentation: Add missing documentation for power attribute") is declaring that value is in mili-Watts but hwmon interface is expecting value in micro-Watts that's why there is a need for mili-Watts to micro-Watts conversion. Tested on Xilinx ZCU102 board. Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/db71f5ae87e4521a2856a1be5544de0b6cede575.1566483741.git.michal.simek@xilinx.comSigned-off-by:
-
John Wang authored
The ipsps1 is an Inspur Power System power supply unit Signed-off-by:
John Wang <wangzqbj@inspur.com> Reviewed-by:
-
John Wang authored
Add the driver to monitor Inspur Power System power supplies with hwmon over pmbus. This driver adds sysfs attributes for additional power supply data, including vendor, model, part_number, serial number, firmware revision, hardware revision, and psu mode(active/standby). Signed-off-by:
Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20190819091509.29276-1-wangzqbj@inspur.comSigned-off-by:
-
Max Staudt authored
ltc2990 will now use device_property_read_u32_array() instead of of_property_read_u32_array() - allowing the use of software nodes via fwnode_create_software_node(). This allows code using i2c_new_device() to specify a default measurement mode for the LTC2990 via fwnode_create_software_node(). Signed-off-by:
Max Staudt <max@enpas.org> Reviewed-by:
Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20190819121618.16557-2-max@enpas.orgSigned-off-by:
-
Stefan Wahren authored
The email address listed in MODULE_AUTHOR() will be disabled in the near future. Replace it with my private one. Signed-off-by:
Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/1565720249-6549-2-git-send-email-wahrenst@gmx.netSigned-off-by:
-
Iker Perez del Palomar Sustatxa authored
* Create two separate functions to write into hwmon_temp and hwmon_chip. * Call the functions from lm75_write. * Make hwm_chip writable if the chip supports more than one sample time. Signed-off-by:
-
Iker Perez del Palomar Sustatxa authored
The new fields are included to prepare the driver for next patch. The fields are: * *resolutions: Stores all the supported resolutions by the device. * num_sample_times: Stores the number of possible sample times. * *sample_times: Stores all the possible sample times to be set. * sample_set_masks: The set_masks for the possible sample times * sample_clr_mask: Clear mask to set the default sample time. Signed-off-by:
-
Iker Perez del Palomar Sustatxa authored
Wrap the existing code to write configurations into registers in a function. Added error handling to the function. Signed-off-by:
-
Iker Perez del Palomar Sustatxa authored
* Add to lm75_data kind field to store the kind of device the driver is working with. * Add an structure to store the configuration parameters of all the supported devices. * Delete resolution_limits from lm75_data and include them in the structure described above. * Add a pointer to the configuration parameters structure to be used as a reference to obtain the parameters. * Delete switch-case approach to get the device configuration parameters. * The structure is cleaner and easier to maintain. Signed-off-by:
-
amy.shih authored
NCT-7904D also supports reading of channel limitation registers as well as SMI status registers for fan, voltage and temperature monitoring. It also supports reading the temperature sensor type (thermal diode, thermistor, AMD SB-TSI or Intel PECI). Add the following sysfs nodes: -fan[1-*]_min -fan[1-*]_alarm -in[1-*]_min -in[1-*]_max -in[1-*]_alarm -temp[1-*]_max -temp[1-*]_max_hyst -temp[1-*]_emergency -temp[1-*]_emergency_hyst -temp[1-*]_alarm -temp[1-*]_type Signed-off-by:
-
Jean Delvare authored
I have been using SENSORS_W83795_FANCTRL for several years and never had any problem. When the driver was added, I had not tested that part of the driver yet so I wanted to be super cautious, but time has shown that it works just fine. In the long run I even believe that we should drop the option and enable the feature unconditionally. It doesn't do anything until the user explicitly starts twiddling with sysfs attributes anyway. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Link: https://lore.kernel.org/r/20190806102123.3118bcc5@endymionSigned-off-by:
-
Stephen Boyd authored
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-hwmon@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:Stephen Boyd <swboyd@chromium.org> [groeck: Dropped jz4740-hwmon.c (driver is being removed)] Signed-off-by:
-
Wang Shenran authored
At boot time, the acpi_power_meter driver logs the following error level message: "Ignoring unsafe software power cap". Having read about it from a few sources, it seems that the error message can be quite misleading. While the message can imply that Linux is ignoring the fact that the system is operating in potentially dangerous conditions, the truth is the driver found an ACPI_PMC object that supports software power capping. The driver simply decides not to use it, perhaps because it doesn't support the object. The best solution is probably changing the log level from error to warning. All sources I have found, regarding the error, have downplayed its significance. There is not much of a reason for it to be on error level, while causing potential confusions or misinterpretations. Signed-off-by:
Wang Shenran <shenran268@gmail.com> Link: https://lore.kernel.org/r/20190724080110.6952-1-shenran268@gmail.comSigned-off-by:
-
Björn Gerhart authored
Add support for NCT6116D to nct6775 driver. Signed-off-by:
Bjoern Gerhart <gerhart@posteo.de> Signed-off-by:
-
Grant McEwan authored
hwmon_device_register() is a deprecated function and produces a warning. Converting the driver to use the hwmon_device_register_with_groups() instead. Signed-off-by:
Grant McEwan <grant.mcewan@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20190721225530.28799-2-grant.mcewan@alliedtelesis.co.nzSigned-off-by:
-
Wolfram Sang authored
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an ERRPTR which we use in error handling. Signed-off-by:
-
Wolfram Sang authored
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an ERRPTR which we use in error handling. Signed-off-by:
-
Wolfram Sang authored
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an ERRPTR which we use in error handling. Signed-off-by:
-
Marcel Bocu authored
It would seem like model 70h is behaving in the same way as model 30h, so let's just add the new F3 PCI ID to the list of compatible devices. Unlike previous Ryzen/Threadripper, Ryzen gen 3 processors do not need temperature offsets anymore. This has been reported in the press and verified on my Ryzen 3700X by checking that the idle temperature reported by k10temp is matching the temperature reported by the firmware. Vicki Pfau sent an identical patch after I checked that no-one had written this patch. I would have been happy about dropping my patch but unlike for his patch series, I had already Cc:ed the x86 people and they already reviewed the changes. Since Vicki has not answered to any email after his initial series, let's assume she is on vacation and let's avoid duplication of reviews from the maintainers and merge my series. To acknowledge Vicki's anteriority, I added her S-o-b to the patch. v2, suggested by Guenter Roeck and Brian Woods: - rename from 71h to 70h Signed-off-by:
Vicki Pfau <vi@endrift.com> Signed-off-by:
Marcel Bocu <marcel.p.bocu@gmail.com> Tested-by:
-
Marcel Bocu authored
The AMD Ryzen gen 3 processors came with a different PCI IDs for the function 3 & 4 which are used to access the SMN interface. The root PCI address however remained at the same address as the model 30h. Adding the F3/F4 PCI IDs respectively to the misc and link ids appear to be sufficient for k10temp, so let's add them and follow up on the patch if other functions need more tweaking. Vicki Pfau sent an identical patch after I checked that no-one had written this patch. I would have been happy about dropping my patch but unlike for his patch series, I had already Cc:ed the x86 people and they already reviewed the changes. Since Vicki has not answered to any email after his initial series, let's assume she is on vacation and let's avoid duplication of reviews from the maintainers and merge my series. To acknowledge Vicki's anteriority, I added her S-o-b to the patch. v2, suggested by Guenter Roeck and Brian Woods: - rename from 71h to 70h Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Brian Woods <brian.woods@amd.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_ids.h Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: "Woods, Brian" <Brian.Woods@amd.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-hwmon@vger.kernel.org Link: https://lore.kernel.org/r/20190722174510.2179-1-marcel.p.bocu@gmail.comSigned-off-by:
-
Mauro Carvalho Chehab authored
This document was recently introduced. Convert it to ReST just like the other hwmon documents, adding it to the hwmon index. Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Link: https://lore.kernel.org/r/657bf022625e0888d3becf10c78d162eeb864608.1563792334.git.mchehab+samsung@kernel.orgSigned-off-by:
-
Robert Karszniewicz authored
Removes: - hwmon_dev from k8temp_data struct, as that is now passed to callbacks, anyway. - other k8temp_data struct fields, too. - k8temp_update_device() Also reduces binary size: text data bss dec hex filename 4139 1448 0 5587 15d3 drivers/hwmon/k8temp.ko.bak 3103 1220 0 4323 10e3 drivers/hwmon/k8temp.ko Signed-off-by:
Robert Karszniewicz <avoidr@firemail.cc> Signed-off-by:
Robert Karszniewicz <avoidr@riseup.net> Link: https://lore.kernel.org/r/20190721120051.28064-1-avoidr@riseup.netSigned-off-by:
-
