- 30 Sep, 2016 40 commits
-
-
Paul Burton authored
commit b03c1e3b upstream. Commit c1a0e9bc ("MIPS: Allow compact branch policy to be changed") added Kconfig entries allowing for the compact branch policy used by the compiler for MIPSr6 kernels to be specified. This can be useful for debugging, particularly in systems where compact branches have recently been introduced. Unfortunately mainline gcc 5.x supports MIPSr6 but not the -mcompact-branches compiler flag, leading to MIPSr6 kernels failing to build with gcc 5.x with errors such as: mipsel-linux-gnu-gcc: error: unrecognized command line option '-mcompact-branches=optimal' make[2]: *** [kernel/bounds.s] Error 1 Fixing this by hiding the Kconfig entry behind another seems to be more hassle than it's worth, as MIPSr6 & compact branches have been around for a while now and if policy does need to be set for debug it can be done easily enough with KCFLAGS. Therefore remove the compact branch policy Kconfig entries & their handling in the Makefile. This reverts commit c1a0e9bc ("MIPS: Allow compact branch policy to be changed"). Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Reported-by:
kbuild test robot <fengguang.wu@intel.com> Fixes: c1a0e9bc ("MIPS: Allow compact branch policy to be changed") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14241/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
James Hogan authored
commit 554af0c3 upstream. The page structures associated with the vDSO pages in the kernel image are calculated using virt_to_page(), which uses __pa() under the hood to find the pfn associated with the virtual address. The vDSO data pointers however point to kernel symbols, so __pa_symbol() should really be used instead. Since there is no equivalent to virt_to_page() which uses __pa_symbol(), fix init_vdso_image() to work directly with pfns, calculated with __phys_to_pfn(__pa_symbol(...)). This issue broke the Malta Enhanced Virtual Addressing (EVA) configuration which has a non-default implementation of __pa_symbol(). This is because it uses a physical alias so that the kernel executes from KSeg0 (VA 0x80000000 -> PA 0x00000000), while RAM is provided to the kernel in the KUSeg range (VA 0x00000000 -> PA 0x80000000) which uses the same underlying RAM. Since there are no page structures associated with the low physical address region, some arbitrary kernel memory would be interpreted as a page structure for the vDSO pages and badness ensues. Fixes: ebb5e78c ("MIPS: Initial implementation of a VDSO") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14229/Signed-off-by:
-
Matt Redfearn authored
commit 8f46cca1 upstream. This patch fixes the possibility of a deadlock when bringing up secondary CPUs. The deadlock occurs because the set_cpu_online() is called before synchronise_count_slave(). This can cause a deadlock if the boot CPU, having scheduled another thread, attempts to send an IPI to the secondary CPU, which it sees has been marked online. The secondary is blocked in synchronise_count_slave() waiting for the boot CPU to enter synchronise_count_master(), but the boot cpu is blocked in smp_call_function_many() waiting for the secondary to respond to it's IPI request. Fix this by marking the CPU online in cpu_callin_map and synchronising counters before declaring the CPU online and calculating the maps for IPIs. Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Reported-by:
Justin Chen <justinpopo6@gmail.com> Tested-by:
-
Paul Burton authored
commit 7e956304 upstream. In the mipsr2_decoder() function, used to emulate pre-MIPSr6 instructions that were removed in MIPSr6, the init_fpu() function is called if a removed pre-MIPSr6 floating point instruction is the first floating point instruction used by the task. However, init_fpu() performs varous actions that rely upon not being migrated. For example in the most basic case it sets the coprocessor 0 Status.CU1 bit to enable the FPU & then loads FP register context into the FPU registers. If the task were to migrate during this time, it may end up attempting to load FP register context on a different CPU where it hasn't set the CU1 bit, leading to errors such as: do_cpu invoked from kernel context![#2]: CPU: 2 PID: 7338 Comm: fp-prctl Tainted: G D 4.7.0-00424-g49b0c82 #2 task: 838e4000 ti: 88d38000 task.ti: 88d38000 $ 0 : 00000000 00000001 ffffffff 88d3fef8 $ 4 : 838e4000 88d38004 00000000 00000001 $ 8 : 3400fc01 801f8020 808e9100 24000000 $12 : dbffffff 807b69d8 807b0000 00000000 $16 : 00000000 80786150 00400fc4 809c0398 $20 : 809c0338 0040273c 88d3ff28 808e9d30 $24 : 808e9d30 00400fb4 $28 : 88d38000 88d3fe88 00000000 8011a2ac Hi : 0040273c Lo : 88d3ff28 epc : 80114178 _restore_fp+0x10/0xa0 ra : 8011a2ac mipsr2_decoder+0xd5c/0x1660 Status: 1400fc03 KERNEL EXL IE Cause : 1080002c (ExcCode 0b) PrId : 0001a920 (MIPS I6400) Modules linked in: Process fp-prctl (pid: 7338, threadinfo=88d38000, task=838e4000, tls=766527d0) Stack : 00000000 00000000 00000000 88d3fe98 00000000 00000000 809c0398 809c0338 808e9100 00000000 88d3ff28 00400fc4 00400fc4 0040273c 7fb69e18 004a0000 004a0000 004a0000 7664add0 8010de18 00000000 00000000 88d3fef8 88d3ff28 808e9100 00000000 766527d0 8010e534 000c0000 85755000 8181d580 00000000 00000000 00000000 004a0000 00000000 766527d0 7fb69e18 004a0000 80105c20 ... Call Trace: [<80114178>] _restore_fp+0x10/0xa0 [<8011a2ac>] mipsr2_decoder+0xd5c/0x1660 [<8010de18>] do_ri+0x90/0x6b8 [<80105c20>] ret_from_exception+0x0/0x10 Fix this by disabling preemption around the call to init_fpu(), ensuring that it starts & completes on one CPU. Signed-off-by:
-
Sudeep Holla authored
commit 331dcf42 upstream. If the i2c device is already runtime suspended, if qup_i2c_suspend is executed during suspend-to-idle or suspend-to-ram it will result in the following splat: WARNING: CPU: 3 PID: 1593 at drivers/clk/clk.c:476 clk_core_unprepare+0x80/0x90 Modules linked in: CPU: 3 PID: 1593 Comm: bash Tainted: G W 4.8.0-rc3 #14 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) PC is at clk_core_unprepare+0x80/0x90 LR is at clk_unprepare+0x28/0x40 pc : [<ffff0000086eecf0>] lr : [<ffff0000086f0c58>] pstate: 60000145 Call trace: clk_core_unprepare+0x80/0x90 qup_i2c_disable_clocks+0x2c/0x68 qup_i2c_suspend+0x10/0x20 platform_pm_suspend+0x24/0x68 ... This patch fixes the issue by executing qup_i2c_pm_suspend_runtime conditionally in qup_i2c_suspend. Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Reviewed-by:
Andy Gross <andy.gross@linaro.org> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Yadi.hu authored
commit 371a0153 upstream. the eg20t driver call request_irq() function before the pch_base_address, base address of i2c controller's register, is assigned an effective value. there is one possible scenario that an interrupt which isn't inside eg20t arrives immediately after request_irq() is executed when i2c controller shares an interrupt number with others. since the interrupt handler pch_i2c_handler() has already active as shared action, it will be called and read its own register to determine if this interrupt is from itself. At that moment, since base address of i2c registers is not remapped in kernel space yet,so the INT handler will access an illegal address and then a error occurs. Signed-off-by:
Yadi.hu <yadi.hu@windriver.com> Signed-off-by:
-
Jeff Mahoney authored
commit 325c50e3 upstream. If the subvol/snapshot create/destroy ioctls are passed a regular file with execute permissions set, we'll eventually Oops while trying to do inode->i_op->lookup via lookup_one_len. This patch ensures that the file descriptor refers to a directory. Fixes: cb8e7090 (Btrfs: Fix subvolume creation locking rules) Fixes: 76dda93c (Btrfs: add snapshot/subvolume destroy ioctl) Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Johannes Berg authored
commit ad5987b4 upstream. Due to an apparent copy/paste bug, the number of counters for the beacon configuration were checked twice, instead of checking the number of probe response counters. Fix this to check the number of probe response counters before parsing those. Fixes: 9a774c78 ("cfg80211: Support multiple CSA counters") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Fabio Estevam authored
commit 4de349e7 upstream. On a imx6ul-pico board the following error is seen during system suspend: dpm_run_callback(): platform_pm_resume+0x0/0x54 returns -110 PM: Device 2090000.flexcan failed to resume: error -110 The reason for this suspend error is because when the CAN interface is not active the clocks are disabled and then flexcan_chip_enable() will always fail due to a timeout error. In order to fix this issue, only call flexcan_chip_enable/disable() when the CAN interface is active. Based on a patch from Dong Aisheng in the NXP kernel. Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Hugh Dickins authored
commit b385d21f upstream. init_tlb_ubc() looked unnecessary to me: tlb_ubc is statically initialized with zeroes in the init_task, and copied from parent to child while it is quiescent in arch_dup_task_struct(); so I went to delete it. But inserted temporary debug WARN_ONs in place of init_tlb_ubc() to check that it was always empty at that point, and found them firing: because memcg reclaim can recurse into global reclaim (when allocating biosets for swapout in my case), and arrive back at the init_tlb_ubc() in shrink_node_memcg(). Resetting tlb_ubc.flush_required at that point is wrong: if the upper level needs a deferred TLB flush, but the lower level turns out not to, we miss a TLB flush. But fortunately, that's the only part of the protocol that does not nest: with the initialization removed, cpumask collects bits from upper and lower levels, and flushes TLB when needed. Fixes: 72b252ae ("mm: send one IPI per CPU to TLB flush all entries after unmapping pages") Signed-off-by:
Hugh Dickins <hughd@google.com> Acked-by:
Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 1245800c upstream. The iter->seq can be reset outside the protection of the mutex. So can reading of user data. Move the mutex up to the beginning of the function. Fixes: d7350c3f ("tracing/core: make the read callbacks reentrants") Reported-by:
Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Al Viro authored
commit 1ae2293d upstream. Signed-off-by:
-
Arvind Yadav authored
commit bae170ef upstream. Free memory mapping, if probe is not successful. Fixes: 4a9b3737 ("power: reset: move hisilicon reboot code") Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Dan Carpenter authored
commit 79ad07d4 upstream. There is a cut and paste issue here. The bug is that we are allocating more memory than necessary for msp_maps. We should be allocating enough space for a map_info struct (144 bytes) but we instead allocate enough for an mtd_info struct (1840 bytes). It's a small waste. The other part of this is not harmful but when we allocated msp_flash then we allocated enough space fro a map_info pointer instead of an mtd_info pointer. But since pointers are the same size it works out fine. Anyway, I decided to clean up all three allocations a bit to make them a bit more consistent and clear. Fixes: 68aa0fa8 ('[MTD] PMC MSP71xx flash/rootfs mappings') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Dan Carpenter authored
commit dc01a28d upstream. We check for NULL but then dereference "info->mtd" on the next line. Fixes: 72169755 ('mtd: maps: sa1100-flash: show parent device in sysfs') Signed-off-by:
-
Al Viro authored
commit e23d4159 upstream. Switching iov_iter fault-in to multipages variants has exposed an old bug in underlying fault_in_multipages_...(); they break if the range passed to them wraps around. Normally access_ok() done by callers will prevent such (and it's a guaranteed EFAULT - ERR_PTR() values fall into such a range and they should not point to any valid objects). However, on architectures where userland and kernel live in different MMU contexts (e.g. s390) access_ok() is a no-op and on those a range with a wraparound can reach fault_in_multipages_...(). Since any wraparound means EFAULT there, the fix is trivial - turn those while (uaddr <= end) ... into if (unlikely(uaddr > end)) return -EFAULT; do ... while (uaddr <= end); Reported-by:
Jan Stancek <jstancek@redhat.com> Tested-by:
-
Jan Kara authored
commit 96d41019 upstream. fanotify_get_response() calls fsnotify_remove_event() when it finds that group is being released from fanotify_release() (bypass_perm is set). However the event it removes need not be only in the group's notification queue but it can have already moved to access_list (userspace read the event before closing the fanotify instance fd) which is protected by a different lock. Thus when fsnotify_remove_event() races with fanotify_release() operating on access_list, the list can get corrupted. Fix the problem by moving all the logic removing permission events from the lists to one place - fanotify_release(). Fixes: 5838d444 ("fanotify: fix double free of pending permission events") Link: http://lkml.kernel.org/r/1473797711-14111-3-git-send-email-jack@suse.czSigned-off-by:
Jan Kara <jack@suse.cz> Reported-by:
Miklos Szeredi <mszeredi@redhat.com> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Jan Kara authored
commit 12703dbf upstream. Implement a function that can be called when a group is being shutdown to stop queueing new events to the group. Fanotify will use this. Fixes: 5838d444 ("fanotify: fix double free of pending permission events") Link: http://lkml.kernel.org/r/1473797711-14111-2-git-send-email-jack@suse.czSigned-off-by:
-
Brian Foster authored
commit 800b2694 upstream. xfs_wait_buftarg() waits for all pending I/O, drains the ioend completion workqueue and walks the LRU until all buffers in the cache have been released. This is traditionally an unmount operation` but the mechanism is also reused during filesystem freeze. xfs_wait_buftarg() invokes drain_workqueue() as part of the quiesce, which is intended more for a shutdown sequence in that it indicates to the queue that new operations are not expected once the drain has begun. New work jobs after this point result in a WARN_ON_ONCE() and are otherwise dropped. With filesystem freeze, however, read operations are allowed and can proceed during or after the workqueue drain. If such a read occurs during the drain sequence, the workqueue infrastructure complains about the queued ioend completion work item and drops it on the floor. As a result, the buffer remains on the LRU and the freeze never completes. Despite the fact that the overall buffer cache cleanup is not necessary during freeze, fix up this operation such that it is safe to invoke during non-unmount quiesce operations. Replace the drain_workqueue() call with flush_workqueue(), which runs a similar serialization on pending workqueue jobs without causing new jobs to be dropped. This is safe for unmount as unmount independently locks out new operations by the time xfs_wait_buftarg() is invoked. cc: <stable@vger.kernel.org> Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Ian Kent authored
commit 7cbdb4a2 upstream. Somewhere along the way the autofs expire operation has changed to hold a spin lock over expired dentry selection. The autofs indirect mount expired dentry selection is complicated and quite lengthy so it isn't appropriate to hold a spin lock over the operation. Commit 47be6184 ("fs/dcache.c: avoid soft-lockup in dput()") added a might_sleep() to dput() causing a WARN_ONCE() about this usage to be issued. But the spin lock doesn't need to be held over this check, the autofs dentry info. flags are enough to block walks into dentrys during the expire. I've left the direct mount expire as it is (for now) because it is much simpler and quicker than the indirect mount expire and adding spin lock release and re-aquires would do nothing more than add overhead. Fixes: 47be6184 ("fs/dcache.c: avoid soft-lockup in dput()") Link: http://lkml.kernel.org/r/20160912014017.1773.73060.stgit@pluto.themaw.netSigned-off-by:
Ian Kent <raven@themaw.net> Reported-by:
Takashi Iwai <tiwai@suse.de> Tested-by:
-
Al Viro authored
commit ea01a184 upstream. * make autofs4_expire_indirect() skip the dentries being in process of expiry * do *not* mess with list_move(); making sure that dentry with AUTOFS_INF_EXPIRING are not picked for expiry is enough. * do not remove NO_RCU when we set EXPIRING, don't bother with smp_mb() there. Clear it at the same time we clear EXPIRING. Makes a bunch of tests simpler. * rename NO_RCU to WANT_EXPIRE, which is what it really is. Signed-off-by:
-
Thierry Reding authored
commit ff01c944 upstream. Commit d1cd2142 ("pwm: Set enable state properly on failed call to enable") introduced a mutex that is needed to protect internal state of PWM devices. Since that mutex is acquired in pwm_set_polarity() and in pwm_enable() and might potentially block, all PWM devices effectively become "might sleep". It's rather pointless to keep the .can_sleep field around, but given that there are external users let's postpone the removal for the next release cycle. Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org>
-
Davide Caratti authored
[ Upstream commit 9264251e ] commit bc8c20ac ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave") seems to have accidentally reverted commit 47cc84ce ("bridge: fix parsing of MLDv2 reports"). This commit brings back a change to br_ip6_multicast_mld2_report() where parsing of MLDv2 reports stops when the first group is successfully added to the MDB cache. Fixes: bc8c20ac ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave") Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by:
Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Russell King authored
[ Upstream commit 2fb04fdf ] Commit b70661c7 ("net: smc91x: use run-time configuration on all ARM machines") broke some ARM platforms through several mistakes. Firstly, the access size must correspond to the following rule: (a) at least one of 16-bit or 8-bit access size must be supported (b) 32-bit accesses are optional, and may be enabled in addition to the above. Secondly, it provides no emulation of 16-bit accesses, instead blindly making 16-bit accesses even when the platform specifies that only 8-bit is supported. Reorganise smc91x.h so we can make use of the existing 16-bit access emulation already provided - if 16-bit accesses are supported, use 16-bit accesses directly, otherwise if 8-bit accesses are supported, use the provided 16-bit access emulation. If neither, BUG(). This exactly reflects the driver behaviour prior to the commit being fixed. Since the conversion incorrectly cut down the available access sizes on several platforms, we also need to go through every platform and fix up the overly-restrictive access size: Arnd assumed that if a platform can perform 32-bit, 16-bit and 8-bit accesses, then only a 32-bit access size needed to be specified - not so, all available access sizes must be specified. This likely fixes some performance regressions in doing this: if a platform does not support 8-bit accesses, 8-bit accesses have been emulated by performing a 16-bit read-modify-write access. Tested on the Intel Assabet/Neponset platform, which supports only 8-bit accesses, which was broken by the original commit. Fixes: b70661c7 ("net: smc91x: use run-time configuration on all ARM machines") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Tested-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Xander Huff authored
[ Upstream commit c3e70edd ] This reverts: commit 33c133cc ("phy: IRQ cannot be shared") On hardware with multiple PHY devices hooked up to the same IRQ line, allow them to share it. Sergei Shtylyov says: "I'm not sure now what was the reason I concluded that the IRQ sharing was impossible... most probably I thought that the kernel IRQ handling code exited the loop over the IRQ actions once IRQ_HANDLED was returned -- which is obviously not so in reality..." Signed-off-by:
Xander Huff <xander.huff@ni.com> Signed-off-by:
Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 4f101c47 ] We kept shadow copies of which interrupt sources we have enabled and disabled, but due to an order bug in how intrl2_mask_clear was defined, we could run into the following scenario: CPU0 CPU1 intrl2_1_mask_clear(..) sets INTRL2_CPU_MASK_CLEAR bcm_sf2_switch_1_isr read INTRL2_CPU_STATUS and masks with stale irq1_mask value updates irq1_mask value Which would make us loop again and again trying to process and interrupt we are not clearing since our copy of whether it was enabled before still indicates it was not. Fix this by updating the shadow copy first, and then unasking at the HW level. Fixes: 246d7f77 ("net: dsa: add Broadcom SF2 switch driver") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Paul Blakey authored
[ Upstream commit 2c0f8ce1 ] Set and verify signature calculates the signature for each of the mailbox nodes, even for those that are unused (from cache). Added a missing length check to set and verify only those which are used. While here, also moved the setting of msg's nodes token to where we already go over them. This saves a pass because checksum is disabled, and the only useful thing remaining that set signature does is setting the token. Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by:
Paul Blakey <paulb@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Vegard Nossum authored
[ Upstream commit d2fbdf76 ] tipc_msg_create() can return a NULL skb and if so, we shouldn't try to call tipc_node_xmit_skb() on it. general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 3 PID: 30298 Comm: trinity-c0 Not tainted 4.7.0-rc7+ #19 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff8800baf09980 ti: ffff8800595b8000 task.ti: ffff8800595b8000 RIP: 0010:[<ffffffff830bb46b>] [<ffffffff830bb46b>] tipc_node_xmit_skb+0x6b/0x140 RSP: 0018:ffff8800595bfce8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000003023b0e0 RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffffffff83d12580 RBP: ffff8800595bfd78 R08: ffffed000b2b7f32 R09: 0000000000000000 R10: fffffbfff0759725 R11: 0000000000000000 R12: 1ffff1000b2b7f9f R13: ffff8800595bfd58 R14: ffffffff83d12580 R15: dffffc0000000000 FS: 00007fcdde242700(0000) GS:ffff88011af80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcddde1db10 CR3: 000000006874b000 CR4: 00000000000006e0 DR0: 00007fcdde248000 DR1: 00007fcddd73d000 DR2: 00007fcdde248000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000090602 Stack: 0000000000000018 0000000000000018 0000000041b58ab3 ffffffff83954208 ffffffff830bb400 ffff8800595bfd30 ffffffff8309d767 0000000000000018 0000000000000018 ffff8800595bfd78 ffffffff8309da1a 00000000810ee611 Call Trace: [<ffffffff830c84a3>] tipc_shutdown+0x553/0x880 [<ffffffff825b4a3b>] SyS_shutdown+0x14b/0x170 [<ffffffff8100334c>] do_syscall_64+0x19c/0x410 [<ffffffff83295ca5>] entry_SYSCALL64_slow_path+0x25/0x25 Code: 90 00 b4 0b 83 c7 00 f1 f1 f1 f1 4c 8d 6d e0 c7 40 04 00 00 00 f4 c7 40 08 f3 f3 f3 f3 48 89 d8 48 c1 e8 03 c7 45 b4 00 00 00 00 <80> 3c 30 00 75 78 48 8d 7b 08 49 8d 75 c0 48 b8 00 00 00 00 00 RIP [<ffffffff830bb46b>] tipc_node_xmit_skb+0x6b/0x140 RSP <ffff8800595bfce8> ---[ end trace 57b0484e351e71f1 ]--- I feel like we should maybe return -ENOMEM or -ENOBUFS, but I'm not sure userspace is equipped to handle that. Anyway, this is better than a GPF and looks somewhat consistent with other tipc_msg_create() callers. Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Vegard Nossum authored
[ Upstream commit 5ba092ef ] If iriap_register_lsap() fails to allocate memory, self->lsap is set to NULL. However, none of the callers handle the failure and irlmp_connect_request() will happily dereference it: iriap_register_lsap: Unable to allocated LSAP! ================================================================================ UBSAN: Undefined behaviour in net/irda/irlmp.c:378:2 member access within null pointer of type 'struct lsap_cb' CPU: 1 PID: 15403 Comm: trinity-c0 Not tainted 4.8.0-rc1+ #81 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 0000000000000000 ffff88010c7e78a8 ffffffff82344f40 0000000041b58ab3 ffffffff84f98000 ffffffff82344e94 ffff88010c7e78d0 ffff88010c7e7880 ffff88010630ad00 ffffffff84a5fae0 ffffffff84d3f5c0 000000000000017a Call Trace: [<ffffffff82344f40>] dump_stack+0xac/0xfc [<ffffffff8242f5a8>] ubsan_epilogue+0xd/0x8a [<ffffffff824302bf>] __ubsan_handle_type_mismatch+0x157/0x411 [<ffffffff83b7bdbc>] irlmp_connect_request+0x7ac/0x970 [<ffffffff83b77cc0>] iriap_connect_request+0xa0/0x160 [<ffffffff83b77f48>] state_s_disconnect+0x88/0xd0 [<ffffffff83b78904>] iriap_do_client_event+0x94/0x120 [<ffffffff83b77710>] iriap_getvaluebyclass_request+0x3e0/0x6d0 [<ffffffff83ba6ebb>] irda_find_lsap_sel+0x1eb/0x630 [<ffffffff83ba90c8>] irda_connect+0x828/0x12d0 [<ffffffff833c0dfb>] SYSC_connect+0x22b/0x340 [<ffffffff833c7e09>] SyS_connect+0x9/0x10 [<ffffffff81007bd3>] do_syscall_64+0x1b3/0x4b0 [<ffffffff845f946a>] entry_SYSCALL64_slow_path+0x25/0x25 ================================================================================ The bug seems to have been around since forever. There's more problems with missing error checks in iriap_init() (and indeed all of irda_init()), but that's a bigger problem that needs very careful review and testing. This patch will fix the most serious bug (as it's easily reached from unprivileged userspace). I have tested my patch with a reproducer. Signed-off-by:
-
Lance Richardson authored
[ Upstream commit a5d0dc81 ] When executing the script included below, the netns delete operation hangs with the following message (repeated at 10 second intervals): kernel:unregister_netdevice: waiting for lo to become free. Usage count = 1 This occurs because a reference to the lo interface in the "secure" netns is still held by a dst entry in the xfrm bundle cache in the init netns. Address this problem by garbage collecting the tunnel netns flow cache when a cross-namespace vti interface receives a NETDEV_DOWN notification. A more detailed description of the problem scenario (referencing commands in the script below): (1) ip link add vti_test type vti local 1.1.1.1 remote 1.1.1.2 key 1 The vti_test interface is created in the init namespace. vti_tunnel_init() attaches a struct ip_tunnel to the vti interface's netdev_priv(dev), setting the tunnel net to &init_net. (2) ip link set vti_test netns secure The vti_test interface is moved to the "secure" netns. Note that the associated struct ip_tunnel still has tunnel->net set to &init_net. (3) ip netns exec secure ping -c 4 -i 0.02 -I 192.168.100.1 192.168.200.1 The first packet sent using the vti device causes xfrm_lookup() to be called as follows: dst = xfrm_lookup(tunnel->net, skb_dst(skb), fl, NULL, 0); Note that tunnel->net is the init namespace, while skb_dst(skb) references the vti_test interface in the "secure" namespace. The returned dst references an interface in the init namespace. Also note that the first parameter to xfrm_lookup() determines which flow cache is used to store the computed xfrm bundle, so after xfrm_lookup() returns there will be a cached bundle in the init namespace flow cache with a dst referencing a device in the "secure" namespace. (4) ip netns del secure Kernel begins to delete the "secure" namespace. At some point the vti_test interface is deleted, at which point dst_ifdown() changes the dst->dev in the cached xfrm bundle flow from vti_test to lo (still in the "secure" namespace however). Since nothing has happened to cause the init namespace's flow cache to be garbage collected, this dst remains attached to the flow cache, so the kernel loops waiting for the last reference to lo to go away. <Begin script> ip link add br1 type bridge ip link set dev br1 up ip addr add dev br1 1.1.1.1/8 ip netns add secure ip link add vti_test type vti local 1.1.1.1 remote 1.1.1.2 key 1 ip link set vti_test netns secure ip netns exec secure ip link set vti_test up ip netns exec secure ip link s lo up ip netns exec secure ip addr add dev lo 192.168.100.1/24 ip netns exec secure ip route add 192.168.200.0/24 dev vti_test ip xfrm policy flush ip xfrm state flush ip xfrm policy add dir out tmpl src 1.1.1.1 dst 1.1.1.2 \ proto esp mode tunnel mark 1 ip xfrm policy add dir in tmpl src 1.1.1.2 dst 1.1.1.1 \ proto esp mode tunnel mark 1 ip xfrm state add src 1.1.1.1 dst 1.1.1.2 proto esp spi 1 \ mode tunnel enc des3_ede 0x112233445566778811223344556677881122334455667788 ip xfrm state add src 1.1.1.2 dst 1.1.1.1 proto esp spi 1 \ mode tunnel enc des3_ede 0x112233445566778811223344556677881122334455667788 ip netns exec secure ping -c 4 -i 0.02 -I 192.168.100.1 192.168.200.1 ip netns del secure <End script> Reported-by:
Hangbin Liu <haliu@redhat.com> Reported-by:
Jan Tluka <jtluka@redhat.com> Signed-off-by:
Lance Richardson <lrichard@redhat.com> Signed-off-by:
-
Linus Torvalds authored
commit 6e1ce3c3 upstream. Right now we use the 'readlock' both for protecting some of the af_unix IO path and for making the bind be single-threaded. The two are independent, but using the same lock makes for a nasty deadlock due to ordering with regards to filesystem locking. The bind locking would want to nest outside the VSF pathname locking, but the IO locking wants to nest inside some of those same locks. We tried to fix this earlier with commit c845acb3 ("af_unix: Fix splice-bind deadlock") which moved the readlock inside the vfs locks, but that caused problems with overlayfs that will then call back into filesystem routines that take the lock in the wrong order anyway. Splitting the locks means that we can go back to having the bind lock be the outermost lock, and we don't have any deadlocks with lock ordering. Acked-by:
Rainer Weikusat <rweikusat@cyberadapt.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Linus Torvalds authored
commit 38f7bd94 upstream. This reverts commit c845acb3. It turns out that it just replaces one deadlock with another one: we can still get the wrong lock ordering with the readlock due to overlayfs calling back into the filesystem layer and still taking the vfs locks after the readlock. The proper solution ends up being to just split the readlock into two pieces: the bind lock (taken *outside* the vfs locks) and the IO lock (taken *inside* the filesystem locks). The two locks are independent anyway. Signed-off-by:
Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by:
-
Mahesh Bandewar authored
[ Upstream commit 24b27fc4 ] Following few steps will crash kernel - (a) Create bonding master > modprobe bonding miimon=50 (b) Create macvlan bridge on eth2 > ip link add link eth2 dev mvl0 address aa:0:0:0:0:01 \ type macvlan (c) Now try adding eth2 into the bond > echo +eth2 > /sys/class/net/bond0/bonding/slaves <crash> Bonding does lots of things before checking if the device enslaved is busy or not. In this case when the notifier call-chain sends notifications, the bond_netdev_event() assumes that the rx_handler /rx_handler_data is registered while the bond_enslave() hasn't progressed far enough to register rx_handler for the new slave. This patch adds a rx_handler check that can be performed right at the beginning of the enslave code to avoid getting into this situation. Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Maurizio Lombardi authored
commit 546e559c upstream. The pd_seq_sync pointer can't be NULL, we have to check its entries instead. Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Acked-by:
Sumit Saxena <sumit.saxena@broadcom.com> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Arnd Bergmann authored
commit 86d65b7e upstream. gcc-6 warns about code in the nouveau driver that is obviously silly: drivers/gpu/drm/nouveau/nvkm/engine/pm/nv40.c: In function 'nv40_perfctr_next': drivers/gpu/drm/nouveau/nvkm/engine/pm/nv40.c:62:19: warning: self-comparison always evaluats to false [-Wtautological-compare] if (pm->sequence != pm->sequence) { The behavior was accidentally introduced in a patch described as "This is purely preparation for upcoming commits, there should be no code changes here.". As far as I can tell, that was true for the rest of that patch except for this one function, which has been changed to a NOP. This patch restores the original behavior. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 8c1aeaa1 ("drm/nouveau/pm: cosmetic changes") Reviewed-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Colin Ian King authored
commit b6acb0cf upstream. Fix indent warning when building with gcc 6: drivers/staging/iio/adc/ad7192.c:239:4: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation] Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
commit 2cce76c3 upstream. gcc-6 warns about code in il3945_hw_txq_ctx_free() being somewhat ambiguous: drivers/net/wireless/intel/iwlegacy/3945.c:1022:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] This adds a set of curly braces to avoid the warning. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Arnd Bergmann authored
commit 362210e0 upstream. A cleanup patch in linux-3.18 moved around some code in the ath9k driver and left some code to be indented in a misleading way, made worse by the addition of some new code for p2p mode, as discovered by a new gcc-6 warning: drivers/net/wireless/ath/ath9k/init.c: In function 'ath9k_set_hw_capab': drivers/net/wireless/ath/ath9k/init.c:851:4: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation] hw->wiphy->iface_combinations = if_comb; ^~ drivers/net/wireless/ath/ath9k/init.c:847:3: note: ...this 'if' clause, but it is not if (ath9k_is_chanctx_enabled()) ^~ The code is in fact correct, but the indentation is not, so I'm reformatting it as it should have been after the original cleanup. Signed-off-by:
-
Arnd Bergmann authored
commit 0fb50400 upstream. gcc-6 points out an obviously silly comparison in vpfe_get_app_input_index(): drivers/media/platform/am437x/am437x-vpfe.c: In function 'vpfe_get_app_input_index': drivers/media/platform/am437x/am437x-vpfe.c:1709:27: warning: self-comparison always evaluats to true [-Wtautological-compare] client->adapter->nr == client->adapter->nr) { ^~ This was introduced in a slighly incorrect conversion, and it's clear that the comparison was meant to compare the iterator to the current subdev instead, as we do in the line above. Fixes: d3723239 ("[media] media: am437x-vpfe: match the OF node/i2c addr instead of name") Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Linus Torvalds authored
commit 194dc870 upstream. Some of our "for_each_xyz()" macro constructs make gcc unhappy about lack of braces around if-statements inside or outside the loop, because the loop construct itself has a "if-then-else" statement inside of it. The resulting warnings look something like this: drivers/gpu/drm/i915/i915_debugfs.c: In function ‘i915_dump_lrc’: drivers/gpu/drm/i915/i915_debugfs.c:2103:6: warning: suggest explicit braces to avoid ambiguous ‘else’ [-Wparentheses] if (ctx != dev_priv->kernel_context) ^ even if the code itself is fine. Since the warning is fairly easy to avoid by adding a braces around the if-statement near the for_each_xyz() construct, do so, rather than disabling the otherwise potentially useful warning. (The if-then-else statements used in the "for_each_xyz()" constructs are designed to be inherently safe even with no braces, but in this case it's quite understandable that gcc isn't really able to tell that). This finally leaves the standard "allmodconfig" build with just a handful of remaining warnings, so new and valid warnings hopefully will stand out. Signed-off-by:
-
