Pull perf fixes from Ingo Molnar:
 "Misc fixlets from all around the place"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/uncore: Fix IVT/SNB-EP uncore CBOX NID filter table
  perf/x86: Correctly use FEATURE_PDCM
  perf, nmi: Fix unknown NMI warning
  perf trace: Fix ioctl 'request' beautifier build problems on !(i386 || x86_64) arches
  perf trace: Add fallback definition of EFD_SEMAPHORE
  perf list: Fix checking for supported events on older kernels
  perf tools: Handle PERF_RECORD_HEADER_EVENT_TYPE properly
  perf probe: Do not add offset twice to uprobe address
  perf/x86: Fix Userspace RDPMC switch
  perf/x86/intel/p6: Add userspace RDPMC quirk for PPro

Pull hwmon fix from Guenter Roeck:
 "Fix writing the minimum temperature in max1668 driver"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (max1668) Fix writing the minimum temperature

Pull xfs fixes from Dave Chinner:
 "This is the first pull request I've had to do for you, so I'm still
  sorting things out.  The reason I'm sending this and not Ben should be
  obvious from the first commit below - SGI has stepped down from the
  XFS maintainership role.  As such, I'd like to take another
  opportunity to thank them for their many years of effort maintaining
  XFS and supporting the XFS community that they developed from the
  ground up.

  So I haven't had time to work things like signed tags into my
  workflows yet, so this is just a repo branch I'm asking you to pull
  from.  And yes, I named the branch -rc4 because I wanted the fixes in
  rc4, not because the branch was for merging into -rc3.  Probably not
  right, either.

  Anyway, I should have everything sorted out by the time the next merge
  window comes around.  If there's anything that you don't like in the
  pull req, feel free to flame me unmercifully.

  The changes are fixes for recent regressions and important thinkos in
  verification code:

        - a log vector buffer alignment issue on ia32
        - timestamps on truncate got mangled
        - primary superblock CRC validation fixes and error message
          sanitisation"

* 'xfs-fixes-for-3.14-rc4' of git://oss.sgi.com/xfs/xfs:
  xfs: limit superblock corruption errors to actual corruption
  xfs: skip verification on initial "guess" superblock read
  MAINTAINERS: SGI no longer maintaining XFS
  xfs: xfs_sb_read_verify() doesn't flag bad crcs on primary sb
  xfs: ensure correct log item buffer alignment
  xfs: ensure correct timestamp updates from truncate

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

  * Handle PERF_RECORD_HEADER_EVENT_TYPE properly. (Jiri Olsa)

  * Fix checking for supported events on older kernels in
    'perf list' (Vince Weaver)

  * Do not add offset twice to uprobe address in
    'perf probe' (Masami Hiramatsu)

  * Fix perf trace's ioctl 'request' beautifier build problems
    on !(i386 || x86_64) arches (Arnaldo Carvalho de Melo)

  * Fix 'perf trace' build by adding a fallback definition for
    EFD_SEMAPHORE (Ben Hutchings)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull devicetree fixes from Grant Likely:
 "Device tree compatible match order bug fix

  This branch contains a bug fix for the way devicetree code identifies
  the type of device.  Device drivers can contain a list of
  of_device_ids, but it more than one entry will match, then the device
  driver may choose the wrong one.  Commit 10535314, "match each node
  compatible against all given matches first", was queued for v3.14 but
  ended up causing other bugs.  Commit 06b29e76 attempted to fix it
  but it had other bugs.  Merely reverting the fix and waiting until
  v3.15 isn't a good option because there is code in v3.14 that depends
  on the revised behaviour to boot.

  This branch should finally fixes the problem correctly.  This time
  instead of just hoping that the patch is correct, this branch also
  adds new testcases that validate the behaviour.

  The changes in this branch are larger than I would like for a -rc
  pull, but moving the test case data out of out of arch/arm so that it
  could be validated on other architectures was important"

* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux:
  of: Add self test for of_match_node()
  of: Move testcase FDT data into drivers/of
  of: reimplement the matching method for __of_match_node()
  Revert "of: search the best compatible match first in __of_match_node()"

Pull watchdog fix from Wim Van Sebroeck:
 "It corrects the error code when no device was found for w83697hf_wdt"

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: w83697hf_wdt: return ENODEV if no device was found

This patch updates the CBOX PMU filters mapping tables for SNB-EP
and IVT (model 45 and 62 respectively).

The NID umask always comes in addition to another umask.
When set, the NID filter is applied.

The current mapping tables were missing some code/umask
combinations to account for the NID umask. This patch
fixes that.

Cc: mingo@elte.hu
Cc: ak@linux.intel.com
Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140219131018.GA24475@quadSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

The current code simply assumes Intel Arch PerfMon v2+ to have
the IA32_PERF_CAPABILITIES MSR; the SDM specifies that we should check
CPUID[1].ECX[15] (aka, FEATURE_PDCM) instead.

This was found by KVM which implements v2+ but didn't provide the
capabilities MSR. Change the code to DTRT; KVM will also implement the
MSR and return 0.

Cc: pbonzini@redhat.com
Reported-by: "Michael S. Tsirkin" <mst@redhat.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140203132903.GI8874@twins.programming.kicks-ass.netSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

When using BTS on Core i7-4*, I get the below kernel warning.

$ perf record -c 1 -e branches:u ls
Message from syslogd@labpc1501 at Nov 11 15:49:25 ...
 kernel:[  438.317893] Uhhuh. NMI received for unknown reason 31 on CPU 2.

Message from syslogd@labpc1501 at Nov 11 15:49:25 ...
 kernel:[  438.317920] Do you have a strange power saving mode enabled?

Message from syslogd@labpc1501 at Nov 11 15:49:25 ...
 kernel:[  438.317945] Dazed and confused, but trying to continue

Make intel_pmu_handle_irq() take the full exit path when returning early.

Cc: eranian@google.com
Cc: peterz@infradead.org
Cc: mingo@kernel.org
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1392425048-5309-1-git-send-email-andi@firstfloor.orgSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

Most WDT driver modules return ENODEV during modprobe if
no valid device was found, but w83697hf_wdt returns EIO.

Let w83697hf_wdt return ENODEV.
Signed-off-by: Stanislav Kholmanskikh <stanislav.kholmanskikh@oracle.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Pull sparc fixes from David Miller:
 "Three minor fixes from David Howells and Paul Gortmaker"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  Sparc: sparc_cpu_model isn't in asm/system.h any more [ver #2]
  sparc32: make copy_to/from_user_page() usable from modular code
  sparc32: fix build failure for arch_jump_label_transform

Pull ACPI and power management fixes from Rafael Wysocki:
 "These include two fixes for recent regressions related to ACPI, a
  cpufreq fix for breakage overlooked by a previous fix commit, two
  intel_pstate fixes for stuff added during the 3.13 cycle that need to
  go into -stable, three fixes for older bugs that also are -stable
  candidates, ACPI video blacklist changes related to BIOSes that behave
  in a special way on Windows 8, several build fixes for CONFIG_PM_SLEEP
  unset in ACPI drivers and an ACPI driver cleanup.

  Specifics:

   - Fix for a recent probing regression in the nouveau driver
     introduced by an ACPI change related to the handling of _DSM from
     Jiang Liu.

   - Fix for a dock station sysfs attribute that stopped working
     correctly after recent changes in the ACPI core.

   - cpufreq fix taking care of broken code related to CPU removal and
     overlooked by a previous recent fix in that area.  From Viresh
     Kumar.

   - Two intel_pstate fixes related to Baytrail support added during the
     3.13 cycle (candidates for -stable) from Dirk Brandewie.

   - ACPI video fix removing duplicate brightness values from the _BCL
     table which makes its user space interface behave sanely.  From
     Hans de Goede.

   - Fix for the powernow-k8 cpufreq driver making it initialize its
     per-CPU data structures correctly from Srivatsa S Bhat.

   - Fix for an obscure memory leak in the ACPI PCI interrupt allocation
     code (related to ISA) from Tomasz Nowicki.

   - ACPI video blacklist changes moving several systems that should use
     the native backlight interface instead of the ACPI one from the
     general ACPI _OSI blacklist the the ACPI video driver's blacklist
     where they belong.  This consists of an ACPI video driver update
     from Aaron Lu and a revert of a previous commit adding systems to
     the ACPI _OSI blacklist requested by Takashi Iwai.

   - Several fixes for build issues in ACPI drivers occuring when
     CONFIG_PM_SLEEP is unset from Shuah Khan.

   - Fix for an sscanf() format string in the ACPI Smart Battery
     Subsystem (SBS) driver from Luis G.F"

* tag 'pm+acpi-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  intel_pstate: Add support for Baytrail turbo P states
  intel_pstate: Use LFM bus ratio as min ratio/P state
  ACPI / nouveau: fix probing regression related to _DSM
  Revert "ACPI: Blacklist Win8 OSI for some HP laptop 2013 models"
  ACPI / video: Add systems that should favour native backlight interface
  ACPI / video: Filter the _BCL table for duplicate brightness values
  cpufreq: powernow-k8: Initialize per-cpu data-structures properly
  cpufreq: remove sysfs link when a cpu != policy->cpu, is removed
  ACPI / PCI: Fix memory leak in acpi_pci_irq_enable()
  ACPI / dock: Make 'docked' sysfs attribute work as documented
  ACPI / SBS: Fix incorrect sscanf() string
  ACPI / thermal: fix thermal driver compile error when CONFIG_PM_SLEEP is undefined
  ACPI / SBS: fix SBS driver compile error when CONFIG_PM_SLEEP is undefined
  ACPI / fan: fix fan driver compile error when CONFIG_PM_SLEEP is undefined
  ACPI / button: fix button driver compile error when CONFIG_PM_SLEEP is undefined
  ACPI / battery: fix battery driver compile error when CONFIG_PM_SLEEP is undefined
  ACPI / AC: fix AC driver compile error when CONFIG_PM_SLEEP is undefined

Pull IOMMU fixes from Joerg Roedel:
 "The fixes are only for the ARM-SMMU driver.  Here is the summary from
  Will Deacon:

   - Andreas Herrmann took the driver for a run with a real SATA
     controller, which caused the new mutex-based locking to explode
     since we require mappings in atomic context

   - Yifan fixed an issue with the page table creation, which then
     caused breakages with the way in which we flush descriptors out to
     the table walker

   - I ran the driver on a system where the SMMU is hooked into a
     coherent interconnect for table walks, and noticed a shareability
     mismatch between the CPU and the SMMU

  These issues are all fixed here and have been tested on both arm and
  arm64 based systems.

  Besides that I put a fix on-top to make the spinlock irq-safe, so that
  the code-paths can be used in the DMA-API"

* tag 'iommu-fixes-v3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  arm/smmu: Use irqsafe spinlock for domain lock
  iommu/arm-smmu: fix compilation issue when !CONFIG_ARM_AMBA
  iommu/arm-smmu: set CBARn.BPSHCFG to NSH for s1-s2-bypass contexts
  iommu/arm-smmu: fix table flushing during initial allocations
  iommu/arm-smmu: really fix page table locking
  iommu/arm-smmu: fix pud/pmd entry fill sequence

Pull sound fixes from Takashi Iwai:
 "This time we got a slightly higher volume than previous times, but all
  device-specific good fixes.  Noticeable changes are fixes in davinci,
  and the removal of open-codes in HD-audio ca0132 driver.  The rest are
  all small fixes and/or quirks"

* tag 'sound-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Enable front audio jacks on one HP desktop model
  ALSA: hda/ca0132 - Fix recording from mode id 0x8
  ALSA: hda/ca0132 - setup/cleanup streams
  ALSA: hda - add headset mic detect quirks for two Dell laptops
  ALSA: usb-audio: work around KEF X300A firmware bug
  ASoC: max98090: make REVISION_ID readable
  ASoC: txx9aclc_ac97: Fix kernel crash on probe
  ASoC: max98090: sync regcache on entering STANDBY
  ASoC: blackfin: Fix machine driver Kconfig dependencies
  ASoC: da9055: Fix device registration of PMIC and CODEC devices
  ASoC: fsl-esai: fix ESAI TDM slot setting
  ASoC: fsl: fix pm support of machine drivers
  ASoC: rt5640: Add ACPI ID for Intel Baytrail
  ASoC: davinci-evm: Add pm callbacks to platform driver
  ASoC: davinci-mcasp: Consolidate pm_runtime_get/put() use in the driver
  ASoC: davinci-mcasp: Configure xxTDM, xxFMT and xxFMCT registers synchronously
  ASoC: davinci-mcasp: Harmonize the sub hw_params function names
  ASoC: samsung: Fix trivial typo
  ASoC: samsung: Remove invalid dependencies
  ASoC: wm8993: drop regulator_bulk_free of devm_ allocated data

* pm-cpufreq:
  intel_pstate: Add support for Baytrail turbo P states
  intel_pstate: Use LFM bus ratio as min ratio/P state
  cpufreq: powernow-k8: Initialize per-cpu data-structures properly
  cpufreq: remove sysfs link when a cpu != policy->cpu, is removed

* acpi-pm:
  ACPI / thermal: fix thermal driver compile error when CONFIG_PM_SLEEP is undefined
  ACPI / SBS: fix SBS driver compile error when CONFIG_PM_SLEEP is undefined
  ACPI / fan: fix fan driver compile error when CONFIG_PM_SLEEP is undefined
  ACPI / button: fix button driver compile error when CONFIG_PM_SLEEP is undefined
  ACPI / battery: fix battery driver compile error when CONFIG_PM_SLEEP is undefined
  ACPI / AC: fix AC driver compile error when CONFIG_PM_SLEEP is undefined

* acpi-video:
  Revert "ACPI: Blacklist Win8 OSI for some HP laptop 2013 models"
  ACPI / video: Add systems that should favour native backlight interface
  ACPI / video: Filter the _BCL table for duplicate brightness values

* acpi-cleanup:
  ACPI / SBS: Fix incorrect sscanf() string

* acpi-dock:
  ACPI / dock: Make 'docked' sysfs attribute work as documented

* acpi-pci:
  ACPI / PCI: Fix memory leak in acpi_pci_irq_enable()

* acpi-dsm:
  ACPI / nouveau: fix probing regression related to _DSM

A documentation update exposed the existance of the turbo ratio
register. Update baytrail support to use the turbo range.
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Cc: 3.13+ <stable@vger.kernel.org> # 3.13+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

LFM (max efficiency ratio) is the max frequency at minimum voltage
supported by the processor.  Using LFM as the minimum P state
increases performmance without affecting power. By not using P states
below LFM we avoid using P states that are less power efficient.
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Cc: 3.13+ <stable@vger.kernel.org> # 3.13+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull PCI updates from Bjorn Helgaas:
 "The most interesting thing here is the change to enable INTx (by
  clearing PCI_COMMAND_INTX_DISABLE) if the BIOS left INTx disabled.
  Apparently the Baytrail BIOS does this, which means EHCI doesn't work.

  Also, fix an AHCI MSI regression and other issues with the recent MSI
  changes.  This also adds pci_enable_msi_exact() and
  pci_enable_msix_exact(), which aren't regression fixes, but will keep
  us from touching drivers twice (once to stop using the deprecated
  pci_enable_msi(), etc., and again to use the *_exact() variants).

  There's also a minor MVEBU fix.

  Summary:

  MSI:
    - Fix AHCI single-MSI fallback (Alexander Gordeev)
    - Fix populate_msi_sysfs() error paths (Greg Kroah-Hartman)
    - Fix htmldocs problem (Masanari Iida)
    - Add pci_enable_msi_exact() and pci_enable_msix_exact() (Alexander Gordeev)
    - Update documentation (Alexander Gordeev)

  Miscellaneous:
    - mvebu: expose device ID & revision via lspci (Andrew Lunn)
    - Enable INTx if the BIOS left them disabled (Bjorn Helgaas)"

* tag 'pci-v3.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  ahci: Fix broken fallback to single MSI mode
  PCI: Enable INTx if BIOS left them disabled
  PCI/MSI: Add pci_enable_msi_exact() and pci_enable_msix_exact()
  PCI/MSI: Fix cut-and-paste errors in documentation
  PCI/MSI: Add pci_enable_msi() documentation back
  PCI/MSI: Fix pci_msix_vec_count() htmldocs failure
  PCI/MSI: Fix leak of msi_attrs
  PCI/MSI: Check kmalloc() return value, fix leak of name
  PCI: mvebu: Use Device ID and revision from underlying endpoint

Fix regression caused by commit b072e53b, which breaks loading nouveau
driver on optimus laptops.

On some platforms, ACPI _DSM method (nouveau_op_dsm_muid, function 0)
has special requirements on the fourth parameter, which is different
from ACPI specifications. So revert to the private implementation
to check availability of _DSM functions instead of using common
acpi_check_dsm() interface.

Fixes: b072e53b (ACPI / nouveau: replace open-coded _DSM code with helper functions)
Reported-and-tested-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
[rjw: Subject]
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull libata fixes from Tejun Heo:
 "Various device specific fixes.  Nothing too interesting"

* 'for-3.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci: disable NCQ on Samsung pci-e SSDs on macbooks
  ata: sata_mv: Cleanup only the initialized ports
  sata_sil: apply MOD15WRITE quirk to TOSHIBA MK2561GSYN
  ata: enable quirk from jmicron JMB350 for JMB394
  ATA: SATA_MV: Add missing Kconfig select statememnt
  ata: pata_imx: Check the return value from clk_prepare_enable()

Pull cgroup fixes from Tejun Heo:
 "Quite a few fixes this time.

  Three locking fixes, all marked for -stable.  A couple error path
  fixes and some misc fixes.  Hugh found a bug in memcg offlining
  sequence and we thought we could fix that from cgroup core side but
  that turned out to be insufficient and got reverted.  A different fix
  has been applied to -mm"

* 'for-3.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: update cgroup_enable_task_cg_lists() to grab siglock
  Revert "cgroup: use an ordered workqueue for cgroup destruction"
  cgroup: protect modifications to cgroup_idr with cgroup_mutex
  cgroup: fix locking in cgroup_cfts_commit()
  cgroup: fix error return from cgroup_create()
  cgroup: fix error return value in cgroup_mount()
  cgroup: use an ordered workqueue for cgroup destruction
  nfs: include xattr.h from fs/nfs/nfs3proc.c
  cpuset: update MAINTAINERS entry
  arm, pm, vmpressure: add missing slab.h includes

Pull workqueue fixes from Tejun Heo:
 "Two workqueue fixes.  One for an unlikely but possible critical bug
  during kworker shutdown and the other to make lockdep names a bit more
  descriptive"

* 'for-3.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: ensure @task is valid across kthread_stop()
  workqueue: add args to workqueue lockdep name

Pull DMA-mapping fixes from Marek Szyprowski:
 "This contains fixes for incorrect atomic test in dma-mapping subsystem
  for ARM and x86 architecture"

* 'fixes-for-v3.14' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  x86: dma-mapping: fix GFP_ATOMIC macro usage
  ARM: dma-mapping: fix GFP_ATOMIC macro usage

Signed-off-by: Brian Campbell <brian.campbell@editshare.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sparc_cpu_model isn't in asm/system.h any more, so remove a comment
about it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: sparclinux@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

As the lock might be used through DMA-API which is allowed
in interrupt context.
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Acked-by: Will Deacon <will.deacon@arm.com>

Adds a selftest function for the of_match_node function. of_match_node
is supposed to handle precedence for the compatible property as well as
the name and device_type values. This patch adds some test case data and
a function that makes sure each test node matches against the correct
entry of an of_device_id table.

This code was written to verify the new of_match_node() implementation
that is an earlier part of this series.
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Cc: Kevin Hao <haokexin@gmail.com>

The testcase data is usable by any platform. This patch moves it into
the drivers/of directory so it can be included by any architecture.

Using the test cases requires manually adding #include <testcases.dtsi>
to the end of the boards .dtsi file and enabling CONFIG_OF_SELFTEST. Not
pretty though. A useful project would be to make the testcase code
easier to execute.
Signed-off-by: Grant Likely <grant.likely@linaro.org>

In the current implementation of __of_match_node(), it will compare
each given match entry against all the node's compatible strings
with of_device_is_compatible().

To achieve multiple compatible strings per node with ordering from
specific to generic, this requires given matches to be ordered from
specific to generic. For most of the drivers this is not true and
also an alphabetical ordering is more sane there.

Therefore, we define a following priority order for the match, and
then scan all the entries to find the best match.
  1. specific compatible && type && name
  2. specific compatible && type
  3. specific compatible && name
  4. specific compatible
  5. general compatible && type && name
  6. general compatible && type
  7. general compatible && name
  8. general compatible
  9. type && name
  10. type
  11. name

v5: Fix nested locking bug
v4: Short-circuit failure cases instead of mucking with score, and
    remove extra __of_device_is_compatible() wrapper stub.
    Move scoring logic directly into __of_device_is_compatible()
v3: Also need to bail out when there does have a compatible member in match
    entry, but it doesn't match with the device node's compatible.
v2: Fix the bug such as we get the same score for the following two match
    entries with the empty node 'name2 { };'
	struct of_device_id matches[] = {
		{.name = "name2", },
		{.name = "name2", .type = "type1", },
		{}
	};
Signed-off-by: Kevin Hao <haokexin@gmail.com>
[grant.likely: added v4 changes]
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Tested-by: Stephen Chivers <schivers@csc.com>
Tested-by: Sachin Kamat <sachin.kamat@linaro.org>

The front headphone and mic jackes on a HP desktop model (Vendor Id:
0x111d76c7 Subsystem Id: 0x103c2b17) can not work, the codec on this
machine has 8 physical ports, 6 of them are routed to rear jackes
and all of them work very well, while the remaining 2 ports are
routed to front headphone and mic jackes, but the corresponding
pin complex node are not defined correctly.

After apply this fix, the front audio jackes can work very well.

[trivial fix of enum definition by tiwai]

BugLink: https://bugs.launchpad.net/bugs/1282369
Cc: David Henningsson <david.henningsson@canonical.com>
Tested-by: Gerald Yang <gerald.yang@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-v3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v3.14

A few fixes, all driver speccific ones.  The DaVinci ones aren't as
clear as they should be from the subject lines on the commits but they
fix issues which will prevent correct operation in some use cases and
only affect that particular driver so are reasonably safe.

While copy_to/from_user_page() users are uncommon, there is one in
drivers/staging/lustre/lustre/libcfs/linux/linux-curproc.c which leads
to the following:

ERROR: "sparc32_cachetlb_ops" [drivers/staging/lustre/lustre/libcfs/libcfs.ko] undefined!

during routine allmodconfig build coverage.  The reason this happens
is as follows:

In arch/sparc/include/asm/cacheflush_32.h we have:

 #define flush_cache_page(vma,addr,pfn) \
        sparc32_cachetlb_ops->cache_page(vma, addr)

 #define copy_to_user_page(vma, page, vaddr, dst, src, len) \
        do {                                                    \
                flush_cache_page(vma, vaddr, page_to_pfn(page));\
                memcpy(dst, src, len);                          \
        } while (0)
 #define copy_from_user_page(vma, page, vaddr, dst, src, len) \
        do {                                                    \
                flush_cache_page(vma, vaddr, page_to_pfn(page));\
                memcpy(dst, src, len);                          \
        } while (0)

However, sparc32_cachetlb_ops isn't exported and hence the error.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In arch/sparc/Kernel/Makefile, we see:

   obj-$(CONFIG_SPARC64)   += jump_label.o

However, the Kconfig selects HAVE_ARCH_JUMP_LABEL unconditionally
for all SPARC.  This in turn leads to the following failure when
doing allmodconfig coverage builds:

kernel/built-in.o: In function `__jump_label_update':
jump_label.c:(.text+0x8560c): undefined reference to `arch_jump_label_transform'
kernel/built-in.o: In function `arch_jump_label_transform_static':
(.text+0x85cf4): undefined reference to `arch_jump_label_transform'
make: *** [vmlinux] Error 1

Change HAVE_ARCH_JUMP_LABEL to be conditional on SPARC64 so that it
matches the Makefile.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 2d4054d8 (ACPI: Blacklist Win8 OSI for some HP
laptop 2013 models) that is not necessary any more after previous
commit 1811fcb029fa (ACPI / video: Add systems that should favour native
backlight interface).
Requested-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Some system's ACPI video backlight control interface is broken and the
native backlight control interface should be used by default. This patch
sets the use_native_backlight parameter to true for those systems so
that video backlight control interface will not be created. For detailed
models that are added here, reference the following list.

Note that the user specified kernel cmdline option will always have the
highest priority, i.e. if use_native_backlight=0 is specified and the
system is in the DMI table, the video module will not skip registering
backlight interface for it.

Thinkpad T430s:
Reported-by: Theodore Tso <tytso@mit.edu>
Reported-and-tested-by: Peter Weber <bugs@ttyhoney.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=51231
Thinkpad X230:
Reported-and-tested-by: Igor Gnatenko <i.gnatenko.brain@gmail.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=51231
ThinkPad X1 Carbon:
Reported-and-tested-by: Igor Gnatenko <i.gnatenko.brain@gmail.com>
Lenovo Yoga 13:
Reported-by: Lennart Poettering <lennart@poettering.net>
Reported-and-tested-by: Kevin Smith <thirdwiggin@gmail.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=63811
Dell Inspiron 7520:
Reported-by: Rinat Ibragimov <ibragimovrinat@mail.ru>
Acer Aspire 5733Z:
Reported-by: <sov.info@mail.ru>
References: https://bugzilla.kernel.org/show_bug.cgi?id=62941
Acer Aspire V5-431:
Reported-by: Thomas Christensen <christensenthomas@gmail.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=68751
HP ProBook 4340s:
Reported-and-tested-by: Vladimir Sherenkov <a_12300@mail.ru>
References: http://redmine.russianfedora.pro/issues/1258
HP EliteBook/ProBook 2013 models, ZBook and some others:
Provided-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Some devices have duplicate entries in there brightness levels table, ie
on my Dell Latitude E6430 the table looks like this:

[    3.686060] acpi backlight index   0, val 80
[    3.686095] acpi backlight index   1, val 50
[    3.686122] acpi backlight index   2, val 5
[    3.686147] acpi backlight index   3, val 5
[    3.686172] acpi backlight index   4, val 5
[    3.686197] acpi backlight index   5, val 5
[    3.686223] acpi backlight index   6, val 5
[    3.686248] acpi backlight index   7, val 5
[    3.686273] acpi backlight index   8, val 6
[    3.686332] acpi backlight index   9, val 7
[    3.686356] acpi backlight index  10, val 8
[    3.686380] acpi backlight index  11, val 9
etc.

Notice that brightness values 0-5 are all mapped to 5. This means that
if userspace writes any value between 0 and 5 to the brightness sysfs attribute
and then reads it, it will always return 0, which is somewhat unexpected.

This is a problem for ie gnome-settings-daemon, which uses read-modify-write
logic when the users presses the brightness up or down keys. This is done
this way to take brightness changes from other sources into account.

On this specific laptop what happens once the brightness has been set to 0,
is that gsd reads 0, adds 5, writes 5, and on the next brightness up key press
again reads 0, so things get stuck at the lowest brightness setting.

Filtering out the duplicate table entries, makes any write to brightness
read back as the written value as one would expect, fixing this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Aaron Lu <aaron.lu@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull NFS client bugfixes from Trond Myklebust:
 "Highlights include stable fixes for the following bugs:

   - General performance regression due to NFS_INO_INVALID_LABEL being
     set when the server doesn't support labeled NFS
   - Hang in the RPC code due to a socket out-of-buffer race
   - Infinite loop when trying to establish the NFSv4 lease
   - Use-after-free bug in the RPCSEC gss code.
   - nfs4_select_rw_stateid is returning with a non-zero error value on
     success

  Other bug fixes:

  - Potential memory scribble in the RPC bi-directional RPC code
  - Pipe version reference leak
  - Use the correct net namespace in the new NFSv4 migration code"

* tag 'nfs-for-3.14-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS fix error return in nfs4_select_rw_stateid
  NFSv4: Use the correct net namespace in nfs4_update_server
  SUNRPC: Fix a pipe_version reference leak
  SUNRPC: Ensure that gss_auth isn't freed before its upcall messages
  SUNRPC: Fix potential memory scribble in xprt_free_bc_request()
  SUNRPC: Fix races in xs_nospace()
  SUNRPC: Don't create a gss auth cache unless rpc.gssd is running
  NFS: Do not set NFS_INO_INVALID_LABEL unless server supports labeled NFS

Pull MFD fixes from Lee Jones:
 "Couple of small issues solved:
   - Suspend/Resume call-backs require CONFIG_PM_SLEEP
   - Some drivers written for 32bit architectures fail when compiled
     with a 64bit compiler.  The fixes will future proof the drivers"

* tag 'mfd-fixes-3.14-1' of git://git.linaro.org/people/lee.jones/mfd:
  mfd: sec-core: sec_pmic_{suspend,resume}() should depend on CONFIG_PM_SLEEP
  mfd: max14577: max14577_{suspend,resume}() should depend on CONFIG_PM_SLEEP
  mfd: tps65217: Naturalise cross-architecture discrepancies
  mfd: wm8994-core: Naturalise cross-architecture discrepancies
  mfd: max8998: Naturalise cross-architecture discrepancies
  mfd: max8997: Naturalise cross-architecture discrepancies