- 14 Oct, 2014 40 commits
-
-
Eric Dumazet authored
TCP Small queues tries to keep number of packets in qdisc as small as possible, and depends on a tasklet to feed following packets at TX completion time. Choice of tasklet was driven by latencies requirements. Then, TCP stack tries to avoid reorders, by locking flows with outstanding packets in qdisc in a given TX queue. What can happen is that many flows get attracted by a low performing TX queue, and cpu servicing TX completion has to feed packets for all of them, making this cpu 100% busy in softirq mode. This became particularly visible with latest skb->xmit_more support Strategy adopted in this patch is to detect when tcp_wfree() is called from ksoftirqd and let the outstanding queue for this flow being drained before feeding additional packets, so that skb->ooo_okay can be set to allow select_queue() to select the optimal queue : Incoming ACKS are normally handled by different cpus, so this patch gives more chance for these cpus to take over the burden of feeding qdisc with future packets. Tested: lpaa23:~# ./super_netperf 1400 --google-pacing-rate 3028000 -H lpaa24 -l 3600 & lpaa23:~# sar -n DEV 1 10 | grep eth1 06:16:18 AM eth1 595448.00 1190564.00 38381.09 1760253.12 0.00 0.00 1.00 06:16:19 AM eth1 594858.00 1189686e.00 38340.76 1758952.72 0.00 0.00 0.00 06:16:20 AM eth1 597017.00 1194019.00 38480.79 1765370.29 0.00 0.00 1.00 06:16:21 AM eth1 595450.00 1190936.00 38380.19 1760805.05 0.00 0.00 0.00 06:16:22 AM eth1 596385.00 1193096.00 38442.56 1763976.29 0.00 0.00 1.00 06:16:23 AM eth1 598155.00 1195978.00 38552.97 1768264.60 0.00 0.00 0.00 06:16:24 AM eth1 594405.00 1188643.00 38312.57 1757414.89 0.00 0.00 1.00 06:16:25 AM eth1 593366.00 1187154.00 38252.16 1755195.83 0.00 0.00 0.00 06:16:26 AM eth1 593188.00 1186118.00 38232.88 1753682.57 0.00 0.00 1.00 06:16:27 AM eth1 596301.00 1192241.00 38440.94 1762733.09 0.00 0.00 0.00 Average: eth1 595457.30 1190843.50 38381.69 1760664.84 0.00 0.00 0.50 lpaa23:~# ./tc -s -d qd sh dev eth1 | grep backlog backlog 7606336b 2513p requeues 167982 backlog 224072b 74p requeues 566 backlog 581376b 192p requeues 5598 backlog 181680b 60p requeues 1070 backlog 5305056b 1753p requeues 110166 // Here, this TX queue is attracting flows backlog 157456b 52p requeues 1758 backlog 672216b 222p requeues 3025 backlog 60560b 20p requeues 24541 backlog 448144b 148p requeues 21258 lpaa23:~# echo 1 >/proc/sys/net/ipv4/tcp_tsq_enable_tcp_wfree_ksoftirqd_detect Immediate jump to full bandwidth, and traffic is properly shard on all tx queues. lpaa23:~# sar -n DEV 1 10 | grep eth1 06:16:46 AM eth1 1397632.00 2795397.00 90081.87 4133031.26 0.00 0.00 1.00 06:16:47 AM eth1 1396874.00 2793614.00 90032.99 4130385.46 0.00 0.00 0.00 06:16:48 AM eth1 1395842.00 2791600.00 89966.46 4127409.67 0.00 0.00 1.00 06:16:49 AM eth1 1395528.00 2791017.00 89946.17 4126551.24 0.00 0.00 0.00 06:16:50 AM eth1 1397891.00 2795716.00 90098.74 4133497.39 0.00 0.00 1.00 06:16:51 AM eth1 1394951.00 2789984.00 89908.96 4125022.51 0.00 0.00 0.00 06:16:52 AM eth1 1394608.00 2789190.00 89886.90 4123851.36 0.00 0.00 1.00 06:16:53 AM eth1 1395314.00 2790653.00 89934.33 4125983.09 0.00 0.00 0.00 06:16:54 AM eth1 1396115.00 2792276.00 89984.25 4128411.21 0.00 0.00 1.00 06:16:55 AM eth1 1396829.00 2793523.00 90030.19 4130250.28 0.00 0.00 0.00 Average: eth1 1396158.40 2792297.00 89987.09 4128439.35 0.00 0.00 0.50 lpaa23:~# tc -s -d qd sh dev eth1 | grep backlog backlog 7900052b 2609p requeues 173287 backlog 878120b 290p requeues 589 backlog 1068884b 354p requeues 5621 backlog 996212b 329p requeues 1088 backlog 984100b 325p requeues 115316 backlog 956848b 316p requeues 1781 backlog 1080996b 357p requeues 3047 backlog 975016b 322p requeues 24571 backlog 990156b 327p requeues 21274 (All 8 TX queues get a fair share of the traffic) Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Rajesh Borundia says: ==================== qlcnic: Bug fixes This series fixes following issues. * We were programming maximum number of arguments supported by adapter instead of required in a command. * Destroy tx command requires three arguments instead of two. Please apply these patches to net. ==================== Signed-off-by: -
Rajesh Borundia authored
o Number of arguments taken by destroy tx command is three instead of two. Signed-off-by:
Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by:
-
Rajesh Borundia authored
o Initially we were programming maximum number of arguments. Instead we should program number of arguments required in a command. o Maximum number of arguments for 82xx adapter is four. Fix it for GET_ESWITCH_STATS command. Signed-off-by:
-
Mark Rustad authored
Resolve "logical 'and' applied to non-boolean constant" warnings" that appear in W=2 builds by adding !! to a bit test. Signed-off-by:
Mark Rustad <mark.d.rustad@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
David S. Miller authored
Unlike normal kfree() it is never right to call sock_kfree_s() with a NULL pointer, because sock_kfree_s() also has the side effect of discharging the memory from the sockets quota. Signed-off-by: -
Cong Wang authored
It is okay to free a NULL pointer but not okay to mischarge the socket optmem accounting. Compile test only. Reported-by: rucsoftsec@gmail.com Cc: Chien Yen <chien.yen@oracle.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
Cong Wang <cwang@twopensource.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Hariprasad Shenai authored
Use t4_fw_upgrade instead of t4_load_fw to write firmware into FLASH, since t4_load_fw doesn't co-ordinate with the firmware and the adapter can get hosed enough to require a power cycle of the system. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
David S. Miller authored
Giuseppe Cavallaro says: ==================== stmmac: review and fix the dwmac-sti glue-logic This patch is to review the whole glue logic adopted on STi SoCs that was bugged. In the old glue-logic there was a lot of confusion when setup the retiming especially for STiD127 where, for example, the bits 6 and 7 (in the GMAC control register) have a different meaning of what is used for STiH4xx SoCs. So we cannot adopt the same glue for all these SoCs. Moreover, GiGa on STiD127 didn't work and, for all the SoCs, the RGMII couldn't run when the speed was 10Mbps (because the clock was not properly managed). Note that the phy clock needs to be provided by the platform as well as documented in the related binding file (updated as consequence). The old code supported too many configurations never adopted and validated. This made the code very complex to maintain and debug in case of issues. The patch simplifies all the configurations as commented in the tables inside the file and obviously it has been tested on all the boards based on the SoCs mentioned. With this patch, the dwmac-sti is also ready to support new configurations that will be available on next SoC generations. ==================== Signed-off-by: -
Giuseppe CAVALLARO authored
This patch is to review the whole glue logic adopted on STi SoCs that was bugged. In the old glue-logic there was a lot of confusion when setup the retiming especially for STiD127 where, for example, the bits 6 and 7 (in the GMAC control register) have a different meaning of what is used for STiH4xx SoCs. So we cannot adopt the same glue for all these SoCs. Moreover, GiGa on STiD127 didn't work and, for all the SoCs, the RGMII couldn't run when the speed was 10Mbps (because the clock was not properly managed). Note that the phy clock needs to be provided by the platform as well as documented in the related binding file (updated as consequence). The old code supported too many configurations never adopted and validated. This made the code very complex to maintain and debug in case of issues. The patch simplifies all the configurations as commented in the tables inside the file and obviously it has been tested on all the boards based on the SoCs mentioned. With this patch, the dwmac-sti is also ready to support new configurations that will be available on next SoC generations. Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by:
-
Giuseppe CAVALLARO authored
This adds the missing compatibility to the STiH407 SoC. Signed-off-by:
-
Giuseppe CAVALLARO authored
On several STi platforms: e.g. stihxxx-b2120 an Ethernet switch is embedded and connected to the stmmac via RGMII mode. So this is managed by using the FIXED_PHY. In that case, the support in the platform needs to be fixed to allow the stmmac to dialog with the switch via fixed-link by using phy_bus_name property. Signed-off-by:
-
Guenter Roeck authored
tag_protocol is now an enum, so drivers have to check against it. Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Iyappan Subramanian says: ==================== Adding SGMII based 1GbE basic support to APM X-Gene SoC ethernet driver. v2: Address comments from v1 * Split the patchset into two, the first one being preparatory patch * Added link_state function pointer to the xgene_mac_ops structure * Added xgene_indirect_ctl structure for indirect read/write arguments v1: * Initial version ==================== Signed-off-by: -
Iyappan Subramanian authored
Signed-off-by:
Iyappan Subramanian <isubramanian@apm.com> Signed-off-by:
Keyur Chudgar <kchudgar@apm.com> Signed-off-by:
-
Iyappan Subramanian authored
Signed-off-by:
-
Iyappan Subramanian authored
- Added link_state function pointer to the xgene__mac_ops structure - Moved ring manager (pdata->rm) assignment to xgene_enet_setup_ops - Removed unused variable (pdata->phy_addr) and macro (FULL_DUPLEX) Signed-off-by:
-
Iyappan Subramanian authored
Signed-off-by:
-
Alexei Starovoitov authored
userspace programs that use eBPF instruction macros need to include two files: uapi/linux/filter.h and uapi/linux/bpf.h Move common macro definitions that are shared between classic BPF and eBPF into uapi/linux/bpf_common.h, so that user app can include only one bpf.h file Cc: Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
Fabian Frederick authored
parent cfusbl was used instead of first structure member 'layer' Suggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
Fabian Frederick <fabf@skynet.be> Signed-off-by:
-
Fabian Frederick authored
Let MM subsystem display out of memory messages. Signed-off-by:
-
Fabian Frederick authored
Also add blank line after declaration Signed-off-by:
-
Mugunthan V N authored
remove all the child devices from the system to make sure that re-insert of cpsw module doesn't fail on child device populated by of_platform_populate(). Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by:
-
Mugunthan V N authored
remove spinlock in cpdma_desc_pool_destroy() as there is no active cpdma channel and iounmap should be called without auquiring lock. root@dra7xx-evm:~# modprobe -r ti_cpsw [ 50.539743] [ 50.541312] ====================================================== [ 50.547796] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] [ 50.554826] 3.14.19-02124-g95c5b7b #308 Not tainted [ 50.559939] ------------------------------------------------------ [ 50.566416] modprobe/1921 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 50.573347] (vmap_area_lock){+.+...}, at: [<c01127fc>] find_vmap_area+0x10/0x6c [ 50.581132] [ 50.581132] and this task is already holding: [ 50.587249] (&(&pool->lock)->rlock#2){..-...}, at: [<bf017c74>] cpdma_ctlr_destroy+0x5c/0x114 [davinci_cpdma] [ 50.597766] which would create a new lock dependency: [ 50.603048] (&(&pool->lock)->rlock#2){..-...} -> (vmap_area_lock){+.+...} [ 50.610296] [ 50.610296] but this new dependency connects a SOFTIRQ-irq-safe lock: [ 50.618601] (&(&pool->lock)->rlock#2){..-...} ... which became SOFTIRQ-irq-safe at: [ 50.626829] [<c06585a4>] _raw_spin_lock_irqsave+0x38/0x4c [ 50.632677] [<bf01773c>] cpdma_desc_free.constprop.7+0x28/0x58 [davinci_cpdma] [ 50.640437] [<bf0177e8>] __cpdma_chan_free+0x7c/0xa8 [davinci_cpdma] [ 50.647289] [<bf017908>] __cpdma_chan_process+0xf4/0x134 [davinci_cpdma] [ 50.654512] [<bf017984>] cpdma_chan_process+0x3c/0x54 [davinci_cpdma] [ 50.661455] [<bf0277e8>] cpsw_poll+0x14/0xa8 [ti_cpsw] [ 50.667038] [<c05844f4>] net_rx_action+0xc0/0x1e8 [ 50.672150] [<c0048234>] __do_softirq+0xcc/0x304 [ 50.677183] [<c004873c>] irq_exit+0xa8/0xfc [ 50.681751] [<c000eeac>] handle_IRQ+0x50/0xb0 [ 50.686513] [<c0008638>] gic_handle_irq+0x28/0x5c [ 50.691628] [<c06590a4>] __irq_svc+0x44/0x5c [ 50.696289] [<c0658ab4>] _raw_spin_unlock_irqrestore+0x34/0x44 [ 50.702591] [<c065a9c4>] do_page_fault.part.9+0x144/0x3c4 [ 50.708433] [<c065acb8>] do_page_fault+0x74/0x84 [ 50.713453] [<c00083dc>] do_DataAbort+0x34/0x98 [ 50.718391] [<c065923c>] __dabt_usr+0x3c/0x40 [ 50.723148] [ 50.723148] to a SOFTIRQ-irq-unsafe lock: [ 50.728893] (vmap_area_lock){+.+...} ... which became SOFTIRQ-irq-unsafe at: [ 50.736476] ... [<c06584e8>] _raw_spin_lock+0x28/0x38 [ 50.741876] [<c011376c>] alloc_vmap_area.isra.28+0xb8/0x300 [ 50.747908] [<c0113a44>] __get_vm_area_node.isra.29+0x90/0x134 [ 50.754210] [<c011486c>] get_vm_area_caller+0x3c/0x48 [ 50.759692] [<c0114be0>] vmap+0x40/0x78 [ 50.763900] [<c09442f0>] check_writebuffer_bugs+0x54/0x1a0 [ 50.769835] [<c093eac0>] start_kernel+0x320/0x388 [ 50.774952] [<80008074>] 0x80008074 [ 50.778793] [ 50.778793] other info that might help us debug this: [ 50.778793] [ 50.787181] Possible interrupt unsafe locking scenario: [ 50.787181] [ 50.794295] CPU0 CPU1 [ 50.799042] ---- ---- [ 50.803785] lock(vmap_area_lock); [ 50.807446] local_irq_disable(); [ 50.813652] lock(&(&pool->lock)->rlock#2); [ 50.820782] lock(vmap_area_lock); [ 50.827086] <Interrupt> [ 50.829823] lock(&(&pool->lock)->rlock#2); [ 50.834490] [ 50.834490] *** DEADLOCK *** [ 50.834490] [ 50.840695] 4 locks held by modprobe/1921: [ 50.844981] #0: (&__lockdep_no_validate__){......}, at: [<c03e53e8>] driver_detach+0x44/0xb8 [ 50.854038] #1: (&__lockdep_no_validate__){......}, at: [<c03e53f4>] driver_detach+0x50/0xb8 [ 50.863102] #2: (&(&ctlr->lock)->rlock){......}, at: [<bf017c34>] cpdma_ctlr_destroy+0x1c/0x114 [davinci_cpdma] [ 50.873890] #3: (&(&pool->lock)->rlock#2){..-...}, at: [<bf017c74>] cpdma_ctlr_destroy+0x5c/0x114 [davinci_cpdma] [ 50.884871] the dependencies between SOFTIRQ-irq-safe lock and the holding lock: [ 50.892827] -> (&(&pool->lock)->rlock#2){..-...} ops: 167 { [ 50.898703] IN-SOFTIRQ-W at: [ 50.901995] [<c06585a4>] _raw_spin_lock_irqsave+0x38/0x4c [ 50.909476] [<bf01773c>] cpdma_desc_free.constprop.7+0x28/0x58 [davinci_cpdma] [ 50.918878] [<bf0177e8>] __cpdma_chan_free+0x7c/0xa8 [davinci_cpdma] [ 50.927366] [<bf017908>] __cpdma_chan_process+0xf4/0x134 [davinci_cpdma] [ 50.936218] [<bf017984>] cpdma_chan_process+0x3c/0x54 [davinci_cpdma] [ 50.944794] [<bf0277e8>] cpsw_poll+0x14/0xa8 [ti_cpsw] [ 50.952009] [<c05844f4>] net_rx_action+0xc0/0x1e8 [ 50.958765] [<c0048234>] __do_softirq+0xcc/0x304 [ 50.965432] [<c004873c>] irq_exit+0xa8/0xfc [ 50.971635] [<c000eeac>] handle_IRQ+0x50/0xb0 [ 50.978035] [<c0008638>] gic_handle_irq+0x28/0x5c [ 50.984788] [<c06590a4>] __irq_svc+0x44/0x5c [ 50.991085] [<c0658ab4>] _raw_spin_unlock_irqrestore+0x34/0x44 [ 50.999023] [<c065a9c4>] do_page_fault.part.9+0x144/0x3c4 [ 51.006510] [<c065acb8>] do_page_fault+0x74/0x84 [ 51.013171] [<c00083dc>] do_DataAbort+0x34/0x98 [ 51.019738] [<c065923c>] __dabt_usr+0x3c/0x40 [ 51.026129] INITIAL USE at: [ 51.029335] [<c06585a4>] _raw_spin_lock_irqsave+0x38/0x4c [ 51.036729] [<bf017d78>] cpdma_chan_submit+0x4c/0x2f0 [davinci_cpdma] [ 51.045225] [<bf02863c>] cpsw_ndo_open+0x378/0x6bc [ti_cpsw] [ 51.052897] [<c058747c>] __dev_open+0x9c/0x104 [ 51.059287] [<c05876ec>] __dev_change_flags+0x88/0x160 [ 51.066420] [<c05877e4>] dev_change_flags+0x18/0x48 [ 51.073270] [<c05ed51c>] devinet_ioctl+0x61c/0x6e0 [ 51.080029] [<c056ee54>] sock_ioctl+0x5c/0x298 [ 51.086418] [<c01350a4>] do_vfs_ioctl+0x78/0x61c [ 51.092993] [<c01356ac>] SyS_ioctl+0x64/0x74 [ 51.099200] [<c000e580>] ret_fast_syscall+0x0/0x48 [ 51.105956] } [ 51.107696] ... key at: [<bf019000>] __key.21312+0x0/0xfffff650 [davinci_cpdma] [ 51.115912] ... acquired at: [ 51.119019] [<c00899ac>] lock_acquire+0x9c/0x104 [ 51.124138] [<c06584e8>] _raw_spin_lock+0x28/0x38 [ 51.129341] [<c01127fc>] find_vmap_area+0x10/0x6c [ 51.134547] [<c0114960>] remove_vm_area+0x8/0x6c [ 51.139659] [<c0114a7c>] __vunmap+0x20/0xf8 [ 51.144318] [<c001c350>] __arm_iounmap+0x10/0x18 [ 51.149440] [<bf017d08>] cpdma_ctlr_destroy+0xf0/0x114 [davinci_cpdma] [ 51.156560] [<bf026294>] cpsw_remove+0x48/0x8c [ti_cpsw] [ 51.162407] [<c03e62c8>] platform_drv_remove+0x18/0x1c [ 51.168063] [<c03e4c44>] __device_release_driver+0x70/0xc8 [ 51.174094] [<c03e5458>] driver_detach+0xb4/0xb8 [ 51.179212] [<c03e4a6c>] bus_remove_driver+0x4c/0x90 [ 51.184693] [<c00b024c>] SyS_delete_module+0x10c/0x198 [ 51.190355] [<c000e580>] ret_fast_syscall+0x0/0x48 [ 51.195661] [ 51.197217] the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock: [ 51.205986] -> (vmap_area_lock){+.+...} ops: 520 { [ 51.211032] HARDIRQ-ON-W at: [ 51.214321] [<c06584e8>] _raw_spin_lock+0x28/0x38 [ 51.221090] [<c011376c>] alloc_vmap_area.isra.28+0xb8/0x300 [ 51.228750] [<c0113a44>] __get_vm_area_node.isra.29+0x90/0x134 [ 51.236690] [<c011486c>] get_vm_area_caller+0x3c/0x48 [ 51.243811] [<c0114be0>] vmap+0x40/0x78 [ 51.249654] [<c09442f0>] check_writebuffer_bugs+0x54/0x1a0 [ 51.257239] [<c093eac0>] start_kernel+0x320/0x388 [ 51.263994] [<80008074>] 0x80008074 [ 51.269474] SOFTIRQ-ON-W at: [ 51.272769] [<c06584e8>] _raw_spin_lock+0x28/0x38 [ 51.279525] [<c011376c>] alloc_vmap_area.isra.28+0xb8/0x300 [ 51.287190] [<c0113a44>] __get_vm_area_node.isra.29+0x90/0x134 [ 51.295126] [<c011486c>] get_vm_area_caller+0x3c/0x48 [ 51.302245] [<c0114be0>] vmap+0x40/0x78 [ 51.308094] [<c09442f0>] check_writebuffer_bugs+0x54/0x1a0 [ 51.315669] [<c093eac0>] start_kernel+0x320/0x388 [ 51.322423] [<80008074>] 0x80008074 [ 51.327906] INITIAL USE at: [ 51.331112] [<c06584e8>] _raw_spin_lock+0x28/0x38 [ 51.337775] [<c011376c>] alloc_vmap_area.isra.28+0xb8/0x300 [ 51.345352] [<c0113a44>] __get_vm_area_node.isra.29+0x90/0x134 [ 51.353197] [<c011486c>] get_vm_area_caller+0x3c/0x48 [ 51.360224] [<c0114be0>] vmap+0x40/0x78 [ 51.365977] [<c09442f0>] check_writebuffer_bugs+0x54/0x1a0 [ 51.373464] [<c093eac0>] start_kernel+0x320/0x388 [ 51.380131] [<80008074>] 0x80008074 [ 51.385517] } [ 51.387260] ... key at: [<c0a66948>] vmap_area_lock+0x10/0x20 [ 51.393841] ... acquired at: [ 51.396945] [<c00899ac>] lock_acquire+0x9c/0x104 [ 51.402060] [<c06584e8>] _raw_spin_lock+0x28/0x38 [ 51.407266] [<c01127fc>] find_vmap_area+0x10/0x6c [ 51.412478] [<c0114960>] remove_vm_area+0x8/0x6c [ 51.417592] [<c0114a7c>] __vunmap+0x20/0xf8 [ 51.422252] [<c001c350>] __arm_iounmap+0x10/0x18 [ 51.427369] [<bf017d08>] cpdma_ctlr_destroy+0xf0/0x114 [davinci_cpdma] [ 51.434487] [<bf026294>] cpsw_remove+0x48/0x8c [ti_cpsw] [ 51.440336] [<c03e62c8>] platform_drv_remove+0x18/0x1c [ 51.446000] [<c03e4c44>] __device_release_driver+0x70/0xc8 [ 51.452031] [<c03e5458>] driver_detach+0xb4/0xb8 [ 51.457147] [<c03e4a6c>] bus_remove_driver+0x4c/0x90 [ 51.462628] [<c00b024c>] SyS_delete_module+0x10c/0x198 [ 51.468289] [<c000e580>] ret_fast_syscall+0x0/0x48 [ 51.473584] [ 51.475140] [ 51.475140] stack backtrace: [ 51.479703] CPU: 0 PID: 1921 Comm: modprobe Not tainted 3.14.19-02124-g95c5b7b #308 [ 51.487744] [<c0016090>] (unwind_backtrace) from [<c0012060>] (show_stack+0x10/0x14) [ 51.495865] [<c0012060>] (show_stack) from [<c0652a20>] (dump_stack+0x78/0x94) [ 51.503444] [<c0652a20>] (dump_stack) from [<c0086f18>] (check_usage+0x408/0x594) [ 51.511293] [<c0086f18>] (check_usage) from [<c00870f8>] (check_irq_usage+0x54/0xb0) [ 51.519416] [<c00870f8>] (check_irq_usage) from [<c0088724>] (__lock_acquire+0xe54/0x1b90) [ 51.528077] [<c0088724>] (__lock_acquire) from [<c00899ac>] (lock_acquire+0x9c/0x104) [ 51.536291] [<c00899ac>] (lock_acquire) from [<c06584e8>] (_raw_spin_lock+0x28/0x38) [ 51.544417] [<c06584e8>] (_raw_spin_lock) from [<c01127fc>] (find_vmap_area+0x10/0x6c) [ 51.552726] [<c01127fc>] (find_vmap_area) from [<c0114960>] (remove_vm_area+0x8/0x6c) [ 51.560935] [<c0114960>] (remove_vm_area) from [<c0114a7c>] (__vunmap+0x20/0xf8) [ 51.568693] [<c0114a7c>] (__vunmap) from [<c001c350>] (__arm_iounmap+0x10/0x18) [ 51.576362] [<c001c350>] (__arm_iounmap) from [<bf017d08>] (cpdma_ctlr_destroy+0xf0/0x114 [davinci_cpdma]) [ 51.586494] [<bf017d08>] (cpdma_ctlr_destroy [davinci_cpdma]) from [<bf026294>] (cpsw_remove+0x48/0x8c [ti_cpsw]) [ 51.597261] [<bf026294>] (cpsw_remove [ti_cpsw]) from [<c03e62c8>] (platform_drv_remove+0x18/0x1c) [ 51.606659] [<c03e62c8>] (platform_drv_remove) from [<c03e4c44>] (__device_release_driver+0x70/0xc8) [ 51.616237] [<c03e4c44>] (__device_release_driver) from [<c03e5458>] (driver_detach+0xb4/0xb8) [ 51.625264] [<c03e5458>] (driver_detach) from [<c03e4a6c>] (bus_remove_driver+0x4c/0x90) [ 51.633749] [<c03e4a6c>] (bus_remove_driver) from [<c00b024c>] (SyS_delete_module+0x10c/0x198) [ 51.642781] [<c00b024c>] (SyS_delete_module) from [<c000e580>] (ret_fast_syscall+0x0/0x48) Signed-off-by: -
Mugunthan V N authored
memories allocated with devm_* apis must not be freed with kfree apis, so removing the kfree calls Fixes: e1943128 ('drivers: net: davinci_cpdma: Convert kzalloc() to devm_kzalloc().') Signed-off-by:
-
Prashant Sreedharan authored
Ring TX doorbell only if xmit_more is not set or the queue is stopped. Suggested-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
Prashant Sreedharan <prashant@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Jiri Pirko authored
fib_nh_match does not match nexthops correctly. Example: ip route add 172.16.10/24 nexthop via 192.168.122.12 dev eth0 \ nexthop via 192.168.122.13 dev eth0 ip route del 172.16.10/24 nexthop via 192.168.122.14 dev eth0 \ nexthop via 192.168.122.15 dev eth0 Del command is successful and route is removed. After this patch applied, the route is correctly matched and result is: RTNETLINK answers: No such process Please consider this for stable trees as well. Fixes: 4e902c57 ("[IPv4]: FIB configuration using struct fib_config") Signed-off-by:Jiri Pirko <jiri@resnulli.us> Acked-by:
-
Eric Dumazet authored
We worked hard to improve tcp_ack() performance, by not accessing skb_shinfo() in fast path (cd7d8498 tcp: change tcp_skb_pcount() location) We still have one spurious access because of ACK timestamping, added in commit e1c8a607 ("net-timestamp: ACK timestamp for bytestreams") By checking if sk_tsflags has SOF_TIMESTAMPING_TX_ACK set, we can avoid two cache line misses for the common case. While we are at it, add two prefetchw() : One in tcp_ack() to bring skb at the head of write queue. One in tcp_clean_rtx_queue() loop to bring following skb, as we will delete skb from the write queue and dirty skb->next->prev. Add a couple of [un]likely() clauses. After this patch, tcp_ack() is no longer the most consuming function in tcp stack. Signed-off-by:
-
David S. Miller authored
Tilman Schmidt says: ==================== Coverity patches for drivers/isdn Here's a series of patches for the ISDN CAPI subsystem and the Gigaset ISDN driver. Patches 1 to 7 are specific fixes for Coverity warnings. Patches 8 to 11 fix related problems with the handling of invalid CAPI command codes I noticed while working on this. Patch 12 fixes an unrelated problem I noticed during the subsequent regression tests. It would be great if these could still be merged. ==================== Signed-off-by: -
Tilman Schmidt authored
In usb_gigaset function gigaset_write_cmd(), the length field of the command buffer structure could be cleared by the transmit tasklet before it was used for the function's return value. Fix by copying to a local variable before scheduling the tasklet. Signed-off-by:
Tilman Schmidt <tilman@imap.cc> Signed-off-by:
-
Tilman Schmidt authored
capi_cmd2str() is used in many places to build log messages. None of them is prepared to handle NULL as a result. Change the function to return printable string "INVALID_COMMAND" instead. Signed-off-by:
-
Tilman Schmidt authored
Have callers of capi_cmsg2message and capi_message2cmsg handle non-zero return values indicating failure. Signed-off-by:
-
Tilman Schmidt authored
An invalid CAPI 2.0 command/subcommand combination may retrieve a NULL pointer from the cpars[] array which will later be dereferenced by the parser routines. Fix by adding NULL pointer checks in strategic places. Signed-off-by:
-
Tilman Schmidt authored
Encapsulate accesses to the CAPI 2.0 command/subcommand name and parameter tables in a single place in preparation for redesign. Signed-off-by:
-
Tilman Schmidt authored
The result of the function command_2_index() is used to index two arrays mnames[] and cpars[] with max. index 0x4e but in its current form that function can produce results up to 3*(0x9+0x9)+0x7f = 0xb5. Fix by clamping all result values potentially overrunning the arrays to zero which is already handled as an invalid value. Re-spotted with Coverity. Signed-off-by:
-
Tilman Schmidt authored
Function capi20_manufacturer() is declared with unsigned int cmd argument but called with unsigned long. Fix by correcting the function prototype since the actual argument is part of the user visible API. Spotted with Coverity. Signed-off-by:
-
Tilman Schmidt authored
at_state structures may be allocated individually or as part of a cardstate or bc_state structure. The disconnect() function handled both cases, creating a risk that it might try to deallocate an at_state structure that had not been allocated individually. Fix by splitting disconnect() into two variants handling cases with and without an associated B channel separately, and adding an explicit check. Spotted with Coverity. Signed-off-by:
-
Tilman Schmidt authored
In do_action, a NULL pointer might be passed to function start_dial which will dereference it. Fix by adding a check for NULL before the call. Spotted with Coverity. Signed-off-by:
-
Tilman Schmidt authored
In dump_rawmsg, the length field from a received data package was used unscrutinized, allowing an attacker to control the size of the allocated buffer and the number of times the output loop iterates. Fix by limiting to a reasonable value. Spotted with Coverity. Signed-off-by:
-
Tilman Schmidt authored
In gigaset_isdn_regdev, the name field may not have a null terminator if the source string's length is equal to the buffer size. Fix by zero filling the structure and excluding the last byte of the name field from the copy. Spotted with Coverity. Signed-off-by:
-
