Fixes the following W=1 kernel build warning(s):

 drivers/block/drbd/drbd_receiver.c:265: warning: Function parameter or member 'peer_device' not described in 'drbd_alloc_pages'
 drivers/block/drbd/drbd_receiver.c:265: warning: Excess function parameter 'device' description in 'drbd_alloc_pages'
 drivers/block/drbd/drbd_receiver.c:1362: warning: Function parameter or member 'connection' not described in 'drbd_may_finish_epoch'
 drivers/block/drbd/drbd_receiver.c:1362: warning: Excess function parameter 'device' description in 'drbd_may_finish_epoch'
 drivers/block/drbd/drbd_receiver.c:1451: warning: Function parameter or member 'resource' not described in 'drbd_bump_write_ordering'
 drivers/block/drbd/drbd_receiver.c:1451: warning: Function parameter or member 'bdev' not described in 'drbd_bump_write_ordering'
 drivers/block/drbd/drbd_receiver.c:1451: warning: Excess function parameter 'connection' description in 'drbd_bump_write_ordering'
 drivers/block/drbd/drbd_receiver.c:1643: warning: Function parameter or member 'op' not described in 'drbd_submit_peer_request'
 drivers/block/drbd/drbd_receiver.c:1643: warning: Function parameter or member 'op_flags' not described in 'drbd_submit_peer_request'
 drivers/block/drbd/drbd_receiver.c:1643: warning: Function parameter or member 'fault_type' not described in 'drbd_submit_peer_request'
 drivers/block/drbd/drbd_receiver.c:1643: warning: Excess function parameter 'rw' description in 'drbd_submit_peer_request'
 drivers/block/drbd/drbd_receiver.c:3055: warning: Function parameter or member 'peer_device' not described in 'drbd_asb_recover_0p'
 drivers/block/drbd/drbd_receiver.c:3138: warning: Function parameter or member 'peer_device' not described in 'drbd_asb_recover_1p'
 drivers/block/drbd/drbd_receiver.c:3195: warning: Function parameter or member 'peer_device' not described in 'drbd_asb_recover_2p'
 drivers/block/drbd/drbd_receiver.c:4684: warning: Function parameter or member 'peer_device' not described in 'receive_bitmap_plain'
 drivers/block/drbd/drbd_receiver.c:4684: warning: Function parameter or member 'size' not described in 'receive_bitmap_plain'
 drivers/block/drbd/drbd_receiver.c:4684: warning: Function parameter or member 'p' not described in 'receive_bitmap_plain'
 drivers/block/drbd/drbd_receiver.c:4684: warning: Function parameter or member 'c' not described in 'receive_bitmap_plain'
 drivers/block/drbd/drbd_receiver.c:4738: warning: Function parameter or member 'peer_device' not described in 'recv_bm_rle_bits'
 drivers/block/drbd/drbd_receiver.c:4738: warning: Function parameter or member 'p' not described in 'recv_bm_rle_bits'
 drivers/block/drbd/drbd_receiver.c:4738: warning: Function parameter or member 'c' not described in 'recv_bm_rle_bits'
 drivers/block/drbd/drbd_receiver.c:4738: warning: Function parameter or member 'len' not described in 'recv_bm_rle_bits'
 drivers/block/drbd/drbd_receiver.c:4807: warning: Function parameter or member 'peer_device' not described in 'decode_bitmap_c'
 drivers/block/drbd/drbd_receiver.c:4807: warning: Function parameter or member 'p' not described in 'decode_bitmap_c'
 drivers/block/drbd/drbd_receiver.c:4807: warning: Function parameter or member 'c' not described in 'decode_bitmap_c'
 drivers/block/drbd/drbd_receiver.c:4807: warning: Function parameter or member 'len' not described in 'decode_bitmap_c'

Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: drbd-dev@lists.linbit.com
Cc: linux-block@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210312105530.2219008-6-lee.jones@linaro.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

Fixes the following W=1 kernel build warning(s):

 drivers/block/drbd/drbd_state.c:913: warning: Function parameter or member 'connection' not described in 'is_valid_soft_transition'
 drivers/block/drbd/drbd_state.c:913: warning: Excess function parameter 'device' description in 'is_valid_soft_transition'
 drivers/block/drbd/drbd_state.c:1054: warning: Function parameter or member 'warn' not described in 'sanitize_state'
 drivers/block/drbd/drbd_state.c:1054: warning: Excess function parameter 'warn_sync_abort' description in 'sanitize_state'
 drivers/block/drbd/drbd_state.c:1703: warning: Function parameter or member 'state_change' not described in 'after_state_ch'

Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: drbd-dev@lists.linbit.com
Cc: linux-block@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210312105530.2219008-5-lee.jones@linaro.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

Fixes the following W=1 kernel build warning(s):

 drivers/block/mtip32xx/mtip32xx.c: In function ‘mtip_standby_immediate’:
 drivers/block/mtip32xx/mtip32xx.c:1216:16: warning: variable ‘start’ set but not used [-Wunused-but-set-variable]

Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210312105530.2219008-4-lee.jones@linaro.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

Fixes the following W=1 kernel build warning(s):

 drivers/block/drbd/drbd_interval.c:11: warning: Function parameter or member 'node' not described in 'interval_end'
 drivers/block/drbd/drbd_interval.c:26: warning: Function parameter or member 'root' not described in 'drbd_insert_interval'
 drivers/block/drbd/drbd_interval.c:26: warning: Function parameter or member 'this' not described in 'drbd_insert_interval'
 drivers/block/drbd/drbd_interval.c:70: warning: Function parameter or member 'root' not described in 'drbd_contains_interval'
 drivers/block/drbd/drbd_interval.c:96: warning: Function parameter or member 'root' not described in 'drbd_remove_interval'
 drivers/block/drbd/drbd_interval.c:96: warning: Function parameter or member 'this' not described in 'drbd_remove_interval'
 drivers/block/drbd/drbd_interval.c:113: warning: Function parameter or member 'root' not described in 'drbd_find_overlap'

Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: drbd-dev@lists.linbit.com
Cc: linux-block@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210312105530.2219008-3-lee.jones@linaro.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull NVMe updates from Christoph:

"nvme updates for Linux 5.13

 - fix handling of very large MDTS values (Bart Van Assche)
 - retrigger ANA log update if group descriptor isn't found
   (Hannes Reinecke)
 - fix locking contexts in nvme-tcp and nvmet-tcp (Sagi Grimberg)
 - return proper error code from discovery ctrl (Hou Pu)
 - verify the SGLS field in nvmet-tcp and nvmet-fc (Max Gurtovoy)
 - disallow passthru cmd from targeting a nsid != nsid of the block dev
   (Niklas Cassel)
 - do not allow model_number exceed 40 bytes in nvmet (Noam Gottlieb)
 - enable optional queue idle period tracking in nvmet-tcp
   (Mark Wunderlich)
 - various cleanups and optimizations (Chaitanya Kulkarni, Kanchan Joshi)
 - expose fast_io_fail_tmo in sysfs (Daniel Wagner)
 - implement non-MDTS command limits (Keith Busch)
 - reduce warnings for unhandled command effects (Keith Busch)
 - allocate storage for the SQE as part of the nvme_request (Keith Busch)"

* tag 'nvme-5.13-2021-04-06' of git://git.infradead.org/nvme: (33 commits)
  nvme: fix handling of large MDTS values
  nvme: implement non-mdts command limits
  nvme: disallow passthru cmd from targeting a nsid != nsid of the block dev
  nvme: retrigger ANA log update if group descriptor isn't found
  nvme: export fast_io_fail_tmo to sysfs
  nvme: remove superfluous else in nvme_ctrl_loss_tmo_store
  nvme: use sysfs_emit instead of sprintf
  nvme-fc: check sgl supported by target
  nvme-tcp: check sgl supported by target
  nvmet-tcp: enable optional queue idle period tracking
  nvmet-tcp: fix incorrect locking in state_change sk callback
  nvme-tcp: block BH in sk state_change sk callback
  nvmet: return proper error code from discovery ctrl
  nvme: warn of unhandled effects only once
  nvme: use driver pdu command for passthrough
  nvme-pci: allocate nvme_command within driver pdu
  nvmet: do not allow model_number exceed 40 bytes
  nvmet: remove unnecessary ctrl parameter
  nvmet-fc: update function documentation
  nvme-fc: fix the function documentation comment
  ...

Instead of triggering an integer overflow and undefined behavior if MDTS is
large, set max_hw_sectors to UINT_MAX.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
[hch: rebased to account for the new nvme_mps_to_sectors helper]
Signed-off-by: Christoph Hellwig <hch@lst.de>

Commands that access LBA contents without a data transfer between the
host historically have not had a spec defined upper limit. The driver
set the queue constraints for such commands to the max data transfer
size just to be safe, but this artificial constraint frequently limits
devices below their capabilities.

The NVMe Workgroup ratified TP4040 defines how a controller may
advertise their non-MDTS limits. Use these if provided and default to
the current constraints if not. Since the Dataset Management command
limits are defined in logical blocks, but without a namespace to tell us
the logical block size, the code defaults to the safe 512b size.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

When a passthru command targets a specific namespace, the ns parameter to
nvme_user_cmd()/nvme_user_cmd64() is set. However, there is currently no
validation that the nsid specified in the passthru command targets the
namespace/nsid represented by the block device that the ioctl was
performed on.

Add a check that validates that the nsid in the passthru command matches
that of the supplied namespace.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

If ANA is enabled but no ANA group descriptor is found when creating
a new namespace the ANA log is most likely out of date, so trigger
a re-read. The namespace will be tagged with the NS_ANA_PENDING flag
to exclude it from path selection until the ANA log has been re-read.

Fixes: 32acab31 ("nvme: implement multipath access to nvme subsystems")
Reported-by: Martin George <marting@netapp.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Commit 8c4dfea9 ("nvme-fabrics: reject I/O to offline device")
introduced fast_io_fail_tmo but didn't export the value to sysfs. The
value can be set during the 'nvme connect'. Export the timeout value
to user space via sysfs to allow runtime configuration.

Cc: Victor Gladkov <Victor.Gladkov@kioxia.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Himanshu Madhani <himanshu.madhaani@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

If there is an error we will leave the function early. So there
is no need for an else. Remove it.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>

sysfs_emit is the recommended API to use for formatting strings to be
returned to user space. It is equivalent to scnprintf and aware of the
PAGE_SIZE buffer size.
Suggested-by: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>

SGLs support is mandatory for NVMe/FC, make sure that the target is
aligned to the specification.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

SGLs support is mandatory for NVMe/tcp, make sure that the target is
aligned to the specification.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Add 'idle_poll_period_usecs' option used by io_work() to support
network devices enabled with advanced interrupt moderation
supporting a relaxed interrupt model. It was discovered that
such a NIC used on the target was unable to support initiator
connection establishment, caused by the existing io_work()
flow that immediately exits after a loop with no activity and
does not re-queue itself.

With this new option a queue is assigned a period of time
that no activity must occur in order to become 'idle'.  Until
the queue is idle the work item is requeued.

The new module option is defined as changeable making it
flexible for testing purposes.

The pre-existing legacy behavior is preserved when no module option
for idle_poll_period_usecs is specified.
Signed-off-by: Mark Wunderlich <mark.wunderlich@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

We are not changing anything in the TCP connection state so
we should not take a write_lock but rather a read lock.

This caused a deadlock when running nvmet-tcp and nvme-tcp
on the same system, where state_change callbacks on the
host and on the controller side have causal relationship
and made lockdep report on this with blktests:

================================
WARNING: inconsistent lock state
5.12.0-rc3 #1 Tainted: G          I
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-R} usage.
nvme/1324 [HC0[0]:SC0[0]:HE1:SE1] takes:
ffff888363151000 (clock-AF_INET){++-?}-{2:2}, at: nvme_tcp_state_change+0x21/0x150 [nvme_tcp]
{IN-SOFTIRQ-W} state was registered at:
  __lock_acquire+0x79b/0x18d0
  lock_acquire+0x1ca/0x480
  _raw_write_lock_bh+0x39/0x80
  nvmet_tcp_state_change+0x21/0x170 [nvmet_tcp]
  tcp_fin+0x2a8/0x780
  tcp_data_queue+0xf94/0x1f20
  tcp_rcv_established+0x6ba/0x1f00
  tcp_v4_do_rcv+0x502/0x760
  tcp_v4_rcv+0x257e/0x3430
  ip_protocol_deliver_rcu+0x69/0x6a0
  ip_local_deliver_finish+0x1e2/0x2f0
  ip_local_deliver+0x1a2/0x420
  ip_rcv+0x4fb/0x6b0
  __netif_receive_skb_one_core+0x162/0x1b0
  process_backlog+0x1ff/0x770
  __napi_poll.constprop.0+0xa9/0x5c0
  net_rx_action+0x7b3/0xb30
  __do_softirq+0x1f0/0x940
  do_softirq+0xa1/0xd0
  __local_bh_enable_ip+0xd8/0x100
  ip_finish_output2+0x6b7/0x18a0
  __ip_queue_xmit+0x706/0x1aa0
  __tcp_transmit_skb+0x2068/0x2e20
  tcp_write_xmit+0xc9e/0x2bb0
  __tcp_push_pending_frames+0x92/0x310
  inet_shutdown+0x158/0x300
  __nvme_tcp_stop_queue+0x36/0x270 [nvme_tcp]
  nvme_tcp_stop_queue+0x87/0xb0 [nvme_tcp]
  nvme_tcp_teardown_admin_queue+0x69/0xe0 [nvme_tcp]
  nvme_do_delete_ctrl+0x100/0x10c [nvme_core]
  nvme_sysfs_delete.cold+0x8/0xd [nvme_core]
  kernfs_fop_write_iter+0x2c7/0x460
  new_sync_write+0x36c/0x610
  vfs_write+0x5c0/0x870
  ksys_write+0xf9/0x1d0
  do_syscall_64+0x33/0x40
  entry_SYSCALL_64_after_hwframe+0x44/0xae
irq event stamp: 10687
hardirqs last  enabled at (10687): [<ffffffff9ec376bd>] _raw_spin_unlock_irqrestore+0x2d/0x40
hardirqs last disabled at (10686): [<ffffffff9ec374d8>] _raw_spin_lock_irqsave+0x68/0x90
softirqs last  enabled at (10684): [<ffffffff9f000608>] __do_softirq+0x608/0x940
softirqs last disabled at (10649): [<ffffffff9cdedd31>] do_softirq+0xa1/0xd0

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(clock-AF_INET);
  <Interrupt>
    lock(clock-AF_INET);

 *** DEADLOCK ***

5 locks held by nvme/1324:
 #0: ffff8884a01fe470 (sb_writers#4){.+.+}-{0:0}, at: ksys_write+0xf9/0x1d0
 #1: ffff8886e435c090 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x216/0x460
 #2: ffff888104d90c38 (kn->active#255){++++}-{0:0}, at: kernfs_remove_self+0x22d/0x330
 #3: ffff8884634538d0 (&queue->queue_lock){+.+.}-{3:3}, at: nvme_tcp_stop_queue+0x52/0xb0 [nvme_tcp]
 #4: ffff888363150d30 (sk_lock-AF_INET){+.+.}-{0:0}, at: inet_shutdown+0x59/0x300

stack backtrace:
CPU: 26 PID: 1324 Comm: nvme Tainted: G          I       5.12.0-rc3 #1
Hardware name: Dell Inc. PowerEdge R640/06NR82, BIOS 2.10.0 11/12/2020
Call Trace:
 dump_stack+0x93/0xc2
 mark_lock_irq.cold+0x2c/0xb3
 ? verify_lock_unused+0x390/0x390
 ? stack_trace_consume_entry+0x160/0x160
 ? lock_downgrade+0x100/0x100
 ? save_trace+0x88/0x5e0
 ? _raw_spin_unlock_irqrestore+0x2d/0x40
 mark_lock+0x530/0x1470
 ? mark_lock_irq+0x1d10/0x1d10
 ? enqueue_timer+0x660/0x660
 mark_usage+0x215/0x2a0
 __lock_acquire+0x79b/0x18d0
 ? tcp_schedule_loss_probe.part.0+0x38c/0x520
 lock_acquire+0x1ca/0x480
 ? nvme_tcp_state_change+0x21/0x150 [nvme_tcp]
 ? rcu_read_unlock+0x40/0x40
 ? tcp_mtu_probe+0x1ae0/0x1ae0
 ? kmalloc_reserve+0xa0/0xa0
 ? sysfs_file_ops+0x170/0x170
 _raw_read_lock+0x3d/0xa0
 ? nvme_tcp_state_change+0x21/0x150 [nvme_tcp]
 nvme_tcp_state_change+0x21/0x150 [nvme_tcp]
 ? sysfs_file_ops+0x170/0x170
 inet_shutdown+0x189/0x300
 __nvme_tcp_stop_queue+0x36/0x270 [nvme_tcp]
 nvme_tcp_stop_queue+0x87/0xb0 [nvme_tcp]
 nvme_tcp_teardown_admin_queue+0x69/0xe0 [nvme_tcp]
 nvme_do_delete_ctrl+0x100/0x10c [nvme_core]
 nvme_sysfs_delete.cold+0x8/0xd [nvme_core]
 kernfs_fop_write_iter+0x2c7/0x460
 new_sync_write+0x36c/0x610
 ? new_sync_read+0x600/0x600
 ? lock_acquire+0x1ca/0x480
 ? rcu_read_unlock+0x40/0x40
 ? lock_is_held_type+0x9a/0x110
 vfs_write+0x5c0/0x870
 ksys_write+0xf9/0x1d0
 ? __ia32_sys_read+0xa0/0xa0
 ? lockdep_hardirqs_on_prepare.part.0+0x198/0x340
 ? syscall_enter_from_user_mode+0x27/0x70
 do_syscall_64+0x33/0x40
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: 872d26a3 ("nvmet-tcp: add NVMe over TCP target driver")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The TCP stack can run from process context for a long time
so we should disable BH here.

Fixes: 3f2304f8 ("nvme-tcp: add NVMe over TCP host driver")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Return NVME_SC_INVALID_FIELD from discovery controller like normal
controller when executing identify or get log page command.
Signed-off-by: Hou Pu <houpu.main@gmail.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

We don't need to repeatedly spam the kernel logs with the same warning
about unhandled passthrough IO effects. Just one warning is sufficient
to observe this condition occurs.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

All nvme transport drivers preallocate an nvme command for each request.
Assume to use that command for nvme_setup_cmd() instead of requiring
drivers pass a pointer to it. All nvme drivers must initialize the
generic nvme_request 'cmd' to point to the transport's preallocated
nvme_command.

The generic nvme_request cmd pointer had previously been used only as a
temporary copy for passthrough commands. Since it now points to the
command that gets dispatched, passthrough commands must directly set it
up prior to executing the request.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Except for pci, all the nvme transport drivers allocate a command within
the driver's pdu. Align pci with everyone else by allocating the nvme
command within pci's pdu and replace the .queue_rq() stack variable with
this.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

According to the NVM specifications, the model number size should be
40 bytes (bytes 63:24 of the Identify Controller data structure).
Therefore, any attempt to store a value into model_number which
exceeds 40 bytes should return an error.
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Noam Gottlieb <ngottlieb@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The function nvmet_ctrl_find_get() accepts out pointer to nvmet_ctrl
structure. This function returns the same error value from two places
that is :- NVME_SC_CONNECT_INVALID_PARAM | NVME_SC_DNR.

Move this to the caller so we can change the return type to nvmet_ctrl.

Now that we can changed the return type, instead of taking out pointer
to the nvmet_ctrl structure remove that function parameter and return
the valid nvmet_ctrl pointer on success and NULL on failure.

Also, add and rename the goto labels for more readability with comments.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Add minimum description of the hosthandle parameter for
nvmet_fc_rcv_ls_req() so that we can get rid of the following warning.

drivers/nvme//target/fc.c:2009: warning: Function parameter or member 'hosthandle' not described in 'nvmet_fc_rcv_ls_req
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The nvme_fc_rcv_ls_req() function has first argument as pointer to
remoteport named portprt, but in the documentation comment that is name
is used as remoteport. Fix that to get rid if the compilation warning.

drivers/nvme//host/fc.c:1724: warning: Function parameter or member 'portptr' not described in 'nvme_fc_rcv_ls_req'
drivers/nvme//host/fc.c:1724: warning: Excess function parameter 'remoteport' description in 'nvme_fc_rcv_ls_req'
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Add a new line in functions nvme_pr_preempt(), nvme_pr_clear(), and
nvme_pr_release() after variable declaration which follows the rest of
the code in the nvme/host/core.c.

No functional change(s) in this patch.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme_clear_request() has a check for flag REQ_DONTPREP and it is called
from nvme_init_request() and nvme_setuo_cmd().

The function nvme_init_request() is called from nvme_alloc_request()
and nvme_alloc_request_qid(). From these two callers new request is
allocated everytime. For newly allocated request RQF_DONTPREP is never
set. Since after getting a tag, block layer sets the req->rq_flags == 0
and never sets the REQ_DONTPREP when returning the request :-

nvme_alloc_request()
	blk_mq_alloc_request()
		blk_mq_rq_ctx_init()
			rq->rq_flags = 0 <----

nvme_alloc_request_qid()
	blk_mq_alloc_request_hctx()
		blk_mq_rq_ctx_init()
			rq->rq_flags = 0 <----

The block layer does set req->rq_flags but REQ_DONTPREP is not one of
them and that is set by the driver.

That means we can unconditinally set the REQ_DONTPREP value to the
rq->rq_flags when nvme_init_request()->nvme_clear_request() is called
from above two callers.

Move the check for REQ_DONTPREP from nvme_clear_nvme_request() into
nvme_setup_cmd().

This is needed since nvme_alloc_request() now gets called from fast
path when NVMeOF target is configured with passthru backend to avoid
unnecessary checks in the fast path.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Since nvmet_setup_passthru() function falls in fast path when called
from the NVMeOF passthru backend, make it inline.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The function nvme_init_ctrl_finish() (formerly nvme_init_identify()) has
grown over the period of time about ~200 lines given the size of nvme id
ctrl data structure.

Move the nvme_id_ctrl data structure related initilzation into helper
nvme_init_identify() and call it from nvme_init_ctrl_finish().

When we move the code into nvme_init_identify() change the local
variable i from int to unsigned int and remove the duplicate kfree()
after nvme_mpath_init() and jump to the label out_free if
nvme_mpath_ini() fails.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

This is a prep patch so that we can move the identify data structure
related code initialization from nvme_init_identify() into a helper.

Rename the function nvmet_init_identify() to nvmet_init_ctrl_finish().

Next patch will move the nvme_id_ctrl related initialization from newly
renamed function nvme_init_ctrl_finish() into the nvme_init_identify()
helper.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

For passthrough I/O commands, effects are usually to be zero.
nvme_passthrough_end() does three checks in futility for this case.
Bail out of function-call/checks.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Use the proper macro instead of hard-coded value.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Instead of the using the whitespaces use tab spacing in the
nvmet_execute_identify_ns().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

In nvmet_check_ctrl_status() cmd can be derived from nvmet_req. Remove
the local variable cmd in the nvmet_check_ctrl_status() and function
parameter cmd for nvmet_check_ctrl_status(). Derive the cmd value from
req parameter in the nvmet_check_ctrl_status().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Instead of updating the error log page in the caller of the
nvmet_alloc_ctrt() update the error log page in the nvmet_alloc_ctrl().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

In the function nvmet_alloc_ctrl() we assign status value before we
call nvmet_fine_get_subsys() to:

	status = NVME_SC_CONNECT_INVALID_PARAM | NVME_SC_DNR;

After we successfully find the subsystem we again set the status value
to:

	status = NVME_SC_CONNECT_INVALID_PARAM | NVME_SC_DNR;

Remove the duplicate status assignment value.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Get rid of a local variable that is not needed and just return the
status directly.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The barriers were added to the nvme_irq() in commit 3a7afd8e
("nvme-pci: remove the CQ lock for interrupt driven queues") to prevent
compiler from doing memory optimization for the variabes that were
protected previously by spinlock in nvme_irq() at completion queue
processing and with queue head check condition.

The variable nvmeq->last_cq_head from those checks was removed in the
commit f6c4d97b ("nvme/pci: Remove last_cq_head") that was not
allwing poll queues from mistakenly triggering the spurious interrupt
detection.

Remove the barriers which were protecting the updates to the variables.
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

There's no need to declare a list and then init it manually,
just use the LIST_HEAD() macro.
Signed-off-by: Shixin Liu <liushixin2@huawei.com>
Link: https://lore.kernel.org/r/20210329095349.4170870-2-liushixin2@huawei.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().
Signed-off-by: Shixin Liu <liushixin2@huawei.com>
Link: https://lore.kernel.org/r/20210329095349.4170870-1-liushixin2@huawei.comSigned-off-by: Jens Axboe <axboe@kernel.dk>