Pull btrfs fix from David Sterba:
 "One more fix that I think qualifies for a late merge. It's a revert of
  a one-liner fix that meanwhile got backported to stable kernels and we
  got reports from users.

  The broken fix prevents creating compressed inline extents, which
  could be noticeable on space consumption.

  Technically it's a regression as the patch was merged in 5.14-rc1 but
  got propagated to several stable kernels and has higher exposure than
  a 'typical' development cycle bug"

* tag 'for-5.14-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Revert "btrfs: compression: don't try to compress if we don't have enough pages"

Merge fixes from Andrew Morton:
 "2 patches.

  Subsystems affected by this patch series: mm/memory-hotplug and
  MAINTAINERS"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  MAINTAINERS: exfat: update my email address
  mm/memory_hotplug: fix potential permanent lru cache disable

My email address in exfat entry will be not available in a few days.
Update it to my own kernel.org address.

Link: https://lkml.kernel.org/r/20210825044833.16806-1-namjae.jeon@samsung.comSigned-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If offline_pages failed after lru_cache_disable(), it forgot to do
lru_cache_enable() in error path.  So we would have lru cache disabled
permanently in this case.

Link: https://lkml.kernel.org/r/20210821094246.10149-3-linmiaohe@huawei.com
Fixes: d479960e ("mm: disable LRU pagevec during the migration temporarily")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Chris Goldsworthy <cgoldswo@codeaurora.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It turns out that the SIGIO/FASYNC situation is almost exactly the same
as the EPOLLET case was: user space really wants to be notified after
every operation.

Now, in a perfect world it should be sufficient to only notify user
space on "state transitions" when the IO state changes (ie when a pipe
goes from unreadable to readable, or from unwritable to writable).  User
space should then do as much as possible - fully emptying the buffer or
what not - and we'll notify it again the next time the state changes.

But as with EPOLLET, we have at least one case (stress-ng) where the
kernel sent SIGIO due to the pipe being marked for asynchronous
notification, but the user space signal handler then didn't actually
necessarily read it all before returning (it read more than what was
written, but since there could be multiple writes, it could leave data
pending).

The user space code then expected to get another SIGIO for subsequent
writes - even though the pipe had been readable the whole time - and
would only then read more.

This is arguably a user space bug - and Colin King already fixed the
stress-ng code in question - but the kernel regression rules are clear:
it doesn't matter if kernel people think that user space did something
silly and wrong.  What matters is that it used to work.

So if user space depends on specific historical kernel behavior, it's a
regression when that behavior changes.  It's on us: we were silly to
have that non-optimal historical behavior, and our old kernel behavior
was what user space was tested against.

Because of how the FASYNC notification was tied to wakeup behavior, this
was first broken by commits f467a6a6 and 1b6b26ae ("pipe: fix
and clarify pipe read/write wakeup logic"), but at the time it seems
nobody noticed.  Probably because the stress-ng problem case ends up
being timing-dependent too.

It was then unwittingly fixed by commit 3a34b13a ("pipe: make pipe
writes always wake up readers") only to be broken again when by commit
3b844826 ("pipe: avoid unnecessary EPOLLET wakeups under normal
loads").

And at that point the kernel test robot noticed the performance
refression in the stress-ng.sigio.ops_per_sec case.  So the "Fixes" tag
below is somewhat ad hoc, but it matches when the issue was noticed.

Fix it for good (knock wood) by simply making the kill_fasync() case
separate from the wakeup case.  FASYNC is quite rare, and we clearly
shouldn't even try to use the "avoid unnecessary wakeups" logic for it.

Link: https://lore.kernel.org/lkml/20210824151337.GC27667@xsang-OptiPlex-9020/
Fixes: 3b844826 ("pipe: avoid unnecessary EPOLLET wakeups under normal loads")
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Oliver Sang <oliver.sang@intel.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ucount fixes from Eric Biederman:
 "This branch fixes a regression that made it impossible to increase
  rlimits that had been converted to the ucount infrastructure, and also
  fixes a reference counting bug where the reference was not incremented
  soon enough.

  The fixes are trivial and the bugs have been encountered in the wild,
  and the fixes have been tested"

* 'for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ucounts: Increase ucounts reference counter before the security hook
  ucounts: Fix regression preventing increasing of rlimits in init_user_ns

This reverts commit f2165627.

[BUG]
It's no longer possible to create compressed inline extent after commit
f2165627 ("btrfs: compression: don't try to compress if we don't
have enough pages").

[CAUSE]
For compression code, there are several possible reasons we have a range
that needs to be compressed while it's no more than one page.

- Compressed inline write
  The data is always smaller than one sector and the test lacks the
  condition to properly recognize a non-inline extent.

- Compressed subpage write
  For the incoming subpage compressed write support, we require page
  alignment of the delalloc range.
  And for 64K page size, we can compress just one page into smaller
  sectors.

For those reasons, the requirement for the data to be more than one page
is not correct, and is already causing regression for compressed inline
data writeback.  The idea of skipping one page to avoid wasting CPU time
could be revisited in the future.

[FIX]
Fix it by reverting the offending commit.
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Link: https://lore.kernel.org/linux-btrfs/afa2742.c084f5d6.17b6b08dffc@tnonline.net
Fixes: f2165627 ("btrfs: compression: don't try to compress if we don't have enough pages")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Pull rdma fixes from Jason Gunthorpe:
 "Several small fixes, the first three are significant:

   - mlx5 crash unloading drivers with a rare HW config

   - missing userspace reporting for the new dmabuf objects

   - random rxe failure due to missing memory zeroing

   - static checker/etc reports: missing spin lock init, null pointer
     deref on error, extra unlock on error path, memory allocation under
     spinlock, missing IRQ vector cleanup

   - kconfig typo in the new irdma driver"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/rxe: Zero out index member of struct rxe_queue
  RDMA/efa: Free IRQ vectors on error flow
  RDMA/rxe: Fix memory allocation while in a spin lock
  RDMA/bnxt_re: Remove unpaired rtnl unlock in bnxt_re_dev_init()
  IB/hfi1: Fix possible null-pointer dereference in _extend_sdma_tx_descs()
  RDMA/irdma: Use correct kconfig symbol for AUXILIARY_BUS
  RDMA/bnxt_re: Add missing spin lock initialization
  RDMA/uverbs: Track dmabuf memory regions
  RDMA/mlx5: Fix crash when unbind multiport slave

We need to increment the ucounts reference counter befor security_prepare_creds()
because this function may fail and abort_creds() will try to decrement
this reference.

[   96.465056][ T8641] FAULT_INJECTION: forcing a failure.
[   96.465056][ T8641] name fail_page_alloc, interval 1, probability 0, space 0, times 0
[   96.478453][ T8641] CPU: 1 PID: 8641 Comm: syz-executor668 Not tainted 5.14.0-rc6-syzkaller #0
[   96.487215][ T8641] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
[   96.497254][ T8641] Call Trace:
[   96.500517][ T8641]  dump_stack_lvl+0x1d3/0x29f
[   96.505758][ T8641]  ? show_regs_print_info+0x12/0x12
[   96.510944][ T8641]  ? log_buf_vmcoreinfo_setup+0x498/0x498
[   96.516652][ T8641]  should_fail+0x384/0x4b0
[   96.521141][ T8641]  prepare_alloc_pages+0x1d1/0x5a0
[   96.526236][ T8641]  __alloc_pages+0x14d/0x5f0
[   96.530808][ T8641]  ? __rmqueue_pcplist+0x2030/0x2030
[   96.536073][ T8641]  ? lockdep_hardirqs_on_prepare+0x3e2/0x750
[   96.542056][ T8641]  ? alloc_pages+0x3f3/0x500
[   96.546635][ T8641]  allocate_slab+0xf1/0x540
[   96.551120][ T8641]  ___slab_alloc+0x1cf/0x350
[   96.555689][ T8641]  ? kzalloc+0x1d/0x30
[   96.559740][ T8641]  __kmalloc+0x2e7/0x390
[   96.563980][ T8641]  ? kzalloc+0x1d/0x30
[   96.568029][ T8641]  kzalloc+0x1d/0x30
[   96.571903][ T8641]  security_prepare_creds+0x46/0x220
[   96.577174][ T8641]  prepare_creds+0x411/0x640
[   96.581747][ T8641]  __sys_setfsuid+0xe2/0x3a0
[   96.586333][ T8641]  do_syscall_64+0x3d/0xb0
[   96.590739][ T8641]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   96.596611][ T8641] RIP: 0033:0x445a69
[   96.600483][ T8641] Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 11 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
[   96.620152][ T8641] RSP: 002b:00007f1054173318 EFLAGS: 00000246 ORIG_RAX: 000000000000007a
[   96.628543][ T8641] RAX: ffffffffffffffda RBX: 00000000004ca4c8 RCX: 0000000000445a69
[   96.636600][ T8641] RDX: 0000000000000010 RSI: 00007f10541732f0 RDI: 0000000000000000
[   96.644550][ T8641] RBP: 00000000004ca4c0 R08: 0000000000000001 R09: 0000000000000000
[   96.652500][ T8641] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004ca4cc
[   96.660631][ T8641] R13: 00007fffffe0b62f R14: 00007f1054173400 R15: 0000000000022000

Fixes: 905ae01c ("Add a reference to ucounts for each cred")
Reported-by: syzbot+01985d7909f9468f013c@syzkaller.appspotmail.com
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Link: https://lkml.kernel.org/r/97433b1742c3331f02ad92de5a4f07d673c90613.1629735352.git.legion@kernel.orgSigned-off-by: Eric W. Biederman <ebiederm@xmission.com>

"Ma, XinjianX" <xinjianx.ma@intel.com> reported:

> When lkp team run kernel selftests, we found after these series of patches, testcase mqueue: mq_perf_tests
> in kselftest failed with following message.
>
> # selftests: mqueue: mq_perf_tests
> #
> # Initial system state:
> #       Using queue path:                       /mq_perf_tests
> #       RLIMIT_MSGQUEUE(soft):                  819200
> #       RLIMIT_MSGQUEUE(hard):                  819200
> #       Maximum Message Size:                   8192
> #       Maximum Queue Size:                     10
> #       Nice value:                             0
> #
> # Adjusted system state for testing:
> #       RLIMIT_MSGQUEUE(soft):                  (unlimited)
> #       RLIMIT_MSGQUEUE(hard):                  (unlimited)
> #       Maximum Message Size:                   16777216
> #       Maximum Queue Size:                     65530
> #       Nice value:                             -20
> #       Continuous mode:                        (disabled)
> #       CPUs to pin:                            3
> # ./mq_perf_tests: mq_open() at 296: Too many open files
> not ok 2 selftests: mqueue: mq_perf_tests # exit=1
> ```
>
> Test env:
> rootfs: debian-10
> gcc version: 9

After investigation the problem turned out to be that ucount_max for
the rlimits in init_user_ns was being set to the initial rlimit value.
The practical problem is that ucount_max provides a limit that
applications inside the user namespace can not exceed.  Which means in
practice that rlimits that have been converted to use the ucount
infrastructure were not able to exceend their initial rlimits.

Solve this by setting the relevant values of ucount_max to
RLIM_INIFINITY.  A limit in init_user_ns is pointless so the code
should allow the values to grow as large as possible without riscking
an underflow or an overflow.

As the ltp test case was a bit of a pain I have reproduced the rlimit failure
and tested the fix with the following little C program:
> #include <stdio.h>
> #include <fcntl.h>
> #include <sys/stat.h>
> #include <mqueue.h>
> #include <sys/time.h>
> #include <sys/resource.h>
> #include <errno.h>
> #include <string.h>
> #include <stdlib.h>
> #include <limits.h>
> #include <unistd.h>
>
> int main(int argc, char **argv)
> {
> 	struct mq_attr mq_attr;
> 	struct rlimit rlim;
> 	mqd_t mqd;
> 	int ret;
>
> 	ret = getrlimit(RLIMIT_MSGQUEUE, &rlim);
> 	if (ret != 0) {
> 		fprintf(stderr, "getrlimit(RLIMIT_MSGQUEUE) failed: %s\n", strerror(errno));
> 		exit(EXIT_FAILURE);
> 	}
> 	printf("RLIMIT_MSGQUEUE %lu %lu\n",
> 	       rlim.rlim_cur, rlim.rlim_max);
> 	rlim.rlim_cur = RLIM_INFINITY;
> 	rlim.rlim_max = RLIM_INFINITY;
> 	ret = setrlimit(RLIMIT_MSGQUEUE, &rlim);
> 	if (ret != 0) {
> 		fprintf(stderr, "setrlimit(RLIMIT_MSGQUEUE, RLIM_INFINITY) failed: %s\n", strerror(errno));
> 		exit(EXIT_FAILURE);
> 	}
>
> 	memset(&mq_attr, 0, sizeof(struct mq_attr));
> 	mq_attr.mq_maxmsg = 65536 - 1;
> 	mq_attr.mq_msgsize = 16*1024*1024 - 1;
>
> 	mqd = mq_open("/mq_rlimit_test", O_RDONLY|O_CREAT, 0600, &mq_attr);
> 	if (mqd == (mqd_t)-1) {
> 		fprintf(stderr, "mq_open failed: %s\n", strerror(errno));
> 		exit(EXIT_FAILURE);
> 	}
> 	ret = mq_close(mqd);
> 	if (ret) {
> 		fprintf(stderr, "mq_close failed; %s\n", strerror(errno));
> 		exit(EXIT_FAILURE);
> 	}
>
> 	return EXIT_SUCCESS;
> }

Fixes: 6e52a9f0 ("Reimplement RLIMIT_MSGQUEUE on top of ucounts")
Fixes: d7c9e99a ("Reimplement RLIMIT_MEMLOCK on top of ucounts")
Fixes: d6469690 ("Reimplement RLIMIT_SIGPENDING on top of ucounts")
Fixes: 21d1c5e3 ("Reimplement RLIMIT_NPROC on top of ucounts")
Reported-by: kernel test robot lkp@intel.com
Acked-by: Alexey Gladkov <legion@kernel.org>
Link: https://lkml.kernel.org/r/87eeajswfc.fsf_-_@disp2133Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

This reverts commit 819fbd3d.

It turns out that some user-space applications use these uapi header
files, so even though the only user of the interface is an old driver
that was moved to staging, moving the header files causes unnecessary
pain.

Generally, we really don't want user space to use kernel headers
directly (exactly because it causes pain when we re-organize), and
instead copy them as needed.  But these things happen, and the headers
were in the uapi directory, so I guess it's not entirely unreasonable.

Link: https://lore.kernel.org/lkml/4e3e0d40-df4a-94f8-7c2d-85010b0873c4@web.de/Reported-by: Soeren Moch <smoch@web.de>
Cc: stable@kernel.org  # 5.13
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull powerpc fixes from Michael Ellerman:

 - Fix random crashes on some 32-bit CPUs by adding isync() after
   locking/unlocking KUEP

 - Fix intermittent crashes when loading modules with strict module RWX

 - Fix a section mismatch introduce by a previous fix.

Thanks to Christophe Leroy, Fabiano Rosas, Laurent Vivier, Murilo
Opsfelder Araújo, Nathan Chancellor, and Stan Johnson.

h# -----BEGIN PGP SIGNATURE-----

* tag 'powerpc-5.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm: Fix set_memory_*() against concurrent accesses
  powerpc/32s: Fix random crashes by adding isync() after locking/unlocking KUEP
  powerpc/xive: Do not mark xive_request_ipi() as __init

Pull clk driver fixes from Stephen Boyd:

 - Make the regulator state match the GDSC power domain state at boot on
   Qualcomm SoCs so that the regulator isn't turned off inadvertently.

 - Fix earlycon on i.MX6Q SoCs

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: qcom: gdsc: Ensure regulator init state matches GDSC state
  clk: imx6q: fix uart earlycon unwork

Pull char/misc driver fixes from Greg KH:
 "Here are some small driver fixes for 5.14-rc7.

  They consist of:

   - revert for an interconnect patch that was found to have problems

   - ipack tpci200 driver fixes for reported problems

   - slimbus messaging and ngd fixes for reported problems

  All are small and have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  ipack: tpci200: fix memory leak in the tpci200_register
  ipack: tpci200: fix many double free issues in tpci200_pci_probe
  slimbus: ngd: reset dma setup during runtime pm
  slimbus: ngd: set correct device for pm
  slimbus: messaging: check for valid transaction id
  slimbus: messaging: start transaction ids from 1 instead of zero
  Revert "interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate"

Pull USB fix from Greg KH:
 "Here is a single USB typec tcpm fix for a reported problem for
  5.14-rc7. It showed up in 5.13 and resolves an issue that Hans found.
  It has been in linux-next this week with no reported problems"

* tag 'usb-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: typec: tcpm: Fix VDMs sometimes not being forwarded to alt-mode drivers

Pull RISC-V fixes from Palmer Dabbelt:

 - fix the sifive-l2-cache device tree bindings for json-schema
   compatibility. This does not change the intended behavior of the
   binding.

 - avoid improperly freeing necessary resources during early boot.

* tag 'riscv-for-linus-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Fix a number of free'd resources in init_resources()
  dt-bindings: sifive-l2-cache: Fix 'select' matching

Pull s390 fix from Vasily Gorbik:

 - fix use after free of zpci_dev in pci code

* tag 's390-5.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pci: fix use after free of zpci_dev

Pull mandatory file locking deprecation warning from Jeff Layton:
 "As discussed on the list, this patch just adds a new warning for folks
  who still have mandatory locking enabled and actually mount with '-o
  mand'. I'd like to get this in for v5.14 so we can push this out into
  stable kernels and hopefully reach folks who have mounts with -o mand.

  For now, I'm operating under the assumption that we'll fully remove
  this support in v5.15, but we can move that out if any legitimate
  users of this facility speak up between now and then"

* tag 'locks-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  fs: warn about impending deprecation of mandatory locks

Pull block fixes from Jens Axboe:
 "Three fixes from Ming Lei that should go into 5.14:

   - Fix for a kernel panic when iterating over tags for some cases
     where a flush request is present, a regression in this cycle.

   - Request timeout fix

   - Fix flush request checking"

* tag 'block-5.14-2021-08-20' of git://git.kernel.dk/linux-block:
  blk-mq: fix is_flush_rq
  blk-mq: fix kernel panic during iterating over flush request
  blk-mq: don't grab rq's refcount in blk_mq_check_expired()

Pull io_uring fixes from Jens Axboe:
 "A few small fixes that should go into this release:

   - Fix never re-assigning an initial error value for io_uring_enter()
     for SQPOLL, if asked to do nothing

   - Fix xa_alloc_cycle() return value checking, for cases where we have
     wrapped around

   - Fix for a ctx pin issue introduced in this cycle (Pavel)"

* tag 'io_uring-5.14-2021-08-20' of git://git.kernel.dk/linux-block:
  io_uring: fix xa_alloc_cycle() error return value check
  io_uring: pin ctx on fallback execution
  io_uring: only assign io_uring_enter() SQPOLL error in actual error case

We've had CONFIG_MANDATORY_FILE_LOCKING since 2015 and a lot of distros
have disabled it. Warn the stragglers that still use "-o mand" that
we'll be dropping support for that mount option.

Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>

We currently check for ret != 0 to indicate error, but '1' is a valid
return and just indicates that the allocation succeeded with a wrap.
Correct the check to be for < 0, like it was before the xarray
conversion.

Cc: stable@vger.kernel.org
Fixes: 61cf9370 ("io_uring: Convert personality_idr to XArray")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull ACPI fixes from Rafael Wysocki:
 "These fix two mistakes in new code.

  Specifics:

   - Prevent confusing messages from being printed if the PRMT table is
     not present or there are no PRM modules (Aubrey Li).

   - Fix the handling of suspend-to-idle entry and exit in the case when
     the Microsoft UUID is used with the Low-Power S0 Idle _DSM
     interface (Mario Limonciello)"

* tag 'acpi-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: PM: s2idle: Invert Microsoft UUID entry and exit
  ACPI: PRM: Deal with table not present or no module found

Pull power management fixes from Rafael Wysocki:
 "These fix some issues in the ARM cpufreq drivers and in the operating
  performance points (OPP) framework.

  Specifics:

   - Fix useless WARN() in the OPP core and prevent a noisy warning
     from being printed by OPP _put functions (Dmitry Osipenko).

   - Fix error path when allocation failed in the arm_scmi cpufreq
     driver (Lukasz Luba).

   - Blacklist Qualcomm sc8180x and Qualcomm sm8150 in
     cpufreq-dt-platdev (Bjorn Andersson, Thara Gopinath).

   - Forbid cpufreq for 1.2 GHz variant in the armada-37xx cpufreq
     driver (Marek Behún)"

* tag 'pm-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  opp: Drop empty-table checks from _put functions
  cpufreq: armada-37xx: forbid cpufreq for 1.2 GHz variant
  cpufreq: blocklist Qualcomm sm8150 in cpufreq-dt-platdev
  cpufreq: arm_scmi: Fix error path when allocation failed
  opp: remove WARN when no valid OPPs remain
  cpufreq: blacklist Qualcomm sc8180x in cpufreq-dt-platdev

Merge misc fixes from Andrew Morton:
 "10 patches.

  Subsystems affected by this patch series: MAINTAINERS and mm (shmem,
  pagealloc, tracing, memcg, memory-failure, vmscan, kfence, and
  hugetlb)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  hugetlb: don't pass page cache pages to restore_reserve_on_error
  kfence: fix is_kfence_address() for addresses below KFENCE_POOL_SIZE
  mm: vmscan: fix missing psi annotation for node_reclaim()
  mm/hwpoison: retry with shake_page() for unhandlable pages
  mm: memcontrol: fix occasional OOMs due to proportional memory.low reclaim
  MAINTAINERS: update ClangBuiltLinux IRC chat
  mmflags.h: add missing __GFP_ZEROTAGS and __GFP_SKIP_KASAN_POISON names
  mm/page_alloc: don't corrupt pcppage_migratetype
  Revert "mm: swap: check if swap backing device is congested or not"
  Revert "mm/shmem: fix shmem_swapin() race with swapoff"

Pull drm fixes from Dave Airlie:
 "Regularly scheduled fixes. The ttm one solves a problem of GPU drivers
  failing to load if debugfs is off in Kconfig, otherwise the i915 and
  mediatek, and amdgpu fixes all fairly normal.

  Nouveau has a couple of display fixes, but it has a fix for a
  longstanding race condition in it's memory manager code, and the fix
  mostly removes some code that wasn't working properly and has no
  userspace users. This fix makes the diffstat kinda larger but in a
  good (negative line-count) way.

  core:
   - fix drm_wait_vblank uapi copying bug

  ttm:
   - fix debugfs init when debugfs is off

  amdgpu:
   - vega10 SMU workload fix
   - DCN VM fix
   - DCN 3.01 watermark fix

  amdkfd:
   - SVM fix

  nouveau:
   - ampere display fixes
   - remove MM misfeature to fix a longstanding race condition

  i915:
   - tweaked display workaround for all PCHs
   - eDP MSO pipe sanity for ADL-P fix
   - remove unused symbol export

  mediatek:
   - AAL output size setting
   - Delete component in remove function"

* tag 'drm-fixes-2021-08-20-3' of git://anongit.freedesktop.org/drm/drm:
  drm/amd/display: Use DCN30 watermark calc for DCN301
  drm/i915/dp: remove superfluous EXPORT_SYMBOL()
  drm/i915/edp: fix eDP MSO pipe sanity checks for ADL-P
  drm/i915: Tweaked Wa_14010685332 for all PCHs
  drm/nouveau: rip out nvkm_client.super
  drm/nouveau: block a bunch of classes from userspace
  drm/nouveau/fifo/nv50-: rip out dma channels
  drm/nouveau/kms/nv50: workaround EFI GOP window channel format differences
  drm/nouveau/disp: power down unused DP links during init
  drm/nouveau: recognise GA107
  drm: Copy drm_wait_vblank to user before returning
  drm/amd/display: Ensure DCN save after VM setup
  drm/amdkfd: fix random KFDSVMRangeTest.SetGetAttributesTest test failure
  drm/amd/pm: change the workload type for some cards
  Revert "drm/amd/pm: fix workload mismatch on vega10"
  drm: ttm: Don't bail from ttm_global_init if debugfs_create_dir fails
  drm/mediatek: Add component_del in OVL and COLOR remove function
  drm/mediatek: Add AAL output size configuration

Pull PCI fixes from Bjorn Helgaas:

 - Add Rahul Tanwar as Intel LGM Gateway PCIe maintainer (Rahul Tanwar)

 - Add Jim Quinlan et al as Broadcom STB PCIe maintainers (Jim Quinlan)

 - Increase D3hot-to-D0 delay for AMD Renoir/Cezanne XHCI (Marcin
   Bachry)

 - Correct iomem_get_mapping() usage for legacy_mem sysfs (Krzysztof
   Wilczyński)

* tag 'pci-v5.14-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/sysfs: Use correct variable for the legacy_mem sysfs object
  PCI: Increase D3 delay for AMD Renoir/Cezanne XHCI
  MAINTAINERS: Add Jim Quinlan et al as Broadcom STB PCIe maintainers
  MAINTAINERS: Add Rahul Tanwar as Intel LGM Gateway PCIe maintainer

Pull MMC host fixes from Ulf Hansson:

 - dw_mmc: Fix hang on data CRC error

 - mmci: Fix voltage switch procedure for the stm32 variant

 - sdhci-iproc: Fix some clock issues for BCM2711

 - sdhci-msm: Fixup software timeout value

* tag 'mmc-v5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN on BCM2711
  mmc: sdhci-iproc: Cap min clock frequency on BCM2711
  mmc: sdhci-msm: Update the software timeout value for sdhc
  mmc: mmci: stm32: Check when the voltage switch procedure should be done
  mmc: dw_mmc: Fix hang on data CRC error

Pull more sound fixes from Takashi Iwai:
 "This is a quick follow up for 5.14: a fix for a very recently
  introduced regression on ASoC Intel Atom driver, and another trivial
  HD-audio quirk for HP laptops"

* tag 'sound-5.14-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: intel: atom: Fix breakage for PCM buffer address setup
  ALSA: hda/realtek: Limit mic boost on HP ProBook 445 G8

Pull arm64 fixes from Will Deacon:

 - Fix cleaning of vDSO directories

 - Ensure CNTHCTL_EL2 is fully initialised when booting at EL2

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: initialize all of CNTHCTL_EL2
  arm64: clean vdso & vdso32 files

* acpi-pm:
  ACPI: PM: s2idle: Invert Microsoft UUID entry and exit

Pull iommu fixes from Joerg Roedel:

 - Fix for a potential NULL-ptr dereference in IOMMU core code

 - Two resource leak fixes

 - Cache flush fix in the Intel VT-d driver

* tag 'iommu-fixes-v5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Fix incomplete cache flush in intel_pasid_tear_down_entry()
  iommu/vt-d: Fix PASID reference leak
  iommu: Check if group is NULL before remove device
  iommu/dma: Fix leak in non-contiguous API

* pm-opp:
  opp: Drop empty-table checks from _put functions
  opp: remove WARN when no valid OPPs remain

1) New index member of struct rxe_queue was introduced but not zeroed so
   the initial value of index may be random.

2) The current index is not masked off to index_mask.

In this case producer_addr() and consumer_addr() will get an invalid
address by the random index and then accessing the invalid address
triggers the following panic:

"BUG: unable to handle page fault for address: ffff9ae2c07a1414"

Fix the issue by using kzalloc() to zero out index member.

Fixes: 5bcf5a59 ("RDMA/rxe: Protext kernel index from user space")
Link: https://lore.kernel.org/r/20210820111509.172500-1-yangx.jy@fujitsu.comSigned-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

syzbot hit kernel BUG at fs/hugetlbfs/inode.c:532 as described in [1].
This BUG triggers if the HPageRestoreReserve flag is set on a page in
the page cache.  It should never be set, as the routine
huge_add_to_page_cache explicitly clears the flag after adding a page to
the cache.

The only code other than huge page allocation which sets the flag is
restore_reserve_on_error.  It will potentially set the flag in rare out
of memory conditions.  syzbot was injecting errors to cause memory
allocation errors which exercised this specific path.

The code in restore_reserve_on_error is doing the right thing.  However,
there are instances where pages in the page cache were being passed to
restore_reserve_on_error.  This is incorrect, as once a page goes into
the cache reservation information will not be modified for the page
until it is removed from the cache.  Error paths do not remove pages
from the cache, so even in the case of error, the page will remain in
the cache and no reservation adjustment is needed.

Modify routines that potentially call restore_reserve_on_error with a
page cache page to no longer do so.

Note on fixes tag: Prior to commit 846be085 ("mm/hugetlb: expand
restore_reserve_on_error functionality") the routine would not process
page cache pages because the HPageRestoreReserve flag is not set on such
pages.  Therefore, this issue could not be trigggered.  The code added
by commit 846be085 ("mm/hugetlb: expand restore_reserve_on_error
functionality") is needed and correct.  It exposed incorrect calls to
restore_reserve_on_error which is the root cause addressed by this
commit.

[1] https://lore.kernel.org/linux-mm/00000000000050776d05c9b7c7f0@google.com/

Link: https://lkml.kernel.org/r/20210818213304.37038-1-mike.kravetz@oracle.com
Fixes: 846be085 ("mm/hugetlb: expand restore_reserve_on_error functionality")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: <syzbot+67654e51e54455f1c585@syzkaller.appspotmail.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Originally the addr != NULL check was meant to take care of the case
where __kfence_pool == NULL (KFENCE is disabled).  However, this does
not work for addresses where addr > 0 && addr < KFENCE_POOL_SIZE.

This can be the case on NULL-deref where addr > 0 && addr < PAGE_SIZE or
any other faulting access with addr < KFENCE_POOL_SIZE.  While the
kernel would likely crash, the stack traces and report might be
confusing due to double faults upon KFENCE's attempt to unprotect such
an address.

Fix it by just checking that __kfence_pool != NULL instead.

Link: https://lkml.kernel.org/r/20210818130300.2482437-1-elver@google.com
Fixes: 0ce20dd8 ("mm: add Kernel Electric-Fence infrastructure")
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Acked-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>    [5.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In a debugging session the other day, Rik noticed that node_reclaim()
was missing memstall annotations.  This means we'll miss pressure and
lost productivity resulting from reclaim on an overloaded local NUMA
node when vm.zone_reclaim_mode is enabled.

There haven't been any reports, but that's likely because
vm.zone_reclaim_mode hasn't been a commonly used feature recently, and
the intersection between such setups and psi users is probably nil.

But secondary memory such as CXL-connected DIMMS, persistent memory etc,
and the page demotion patches that handle them
(https://lore.kernel.org/lkml/20210401183216.443C4443@viggo.jf.intel.com/)
could soon make this a more common codepath again.

Link: https://lkml.kernel.org/r/20210818152457.35846-1-hannes@cmpxchg.orgSigned-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

HWPoisonHandlable() sometimes returns false for typical user pages due
to races with average memory events like transfers over LRU lists.  This
causes failures in hwpoison handling.

There's retry code for such a case but does not work because the retry
loop reaches the retry limit too quickly before the page settles down to
handlable state.  Let get_any_page() call shake_page() to fix it.

[naoya.horiguchi@nec.com: get_any_page(): return -EIO when retry limit reached]
  Link: https://lkml.kernel.org/r/20210819001958.2365157-1-naoya.horiguchi@linux.dev

Link: https://lkml.kernel.org/r/20210817053703.2267588-1-naoya.horiguchi@linux.dev
Fixes: 25182f05 ("mm,hwpoison: fix race with hugetlb page allocation")
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reported-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>		[5.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We've noticed occasional OOM killing when memory.low settings are in
effect for cgroups.  This is unexpected and undesirable as memory.low is
supposed to express non-OOMing memory priorities between cgroups.

The reason for this is proportional memory.low reclaim.  When cgroups
are below their memory.low threshold, reclaim passes them over in the
first round, and then retries if it couldn't find pages anywhere else.
But when cgroups are slightly above their memory.low setting, page scan
force is scaled down and diminished in proportion to the overage, to the
point where it can cause reclaim to fail as well - only in that case we
currently don't retry, and instead trigger OOM.

To fix this, hook proportional reclaim into the same retry logic we have
in place for when cgroups are skipped entirely.  This way if reclaim
fails and some cgroups were scanned with diminished pressure, we'll try
another full-force cycle before giving up and OOMing.

[akpm@linux-foundation.org: coding-style fixes]

Link: https://lkml.kernel.org/r/20210817180506.220056-1-hannes@cmpxchg.org
Fixes: 9783aa99 ("mm, memcg: proportional memory.{low,min} reclaim")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Leon Yang <lnyng@fb.com>
Reviewed-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>		[5.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>