1. 23 Feb, 2018 4 commits
  2. 20 Feb, 2018 2 commits
    • Jonathan Corbet's avatar
      Merge branch 'kerneldoc2' into docs-next · fcdf1df2
      Jonathan Corbet authored
      So once upon a time I set out to fix the problem reported by Tobin wherein
      a literal block within a kerneldoc comment would be corrupted in
      processing.  On the way, though, I got annoyed at the way I have to learn
      how kernel-doc works from the beginning every time I tear into it.
      
      As a result, seven of the following eight patches just get rid of some dead
      code and reorganize the rest - mostly turning the 500-line process_file()
      function into something a bit more rational.  Sphinx output is unchanged
      after these are applied.  Then, at the end, there's a tweak to stop messing
      with literal blocks.
      
      If anybody was unaware that I've not done any serious Perl since the
      1990's, they will certainly understand that fact now.
      fcdf1df2
    • Jonathan Corbet's avatar
      docs: Add an SPDX header to kernel-doc · 38476378
      Jonathan Corbet authored
      Add the SPDX header while I'm in the neighborhood.  The source itself just
      says "GNU General Public License", but it also refers people to the COPYING
      file for further information.  Since COPYING says 2.0-only, that is what I
      have put into the header.
      Signed-off-by: default avatarJonathan Corbet <corbet@lwn.net>
      38476378
  3. 19 Feb, 2018 2 commits
  4. 18 Feb, 2018 7 commits
  5. 16 Feb, 2018 1 commit
  6. 15 Feb, 2018 8 commits
  7. 13 Feb, 2018 7 commits
  8. 11 Feb, 2018 9 commits
    • Linus Torvalds's avatar
      Linux 4.16-rc1 · 7928b2cb
      Linus Torvalds authored
      7928b2cb
    • Al Viro's avatar
      unify {de,}mangle_poll(), get rid of kernel-side POLL... · 7a163b21
      Al Viro authored
      except, again, POLLFREE and POLL_BUSY_LOOP.
      
      With this, we finally get to the promised end result:
      
       - POLL{IN,OUT,...} are plain integers and *not* in __poll_t, so any
         stray instances of ->poll() still using those will be caught by
         sparse.
      
       - eventpoll.c and select.c warning-free wrt __poll_t
      
       - no more kernel-side definitions of POLL... - userland ones are
         visible through the entire kernel (and used pretty much only for
         mangle/demangle)
      
       - same behavior as after the first series (i.e. sparc et.al. epoll(2)
         working correctly).
      Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      7a163b21
    • Linus Torvalds's avatar
      vfs: do bulk POLL* -> EPOLL* replacement · a9a08845
      Linus Torvalds authored
      This is the mindless scripted replacement of kernel use of POLL*
      variables as described by Al, done by this script:
      
          for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
              L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
              for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
          done
      
      with de-mangling cleanups yet to come.
      
      NOTE! On almost all architectures, the EPOLL* constants have the same
      values as the POLL* constants do.  But they keyword here is "almost".
      For various bad reasons they aren't the same, and epoll() doesn't
      actually work quite correctly in some cases due to this on Sparc et al.
      
      The next patch from Al will sort out the final differences, and we
      should be all done.
      Scripted-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      a9a08845
    • Linus Torvalds's avatar
      Merge branch 'work.poll2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs · ee5daa13
      Linus Torvalds authored
      Pull more poll annotation updates from Al Viro:
       "This is preparation to solving the problems you've mentioned in the
        original poll series.
      
        After this series, the kernel is ready for running
      
            for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
                  L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
                  for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
            done
      
        as a for bulk search-and-replace.
      
        After that, the kernel is ready to apply the patch to unify
        {de,}mangle_poll(), and then get rid of kernel-side POLL... uses
        entirely, and we should be all done with that stuff.
      
        Basically, that's what you suggested wrt KPOLL..., except that we can
        use EPOLL... instead - they already are arch-independent (and equal to
        what is currently kernel-side POLL...).
      
        After the preparations (in this series) switch to returning EPOLL...
        from ->poll() instances is completely mechanical and kernel-side
        POLL... can go away. The last step (killing kernel-side POLL... and
        unifying {de,}mangle_poll() has to be done after the
        search-and-replace job, since we need userland-side POLL... for
        unified {de,}mangle_poll(), thus the cherry-pick at the last step.
      
        After that we will have:
      
         - POLL{IN,OUT,...} *not* in __poll_t, so any stray instances of
           ->poll() still using those will be caught by sparse.
      
         - eventpoll.c and select.c warning-free wrt __poll_t
      
         - no more kernel-side definitions of POLL... - userland ones are
           visible through the entire kernel (and used pretty much only for
           mangle/demangle)
      
         - same behavior as after the first series (i.e. sparc et.al. epoll(2)
           working correctly)"
      
      * 'work.poll2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
        annotate ep_scan_ready_list()
        ep_send_events_proc(): return result via esed->res
        preparation to switching ->poll() to returning EPOLL...
        add EPOLLNVAL, annotate EPOLL... and event_poll->event
        use linux/poll.h instead of asm/poll.h
        xen: fix poll misannotation
        smc: missing poll annotations
      ee5daa13
    • Linus Torvalds's avatar
      Merge tag 'xtensa-20180211' of git://github.com/jcmvbkbc/linux-xtensa · 3fc928dc
      Linus Torvalds authored
      Pull xtense fix from Max Filippov:
       "Build fix for xtensa architecture with KASAN enabled"
      
      * tag 'xtensa-20180211' of git://github.com/jcmvbkbc/linux-xtensa:
        xtensa: fix build with KASAN
      3fc928dc
    • Linus Torvalds's avatar
      Merge tag 'nios2-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2 · 60d7a21a
      Linus Torvalds authored
      Pull nios2 update from Ley Foon Tan:
      
       - clean up old Kconfig options from defconfig
      
       - remove leading 0x and 0s from bindings notation in dts files
      
      * tag 'nios2-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
        nios2: defconfig: Cleanup from old Kconfig options
        nios2: dts: Remove leading 0x and 0s from bindings notation
      60d7a21a
    • Max Filippov's avatar
      xtensa: fix build with KASAN · f8d0cbf2
      Max Filippov authored
      The commit 917538e2 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT
      usage") removed KASAN_SHADOW_SCALE_SHIFT definition from
      include/linux/kasan.h and added it to architecture-specific headers,
      except for xtensa. This broke the xtensa build with KASAN enabled.
      Define KASAN_SHADOW_SCALE_SHIFT in arch/xtensa/include/asm/kasan.h
      
      Reported by: kbuild test robot <fengguang.wu@intel.com>
      Fixes: 917538e2 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT usage")
      Acked-by: default avatarAndrey Konovalov <andreyknvl@google.com>
      Signed-off-by: default avatarMax Filippov <jcmvbkbc@gmail.com>
      f8d0cbf2
    • Krzysztof Kozlowski's avatar
      nios2: defconfig: Cleanup from old Kconfig options · e0691ebb
      Krzysztof Kozlowski authored
      Remove old, dead Kconfig option INET_LRO. It is gone since
      commit 7bbf3cae ("ipv4: Remove inet_lro library").
      Signed-off-by: default avatarKrzysztof Kozlowski <krzk@kernel.org>
      Acked-by: default avatarLey Foon Tan <ley.foon.tan@intel.com>
      e0691ebb
    • Mathieu Malaterre's avatar
      nios2: dts: Remove leading 0x and 0s from bindings notation · 5d13c731
      Mathieu Malaterre authored
      Improve the DTS files by removing all the leading "0x" and zeros to fix the
      following dtc warnings:
      
      Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
      
      and
      
      Warning (unit_address_format): Node /XXX unit name should not have leading 0s
      
      Converted using the following command:
      
      find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} +
      
      For simplicity, two sed expressions were used to solve each warnings separately.
      
      To make the regex expression more robust a few other issues were resolved,
      namely setting unit-address to lower case, and adding a whitespace before the
      the opening curly brace:
      
      https://elinux.org/Device_Tree_Linux#Linux_conventions
      
      This is a follow up to commit 4c9847b7 ("dt-bindings: Remove leading 0x from bindings notation")
      Reported-by: default avatarDavid Daney <ddaney@caviumnetworks.com>
      Suggested-by: default avatarRob Herring <robh@kernel.org>
      Signed-off-by: default avatarMathieu Malaterre <malat@debian.org>
      Acked-by: default avatarLey Foon Tan <ley.foon.tan@intel.com>
      5d13c731