- 11 Jul, 2016 40 commits
-
-
Jaroslav Kysela authored
[ Upstream commit 0f087ee3 ] See: https://bugzilla.redhat.com/show_bug.cgi?id=1349539 See: https://bugzilla.kernel.org/show_bug.cgi?id=120961Signed-off-by:
Jaroslav Kysela <perex@perex.cz> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com>
-
Hui Wang authored
[ Upstream commit 21e9d017 ] One more Dell laptop with alc293 codec needs ALC293_FIXUP_DELL1_MIC_NO_PRESENCE, but the pin 0x1e does not match the corresponding one in the ALC292_STANDARD_PINS. To use this macro for this machine, we need to remove pin 0x1e from it. BugLink: https://bugs.launchpad.net/bugs/1476888 Cc: <stable@vger.kernel.org> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
Scott Bauer authored
[ Upstream commit 93a2001b ] This patch validates the num_values parameter from userland during the HIDIOCGUSAGES and HIDIOCSUSAGES commands. Previously, if the report id was set to HID_REPORT_ID_UNKNOWN, we would fail to validate the num_values parameter leading to a heap overflow. Cc: stable@vger.kernel.org Signed-off-by:
Scott Bauer <sbauer@plzdonthack.me> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Jerome Marchand authored
[ Upstream commit b8da344b ] In sess_auth_rawntlmssp_authenticate(), the ntlmssp blob is allocated statically and its size is an "empirical" 5*sizeof(struct _AUTHENTICATE_MESSAGE) (320B on x86_64). I don't know where this value comes from or if it was ever appropriate, but it is currently insufficient: the user and domain name in UTF16 could take 1kB by themselves. Because of that, build_ntlmssp_auth_blob() might corrupt memory (out-of-bounds write). The size of ntlmssp_blob in SMB2_sess_setup() is too small too (sizeof(struct _NEGOTIATE_MESSAGE) + 500). This patch allocates the blob dynamically in build_ntlmssp_auth_blob(). Signed-off-by:
Jerome Marchand <jmarchan@redhat.com> Signed-off-by:
Steve French <smfrench@gmail.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
Sinclair Yeh authored
[ Upstream commit 60842ef8 ] The VMWare EFI BIOS will expose port 0x5658 as an ACPI resource. This causes the port to be reserved by the APCI module as the system comes up, making it unavailable to be reserved again by other drivers, thus preserving this VMWare port for special use in a VMWare guest. This port is designed to be shared among multiple VMWare services, such as the VMMOUSE. Because of this, VMMOUSE should not try to reserve this port on its own. The VMWare non-EFI BIOS does not do this to preserve compatibility with existing/legacy VMs. It is known that there is small chance a VM may be configured such that these ports get reserved by other non-VMWare devices, and if this ever happens, the result is undefined. Signed-off-by:
Sinclair Yeh <syeh@vmware.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Cc: <stable@vger.kernel.org> # 4.1- Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Dmitrii Tcvetkov authored
[ Upstream commit 52dfcc5c ] Hello, after this commit: commit f045f459 Author: Ben Skeggs <bskeggs@redhat.com> Date: Thu Jun 2 12:23:31 2016 +1000 drm/nouveau/fbcon: fix out-of-bounds memory accesses kernel started to oops when loading nouveau module when using GTX 780 Ti video adapter. This patch fixes the problem. Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=120591Signed-off-by:
Dmitrii Tcvetkov <demfloro@demfloro.ru> Suggested-by:
Ilia Mirkin <imirkin@alum.mit.edu> Fixes: f045f459 ("nouveau_fbcon_init()") Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Dmitry Torokhov authored
[ Upstream commit 226ba707 ] The touchpad in HP Pavilion 14-ab057ca reports it's version as 12 and according to Elan both 11 and 12 are valid IC types and should be identified as hw_version 4. Reported-by:
Patrick Lessard <Patrick.Lessard@cogeco.com> Tested-by:
-
Ping Cheng authored
[ Upstream commit 12afb344 ] Somehow the patch that added two-finger touch support forgot to update W8001_MAX_LENGTH from 11 to 13. Signed-off-by:
Ping Cheng <pingc@wacom.com> Reviewed-by:
Peter Hutterer <peter.hutterer@who-t.net> Cc: stable@vger.kernel.org Signed-off-by:
-
Andrey Grodzovsky authored
[ Upstream commit 02ef871e ] Current overlap check is evaluating to false a case where a filter field is fully contained (proper subset) of a r/w request. This change applies classical overlap check instead to include all the scenarios. More specifically, for (Hilscher GmbH CIFX 50E-DP(M/S)) device driver the logic is such that the entire confspace is read and written in 4 byte chunks. In this case as an example, CACHE_LINE_SIZE, LATENCY_TIMER and PCI_BIST are arriving together in one call to xen_pcibk_config_write() with offset == 0xc and size == 4. With the exsisting overlap check the LATENCY_TIMER field (offset == 0xd, length == 1) is fully contained in the write request and hence is excluded from write, which is incorrect. Signed-off-by:
Andrey Grodzovsky <andrey2805@gmail.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by:
Jan Beulich <JBeulich@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Oliver Hartkopp authored
[ Upstream commit 25e1ed6e ] For 'real' hardware CAN devices the netlink interface is used to set CAN specific communication parameters. Real CAN hardware can not be created nor removed with the ip tool ... This patch adds a private dellink function for the CAN device driver interface that does just nothing. It's a follow up to commit 993e6f2f ("can: fix oops caused by wrong rtnl newlink usage") but for dellink. Reported-by:
ajneu <ajneu1@gmail.com> Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Cc: <stable@vger.kernel.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Oliver Hartkopp authored
[ Upstream commit bce271f2 ] With upstream commit bb208f14 (can: fix handling of unmodifiable configuration options) a new can_validate() function was introduced. When invoking 'ip link set can0 type can' without any configuration data can_validate() tries to validate the content without taking into account that there's totally no content. This patch adds a check for missing content. Reported-by:
-
Kirill A. Shutemov authored
[ Upstream commit 4ac1c17b ] During page migrations UBIFS might get confused and the following assert triggers: [ 213.480000] UBIFS assert failed in ubifs_set_page_dirty at 1451 (pid 436) [ 213.490000] CPU: 0 PID: 436 Comm: drm-stress-test Not tainted 4.4.4-00176-geaa802524636-dirty #1008 [ 213.490000] Hardware name: Allwinner sun4i/sun5i Families [ 213.490000] [<c0015e70>] (unwind_backtrace) from [<c0012cdc>] (show_stack+0x10/0x14) [ 213.490000] [<c0012cdc>] (show_stack) from [<c02ad834>] (dump_stack+0x8c/0xa0) [ 213.490000] [<c02ad834>] (dump_stack) from [<c0236ee8>] (ubifs_set_page_dirty+0x44/0x50) [ 213.490000] [<c0236ee8>] (ubifs_set_page_dirty) from [<c00fa0bc>] (try_to_unmap_one+0x10c/0x3a8) [ 213.490000] [<c00fa0bc>] (try_to_unmap_one) from [<c00fadb4>] (rmap_walk+0xb4/0x290) [ 213.490000] [<c00fadb4>] (rmap_walk) from [<c00fb1bc>] (try_to_unmap+0x64/0x80) [ 213.490000] [<c00fb1bc>] (try_to_unmap) from [<c010dc28>] (migrate_pages+0x328/0x7a0) [ 213.490000] [<c010dc28>] (migrate_pages) from [<c00d0cb0>] (alloc_contig_range+0x168/0x2f4) [ 213.490000] [<c00d0cb0>] (alloc_contig_range) from [<c010ec00>] (cma_alloc+0x170/0x2c0) [ 213.490000] [<c010ec00>] (cma_alloc) from [<c001a958>] (__alloc_from_contiguous+0x38/0xd8) [ 213.490000] [<c001a958>] (__alloc_from_contiguous) from [<c001ad44>] (__dma_alloc+0x23c/0x274) [ 213.490000] [<c001ad44>] (__dma_alloc) from [<c001ae08>] (arm_dma_alloc+0x54/0x5c) [ 213.490000] [<c001ae08>] (arm_dma_alloc) from [<c035cecc>] (drm_gem_cma_create+0xb8/0xf0) [ 213.490000] [<c035cecc>] (drm_gem_cma_create) from [<c035cf20>] (drm_gem_cma_create_with_handle+0x1c/0xe8) [ 213.490000] [<c035cf20>] (drm_gem_cma_create_with_handle) from [<c035d088>] (drm_gem_cma_dumb_create+0x3c/0x48) [ 213.490000] [<c035d088>] (drm_gem_cma_dumb_create) from [<c0341ed8>] (drm_ioctl+0x12c/0x444) [ 213.490000] [<c0341ed8>] (drm_ioctl) from [<c0121adc>] (do_vfs_ioctl+0x3f4/0x614) [ 213.490000] [<c0121adc>] (do_vfs_ioctl) from [<c0121d30>] (SyS_ioctl+0x34/0x5c) [ 213.490000] [<c0121d30>] (SyS_ioctl) from [<c000f2c0>] (ret_fast_syscall+0x0/0x34) UBIFS is using PagePrivate() which can have different meanings across filesystems. Therefore the generic page migration code cannot handle this case correctly. We have to implement our own migration function which basically does a plain copy but also duplicates the page private flag. UBIFS is not a block device filesystem and cannot use buffer_migrate_page(). Cc: stable@vger.kernel.org Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [rw: Massaged changelog, build fixes, etc...] Signed-off-by:
Richard Weinberger <richard@nod.at> Acked-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Richard Weinberger authored
[ Upstream commit 1118dce7 ] Export these symbols such that UBIFS can implement ->migratepage. Cc: stable@vger.kernel.org Signed-off-by:
-
Richard Weinberger authored
[ Upstream commit 972228d8 ] recover_peb() was never power cut aware, if a power cut happened right after writing the VID header upon next attach UBI would blindly use the new partial written PEB and all data from the old PEB is lost. In order to make recover_peb() power cut aware, write the new VID with a proper crc and copy_flag set such that the UBI attach process will detect whether the new PEB is completely written or not. We cannot directly use ubi_eba_atomic_leb_change() since we'd have to unlock the LEB which is facing a write error. Cc: stable@vger.kernel.org Reported-by:
Jörg Pfähler <pfaehler@isse.de> Reviewed-by:
-
Tony Lindgren authored
[ Upstream commit 0ac3c0a4 ] With many repeated suspend resume cycles, the pin specific wakeirq may not always work on omaps. This is because the write to enable the pin interrupt may not have reached the device over the interconnect before suspend happens. Let's fix the issue with a flush of posted write with a readback. Cc: stable@vger.kernel.org Reported-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Alexander Shiyan authored
[ Upstream commit ba562d5e ] Some PINs do not have a MUX register, it is not an error. It is necessary to allow the continuation of the PINs configuration, otherwise the whole PIN-group will be configured incorrectly. Cc: stable@vger.kernel.org Signed-off-by:
Alexander Shiyan <shc_work@mail.ru> Signed-off-by:
-
Shaokun Zhang authored
[ Upstream commit 20c27a42 ] __sync_icache_dcache unconditionally skips the cache maintenance for anonymous pages, under the assumption that flushing is only required in the presence of D-side aliases [see 7249b79f ("arm64: Do not flush the D-cache for anonymous pages")]. Unfortunately, this breaks migration of anonymous pages holding self-modifying code, where userspace cannot be reasonably expected to reissue maintenance instructions in response to a migration. This patch fixes the problem by removing the broken page_mapping(page) check from the cache syncing code, otherwise we may end up fetching and executing stale instructions from the PoU. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: <stable@vger.kernel.org> Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Boris Brezillon authored
[ Upstream commit 1b7e38b9 ] The driver is only enabling scaling, but never disabling it, thus, if you enable the scaling feature once it stays enabled forever. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Reported-by:
Alex Vazquez <avazquez.dev@gmail.com> Reviewed-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Fixes: 1a396789 ("drm: add Atmel HLCDC Display Controller support") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
[ Upstream commit 70c8217a ] If a task uses a non constant string for the format parameter in trace_printk(), then the trace_printk_fmt variable is set to NULL. This variable is then saved in the __trace_printk_fmt section. The function hold_module_trace_bprintk_format() checks to see if duplicate formats are used by modules, and reuses them if so (saves them to the list if it is new). But this function calls lookup_format() that does a strcmp() to the value (which is now NULL) and can cause a kernel oops. This wasn't an issue till 3debb0a9 ("tracing: Fix trace_printk() to print when not using bprintk()") which added "__used" to the trace_printk_fmt variable, and before that, the kernel simply optimized it out (no NULL value was saved). The fix is simply to handle the NULL pointer in lookup_format() and have the caller ignore the value if it was NULL. Link: http://lkml.kernel.org/r/1464769870-18344-1-git-send-email-zhengjun.xing@intel.comReported-by:
xingzhen <zhengjun.xing@intel.com> Acked-by:
Namhyung Kim <namhyung@kernel.org> Fixes: 3debb0a9 ("tracing: Fix trace_printk() to print when not using bprintk()") Cc: stable@vger.kernel.org # v3.5+ Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Wolfgang Grandegger authored
[ Upstream commit 43200a44 ] At high bus load it could happen that "at91_poll()" enters with all RX message boxes filled up. If then at the end the "quota" is exceeded as well, "rx_next" will not be reset to the first RX mailbox and hence the interrupts remain disabled. Signed-off-by:
Wolfgang Grandegger <wg@grandegger.com> Tested-by:
Amr Bekhit <amrbekhit@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Thor Thayer authored
[ Upstream commit 427460c8 ] When testing CAN write floods on Altera's CycloneV, the first 2 bytes are sometimes 0x00, 0x00 or corrupted instead of the values sent. Also observed bytes 4 & 5 were corrupted in some cases. The D_CAN Data registers are 32 bits and changing from 16 bit writes to 32 bit writes fixes the problem. Testing performed on Altera CycloneV (D_CAN). Requesting tests on other C_CAN & D_CAN platforms. Reported-by:
Richard Andrysek <richard.andrysek@gomtec.de> Signed-off-by:
Thor Thayer <tthayer@opensource.altera.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jason Gunthorpe authored
[ Upstream commit 8c5122e4 ] When this code was reworked for IBoE support the order of assignments for the sl_tclass_flowlabel got flipped around resulting in TClass & FlowLabel being permanently set to 0 in the packet headers. This breaks IB routers that rely on these headers, but only affects kernel users - libmlx4 does this properly for user space. Cc: stable@vger.kernel.org Fixes: fa417f7b ("IB/mlx4: Add support for IBoE") Signed-off-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Jeff Mahoney authored
[ Upstream commit 64c12921 ] The test for !trans->blocks_used in btrfs_abort_transaction is insufficient to determine whether it's safe to drop the transaction handle on the floor. btrfs_cow_block, informed by should_cow_block, can return blocks that have already been CoW'd in the current transaction. trans->blocks_used is only incremented for new block allocations. If an operation overlaps the blocks in the current transaction entirely and must abort the transaction, we'll happily let it clean up the trans handle even though it may have modified the blocks and will commit an incomplete operation. In the long-term, I'd like to do closer tracking of when the fs is actually modified so we can still recover as gracefully as possible, but that approach will need some discussion. In the short term, since this is the only code using trans->blocks_used, let's just switch it to a bool indicating whether any blocks were used and set it when should_cow_block returns false. Cc: stable@vger.kernel.org # 3.4+ Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Reviewed-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Jaroslav Kysela authored
[ Upstream commit 8198868f ] Call path: 1) snd_hdac_power_up_pm() 2) snd_hdac_power_up() 3) pm_runtime_get_sync() 4) __pm_runtime_resume() 5) rpm_resume() The rpm_resume() returns 1 when the device is already active. Because the return value is unmodified, the hdac regmap read/write functions should allow this value for the retry I/O operation, too. Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 3194ed49 ] HD-audio driver uses regmap cache bypass feature for reading a raw value without the cache. But this is racy since both the cached and the uncached reads may occur concurrently. The former is done via the normal control API access while the latter comes from the proc file read. Even though the regmap itself has the protection against the concurrent accesses, the flag set/reset is done without the protection, so it may lead to inconsistent state of bypass flag that doesn't match with the current read and occasionally result in a kernel WARNING like: WARNING: CPU: 3 PID: 2731 at drivers/base/regmap/regcache.c:499 regcache_cache_only+0x78/0x93 One way to work around such a problem is to wrap with a mutex. But in this case, the solution is simpler: for the uncached read, we just skip the regmap and directly calls its accessor. The verb execution there is protected by itself, so basically it's safe to call individually. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116171Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 38327424 ] If __key_link_begin() failed then "edit" would be uninitialized. I've added a check to fix that. This allows a random user to crash the kernel, though it's quite difficult to achieve. There are three ways it can be done as the user would have to cause an error to occur in __key_link(): (1) Cause the kernel to run out of memory. In practice, this is difficult to achieve without ENOMEM cropping up elsewhere and aborting the attempt. (2) Revoke the destination keyring between the keyring ID being looked up and it being tested for revocation. In practice, this is difficult to time correctly because the KEYCTL_REJECT function can only be used from the request-key upcall process. Further, users can only make use of what's in /sbin/request-key.conf, though this does including a rejection debugging test - which means that the destination keyring has to be the caller's session keyring in practice. (3) Have just enough key quota available to create a key, a new session keyring for the upcall and a link in the session keyring, but not then sufficient quota to create a link in the nominated destination keyring so that it fails with EDQUOT. The bug can be triggered using option (3) above using something like the following: echo 80 >/proc/sys/kernel/keys/root_maxbytes keyctl request2 user debug:fred negate @t The above sets the quota to something much lower (80) to make the bug easier to trigger, but this is dependent on the system. Note also that the name of the keyring created contains a random number that may be between 1 and 10 characters in size, so may throw the test off by changing the amount of quota used. Assuming the failure occurs, something like the following will be seen: kfree_debugcheck: out of range ptr 6b6b6b6b6b6b6b68h ------------[ cut here ]------------ kernel BUG at ../mm/slab.c:2821! ... RIP: 0010:[<ffffffff811600f9>] kfree_debugcheck+0x20/0x25 RSP: 0018:ffff8804014a7de8 EFLAGS: 00010092 RAX: 0000000000000034 RBX: 6b6b6b6b6b6b6b68 RCX: 0000000000000000 RDX: 0000000000040001 RSI: 00000000000000f6 RDI: 0000000000000300 RBP: ffff8804014a7df0 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8804014a7e68 R11: 0000000000000054 R12: 0000000000000202 R13: ffffffff81318a66 R14: 0000000000000000 R15: 0000000000000001 ... Call Trace: kfree+0xde/0x1bc assoc_array_cancel_edit+0x1f/0x36 __key_link_end+0x55/0x63 key_reject_and_link+0x124/0x155 keyctl_reject_key+0xb6/0xe0 keyctl_negate_key+0x10/0x12 SyS_keyctl+0x9f/0xe7 do_syscall_64+0x63/0x13a entry_SYSCALL64_slow_path+0x25/0x25 Fixes: f70e2e06 ('KEYS: Do preallocation for __key_link()') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
David Howells <dhowells@redhat.com> cc: stable@vger.kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Tejun Heo authored
[ Upstream commit 8fa3b8d6 ] If percpu_ref initialization fails during css_create(), the free path can end up trying to free css->id of zero. As ID 0 is unused, it doesn't cause a critical breakage but it does trigger a warning message. Fix it by setting css->id to -1 from init_and_link_css(). Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Wenwei Tao <ww.tao0320@gmail.com> Fixes: 01e58659 ("cgroup: release css->id after css_free") Cc: stable@vger.kernel.org # v4.0+ Signed-off-by:
-
Ocquidant, Sebastien authored
[ Upstream commit 8f50b8e5 ] In the omap gpmc driver it can be noticed that GPMC_CONFIG4_OEEXTRADELAY is overwritten by the WEEXTRADELAY value from the device tree and GPMC_CONFIG4_WEEXTRADELAY is not updated by the value from the device tree. As a consequence, the memory accesses cannot be configured properly when the extra delay are needed for OE and WE. Fix the update of GPMC_CONFIG4_WEEXTRADELAY with the value from the device tree file and prevents GPMC_CONFIG4_OEXTRADELAY being overwritten by the WEXTRADELAY value from the device tree. Cc: stable@vger.kernel.org Signed-off-by:
Ocquidant, Sebastien <sebastienocquidant@eaton.com> Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Xiubo Li authored
[ Upstream commit caf1ff26 ] These days, we experienced one guest crash with 8 cores and 3 disks, with qemu error logs as bellow: qemu-system-x86_64: /build/qemu-2.0.0/kvm-all.c:984: kvm_irqchip_commit_routes: Assertion `ret == 0' failed. And then we found one patch(bdf026317d) in qemu tree, which said could fix this bug. Execute the following script will reproduce the BUG quickly: irq_affinity.sh ======================================================================== vda_irq_num=25 vdb_irq_num=27 while [ 1 ] do for irq in {1,2,4,8,10,20,40,80} do echo $irq > /proc/irq/$vda_irq_num/smp_affinity echo $irq > /proc/irq/$vdb_irq_num/smp_affinity dd if=/dev/vda of=/dev/zero bs=4K count=100 iflag=direct dd if=/dev/vdb of=/dev/zero bs=4K count=100 iflag=direct done done ======================================================================== The following qemu log is added in the qemu code and is displayed when this bug reproduced: kvm_irqchip_commit_routes: max gsi: 1008, nr_allocated_irq_routes: 1024, irq_routes->nr: 1024, gsi_count: 1024. That's to say when irq_routes->nr == 1024, there are 1024 routing entries, but in the kernel code when routes->nr >= 1024, will just return -EINVAL; The nr is the number of the routing entries which is in of [1 ~ KVM_MAX_IRQ_ROUTES], not the index in [0 ~ KVM_MAX_IRQ_ROUTES - 1]. This patch fix the BUG above. Cc: stable@vger.kernel.org Signed-off-by:
Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by:
Wei Tang <tangwei@cmss.chinamobile.com> Signed-off-by:
Zhang Zhuoyu <zhangzhuoyu@cmss.chinamobile.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Jiri Slaby authored
[ Upstream commit 7e1b1fc4 ] Modules which register drivers via standard path (driver_register) in parallel can cause a warning: WARNING: CPU: 2 PID: 3492 at ../fs/sysfs/dir.c:31 sysfs_warn_dup+0x62/0x80 sysfs: cannot create duplicate filename '/module/saa7146/drivers' Modules linked in: hexium_gemini(+) mxb(+) ... ... Call Trace: ... [<ffffffff812e63a2>] sysfs_warn_dup+0x62/0x80 [<ffffffff812e6487>] sysfs_create_dir_ns+0x77/0x90 [<ffffffff8140f2c4>] kobject_add_internal+0xb4/0x340 [<ffffffff8140f5b8>] kobject_add+0x68/0xb0 [<ffffffff8140f631>] kobject_create_and_add+0x31/0x70 [<ffffffff8157a703>] module_add_driver+0xc3/0xd0 [<ffffffff8155e5d4>] bus_add_driver+0x154/0x280 [<ffffffff815604c0>] driver_register+0x60/0xe0 [<ffffffff8145bed0>] __pci_register_driver+0x60/0x70 [<ffffffffa0273e14>] saa7146_register_extension+0x64/0x90 [saa7146] [<ffffffffa0033011>] hexium_init_module+0x11/0x1000 [hexium_gemini] ... As can be (mostly) seen, driver_register causes this call sequence: -> bus_add_driver -> module_add_driver -> module_create_drivers_dir The last one creates "drivers" directory in /sys/module/<...>. When this is done in parallel, the directory is attempted to be created twice at the same time. This can be easily reproduced by loading mxb and hexium_gemini in parallel: while :; do modprobe mxb & modprobe hexium_gemini wait rmmod mxb hexium_gemini saa7146_vv saa7146 done saa7146 calls pci_register_driver for both mxb and hexium_gemini, which means /sys/module/saa7146/drivers is to be created for both of them. Fix this by a new mutex in module_create_drivers_dir which makes the test-and-create "drivers" dir atomic. I inverted the condition and removed 'return' to avoid multiple unlocks or a goto. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Fixes: fe480a26 (Modules: only add drivers/ direcory if needed) Cc: v2.6.21+ <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
J. Bruce Fields authored
[ Upstream commit d50039ea ] Also simplify the logic a bit. Cc: stable@vger.kernel.org Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Acked-by:
Trond Myklebust <trondmy@primarydata.com> Signed-off-by:
-
Andrey Grodzovsky authored
[ Upstream commit fd2d2bac ] Not clearing mst manager's proposed vcpis table for destroyed connectors when the manager is stopped leaves it pointing to unrefernced memory, this causes pagefault when the manager is restarted when plugging back a branch. Fixes: 91a25e46 ("drm/dp/mst: deallocate payload on port destruction") Signed-off-by:
Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Reviewed-by:
Lyude <cpaul@redhat.com> Cc: stable@vger.kernel.org Cc: Mykola Lysenko <Mykola.Lysenko@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Lyude authored
[ Upstream commit 476490a9 ] Thanks to Ville Syrjälä for pointing me towards the cause of this issue. Unfortunately one of the sideaffects of having the refclk for a DPLL set to SSC is that as long as it's set to SSC, the GPU will prevent us from powering down any of the pipes or transcoders using it. A couple of BIOSes enable SSC in both PCH_DREF_CONTROL and in the DPLL configurations. This causes issues on the first modeset, since we don't expect SSC to be left on and as a result, can't successfully power down the pipes or the transcoders using it. Here's an example from this Dell OptiPlex 990: [drm:intel_modeset_init] SSC enabled by BIOS, overriding VBT which says disabled [drm:intel_modeset_init] 2 display pipes available. [drm:intel_update_cdclk] Current CD clock rate: 400000 kHz [drm:intel_update_max_cdclk] Max CD clock rate: 400000 kHz [drm:intel_update_max_cdclk] Max dotclock rate: 360000 kHz vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [drm:intel_crt_reset] crt adpa set to 0xf40000 [drm:intel_dp_init_connector] Adding DP connector on port C [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-1 [drm:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_ck505 0 [drm:ironlake_init_pch_refclk] Disabling SSC entirely … later we try committing the first modeset … [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88041b02e800 for pipe A [drm:intel_dump_pipe_config] cpu_transcoder: A … [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xc4016001, dpll_md: 0x0, fp0: 0x20e08, fp1: 0x30d07 [drm:intel_dump_pipe_config] planes on this crtc [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [drm:intel_dump_pipe_config] FB:42, fb = 800x600 format = 0x34325258 [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 800x600 dst (0, 0) 800x600 [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0 [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [drm:intel_get_shared_dpll] CRTC:26 allocated PCH DPLL A [drm:intel_get_shared_dpll] using PCH DPLL A for pipe A [drm:ilk_audio_codec_disable] Disable audio codec on port C, pipe A [drm:intel_disable_pipe] disabling pipe A ------------[ cut here ]------------ WARNING: CPU: 1 PID: 130 at drivers/gpu/drm/i915/intel_display.c:1146 intel_disable_pipe+0x297/0x2d0 [i915] pipe_off wait timed out … ---[ end trace 94fc8aa03ae139e8 ]--- [drm:intel_dp_link_down] [drm:ironlake_crtc_disable [i915]] *ERROR* failed to disable transcoder A Later modesets succeed since they reset the DPLL's configuration anyway, but this is enough to get stuck with a big fat warning in dmesg. A better solution would be to add refcounts for the SSC source, but for now leaving the source clock on should suffice. Changes since v4: - Fix calculation of final for systems with LVDS panels (fixes BUG() on CI test suite) Changes since v3: - Move temp variable into loop - Move checks for using_ssc_source to after we've figured out has_ck505 - Add using_ssc_source to debug output Changes since v2: - Fix debug output for when we disable the CPU source Changes since v1: - Leave the SSC source clock on instead of just shutting it off on all of the DPLL configurations. Cc: stable@vger.kernel.org Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1465916649-10228-1-git-send-email-cpaul@redhat.comSigned-off-by:
-
Rhyland Klein authored
[ Upstream commit 5bc28b93 ] Change power_supply_read_temp() to use power_supply_get_property() so that it will check the use_cnt and ensure it is > 0. The use_cnt will be incremented at the end of __power_supply_register, so this will block to case where get_property can be called before the supply is fully registered. This fixes the issue show in the stack below: [ 1.452598] power_supply_read_temp+0x78/0x80 [ 1.458680] thermal_zone_get_temp+0x5c/0x11c [ 1.464765] thermal_zone_device_update+0x34/0xb4 [ 1.471195] thermal_zone_device_register+0x87c/0x8cc [ 1.477974] __power_supply_register+0x364/0x424 [ 1.484317] power_supply_register_no_ws+0x10/0x18 [ 1.490833] bq27xxx_battery_setup+0x10c/0x164 [ 1.497003] bq27xxx_battery_i2c_probe+0xd0/0x1b0 [ 1.503435] i2c_device_probe+0x174/0x240 [ 1.509172] driver_probe_device+0x1fc/0x29c [ 1.515167] __driver_attach+0xa4/0xa8 [ 1.520643] bus_for_each_dev+0x58/0x98 [ 1.526204] driver_attach+0x20/0x28 [ 1.531505] bus_add_driver+0x1c8/0x22c [ 1.537067] driver_register+0x68/0x108 [ 1.542630] i2c_register_driver+0x38/0x7c [ 1.548457] bq27xxx_battery_i2c_driver_init+0x18/0x20 [ 1.555321] do_one_initcall+0x38/0x12c [ 1.560886] kernel_init_freeable+0x148/0x1ec [ 1.566972] kernel_init+0x10/0xfc [ 1.572101] ret_from_fork+0x10/0x40 Also make the same change to ps_get_max_charge_cntl_limit() and ps_get_cur_chrage_cntl_limit() to be safe. Lastly, change the return value of power_supply_get_property() to -EAGAIN from -ENODEV if use_cnt <= 0. Fixes: 297d716f ("power_supply: Change ownership from driver to core") Cc: stable@vger.kernel.org Signed-off-by:
Rhyland Klein <rklein@nvidia.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Andrey Ryabinin authored
[ Upstream commit 57675cb9 ] Lengthy output of sysrq-w may take a lot of time on slow serial console. Currently we reset NMI-watchdog on the current CPU to avoid spurious lockup messages. Sometimes this doesn't work since softlockup watchdog might trigger on another CPU which is waiting for an IPI to proceed. We reset softlockup watchdogs on all CPUs, but we do this only after listing all tasks, and this may be too late on a busy system. So, reset watchdogs CPUs earlier, in for_each_process_thread() loop. Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/1465474805-14641-1-git-send-email-aryabinin@virtuozzo.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Masami Hiramatsu authored
[ Upstream commit dcfc4724 ] Fix kprobe_fault_handler() to clear the TF (trap flag) bit of the flags register in the case of a fault fixup on single-stepping. If we put a kprobe on the instruction which caused a page fault (e.g. actual mov instructions in copy_user_*), that fault happens on the single-stepping buffer. In this case, kprobes resets running instance so that the CPU can retry execution on the original ip address. However, current code forgets to reset the TF bit. Since this fault happens with TF bit set for enabling single-stepping, when it retries, it causes a debug exception and kprobes can not handle it because it already reset itself. On the most of x86-64 platform, it can be easily reproduced by using kprobe tracer. E.g. # cd /sys/kernel/debug/tracing # echo p copy_user_enhanced_fast_string+5 > kprobe_events # echo 1 > events/kprobes/enable And you'll see a kernel panic on do_debug(), since the debug trap is not handled by kprobes. To fix this problem, we just need to clear the TF bit when resetting running kprobe. Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by:
Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Acked-by:
-
Michal Suchanek authored
[ Upstream commit 719bd654 ] The trasfer timeout is fixed at 1000 ms. Reading a 4Mbyte flash over 1MHz SPI bus takes way longer than that. Calculate the timeout from the actual time the transfer is supposed to take and multiply by 2 for good measure. Signed-off-by:
Michal Suchanek <hramrach@gmail.com> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Michal Suchanek authored
[ Upstream commit 6d9fe44b ] When testing SPI without DMA I noticed that filling the FIFO on the spi controller causes timeout. Always leave room for one byte in the FIFO. Signed-off-by:
-
James Hogan authored
[ Upstream commit 797179bc ] Copy __kvm_mips_vcpu_run() into unmapped memory, so that we can never get a TLB refill exception in it when KVM is built as a module. This was observed to happen with the host MIPS kernel running under QEMU, due to a not entirely transparent optimisation in the QEMU TLB handling where TLB entries replaced with TLBWR are copied to a separate part of the TLB array. Code in those pages continue to be executable, but those mappings persist only until the next ASID switch, even if they are marked global. An ASID switch happens in __kvm_mips_vcpu_run() at exception level after switching to the guest exception base. Subsequent TLB mapped kernel instructions just prior to switching to the guest trigger a TLB refill exception, which enters the guest exception handlers without updating EPC. This appears as a guest triggered TLB refill on a host kernel mapped (host KSeg2) address, which is not handled correctly as user (guest) mode accesses to kernel (host) segments always generate address error exceptions. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.10.x- Signed-off-by:
-
Oscar authored
[ Upstream commit ea1d39a3 ] Fix warning about tainted kernel because usb-otg-fsm has no license. WARNING: with this patch usb-otg-fsm module can be loaded but then the kernel will hang. Tested with a udoo quad board. Cc: <stable@vger.kernel.org> #v4.1+ Signed-off-by:
Oscar <oscar@naiandei.net> Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
