- 07 Feb, 2024 9 commits
-
-
Heiner Kallweit authored
Convert EEE handling to use linkmode bitmaps. This prepares for removing the legacy bitmaps from struct ethtool_keee. No functional change intended. Note: The change to mii_eee_cap1_mod_linkmode_t(tp->eee.advertised, val) in tg3_phy_autoneg_cfg() isn't completely obvious, but it doesn't change the current functionality. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/0652b910-6bcc-421f-8769-38f7dae5037e@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Heiner Kallweit says: ==================== net: phy: add and use helper phy_advertise_eee_all Per default phylib preserves the EEE advertising at the time of phy probing. The EEE advertising can be changed from user space, in addition this helper allows to set the EEE advertising to all supported modes from drivers in kernel space. ==================== Link: https://lore.kernel.org/r/0d886510-b2b7-43f2-b8a6-fb770d97266d@gmail.comSigned-off-by:
-
Heiner Kallweit authored
Use new helper phy_advertise_eee_all() to simplify the code. Reviewed-by:
-
Heiner Kallweit authored
Per default phylib preserves the EEE advertising at the time of phy probing. The EEE advertising can be changed from user space, in addition this helper allows to set the EEE advertising to all supported modes from drivers in kernel space. Suggested-by:
-
Jakub Kicinski authored
Alessandro Marcolini says: ==================== Add support for encoding multi-attr to ynl This patchset add the support for encoding multi-attr attributes, making it possible to use ynl with qdisc which have this kind of attributes (e.g: taprio, ets). Patch 1 corrects two docstrings in nlspec.py Patch 2 adds the multi-attr attribute to taprio entry Patch 3 adds the support for encoding multi-attr Some examples of what is now possible with the ynl cli: - Add a taprio qdisc --do newqdisc --create --json '{ "family":1, "ifindex":4, "handle":65536, "parent":4294967295, "info":0, "kind":"taprio", "stab":{ "base": { "cell-log": 0, "size-log": 0, "cell-align": 0, "overhead": 31, "linklayer": 0, "mpu": 0, "mtu": 0, "tsize": 0 } }, "options":{ "priomap": { "num-tc": 3, "prio-tc-map": "01010101010101010101010101010101", "hw": 0, "count": "0100010002000000000000000000000000000000000000000000000000000000", "offset": "0100020003000000000000000000000000000000000000000000000000000000" }, "sched-clockid":11, "sched-entry-list": {"entry": [ {"index":0, "cmd":0, "gate-mask":1, "interval":300000}, {"index":1, "cmd":0, "gate-mask":2, "interval":300000}, {"index":2, "cmd":0, "gate-mask":4, "interval":400000} ] }, "sched-base-time":1528743495910289987, "flags": 1 } }' - Add an ets qdisc --create --json '{ "family":1, "ifindex":4, "handle":65536, "parent":4294967295, "kind":"ets", "options":{ "nbands":6, "nstrict":3, "quanta":{ "quanta-band": [3500, 3000, 2500] }, "priomap":{ "priomap-band":[0, 1, 1, 1, 2, 3, 4, 5] } } }' ==================== Link: https://lore.kernel.org/r/cover.1706962013.git.alessandromarcolini99@gmail.comSigned-off-by: -
Alessandro Marcolini authored
Multi-attr elements could not be encoded because of missing logic in the ynl code. Enable encoding of these attributes by checking if the attribute is a multi-attr and if the value to be processed is a list. This has been tested both with the taprio and ets qdisc which contain this kind of attributes. Signed-off-by:
Alessandro Marcolini <alessandromarcolini99@gmail.com> Reviewed-by:
Donald Hunter <donald.hunter@gmail.com> Reviewed-by:
-
Alessandro Marcolini authored
Add multi-attr attribute to tc-taprio-sched-entry to specify multiple entries. Signed-off-by:
-
Alessandro Marcolini authored
Correct typo in SpecAttr docstring. Changed SpecSubMessageFormat docstring. Signed-off-by:
-
Simon Horman authored
Address spelling errors flagged by codespell. This patch follows-up on an earlier patch by Colin Ian King, which addressed a spelling error in a user-visible log message [1]. This patch includes that change. [1] https://lore.kernel.org/netdev/20231209225135.4055334-1-colin.i.king@gmail.com/ This patch is intended to cover all files under drivers/net/ethernet/mellanox/mlx4 Signed-off-by:
Simon Horman <horms@kernel.org> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Reviewed-by:
Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20240205-mlx5-codespell-v1-1-63b86dffbb61@kernel.orgSigned-off-by:
-
- 06 Feb, 2024 31 commits
-
-
Paolo Abeni authored
Christophe says: ==================== nfc: hci: Save a few bytes of memory when registering a 'nfc_llc' engine nfc_llc_register() calls pass a string literal as the 'name' parameter. So kstrdup_const() can be used instead of kfree() to avoid a memory allocation in such cases. ==================== Link: https://lore.kernel.org/r/cover.1706946099.git.christophe.jaillet@wanadoo.frSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Christophe JAILLET authored
nfc_llc_register() calls pass a string literal as the 'name' parameter. So kstrdup_const() can be used instead of kfree() to avoid a memory allocation in such cases. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Christophe JAILLET authored
Add a new helper to avoid code duplication between nfc_llc_exit() and nfc_llc_unregister(). Signed-off-by:
-
Xin Long authored
It is not appropriate for TIPC to use "diag" as its diag module name while the other protocols are using "$(protoname)_diag" like tcp_diag, udp_diag and sctp_diag etc. So this patch is to rename diag.ko to tipc_diag.ko in tipc's Makefile. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Reviewed-by:
Tung Nguyen <tung.q.nguyen@dektech.com.au> Link: https://lore.kernel.org/r/d909edeef072da1810bd5869fdbbfe84411efdb2.1706904669.git.lucien.xin@gmail.comSigned-off-by:
-
Paolo Abeni authored
Brett Creeley says: ==================== pds_core: Various improvements/cleanups This series contains various improvements and cleanups for the pds_core driver. These patches were originally part of the following net-next series: https://lore.kernel.org/netdev/20240126174255.17052-1-brett.creeley@amd.com/ However, some of the patches from the above series were actually fixes, so they were pushed and accepted to net. That series can be found here: https://lore.kernel.org/netdev/20240129234035.69802-1-brett.creeley@amd.com/ Also, the Reviewed-by tags were left in place from the original net-next reviews as the patches didn't change. ==================== Link: https://lore.kernel.org/r/20240202195911.65338-1-brett.creeley@amd.comSigned-off-by:
-
Brett Creeley authored
The setup and teardown flows are somewhat hard to follow regarding pdsc_core_init()/pdsc_dev_init() and their corresponding teardown flows being in pdsc_teardown(). Improve the readability by adding new pdsc_core_uninit()/pdsc_dev_unint() functions that mirror their init counterparts. Also, move the notify and admin qcq allocations into pdsc_core_init(), so they can be freed in pdsc_core_uninit(). Signed-off-by:
Brett Creeley <brett.creeley@amd.com> Reviewed-by:
Shannon Nelson <shannon.nelson@amd.com> Signed-off-by:
-
Brett Creeley authored
Running xmastree.py against the driver found some RCT issues, so fix them. Also, if allocating pdsc->intr_info in pdsc_dev_init() fails the driver still tries to free pdsc->intr_info. Fix this by just returning -ENOMEM since there's nothing to free at this point of failure. Signed-off-by:
-
Brett Creeley authored
Unmasking the interrupt during the pdsc_adminq_isr is a bit early and could cause unnecessary interrupts. Instead always unmask after processing the adminq and notifyq in pdsc_work_thread()->pdsc_process_adminq(). Also, since we are always unmasking, there's no need for the local credits variable in pdsc_process_adminq(). Signed-off-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by:
-
Brett Creeley authored
The notifyq rides on the adminq's interrupt, so there's no need to setup and/or access the notifyq's interrupt index or bound_intr. The driver sets the bound_intr using qcq->intx = -1 for the notifyq, but luckily nothing accesses that field for notifyq. Instead of expecting that remains the case, just clean up the notifyq's interrupt index and bound_intr fields. Signed-off-by:
-
Aahil Awatramani authored
Add support for the independent control state machine per IEEE 802.1AX-2008 5.4.15 in addition to the existing implementation of the coupled control state machine. Introduces two new states, AD_MUX_COLLECTING and AD_MUX_DISTRIBUTING in the LACP MUX state machine for separated handling of an initial Collecting state before the Collecting and Distributing state. This enables a port to be in a state where it can receive incoming packets while not still distributing. This is useful for reducing packet loss when a port begins distributing before its partner is able to collect. Added new functions such as bond_set_slave_tx_disabled_flags and bond_set_slave_rx_enabled_flags to precisely manage the port's collecting and distributing states. Previously, there was no dedicated method to disable TX while keeping RX enabled, which this patch addresses. Note that the regular flow process in the kernel's bonding driver remains unaffected by this patch. The extension requires explicit opt-in by the user (in order to ensure no disruptions for existing setups) via netlink support using the new bonding parameter coupled_control. The default value for coupled_control is set to 1 so as to preserve existing behaviour. Signed-off-by:
Aahil Awatramani <aahila@google.com> Reviewed-by:
Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20240202175858.1573852-1-aahila@google.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queuePaolo Abeni authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-02-02 (ice) This series contains updates to ice driver only. Maciej changes some queue configuration calls to existing ones which are better suited for the purpose. Aniruddha adds separate reporting for Rx EIPE errors as hardware may incorrectly report errors on certain packets. Paul removes an incorrect comment. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: remove incorrect comment ice: Add a new counter for Rx EIPE errors ice: make ice_vsi_cfg_txq() static ice: make ice_vsi_cfg_rxq() static ==================== Link: https://lore.kernel.org/r/20240202175613.3470818-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Russell King (Oracle) authored
Device driver structures are shared between all devices that they match, and thus nothing should never write to the device driver structure through the phydev->drv pointer. Let's make this pointer const to catch code that attempts to do so. Suggested-by:
Christian Marangi <ansuelsmth@gmail.com> Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1rVxXt-002YqY-9G@rmk-PC.armlinux.org.ukSigned-off-by:
-
Sebastian Andrzej Siewior authored
Since commit 52df157f ("xfrm: take refcnt of dst when creating struct xfrm_dst bundle") dst_destroy() returns only NULL and no caller cares about the return value. There are no in in-tree users of dst_destroy() outside of the file. Make dst_destroy() static and return void. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240202163746.2489150-1-bigeasy@linutronix.deSigned-off-by:
-
Paolo Abeni authored
Claudiu Beznea says: ==================== net: ravb: Prepare for suspend to RAM and runtime PM support (part 1) This series prepares ravb driver for runtime PM support and adjust the already existing suspend to RAM code to work for RZ/G3S (R9A08G045) SoC. As there are IP versions that switch to module standby when disabling the clocks, and because of module standby IP switches to reset and the register content is lost, to be able to have runtime PM supported for all IP variants, the configuration operations were moved all to ravb_open()/ravb_close() letting the ravb_probe() and ravb_remove() to deal with resource parsing and allocation/free. The ethtool and IOCTL APIs that could have been run asyncronously were adapted to return if the interface is down. As explained in each individual commits description, this should be harmless. Along with it, the series contains preparatory cleanups. The series has been tested on the boards with the following device trees: - r8a7742-iwg21d-q7.dts - r8a774a1-hihope-rzg2m-ex.dts - r9a07g043u11-smarc-rzg2ul.dts - r9a07g054l2-smarc-rzv2l.dts - r9a07g044l2-smarc-rzg2l.dts Changes in v6: - fixed typo in patch 08/15 - re-arranged the tags as my b4 am/shazam placed the Rb tags before author's Sob tag Changes in v5: - collected tags - fixed typos in patches description - improved description for patch 07/15 - collected tags Changes in v4: - changed cover letter title and keep on 15 patches in series to cope with requirement at [1] - add dependency on RESET_CONTROLLER in patch "net: ravb: Make reset controller support mandatory" - use pm_runtime_active() in patch "net: ravb: Move the IRQs get and request in the probe function" - set config more before reading the mac address in patch "net: ravb: Set config mode in ndo_open and reset mode in ndo_close" - collected tags [1] https://www.kernel.org/doc/html/v6.6/process/maintainer-netdev.html#tl-dr Changes in v3: - collected tags - addressed review comments - squashed patch 17/21 ("net: ravb: Keep clock request operations grouped together") from v2 in patch 07/19 ("net: ravb: Move reference clock enable/disable on runtime PM APIs") from v3 - check for ndev->flags & IFF_UP in patch 17/19 and 18/19 instead of checking netif_running() - dropped patch 19/21 ("net: ravb: Do not set promiscuous mode if the interface is down") as the changes there are not necessary as ndev->flags & IFF_UP is already checked at the beginning of __dev_set_rx_mode() - remove code from ravb_open() introduced by patch 20/21 ("net: ravb: Do not apply RX CSUM settings to hardware if the interface is down") from v2 as this is not necessary; driver already takes care of this in ravb_emac_init_rcar() Changes in v2: - rework the driver (mainly, ravb_open() contains now only resource allocation and parsing leaving the settings to ravb_open(); ravb_remove() has been adapted accordingly) to be able to use runtime PM for all IP variants; due to this number of patches increased - adjust previous series to review comments - collected tags - populated driver's own runtime PM ops with enable/disable of reference clock ==================== Link: https://lore.kernel.org/r/20240202084136.3426492-1-claudiu.beznea.uj@bp.renesas.comSigned-off-by:
-
Claudiu Beznea authored
Remove explicit calls to functions that are called by ravb_open(). There is no need to have them doubled now that the ravb_open() already contains what is needed for the interface configuration. Along with it, configurations needed by PTP were moved to ravb_wol_restore(). With this, code in ravb_resume() becomes simpler. Signed-off-by:
Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by:
-
Claudiu Beznea authored
As ravb_close() contains now the call to ravb_ptp_stop() for both ccc_gac and gPTP aware platforms, there is no need to keep the separate call in ravb_suspend(). Instead, move it to ravb_wol_setup(). In this way the resulting code is cleaner. Signed-off-by:
-
Claudiu Beznea authored
As some IP variants switch to reset mode (and thus the register contents is lost) when setting clocks (due to module standby functionality) to be able to implement runtime PM and save more power, set the IP's operating mode to reset at the end of the probe. Along with it, in the ndo_open API the IP will be switched to configuration, then operation mode. In the ndo_close API, the IP will be switched back to reset mode. This allows implementing runtime PM and, along with it, save more power when the IP is not used. Signed-off-by:
-
Claudiu Beznea authored
The initialization sequence for PTP is the same for platforms with ccc_gac and gptp (according to "Figure 50.71 Flow of gPTP Initialization (Normal, Common to All Modes)" of the R-Car Series, 3rd generation hardware manual and "Figure 37A.53 Flow of gPTP Initialization (Normal, Common to All Modes)" of the RZ/G Series hardware manual). As some IP variants switch to reset mode (and thus the registers content is lost) when setting clocks (due to module standby functionality) to be able to implement runtime PM, move the PTP initialization to the driver's ndo_open API. This commit prepares the code for the addition of runtime PM. Signed-off-by:
-
Claudiu Beznea authored
DBAT setup was done in the driver's probe API. As some IP variants switch to reset mode (and thus registers content is lost) when setting clocks (due to module standby functionality) to be able to implement runtime PM move the DBAT configuration in the driver's ndo_open API. This commit prepares the code for the addition of runtime PM. Signed-off-by:
-
Claudiu Beznea authored
Delay parsing and setting were done in the driver's probe API. As some IP variants switch to reset mode (and thus the register contents is lost) when setting clocks (due to module standby functionality) to be able to implement runtime PM keep the delay parsing in the driver's probe function and move the delay applying function to the driver's ndo_open API. Along with it, ravb_parse_delay_mode() function was moved close to ravb_set_delay_mode() function to have the delay specific code in the same place. Signed-off-by:
-
Claudiu Beznea authored
ravb_set_gti() was computing the value of GTI based on the reference clock rate and then applied it to register. This was done on the driver's probe function. In order to implement runtime PM for all IP variants (as some IP variants switches to reset mode (and thus the registers content is lost) when module standby is configured through clock APIs) the GTI setup was split in 2 parts: one computing the value of the GTI register (done in the driver's probe function) and one applying the computed value to register (done in the driver's ndo_open API). Signed-off-by:
-
Claudiu Beznea authored
The runtime PM implementation will disable clocks at the end of ravb_probe(). As some IP variants switch to reset mode as a result of setting module standby through clock disable APIs, to implement runtime PM the resource parsing and requesting are moved in the probe function and IP settings are moved in the open function. This is done because at the end of the probe some IP variants will switch anyway to reset mode and the registers content is lost. Also keeping only register settings operations in the ravb_open()/ravb_close() functions will make them faster. Commit moves IRQ requests to ravb_probe() to have all the IRQs ready when the interface is open. As now getting/requesting IRQs is done in a single place there is no need to keep intermediary data (like ravb_rx_irqs[] and ravb_tx_irqs[] arrays or IRQs in struct ravb_private). In order to avoid accessing the IP registers while the IP is runtime suspended (e.g. in the timeframe b/w the probe requests shared IRQs and IP clocks are enabled) in the interrupt handlers were introduced pm_runtime_active() checks. The device runtime PM usage counter has been incremented to avoid disabling the device's clocks while the check is in progress (if any). This is a preparatory change to add runtime PM support for all IP variants. Signed-off-by:
-
Claudiu Beznea authored
Reference clock could be or not be part of the power domain. If it is part of the power domain, the power domain takes care of properly setting it. In case it is not part of the power domain and full runtime PM support is available in driver the clock will not be propertly disabled/enabled at runtime. For this, keep the prepare/unprepare operations in the driver's probe()/remove() functions and move the enable/disable in runtime PM functions. By doing this, the previous ravb_runtime_nop() function was renamed ravb_runtime_suspend() and the comment was removed. A proper runtime PM resume function was added (ravb_runtime_resume()). The current driver still don't need to make any register settings on runtime suspend/resume (as expressed in the removed comment) because, currently, pm_runtime_put_sync() is called on the driver remove function. This will be changed in the next commits (that extends the runtime PM support) such that proper register settings (along with runtime resume/suspend) will be done on ravb_open()/ravb_close(). Along with it, the other clock request operations were moved close to reference clock request and prepare to have all the clock requests specific code grouped together. Signed-off-by:
-
Claudiu Beznea authored
RZ/G3S can go to deep sleep states where power to most of the SoC parts is off. When resuming from such a state, the Ethernet controller needs to be reinitialized. De-asserting the reset signal for it should also be done. Thus, add reset assert/de-assert on suspend/resume functions. On the resume function, the de-assert was not reverted in case of failures to give the user a chance to restore the interface (e.g., bringing down/up the interface) in case suspend/resume failed. Signed-off-by:
-
Claudiu Beznea authored
Use tabs instead of spaces in the ravb_set_rate_gbeth() function. This aligns with the coding style requirements. Signed-off-by:
-
Claudiu Beznea authored
SET_SYSTEM_SLEEP_PM_OPS() and SET_RUNTIME_PM_OPS() are deprecated now and require __maybe_unused protection against unused function warnings. The usage of pm_ptr() and SYSTEM_SLEEP_PM_OPS()/RUNTIME_PM_OPS() allows the compiler to see the functions, thus suppressing the warning. Thus drop the __maybe_unused markings. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Claudiu Beznea authored
On the RZ/G3S SoC the reset controller is mandatory for the IP to work. The device tree binding documentation for the ravb driver specifies that the resets are mandatory. Based on this, make the resets mandatory also in driver for all ravb devices. Signed-off-by:
-
Claudiu Beznea authored
ravb_rzv2m_hw_info::gptp_ref_clk is enabled only for RZ/V2M. RZ/V2M is an ARM64-based device which selects power domains by default and CONFIG_PM. The RZ/V2M Ethernet DT node has proper power-domain binding available in device tree from the commit that added the Ethernet node. (4872ca1f ("arm64: dts: renesas: r9a09g011: Add ethernet nodes")). Power domain support was available in the rzg2l-cpg.c driver when the Ethernet DT node has been enabled in RZ/V2M device tree. (ef3c613c ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC")). Thus, remove the explicit clock enable for gptp_clk (and treat it as the other clocks are treated) as it is not needed and removing it doesn't break the ABI according to the above explanations. By removing the enable/disable operation from the driver we can add runtime PM support (which operates on clocks) w/o the need to handle the gptp_clk in the Ethernet driver functions like ravb_runtime_nop(). PM domain does all that is needed. Signed-off-by:
-
Claudiu Beznea authored
ravb_poll() initial code used to interrogate the first descriptor of the RX queue in case gPTP is false to determine if ravb_rx() should be called. This is done for non-gPTP IPs. For gPTP IPs the driver PTP-specific information was used to determine if receive function should be called. As every IP has its own receive function that interrogates the RX descriptors list in the same way the ravb_poll() was doing there is no need to double check this in ravb_poll(). Removing the code from ravb_poll() leads to a cleaner code. Signed-off-by:
-
Bo Liu authored
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. Signed-off-by:
Bo Liu <liubo03@inspur.com> Link: https://lore.kernel.org/r/20240202064336.39138-1-liubo03@inspur.comSigned-off-by:
-
Willem de Bruijn authored
This test is time sensitive. It may fail on virtual machines and for debug builds. Continue to run in these environments to get code coverage. But optionally suppress failure for timing errors (only). This is controlled with environment variable KSFT_MACHINE_SLOW. The test continues to return 0 (KSFT_PASS), rather than KSFT_XFAIL as previously discussed. Because making so_txtime.c return that and then making so_txtime.sh capture runs that pass that vs KSFT_FAIL and pass it on added a bunch of (fragile bash) boilerplate, while the result is interpreted the same as KSFT_PASS anyway. Signed-off-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20240201162130.2278240-1-willemdebruijn.kernel@gmail.comSigned-off-by:
-
