- 15 Oct, 2019 17 commits
-
-
kbuild test robot authored
Fixes: 7532afb35012 ("platform/x86: huawei-wmi: Move to platform driver") Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Andy Shevchenko authored
For APIC case of interrupt we don't fail a ->probe() of the driver, which makes kernel to print a lot of warnings from the children. We have two options here: - switch to platform_get_irq_optional(), though it won't stop children to be probed and failed - fail the ->probe() of i2c-multi-instantiate Since the in reality we never had devices in the wild where IRQ resource is optional, the latter solution suits the best. Fixes: 799d3379 ("platform/x86: i2c-multi-instantiate: Introduce IOAPIC IRQ support") Reported-by: Ammy Yi <ammy.yi@intel.com> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
-
Andy Shevchenko authored
Since the commit 7723f4c5 ("driver core: platform: Add an error message to platform_get_irq*()") the platform_get_irq() started issuing an error message which is not what we want here. Switch to platform_get_irq_optional() to have only warning message provided by the driver. Fixes: 7723f4c5 ("driver core: platform: Add an error message to platform_get_irq*()") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Liming Sun authored
This commit adds the bootctl platform driver for Mellanox BlueField Soc, which queries secure state and controls the eMMC boot partition swapping by sending SMC calls to ATF running at EL3. Below are the sequences of typical use case. 1. User requests boot partition swapping, which could be on-demand or during boot-image upgrade via UEFI capsule; 2. This bootctl driver handles the request and sends SMC call to ATF. ATF programs register BREADCRUMB0 which has value preserved during warm reset. It also programs eMMC to swap the boot partition; 3. After software reset (rebooting), ATF BL1 (BootRom) checks register BREADCRUMB0 and enable watchdog if configured; 4. If booting fails, the watchdog timer will trigger rebooting. In such case, ATF Boot ROM will switch the boot partition back to the previous one. This is a robust feature and used to prevent failure during boot partition upgrade. Reviewed-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Liming Sun <lsun@mellanox.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
yu kuai authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/platform/x86/classmate-laptop.c: In function cmpc_accel_remove_v4: drivers/platform/x86/classmate-laptop.c:424:21: warning: variable accel set but not used [-Wunused-but-set-variable] drivers/platform/x86/classmate-laptop.c: In function cmpc_accel_remove: drivers/platform/x86/classmate-laptop.c:660:21: warning: variable accel set but not used [-Wunused-but-set-variable] In function cmpc_accel_remove_v4 and cmpc_accel_remove, variable accel is set but not used, so it can be removed. In that case, variable inputdev is set but not used and can be removed. Fixes: 7125587d ("classmate-laptop: Add support for Classmate V4 accelerometer.") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: yu kuai <yukuai3@huawei.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Yauhen Kharuzhy authored
Existing intel_cht_int33fe ACPI pseudo-device driver assumes that hardware has Type-C connector and register related devices described as I2C connections in the _CRS resource. There is at least one hardware (Lenovo Yoga Book YB1-91L/F) with Micro-B USB connector exists. It has INT33FE device in the DSDT table but there are only two I2C connection described: PMIC and BQ27452 battery fuel gauge. Splitting existing INT33FE driver allow to maintain code for USB Micro-B (or AB) connector variant separately and make it simpler. Split driver to intel_cht_int33fe_common.c and intel_cht_int33fe_{microb,typec}.c. Compile all this sources to one .ko module to make user experience easier. Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Dmitry Torokhov authored
The driver does not use polling mode of input devices, and this config option is going away, so let's not reference it. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Dmitry Torokhov authored
We have added polled mode to the normal input devices with the intent of retiring input_polled_dev. This converts peaq-wmi driver to use the polling mode of standard input devices and removes dependency on INPUT_POLLDEV. Because the new polling coded does not allow peeking inside the poller structure to get the poll interval, we change the "debounce" process to operate on the time basis, instead of counting events. We also fix error handling during initialization, as previously we leaked input device structure when we failed to register it. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Dmitry Torokhov authored
We have added polled mode to the normal input devices with the intent of retiring input_polled_dev. This converts hdaps driver to use the polling mode of standard input devices and removes dependency on INPUT_POLLDEV. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Dmitry Torokhov authored
We have added polled mode to the normal input devices with the intent of retiring input_polled_dev. This converts Asus laptop driver to use the polling mode of standard input devices and removes dependency on INPUT_POLLDEV. Also removed no longed needed set_bit(EV_ABS, ...) as input_set_abs_oarams() does it for us. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Pacien TRAN-GIRARD authored
This patch adds a quirk disabling keyboard backlight support for the Dell Inspiron 1012 and 1018. Those models wrongly report supporting keyboard backlight control features (through SMBIOS tokens) even though they're not equipped with a backlit keyboard. This led to broken controls being exposed through sysfs by this driver which froze the system when used. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107651Signed-off-by: Pacien TRAN-GIRARD <pacien.trangirard@pacien.net> Reviewed-by: Mario Limonciello <mario.limonciello@dell.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Ayman Bagabas authored
Add a debugfs interface that can be used to call the WMI management interface function if available. Signed-off-by: Ayman Bagabas <ayman.bagabas@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Ayman Bagabas authored
Huawei Matebook laptops uses Fn key and toggle to access F1-F12 keys. Along with that, there is this feature called fn-lock that inverts the behavior of this Fn key and the F1-F12 row. Signed-off-by: Ayman Bagabas <ayman.bagabas@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Ayman Bagabas authored
Control battery charge thresholds through the battery API and driver's attributes. Setting battery charging thresholds can introduce a race condition with MACH-WX9 where two or more threads are trying to read/write values from/to EC memory. Signed-off-by: Ayman Bagabas <ayman.bagabas@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Ayman Bagabas authored
Huawei Matebook laptops come with a WMI management interface that can control various aspects of the device. This interface is also found on the old Matebook X released in 2017. Use that to control the mic mute LED. Signed-off-by: Ayman Bagabas <ayman.bagabas@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Ayman Bagabas authored
Introduce quirks and module parameters. 3 quirks are added: 1. Fixes reporting brightness keys twice since it's already handled by acpi-video. 2. Some models need a short delay when setting battery thresholds to prevent a race condition when two processes read/write. (will be used later) 3. Matebook X (2017) handles micmute led through the "legacy" interface which is not currently implemented. Use ACPI EC method to control this led. (will be used later) 2 module parameters are added to enable this short delay and/or report brightness keys through this driver. Signed-off-by: Ayman Bagabas <ayman.bagabas@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Ayman Bagabas authored
Move from WMI driver to platform driver. This move is necessary since the driver is no longer a hotkeys driver only. Platform driver makes it easier for users to access sysfs attributes under (i.e. /sys/devices/platform/huawei-wmi) compared to wmi driver. Use WMI device UID, AMW0 has a UID of HWMI. WMI0 is the device name and doesn't have a UID so keep it as it is. Signed-off-by: Ayman Bagabas <ayman.bagabas@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
- 13 Oct, 2019 16 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "A few tracing fixes: - Remove lockdown from tracefs itself and moved it to the trace directory. Have the open functions there do the lockdown checks. - Fix a few races with opening an instance file and the instance being deleted (Discovered during the lockdown updates). Kept separate from the clean up code such that they can be backported to stable easier. - Clean up and consolidated the checks done when opening a trace file, as there were multiple checks that need to be done, and it did not make sense having them done in each open instance. - Fix a regression in the record mcount code. - Small hw_lat detector tracer fixes. - A trace_pipe read fix due to not initializing trace_seq" * tag 'trace-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Initialize iter->seq after zeroing in tracing_read_pipe() tracing/hwlat: Don't ignore outer-loop duration when calculating max_latency tracing/hwlat: Report total time spent in all NMIs during the sample recordmcount: Fix nop_mcount() function tracing: Do not create tracefs files if tracefs lockdown is in effect tracing: Add locked_down checks to the open calls of files created for tracefs tracing: Add tracing_check_open_get_tr() tracing: Have trace events system open call tracing_open_generic_tr() tracing: Get trace_array reference for available_tracers files ftrace: Get a reference counter for the trace_array on filter files tracefs: Revert ccbd54ff ("tracefs: Restrict tracefs when the kernel is locked down")
-
Linus Torvalds authored
Merge tag 'hwmon-for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Update/fix inspur-ipsps1 and k10temp Documentation - Fix nct7904 driver - Fix HWMON_P_MIN_ALARM mask in hwmon core * tag 'hwmon-for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: docs: Extend inspur-ipsps1 title underline hwmon: (nct7904) Add array fan_alarm and vsen_alarm to store the alarms in nct7904_data struct. docs: hwmon: Include 'inspur-ipsps1.rst' into docs hwmon: Fix HWMON_P_MIN_ALARM mask hwmon: (k10temp) Update documentation and add temp2_input info hwmon: (nct7904) Fix the incorrect value of vsen_mask in nct7904_data struct
-
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linuxLinus Torvalds authored
Pull MTD fixes from Richard Weinberger: "Two fixes for MTD: - spi-nor: Fix for a regression in write_sr() - rawnand: Regression fix for the au1550nd driver" * tag 'fixes-for-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: au1550nd: Fix au_read_buf16() prototype mtd: spi-nor: Fix direction of the write_sr() transfer
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fix from Jens Axboe: "Single small fix for a regression in the sequence logic for linked commands" * tag 'for-linus-20191012' of git://git.kernel.dk/linux-block: io_uring: fix sequence logic for timeout requests
-
Petr Mladek authored
A customer reported the following softlockup: [899688.160002] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [test.sh:16464] [899688.160002] CPU: 0 PID: 16464 Comm: test.sh Not tainted 4.12.14-6.23-azure #1 SLE12-SP4 [899688.160002] RIP: 0010:up_write+0x1a/0x30 [899688.160002] Kernel panic - not syncing: softlockup: hung tasks [899688.160002] RIP: 0010:up_write+0x1a/0x30 [899688.160002] RSP: 0018:ffffa86784d4fde8 EFLAGS: 00000257 ORIG_RAX: ffffffffffffff12 [899688.160002] RAX: ffffffff970fea00 RBX: 0000000000000001 RCX: 0000000000000000 [899688.160002] RDX: ffffffff00000001 RSI: 0000000000000080 RDI: ffffffff970fea00 [899688.160002] RBP: ffffffffffffffff R08: ffffffffffffffff R09: 0000000000000000 [899688.160002] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8b59014720d8 [899688.160002] R13: ffff8b59014720c0 R14: ffff8b5901471090 R15: ffff8b5901470000 [899688.160002] tracing_read_pipe+0x336/0x3c0 [899688.160002] __vfs_read+0x26/0x140 [899688.160002] vfs_read+0x87/0x130 [899688.160002] SyS_read+0x42/0x90 [899688.160002] do_syscall_64+0x74/0x160 It caught the process in the middle of trace_access_unlock(). There is no loop. So, it must be looping in the caller tracing_read_pipe() via the "waitagain" label. Crashdump analyze uncovered that iter->seq was completely zeroed at this point, including iter->seq.seq.size. It means that print_trace_line() was never able to print anything and there was no forward progress. The culprit seems to be in the code: /* reset all but tr, trace, and overruns */ memset(&iter->seq, 0, sizeof(struct trace_iterator) - offsetof(struct trace_iterator, seq)); It was added by the commit 53d0aa77 ("ftrace: add logic to record overruns"). It was v2.6.27-rc1. It was the time when iter->seq looked like: struct trace_seq { unsigned char buffer[PAGE_SIZE]; unsigned int len; }; There was no "size" variable and zeroing was perfectly fine. The solution is to reinitialize the structure after or without zeroing. Link: http://lkml.kernel.org/r/20191011142134.11997-1-pmladek@suse.comSigned-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Srivatsa S. Bhat (VMware) authored
max_latency is intended to record the maximum ever observed hardware latency, which may occur in either part of the loop (inner/outer). So we need to also consider the outer-loop sample when updating max_latency. Link: http://lkml.kernel.org/r/157073345463.17189.18124025522664682811.stgit@srivatsa-ubuntu Fixes: e7c15cd8 ("tracing: Added hardware latency tracer") Cc: stable@vger.kernel.org Signed-off-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Srivatsa S. Bhat (VMware) authored
nmi_total_ts is supposed to record the total time spent in *all* NMIs that occur on the given CPU during the (active portion of the) sampling window. However, the code seems to be overwriting this variable for each NMI, thereby only recording the time spent in the most recent NMI. Fix it by accumulating the duration instead. Link: http://lkml.kernel.org/r/157073343544.17189.13911783866738671133.stgit@srivatsa-ubuntu Fixes: 7b2c8625 ("tracing: Add NMI tracing in hwlat detector") Cc: stable@vger.kernel.org Signed-off-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
The removal of the longjmp code in recordmcount.c mistakenly made the return of make_nop() being negative an exit of nop_mcount(). It should not exit the routine, but instead just not process that part of the code. By exiting with an error code, it would cause the update of recordmcount to fail some files which would fail the build if ftrace function tracing was enabled. Link: http://lkml.kernel.org/r/20191009110538.5909fec6@gandalf.local.homeReported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 3f1df120 ("recordmcount: Rewrite error/success handling") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
If on boot up, lockdown is activated for tracefs, don't even bother creating the files. This can also prevent instances from being created if lockdown is in effect. Link: http://lkml.kernel.org/r/CAHk-=whC6Ji=fWnjh2+eS4b15TnbsS4VPVtvBOwCy1jjEG_JHQ@mail.gmail.comSuggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
Added various checks on open tracefs calls to see if tracefs is in lockdown mode, and if so, to return -EPERM. Note, the event format files (which are basically standard on all machines) as well as the enabled_functions file (which shows what is currently being traced) are not lockde down. Perhaps they should be, but it seems counter intuitive to lockdown information to help you know if the system has been modified. Link: http://lkml.kernel.org/r/CAHk-=wj7fGPKUspr579Cii-w_y60PtRaiDgKuxVtBAMK0VNNkA@mail.gmail.comSuggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
Currently, most files in the tracefs directory test if tracing_disabled is set. If so, it should return -ENODEV. The tracing_disabled is called when tracing is found to be broken. Originally it was done in case the ring buffer was found to be corrupted, and we wanted to prevent reading it from crashing the kernel. But it's also called if a tracing selftest fails on boot. It's a one way switch. That is, once it is triggered, tracing is disabled until reboot. As most tracefs files can also be used by instances in the tracefs directory, they need to be carefully done. Each instance has a trace_array associated to it, and when the instance is removed, the trace_array is freed. But if an instance is opened with a reference to the trace_array, then it requires looking up the trace_array to get its ref counter (as there could be a race with it being deleted and the open itself). Once it is found, a reference is added to prevent the instance from being removed (and the trace_array associated with it freed). Combine the two checks (tracing_disabled and trace_array_get()) into a single helper function. This will also make it easier to add lockdown to tracefs later. Link: http://lkml.kernel.org/r/20191011135458.7399da44@gandalf.local.homeSigned-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
Instead of having the trace events system open call open code the taking of the trace_array descriptor (with trace_array_get()) and then calling trace_open_generic(), have it use the tracing_open_generic_tr() that does the combination of the two. This requires making tracing_open_generic_tr() global. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
As instances may have different tracers available, we need to look at the trace_array descriptor that shows the list of the available tracers for the instance. But there's a race between opening the file and an admin deleting the instance. The trace_array_get() needs to be called before accessing the trace_array. Cc: stable@vger.kernel.org Fixes: 607e2ea1 ("tracing: Set up infrastructure to allow tracers for instances") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
The ftrace set_ftrace_filter and set_ftrace_notrace files are specific for an instance now. They need to take a reference to the instance otherwise there could be a race between accessing the files and deleting the instance. It wasn't until the :mod: caching where these file operations started referencing the trace_array directly. Cc: stable@vger.kernel.org Fixes: 673feb9d ("ftrace: Add :mod: caching infrastructure to trace_array") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
Running the latest kernel through my "make instances" stress tests, I triggered the following bug (with KASAN and kmemleak enabled): mkdir invoked oom-killer: gfp_mask=0x40cd0(GFP_KERNEL|__GFP_COMP|__GFP_RECLAIMABLE), order=0, oom_score_adj=0 CPU: 1 PID: 2229 Comm: mkdir Not tainted 5.4.0-rc2-test #325 Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014 Call Trace: dump_stack+0x64/0x8c dump_header+0x43/0x3b7 ? trace_hardirqs_on+0x48/0x4a oom_kill_process+0x68/0x2d5 out_of_memory+0x2aa/0x2d0 __alloc_pages_nodemask+0x96d/0xb67 __alloc_pages_node+0x19/0x1e alloc_slab_page+0x17/0x45 new_slab+0xd0/0x234 ___slab_alloc.constprop.86+0x18f/0x336 ? alloc_inode+0x2c/0x74 ? irq_trace+0x12/0x1e ? tracer_hardirqs_off+0x1d/0xd7 ? __slab_alloc.constprop.85+0x21/0x53 __slab_alloc.constprop.85+0x31/0x53 ? __slab_alloc.constprop.85+0x31/0x53 ? alloc_inode+0x2c/0x74 kmem_cache_alloc+0x50/0x179 ? alloc_inode+0x2c/0x74 alloc_inode+0x2c/0x74 new_inode_pseudo+0xf/0x48 new_inode+0x15/0x25 tracefs_get_inode+0x23/0x7c ? lookup_one_len+0x54/0x6c tracefs_create_file+0x53/0x11d trace_create_file+0x15/0x33 event_create_dir+0x2a3/0x34b __trace_add_new_event+0x1c/0x26 event_trace_add_tracer+0x56/0x86 trace_array_create+0x13e/0x1e1 instance_mkdir+0x8/0x17 tracefs_syscall_mkdir+0x39/0x50 ? get_dname+0x31/0x31 vfs_mkdir+0x78/0xa3 do_mkdirat+0x71/0xb0 sys_mkdir+0x19/0x1b do_fast_syscall_32+0xb0/0xed I bisected this down to the addition of the proxy_ops into tracefs for lockdown. It appears that the allocation of the proxy_ops and then freeing it in the destroy_inode callback, is causing havoc with the memory system. Reading the documentation about destroy_inode and talking with Linus about this, this is buggy and wrong. When defining the destroy_inode() method, it is expected that the destroy_inode() will also free the inode, and not just the extra allocations done in the creation of the inode. The faulty commit causes a memory leak of the inode data structure when they are deleted. Instead of allocating the proxy_ops (and then having to free it) the checks should be done by the open functions themselves, and not hack into the tracefs directory. First revert the tracefs updates for locked_down and then later we can add the locked_down checks in the kernel/trace files. Link: http://lkml.kernel.org/r/20191011135458.7399da44@gandalf.local.home Fixes: ccbd54ff ("tracefs: Restrict tracefs when the kernel is locked down") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
- 12 Oct, 2019 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some small char/misc driver fixes for 5.4-rc3. Nothing huge here. Some binder driver fixes (although it is still being discussed if these all fix the reported issues or not, so more might be coming later), some mei device ids and fixes, and a google firmware driver bugfix that fixes a regression, as well as some other tiny fixes. All have been in linux-next with no reported issues" * tag 'char-misc-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: firmware: google: increment VPD key_len properly w1: ds250x: Fix build error without CRC16 virt: vbox: fix memory leak in hgcm_call_preprocess_linaddr binder: Fix comment headers on binder_alloc_prepare_to_free() binder: prevent UAF read in print_binder_transaction_log_entry() misc: fastrpc: prevent memory leak in fastrpc_dma_buf_attach mei: avoid FW version request on Ibex Peak and earlier mei: me: add comet point (lake) LP device ids
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/IIO driver fixes from Greg KH: "Here are some staging and IIO driver fixes for 5.4-rc3. The "biggest" thing here is a removal of the fbtft device and flexfb code as they have been abandoned by their authors and are no longer needed for that hardware. Other than that, the usual amount of staging driver and iio driver fixes for reported issues, and some speakup sysfs file documentation, which has been long awaited for. All have been in linux-next with no reported issues" * tag 'staging-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (32 commits) iio: Fix an undefied reference error in noa1305_probe iio: light: opt3001: fix mutex unlock race iio: adc: ad799x: fix probe error handling iio: light: add missing vcnl4040 of_compatible iio: light: fix vcnl4000 devicetree hooks iio: imu: st_lsm6dsx: fix waitime for st_lsm6dsx i2c controller iio: adc: axp288: Override TS pin bias current for some models iio: imu: adis16400: fix memory leak iio: imu: adis16400: release allocated memory on failure iio: adc: stm32-adc: fix a race when using several adcs with dma and irq iio: adc: stm32-adc: move registers definitions iio: accel: adxl372: Perform a reset at start up iio: accel: adxl372: Fix push to buffers lost samples iio: accel: adxl372: Fix/remove limitation for FIFO samples iio: adc: hx711: fix bug in sampling of data staging: vt6655: Fix memory leak in vt6655_probe staging: exfat: Use kvzalloc() instead of kzalloc() for exfat_sb_info Staging: fbtft: fix memory leak in fbtft_framebuffer_alloc staging: speakup: document sysfs attributes staging: rtl8188eu: fix HighestRate check in odm_ARFBRefresh_8188E() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver fixes from Greg KH: "Here are some small tty and serial driver fixes for 5.4-rc3 that resolve a number of reported issues and regressions. None of these are huge, full details are in the shortlog. There's also a MAINTAINERS update that I think you might have already taken in your tree already, but git should handle that merge easily. All have been in linux-next with no reported issues" * tag 'tty-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: MAINTAINERS: kgdb: Add myself as a reviewer for kgdb/kdb tty: serial: imx: Use platform_get_irq_optional() for optional IRQs serial: fix kernel-doc warning in comments serial: 8250_omap: Fix gpio check for auto RTS/CTS serial: mctrl_gpio: Check for NULL pointer tty: serial: fsl_lpuart: Fix lpuart_flush_buffer() tty: serial: Fix PORT_LINFLEXUART definition tty: n_hdlc: fix build on SPARC serial: uartps: Fix uartps_major handling serial: uartlite: fix exit path null pointer tty: serial: linflexuart: Fix magic SysRq handling serial: sh-sci: Use platform_get_irq_optional() for optional interrupts dt-bindings: serial: sh-sci: Document r8a774b1 bindings serial/sifive: select SERIAL_EARLYCON tty: serial: rda: Fix the link time qualifier of 'rda_uart_exit()' tty: serial: owl: Fix the link time qualifier of 'owl_uart_exit()'
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are a lot of small USB driver fixes for 5.4-rc3. syzbot has stepped up its testing of the USB driver stack, now able to trigger fun race conditions between disconnect and probe functions. Because of that we have a lot of fixes in here from Johan and others fixing these reported issues that have been around since almost all time. We also are just deleting the rio500 driver, making all of the syzbot bugs found in it moot as it turns out no one has been using it for years as there is a userspace version that is being used instead. There are also a number of other small fixes in here, all resolving reported issues or regressions. All have been in linux-next without any reported issues" * tag 'usb-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (65 commits) USB: yurex: fix NULL-derefs on disconnect USB: iowarrior: use pr_err() USB: iowarrior: drop redundant iowarrior mutex USB: iowarrior: drop redundant disconnect mutex USB: iowarrior: fix use-after-free after driver unbind USB: iowarrior: fix use-after-free on release USB: iowarrior: fix use-after-free on disconnect USB: chaoskey: fix use-after-free on release USB: adutux: fix use-after-free on release USB: ldusb: fix NULL-derefs on driver unbind USB: legousbtower: fix use-after-free on release usb: cdns3: Fix for incorrect DMA mask. usb: cdns3: fix cdns3_core_init_role() usb: cdns3: gadget: Fix full-speed mode USB: usb-skeleton: drop redundant in-urb check USB: usb-skeleton: fix use-after-free after driver unbind USB: usb-skeleton: fix NULL-deref on disconnect usb:cdns3: Fix for CV CH9 running with g_zero driver. usb: dwc3: Remove dev_err() on platform_get_irq() failure usb: dwc3: Switch to platform_get_irq_byname_optional() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Two fixes: a guest-cputime accounting fix, and a cgroup bandwidth quota precision fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/vtime: Fix guest/system mis-accounting on task switch sched/fair: Scale bandwidth quota and period without losing quota/period ratio precision
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, but also a couple of updates for new Intel models (which are technically hw-enablement, but to users it's a fix to perf behavior on those new CPUs - hope this is fine), an AUX inheritance fix, event time-sharing fix, and a fix for lost non-perf NMI events on AMD systems" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) perf/x86/cstate: Add Tiger Lake CPU support perf/x86/msr: Add Tiger Lake CPU support perf/x86/intel: Add Tiger Lake CPU support perf/x86/cstate: Update C-state counters for Ice Lake perf/x86/msr: Add new CPU model numbers for Ice Lake perf/x86/cstate: Add Comet Lake CPU support perf/x86/msr: Add Comet Lake CPU support perf/x86/intel: Add Comet Lake CPU support perf/x86/amd: Change/fix NMI latency mitigation to use a timestamp perf/core: Fix corner case in perf_rotate_context() perf/core: Rework memory accounting in perf_mmap() perf/core: Fix inheritance of aux_output groups perf annotate: Don't return -1 for error when doing BPF disassembly perf annotate: Return appropriate error code for allocation failures perf annotate: Fix arch specific ->init() failure errors perf annotate: Propagate the symbol__annotate() error return perf annotate: Fix the signedness of failure returns perf annotate: Propagate perf_env__arch() error perf evsel: Fall back to global 'perf_env' in perf_evsel__env() perf tools: Propagate get_cpuid() error ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI fixes from Ingo Molnar: "Misc EFI fixes all across the map: CPER error report fixes, fixes to TPM event log parsing, fix for a kexec hang, a Sparse fix and other fixes" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/tpm: Fix sanity check of unsigned tbl_size being less than zero efi/x86: Do not clean dummy variable in kexec path efi: Make unexported efi_rci2_sysfs_init() static efi/tpm: Only set 'efi_tpm_final_log_size' after successful event log parsing efi/tpm: Don't traverse an event log with no events efi/tpm: Don't access event->count when it isn't mapped efivar/ssdt: Don't iterate over EFI vars if no SSDT override was specified efi/cper: Fix endianness of PCIe class code
-