- 11 Aug, 2023 2 commits
-
-
Christoph Hellwig authored
fs_mark_dead currently uses get_super to find the superblock for the block device that is going away. This means it is limited to the main device stored in sb->s_dev, leading to a lot of code duplication for file systems that can use multiple block devices. Now that the holder for all block devices used by file systems is set to the super_block, we can instead look at that holder and then check if the file system is born and active, so do that instead. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Christian Brauner <brauner@kernel.org> Message-Id: <20230802154131.2221419-8-hch@lst.de> Signed-off-by:
-
Christoph Hellwig authored
The file system type is not a very useful holder as it doesn't allow us to go back to the actual file system instance. Pass the super_block instead which is useful when passed back to the file system driver. Signed-off-by:
-
- 10 Aug, 2023 17 commits
-
-
Christoph Hellwig authored
Check for sb->s_type which is the right place to look at the file system type, not the holder, which is just an implementation detail in the VFS helpers. Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
-
Christoph Hellwig authored
Use the generic setup_bdev_super helper to open the main block device and do various bits of superblock setup instead of duplicating the logic. This includes moving to the new scheme implemented in common code that only opens the block device after the superblock has allocated. It does not yet convert nilfs2 to the new mount API, but doing so will become a bit simpler after this first step. Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@gmail.com> Message-Id: <20230802154131.2221419-3-hch@lst.de> Signed-off-by:
-
Christoph Hellwig authored
We'll want to use setup_bdev_super instead of duplicating it in nilfs2. Signed-off-by:
-
Jan Kara authored
Currently get_tree_bdev and mount_bdev open the block device before committing to allocating a super block. That creates problems for restricting the number of writers to a device, and also leads to a unusual and not very helpful holder (the fs_type). Reorganize the super block code to first look whether the superblock for a particular device does already exist and open the block device only if it doesn't. [hch: port to before the bdev_handle changes, duplicate the bdev read-only check from blkdev_get_by_path, extend the fsfree_mutex coverage to protect against freezes, fix an open bdev leak when the bdev is frozen, use the bdev local variable more, rename the s variable to sb to be more descriptive] [brauner: remove references to mounts as they're mostly irrelevant] [brauner & hch: fold fixes for romfs and cramfs for syzbot+2faac0423fdc9692822b@syzkaller.appspotmail.com] Signed-off-by: -
Christoph Hellwig authored
As a rule of thumb everything allocated to the fs_context and moved into the super_block should be freed by ->kill_sb so that the teardown handling doesn't need to be duplicated between the fill_super error path and put_super. Implement an ntfs3-specific kill_sb method to do that. Signed-off-by:
-
Christoph Hellwig authored
kill_block_super will call sync_blockdev just a tad later already. Signed-off-by:
-
Christoph Hellwig authored
put_ntfs is a rather unconventional name for a function that frees the sbi and associated resources. Give it a more descriptive name and drop the duplicate name in the top of the function comment. Signed-off-by:
-
Christoph Hellwig authored
As a rule of thumb everything allocated to the fs_context and moved into the super_block should be freed by ->kill_sb so that the teardown handling doesn't need to be duplicated between the fill_super error path and put_super. Implement an exfat-specific kill_sb method to do that and share the code with the mount contex free helper for the mount error handling case. Signed-off-by:
-
Christoph Hellwig authored
There are no RCU critical sections for accessing any information in the sbi, so drop the call_rcu indirection for freeing the sbi. Signed-off-by:
-
Christoph Hellwig authored
blkdev_put must not be called under sb->s_umount to avoid a lock order reversal with disk->open_mutex. Move closing the external journal device into ->kill_sb to archive that. Signed-off-by:
-
Christoph Hellwig authored
Copy and paste the commit message from Darrick into a comment to explain the seemingly odd invalidate_bdev in xfs_shutdown_devices. Signed-off-by:
"Darrick J. Wong" <djwong@kernel.org> Message-Id: <20230809220545.1308228-8-hch@lst.de> Signed-off-by:
-
Christoph Hellwig authored
blkdev_put must not be called under sb->s_umount to avoid a lock order reversal with disk->open_mutex. Move closing the buftargs into ->kill_sb to archive that. Note that the flushing of the disk caches and block device mapping invalidated needs to stay in ->put_super as the main block device is closed in kill_block_super already. Signed-off-by:
-
Christoph Hellwig authored
Closing the block devices logically belongs into xfs_free_buftarg, So instead of open coding it in the caller move it there and add a check for the s_bdev so that the main device isn't close as that's done by the VFS helper. Signed-off-by:
-
Christoph Hellwig authored
There isn't much use for this trivial wrapper, especially as the NULL check is only needed in a single call site. Signed-off-by:
-
Christoph Hellwig authored
As a rule of thumb everything allocated to the fs_context and moved into the super_block should be freed by ->kill_sb so that the teardown handling doesn't need to be duplicated between the fill_super error path and put_super. Implement a XFS-specific kill_sb method to do that. Signed-off-by:
-
Christoph Hellwig authored
->put_super is only called when sb->s_root is set, and thus when fill_super succeeds. Thus drop the NULL check that can't happen in xfs_fs_put_super. Signed-off-by:
-
Christoph Hellwig authored
The xfs_fs_free prototype formatting is a weird mix of the classic XFS style and the Linux style. Fix it up to be consistent. Signed-off-by:
-
- 09 Aug, 2023 4 commits
-
-
Christoph Hellwig authored
bdev->bd_super is unused now, remove it. Signed-off-by:
-
Christoph Hellwig authored
All ocfs2 journal error handling and logging is based on buffer_heads, and the owning inode and thus super_block can be retrieved through bh->b_assoc_map->host. Switch to using that to remove the last users of bdev->bd_super. Signed-off-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Message-Id: <20230807112625.652089-4-hch@lst.de> Signed-off-by:
-
Christoph Hellwig authored
__ext4_journal_get_write_access already has a super_block available, and there is no need to go from that to the bdev to go back to the owning super_block. Signed-off-by:
-
Christoph Hellwig authored
bdev->bd_super is a somewhat awkward backpointer from a block device to an owning file system with unclear rules. For the buffer_head code we already have a good backpointer for the inode that the buffer_head is associated with, even if it lives on the block device mapping: b_assoc_map. It is used track dirty buffers associated with an inode but living on the block device mapping like directory buffers in ext4. mark_buffer_write_io_error already uses it for the call to mapping_set_error, and should be doing the same for the per-sb error sequence. Signed-off-by:
-
- 09 Jul, 2023 10 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
We just sorted the entries and fields last release, so just out of a perverse sense of curiosity, I decided to see if we can keep things ordered for even just one release. The answer is "No. No we cannot". I suggest that all kernel developers will need weekly training sessions, involving a lot of Big Bird and Sesame Street. And at the yearly maintainer summit, we will all sing the alphabet song together. I doubt I will keep doing this. At some point "perverse sense of curiosity" turns into just a cold dark place filled with sadness and despair. Repeats: 80e62bc8 ("MAINTAINERS: re-sort all entries and fields") Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fixes from Christoph Hellwig: - swiotlb area sizing fixes (Petr Tesarik) * tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: reduce the number of areas to match actual memory pool size swiotlb: always set the number of areas before allocating the pool
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq update from Borislav Petkov: - Optimize IRQ domain's name assignment * tag 'irq_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqdomain: Use return value of strreplace()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fpu fix from Borislav Petkov: - Do FPU AP initialization on Xen PV too which got missed by the recent boot reordering work * tag 'x86_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/xen: Fix secondary processors' FPU initialization
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Thomas Gleixner: "A single fix for the mechanism to park CPUs with an INIT IPI. On shutdown or kexec, the kernel tries to park the non-boot CPUs with an INIT IPI. But the same code path is also used by the crash utility. If the CPU which panics is not the boot CPU then it sends an INIT IPI to the boot CPU which resets the machine. Prevent this by validating that the CPU which runs the stop mechanism is the boot CPU. If not, leave the other CPUs in HLT" * tag 'x86-core-2023-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/smp: Don't send INIT to boot CPU
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Thomas Bogendoerfer: - fixes for KVM - fix for loongson build and cpu probing - DT fixes * tag 'mips_6.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: kvm: Fix build error with KVM_MIPS_DEBUG_COP0_COUNTERS enabled MIPS: dts: add missing space before { MIPS: Loongson: Fix build error when make modules_install MIPS: KVM: Fix NULL pointer dereference MIPS: Loongson: Fix cpu_probe_loongson() again
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fix from Darrick Wong: "Nothing exciting here, just getting rid of a gcc warning that I got tired of seeing when I turn on gcov" * tag 'xfs-6.5-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix uninit warning in xfs_growfs_data
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull more smb client updates from Steve French: - fix potential use after free in unmount - minor cleanup - add worker to cleanup stale directory leases * tag '6.5-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: Add a laundromat thread for cached directories smb: client: remove redundant pointer 'server' cifs: fix session state transition to avoid use-after-free issue
-
https://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB updates from Jon Mason: "Fixes for pci_clean_master, error handling in driver inits, and various other issues/bugs" * tag 'ntb-6.5' of https://github.com/jonmason/ntb: ntb: hw: amd: Fix debugfs_create_dir error checking ntb.rst: Fix copy and paste error ntb_netdev: Fix module_init problem ntb: intel: Remove redundant pci_clear_master ntb: epf: Remove redundant pci_clear_master ntb_hw_amd: Remove redundant pci_clear_master ntb: idt: drop redundant pci_enable_pcie_error_reporting() MAINTAINERS: git://github -> https://github.com for jonmason NTB: EPF: fix possible memory leak in pci_vntb_probe() NTB: ntb_tool: Add check for devm_kcalloc NTB: ntb_transport: fix possible memory leak while device_register() fails ntb: intel: Fix error handling in intel_ntb_pci_driver_init() NTB: amd: Fix error handling in amd_ntb_pci_driver_init() ntb: idt: Fix error handling in idt_pci_driver_init()
-
- 08 Jul, 2023 7 commits
-
-
Hugh Dickins authored
Lockdep is certainly right to complain about (&vma->vm_lock->lock){++++}-{3:3}, at: vma_start_write+0x2d/0x3f but task is already holding lock: (&mapping->i_mmap_rwsem){+.+.}-{3:3}, at: mmap_region+0x4dc/0x6db Invert those to the usual ordering. Fixes: 33313a74 ("mm: lock newly mapped VMA which can be modified after it becomes visible") Cc: stable@vger.kernel.org Signed-off-by:Hugh Dickins <hughd@google.com> Tested-by:
Suren Baghdasaryan <surenb@google.com> Signed-off-by:
-
Linus Torvalds authored
Merge tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull hotfixes from Andrew Morton: "16 hotfixes. Six are cc:stable and the remainder address post-6.4 issues" The merge undoes the disabling of the CONFIG_PER_VMA_LOCK feature, since it was all hopefully fixed in mainline. * tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: lib: dhry: fix sleeping allocations inside non-preemptable section kasan, slub: fix HW_TAGS zeroing with slub_debug kasan: fix type cast in memory_is_poisoned_n mailmap: add entries for Heiko Stuebner mailmap: update manpage link bootmem: remove the vmemmap pages from kmemleak in free_bootmem_page MAINTAINERS: add linux-next info mailmap: add Markus Schneider-Pargmann writeback: account the number of pages written back mm: call arch_swap_restore() from do_swap_page() squashfs: fix cache race with migration mm/hugetlb.c: fix a bug within a BUG(): inconsistent pte comparison docs: update ocfs2-devel mailing list address MAINTAINERS: update ocfs2-devel mailing list address mm: disable CONFIG_PER_VMA_LOCK until its fixed fork: lock VMAs of the parent process when forking
-
Suren Baghdasaryan authored
When forking a child process, the parent write-protects anonymous pages and COW-shares them with the child being forked using copy_present_pte(). We must not take any concurrent page faults on the source vma's as they are being processed, as we expect both the vma and the pte's behind it to be stable. For example, the anon_vma_fork() expects the parents vma->anon_vma to not change during the vma copy. A concurrent page fault on a page newly marked read-only by the page copy might trigger wp_page_copy() and a anon_vma_prepare(vma) on the source vma, defeating the anon_vma_clone() that wasn't done because the parent vma originally didn't have an anon_vma, but we now might end up copying a pte entry for a page that has one. Before the per-vma lock based changes, the mmap_lock guaranteed exclusion with concurrent page faults. But now we need to do a vma_start_write() to make sure no concurrent faults happen on this vma while it is being processed. This fix can potentially regress some fork-heavy workloads. Kernel build time did not show noticeable regression on a 56-core machine while a stress test mapping 10000 VMAs and forking 5000 times in a tight loop shows ~5% regression. If such fork time regression is unacceptable, disabling CONFIG_PER_VMA_LOCK should restore its performance. Further optimizations are possible if this regression proves to be problematic. Suggested-by:
David Hildenbrand <david@redhat.com> Reported-by:
Jiri Slaby <jirislaby@kernel.org> Closes: https://lore.kernel.org/all/dbdef34c-3a07-5951-e1ae-e9c6e3cdf51b@kernel.org/Reported-by:
Holger Hoffstätte <holger@applied-asynchrony.com> Closes: https://lore.kernel.org/all/b198d649-f4bf-b971-31d0-e8433ec2a34c@applied-asynchrony.com/Reported-by:
Jacob Young <jacobly.alt@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217624 Fixes: 0bff0aae ("x86/mm: try VMA lock-based page fault handling first") Cc: stable@vger.kernel.org Signed-off-by:
-
Suren Baghdasaryan authored
mmap_region adds a newly created VMA into VMA tree and might modify it afterwards before dropping the mmap_lock. This poses a problem for page faults handled under per-VMA locks because they don't take the mmap_lock and can stumble on this VMA while it's still being modified. Currently this does not pose a problem since post-addition modifications are done only for file-backed VMAs, which are not handled under per-VMA lock. However, once support for handling file-backed page faults with per-VMA locks is added, this will become a race. Fix this by write-locking the VMA before inserting it into the VMA tree. Other places where a new VMA is added into VMA tree do not modify it after the insertion, so do not need the same locking. Cc: stable@vger.kernel.org Signed-off-by:
-
Suren Baghdasaryan authored
With recent changes necessitating mmap_lock to be held for write while expanding a stack, per-VMA locks should follow the same rules and be write-locked to prevent page faults into the VMA being expanded. Add the necessary locking. Cc: stable@vger.kernel.org Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "A few late arriving patches that missed the initial pull request. It's mostly bug fixes (the dt-bindings is a fix for the initial pull)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: core: Remove unused function declaration scsi: target: docs: Remove tcm_mod_builder.py scsi: target: iblock: Quiet bool conversion warning with pr_preempt use scsi: dt-bindings: ufs: qcom: Fix ICE phandle scsi: core: Simplify scsi_cdl_check_cmd() scsi: isci: Fix comment typo scsi: smartpqi: Replace one-element arrays with flexible-array members scsi: target: tcmu: Replace strlcpy() with strscpy() scsi: ncr53c8xx: Replace strlcpy() with strscpy() scsi: lpfc: Fix lpfc_name struct packing
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull more i2c updates from Wolfram Sang: - xiic patch should have been in the original pull but slipped through - mpc patch fixes a build regression - nomadik cleanup * tag 'i2c-for-6.5-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mpc: Drop unused variable i2c: nomadik: Remove a useless call in the remove function i2c: xiic: Don't try to handle more interrupt events after error
-
