- 08 Jan, 2015 40 commits
-
-
Jan Kara authored
commit 4e202462 upstream. We didn't check length of rock ridge ER records before printing them. Thus corrupted isofs image can cause us to access and print some memory behind the buffer with obvious consequences. Reported-and-tested-by:
Carl Henrik Lunde <chlunde@ping.uio.no> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andy Lutomirski authored
commit 3fb2f423 upstream. It turns out that there's a lurking ABI issue. GCC, when compiling this in a 32-bit program: struct user_desc desc = { .entry_number = idx, .base_addr = base, .limit = 0xfffff, .seg_32bit = 1, .contents = 0, /* Data, grow-up */ .read_exec_only = 0, .limit_in_pages = 1, .seg_not_present = 0, .useable = 0, }; will leave .lm uninitialized. This means that anything in the kernel that reads user_desc.lm for 32-bit tasks is unreliable. Revert the .lm check in set_thread_area(). The value never did anything in the first place. Fixes: 0e58af4e ("x86/tls: Disallow unusual TLS segments") Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/d7875b60e28c512f6a6fc0baf5714d58e7eaadbb.1418856405.git.luto@amacapital.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Andy Lutomirski authored
commit 7ddc6a21 upstream. These functions can be executed on the int3 stack, so kprobes are dangerous. Tracing is probably a bad idea, too. Fixes: b645af2d ("x86_64, traps: Rework bad_iret") Signed-off-by:
-
Uwe Kleine-König authored
commit ab1e8537 upstream. Commit a095b1c7 ("ARM: mvebu: sort DT nodes by address") missed placing the system-controller in the correct order. Fixes: a095b1c7 ("ARM: mvebu: sort DT nodes by address") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/20141114204333.GS27002@pengutronix.deSigned-off-by:
Jason Cooper <jason@lakedaemon.net> Signed-off-by:
-
Thomas Petazzoni authored
commit b4607572 upstream. Back when audio was enabled, the muxing of some MPP pins was causing problems. However, since commit fea038ed ("ARM: mvebu: Add proper pin muxing on the Armada 370 DB board"), those problematic MPP pins have been assigned a proper muxing for the Ethernet interfaces. This proper muxing is now conflicting with the hog pins muxing that had been added as part of 249f3822 ("ARM: mvebu: add audio support to Armada 370 DB"). Therefore, this commit simply removes the hog pins muxing, which solves a warning a boot time due to the conflicting muxing requirements. Fixes: fea038ed ("ARM: mvebu: Add proper pin muxing on the Armada 370 DB board") Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by:
-
Thomas Petazzoni authored
commit e5535545 upstream. Enabling the hardware I/O coherency on Armada 370, Armada 375, Armada 38x and Armada XP requires a certain number of conditions: - On Armada 370, the cache policy must be set to write-allocate. - On Armada 375, 38x and XP, the cache policy must be set to write-allocate, the pages must be mapped with the shareable attribute, and the SMP bit must be set Currently, on Armada XP, when CONFIG_SMP is enabled, those conditions are met. However, when Armada XP is used in a !CONFIG_SMP kernel, none of these conditions are met. With Armada 370, the situation is worse: since the processor is single core, regardless of whether CONFIG_SMP or !CONFIG_SMP is used, the cache policy will be set to write-back by the kernel and not write-allocate. Since solving this problem turns out to be quite complicated, and we don't want to let users with a mainline kernel known to have infrequent but existing data corruptions, this commit proposes to simply disable hardware I/O coherency in situations where it is known not to work. And basically, the is_smp() function of the kernel tells us whether it is OK to enable hardware I/O coherency or not, so this commit slightly refactors the coherency_type() function to return COHERENCY_FABRIC_TYPE_NONE when is_smp() is false, or the appropriate type of the coherency fabric in the other case. Thanks to this, the I/O coherency fabric will no longer be used at all in !CONFIG_SMP configurations. It will continue to be used in CONFIG_SMP configurations on Armada XP, Armada 375 and Armada 38x (which are multiple cores processors), but will no longer be used on Armada 370 (which is a single core processor). In the process, it simplifies the implementation of the coherency_type() function, and adds a missing call to of_node_put(). Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1415871540-20302-3-git-send-email-thomas.petazzoni@free-electrons.comSigned-off-by:
-
Thomas Petazzoni authored
commit 30cdef97 upstream. The ll_add_cpu_to_smp_group(), ll_enable_coherency() and ll_disable_coherency() are used on Armada XP to control the coherency fabric. However, they make the assumption that the coherency fabric is always available, which is currently a correct assumption but will no longer be true with a followup commit that disables the usage of the coherency fabric when the conditions are not met to use it. Therefore, this commit modifies those functions so that they check the return value of ll_get_coherency_base(), and if the return value is 0, they simply return without configuring anything in the coherency fabric. The ll_get_coherency_base() function is also modified to properly return 0 when the function is called with the MMU disabled. In this case, it normally returns the physical address of the coherency fabric, but we now check if the virtual address is 0, and if that's case, return a physical address of 0 to indicate that the coherency fabric is not enabled. Signed-off-by:
-
Dmitry Osipenko authored
commit e4a68009 upstream. Commit d127e9c5 ("ARM: tegra: make tegra_resume can work with current and later chips") removed tegra_get_soc_id macro leaving used cpu register corrupted after branching to v7_invalidate_l1() and as result causing execution of unintended code on tegra20. Possibly it was expected that r6 would be SoC id func argument since common cpu reset handler is setting r6 before branching to tegra_resume(), but neither tegra20_lp1_reset() nor tegra30_lp1_reset() aren't setting r6 register before jumping to resume function. Fix it by re-adding macro. Fixes: d127e9c5 (ARM: tegra: make tegra_resume can work with current and later chips) Reviewed-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Thierry Reding authored
commit dc6057ec upstream. When creating a dumb buffer object using the DRM_IOCTL_MODE_CREATE_DUMB IOCTL, only the width, height, bpp and flags parameters are inputs. The caller is not guaranteed to zero out or set handle, pitch and size, so the driver must not treat these values as possible inputs. Fixes a bug where running the Weston compositor on Tegra DRM would cause an attempt to allocate a 3 GiB framebuffer to be allocated. Fixes: de2ba664 ("gpu: host1x: drm: Add memory manager and fb") Signed-off-by:
-
Zi Shen Lim authored
commit 51c9fbb1 upstream. Earlier implementation assumed last instruction is BPF_EXIT. Since this is no longer a restriction in eBPF, we remove this limitation. Per Alexei Starovoitov [1]: > classic BPF has a restriction that last insn is always BPF_RET. > eBPF doesn't have BPF_RET instruction and this restriction. > It has BPF_EXIT insn which can appear anywhere in the program > one or more times and it doesn't have to be last insn. [1] https://lkml.org/lkml/2014/11/27/2 Fixes: e54bcde3 ("arm64: eBPF JIT compiler") Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
Zi Shen Lim <zlim.lnx@gmail.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Catalin Marinas authored
commit 7d57511d upstream. Commit a469abd0 (ARM: elf: add new hwcap for identifying atomic ldrd/strd instructions) introduces HWCAP_ELF for 32-bit ARM applications. As LPAE is always present on arm64, report the corresponding compat HWCAP to user space. Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Mikulas Patocka authored
commit 17181fb7 upstream. As long as struct thin_c is in the list, anyone can grab a reference of it. Consequently, we must wait for the reference count to drop to zero *after* we remove the structure from the list, not before. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Joe Thornber authored
commit 2c43fd26 upstream. Discard bios and thin device deletion have the potential to release data blocks. If the thin-pool is in out-of-data-space mode, and blocks were released, transition the thin-pool back to full write mode. The correct time to do this is just after the thin-pool metadata commit. It cannot be done before the commit because the space maps will not allow immediate reuse of the data blocks in case there's a rollback following power failure. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
-
Joe Thornber authored
commit 45ec9bd0 upstream. When the pool was in PM_OUT_OF_SPACE mode its process_prepared_discard function pointer was incorrectly being set to process_prepared_discard_passdown rather than process_prepared_discard. This incorrect function pointer meant the discard was being passed down, but not effecting the mapping. As such any discard that was issued, in an attempt to reclaim blocks, would not successfully free data space. Reported-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
-
Dan Carpenter authored
commit c1c6156f upstream. This function isn't right and it causes a static checker warning: drivers/md/dm-thin.c:3016 maybe_resize_data_dev() error: potentially using uninitialized 'sb_data_size'. It should set "*count" and return zero on success the same as the sm_metadata_get_nr_blocks() function does earlier. Fixes: 3241b1d3 ('dm: add persistent data library') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
-
Joe Thornber authored
commit f824a2af upstream. We never bother caching a partial block that is at the back end of the origin device. No cell ever gets locked, but the calling code was assuming it was and trying to release it. Now the code only releases if the cell has been set to a non NULL value. Signed-off-by:
-
Joe Thornber authored
commit 1e32134a upstream. If the incoming bio is a WRITE and completely covers a block then we don't bother to do any copying for a promotion operation. Once this is done the cache block and origin block will be different, so we need to set it to 'dirty'. Signed-off-by:
-
Joe Thornber authored
commit f29a3147 upstream. Overwrite causes the cache block and origin blocks to diverge, which is only allowed in writeback mode. Signed-off-by:
-
Milan Broz authored
commit 1a71d6ff upstream. Use memzero_explicit to cleanup sensitive data allocated on stack to prevent the compiler from optimizing and removing memset() calls. Signed-off-by:
Milan Broz <gmazyland@gmail.com> Signed-off-by:
-
Darrick J. Wong authored
commit 445559cd upstream. When dm-bufio sets out to use the bio built into a struct dm_buffer to issue an IO, it needs to call bio_reset after it's done with the bio so that we can free things attached to the bio such as the integrity payload. Therefore, inject our own endio callback to take care of the bio_reset after calling submit_io's end_io callback. Test case: 1. modprobe scsi_debug delay=0 dif=1 dix=199 ato=1 dev_size_mb=300 2. Set up a dm-bufio client, e.g. dm-verity, on the scsi_debug device 3. Repeatedly read metadata and watch kmalloc-192 leak! Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Mikulas Patocka authored
commit 08d4f772 upstream. This patch fixes kmemcheck warning in switch_names. The function switch_names swaps inline names of two dentries. It swaps full arrays d_iname, no matter how many bytes are really used by the strings. Reading data beyond string ends results in kmemcheck warning. We fix the bug by marking both arrays as fully initialized. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Peng Tao authored
commit 4bd5a980 upstream. nfs4_layoutget_release() drops layout hdr refcnt. Grab the refcnt early so that it is safe to call .release in case nfs4_alloc_pages fails. Signed-off-by:
Peng Tao <tao.peng@primarydata.com> Fixes: a47970ff ("NFSv4.1: Hold reference to layout hdr in layoutget") Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Jan Kara authored
commit 9234f319 upstream. f2fs_write_begin() doesn't initialize the 'dn' variable if the inode has inline data. However it uses its contents to decide whether it should just zero out the page or load data to it. Thus if we are unlucky we can zero out page contents instead of loading inline data into a page. CC: Changman Lee <cm224.lee@samsung.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Jan Kara authored
commit 9bd27ae4 upstream. If user specifies too low end sector for trimming, f2fs_trim_fs() will use uninitialized value as a number of trimmed blocks and returns it to userspace. Initialize number of trimmed blocks early to avoid the problem. Coverity-id: 1248809 Signed-off-by:
-
Hannes Reinecke authored
commit b6c92b7e upstream. The .eh_abort_handler needs to return SUCCESS, FAILED, or FAST_IO_FAIL. So fixup all callers to adhere to this requirement. Reviewed-by:
Robert Elliott <elliott@hp.com> Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Markus Pargmann authored
commit fe08be3e upstream. The code reads the default voltage selector from its register. If the bootloader disables the regulator, the default voltage selector will be 0 which results in faulty behaviour of this regulator driver. This patch sets a default voltage selector for vddpu if it is not set in the register. Signed-off-by:
Markus Pargmann <mpa@pengutronix.de> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Sumit.Saxena@avagotech.com authored
commit 6e755ddc upstream. This patch addresses few endianness related bug fixes. Signed-off-by:
Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by:
Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
-
Sumit.Saxena@avagotech.com authored
commit 170c2387 upstream. Corrected wait_event() call which was waiting for wrong completion status (0xFF). Signed-off-by:
-
Peter Guo authored
commit 6380ea09 upstream. Fix Dell E5440 when reboot Linux, can't find o2micro sd host chip issue. Fixes: 01acf691 (mmc: sdhci-pci: add support of O2Micro/BayHubTech SD hosts) Signed-off-by:
Peter Guo <peter.guo@bayhubtech.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Baruch Siach authored
commit 0031a98a upstream. Make force_ro consistent with other sysfs entries. Fixes: 371a689f ('mmc: MMC boot partitions support') Cc: Andrei Warkentin <andrey.warkentin@gmail.com> Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
-
Ulf Hansson authored
commit 903101a8 upstream. The commit, mmc: omap: clarify DDR timing mode between SD-UHS and eMMC, switched omap_hsmmc to support MMC DDR mode instead of UHS DDR50 mode. Add UHS DDR50 mode again and this time let's also keep the MMC DDR mode. Fixes: 5438ad95 (mmc: omap: clarify DDR timing mode between SD-UHS and eMMC) Reported-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
James Hogan authored
commit 66dfd101 upstream. Commit f1d2736c (mmc: dw_mmc: control card read threshold) added dw_mci_ctrl_rd_thld() with an unconditional write to the CDTHRCTL register at offset 0x100. However before version 240a, the FIFO region started at 0x100, so the write messes with the FIFO and completely breaks the driver. If the version id < 240A, return early from dw_mci_ctl_rd_thld() so as not to hit this problem. Fixes: f1d2736c (mmc: dw_mmc: control card read threshold) Signed-off-by:
James Hogan <james.hogan@imgtec.com> Acked-by:
Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by:
-
Dmitry Eremin-Solenikov authored
commit 1a5fb99d upstream. Some boards with TC6393XB chip require full state restore during system resume thanks to chip's VCC being cut off during suspend (Sharp SL-6000 tosa is one of them). Failing to do so would result in ohci Oops on resume due to internal memory contentes being changed. Fail ohci suspend on tc6393xb is full state restore is required. Recommended workaround is to unbind tmio-ohci driver before suspend and rebind it after resume. Signed-off-by:
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Tony Lindgren authored
commit 1b9b46d0 upstream. Commit e7cd1d1e ("mfd: twl4030-power: Add generic reset configuration") accidentally removed the compatible flag for "ti,twl4030-power" that should be there as documented in the binding. If "ti,twl4030-power" only the poweroff configuration is done by the driver. Fixes: e7cd1d1e ("mfd: twl4030-power: Add generic reset configuration") Reported-by:
"Dr. H. Nikolaus Schaller" <hns@goldelico.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Sonny Rao authored
commit 0b46b8a7 upstream. This is a bug fix for using physical arch timers when the arch_timer_use_virtual boolean is false. It restores the arch_counter_get_cntpct() function after removal in 0d651e4e "clocksource: arch_timer: use virtual counters" We need this on certain ARMv7 systems which are architected like this: * The firmware doesn't know and doesn't care about hypervisor mode and we don't want to add the complexity of hypervisor there. * The firmware isn't involved in SMP bringup or resume. * The ARCH timer come up with an uninitialized offset between the virtual and physical counters. Each core gets a different random offset. * The device boots in "Secure SVC" mode. * Nothing has touched the reset value of CNTHCTL.PL1PCEN or CNTHCTL.PL1PCTEN (both default to 1 at reset) One example of such as system is RK3288 where it is much simpler to use the physical counter since there's nobody managing the offset and each time a core goes down and comes back up it will get reinitialized to some other random value. Fixes: 0d651e4e ("clocksource: arch_timer: use virtual counters") Signed-off-by:
Sonny Rao <sonnyrao@chromium.org> Acked-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Hante Meuleman authored
commit 333c2aa0 upstream. Reviewed-by:
Arend Van Spriel <arend@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by:
Hante Meuleman <meuleman@broadcom.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Andy Lutomirski authored
commit 29fa6825 upstream. paravirt_enabled has the following effects: - Disables the F00F bug workaround warning. There is no F00F bug workaround any more because Linux's standard IDT handling already works around the F00F bug, but the warning still exists. This is only cosmetic, and, in any event, there is no such thing as KVM on a CPU with the F00F bug. - Disables 32-bit APM BIOS detection. On a KVM paravirt system, there should be no APM BIOS anyway. - Disables tboot. I think that the tboot code should check the CPUID hypervisor bit directly if it matters. - paravirt_enabled disables espfix32. espfix32 should *not* be disabled under KVM paravirt. The last point is the purpose of this patch. It fixes a leak of the high 16 bits of the kernel stack address on 32-bit KVM paravirt guests. Fixes CVE-2014-8134. Suggested-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Andy Lutomirski authored
commit f647d7c1 upstream. Otherwise, if buggy user code points DS or ES into the TLS array, they would be corrupted after a context switch. This also significantly improves the comments and documents some gotchas in the code. Before this patch, the both tests below failed. With this patch, the es test passes, although the gsbase test still fails. ----- begin es test ----- /* * Copyright (c) 2014 Andy Lutomirski * GPL v2 */ static unsigned short GDT3(int idx) { return (idx << 3) | 3; } static int create_tls(int idx, unsigned int base) { struct user_desc desc = { .entry_number = idx, .base_addr = base, .limit = 0xfffff, .seg_32bit = 1, .contents = 0, /* Data, grow-up */ .read_exec_only = 0, .limit_in_pages = 1, .seg_not_present = 0, .useable = 0, }; if (syscall(SYS_set_thread_area, &desc) != 0) err(1, "set_thread_area"); return desc.entry_number; } int main() { int idx = create_tls(-1, 0); printf("Allocated GDT index %d\n", idx); unsigned short orig_es; asm volatile ("mov %%es,%0" : "=rm" (orig_es)); int errors = 0; int total = 1000; for (int i = 0; i < total; i++) { asm volatile ("mov %0,%%es" : : "rm" (GDT3(idx))); usleep(100); unsigned short es; asm volatile ("mov %%es,%0" : "=rm" (es)); asm volatile ("mov %0,%%es" : : "rm" (orig_es)); if (es != GDT3(idx)) { if (errors == 0) printf("[FAIL]\tES changed from 0x%hx to 0x%hx\n", GDT3(idx), es); errors++; } } if (errors) { printf("[FAIL]\tES was corrupted %d/%d times\n", errors, total); return 1; } else { printf("[OK]\tES was preserved\n"); return 0; } } ----- end es test ----- ----- begin gsbase test ----- /* * gsbase.c, a gsbase test * Copyright (c) 2014 Andy Lutomirski * GPL v2 */ static unsigned char *testptr, *testptr2; static unsigned char read_gs_testvals(void) { unsigned char ret; asm volatile ("movb %%gs:%1, %0" : "=r" (ret) : "m" (*testptr)); return ret; } int main() { int errors = 0; testptr = mmap((void *)0x200000000UL, 1, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_FIXED | MAP_ANONYMOUS, -1, 0); if (testptr == MAP_FAILED) err(1, "mmap"); testptr2 = mmap((void *)0x300000000UL, 1, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_FIXED | MAP_ANONYMOUS, -1, 0); if (testptr2 == MAP_FAILED) err(1, "mmap"); *testptr = 0; *testptr2 = 1; if (syscall(SYS_arch_prctl, ARCH_SET_GS, (unsigned long)testptr2 - (unsigned long)testptr) != 0) err(1, "ARCH_SET_GS"); usleep(100); if (read_gs_testvals() == 1) { printf("[OK]\tARCH_SET_GS worked\n"); } else { printf("[FAIL]\tARCH_SET_GS failed\n"); errors++; } asm volatile ("mov %0,%%gs" : : "r" (0)); if (read_gs_testvals() == 0) { printf("[OK]\tWriting 0 to gs worked\n"); } else { printf("[FAIL]\tWriting 0 to gs failed\n"); errors++; } usleep(100); if (read_gs_testvals() == 0) { printf("[OK]\tgsbase is still zero\n"); } else { printf("[FAIL]\tgsbase was corrupted\n"); errors++; } return errors == 0 ? 0 : 1; } ----- end gsbase test ----- Signed-off-by:
-
Andy Lutomirski authored
commit 0e58af4e upstream. Users have no business installing custom code segments into the GDT, and segments that are not present but are otherwise valid are a historical source of interesting attacks. For completeness, block attempts to set the L bit. (Prior to this patch, the L bit would have been silently dropped.) This is an ABI break. I've checked glibc, musl, and Wine, and none of them look like they'll have any trouble. Note to stable maintainers: this is a hardening patch that fixes no known bugs. Given the possibility of ABI issues, this probably shouldn't be backported quickly. Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Andy Lutomirski authored
commit 41bdc785 upstream. Installing a 16-bit RW data segment into the GDT defeats espfix. AFAICT this will not affect glibc, Wine, or dosemu at all. Signed-off-by:
-
