- 25 Mar, 2013 37 commits
-
-
Johan Hovold authored
Remove bogus (and unnecessary) test for serial->dev being NULL in close. The device is never cleared, and close is never called after a completed disconnect anyway. Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
Remove bogus (and unnecessary) test for serial->dev being NULL in close. The device is never cleared, and close is never called after a completed disconnect anyway. Simplify urb killing, and remove some related debug and dead code while at it. Signed-off-by:
-
Johan Hovold authored
Remove bogus (and unnecessary) test for serial->dev being NULL in close. The device is never cleared, and close is never called after a completed disconnect anyway. Signed-off-by:
-
Johan Hovold authored
Remove bogus (and unnecessary) test for serial->dev being NULL in dtr_rts. The device is never cleared, and disconnect is handled for dtr_rts in usb-serial core anyway. Signed-off-by:
-
Johan Hovold authored
Remove bogus (and unnecessary) test for serial->dev being NULL in close. The device is never cleared, and close is never called after a completed disconnect anyway. Remove some out-commented bogus code while at it. Signed-off-by:
-
Johan Hovold authored
Remove bogus (and unnecessary) test for serial->dev being NULL in close. The device is never cleared, and close is never called after a completed disconnect anyway. Signed-off-by:
-
Johan Hovold authored
Remove bogus (and unnecessary) test for serial->dev being NULL in close. The device is never cleared, and close is never called after a completed disconnect anyway. Signed-off-by:
-
Johan Hovold authored
Remove bogus (and unnecessary) test for serial->dev being NULL in close. The device is never cleared, and close is never called after a completed disconnect anyway. Signed-off-by:
-
Johan Hovold authored
Remove bogus (and unnecessary) test for serial->dev being NULL in close. The device is never cleared, and close is never called after a completed disconnect anyway. Signed-off-by:
-
Johan Hovold authored
Remove redundant port number from debug output (already printed as part of device name). Signed-off-by:
-
Johan Hovold authored
Failed allocations already get an OOM message and a stack dump. Signed-off-by:
-
Johan Hovold authored
Remove redundant port number from debug output (already printed as part of device name). Signed-off-by:
-
Johan Hovold authored
Remove redundant comments and fix some minor coding style issues. Signed-off-by:
-
Johan Hovold authored
Rename the tty-port callbacks using a common prefix to more clearly separate them from the tty and usb driver callbacks. Rename serial_down to serial_port_shutdown to match the callback name. Signed-off-by:
-
Johan Hovold authored
Pass usb-serial port rather than usb device to set_control_lines, and make sure port device is used for all port related debugging. Signed-off-by:
-
Johan Hovold authored
Use interface rather than usb-serial device for debugging interface related operations. This gives more descriptive messages, such as [ 905.669436] pl2303 1-4.1:1.0: 0x40:0x1:0x8:0x0 0 rather than [ 341.943535] usb 1-4.1: 0x40:0x1:0x8:0x0 0 Signed-off-by:
-
Johan Hovold authored
Remove kill of interrupt-in urb on close as it has never been submitted. Signed-off-by:
-
Johan Hovold authored
Remove kill of interrupt-in urb on close as it has never been submitted. Signed-off-by:
-
Johan Hovold authored
Remove the port data refcounting and release the private data explicitly at port remove. The port data refcounting was used to make sure the port data was not freed until the last tty reference was closed. Since moving over to tty ports, the underlying assumptions are no longer valid as close is now called as part of tty port shutdown, which can occur before the final tty reference is dropped on device disconnect. This means that the private port data refcounting is now completely useless, as the last reference will always be dropped on port_remove. Signed-off-by:
-
Alan Stern authored
This patch (as1669) removes the check_unlinks_later flag in ehci-hcd's unlink_empty_async(). It wasn't being used for anything and should have been removed in an earlier patch, but I forgot about it. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Alan Stern authored
This patch (as1665) changes the way ehci-hcd's end_unlink_async() routine works in order to avoid recursive execution and to be more efficient: Now when an IAA cycle ends, a new one gets started up right away (if it is needed) instead of waiting until the just-unlinked QH has been processed. The async_iaa list is renamed to async_idle, which better expresses its new purpose: It is now the list of QHs which are now completely idle and are waiting to be processed by end_unlink_async(). A new flag is added to track whether an IAA cycle is in progress, because the list formerly known as async_iaa no longer stores the QHs waiting for the IAA to finish. The decision about how many QHs to process when an IAA cycle ends is now made at the end of the cycle, when we know the current state of the hardware, rather than at the beginning. This means a bunch of logic got moved from start_iaa_cycle() to end_unlink_async(). Signed-off-by:
-
Alan Stern authored
This patch (as1664) converts ehci-hcd's async_unlink, async_iaa, and intr_unlink from singly-linked lists to standard doubly-linked list_heads. Originally it didn't seem necessary to use list_heads, because items are always added to and removed from these lists in FIFO order. But now with more list processing going on, it's easier to use the standard routines than continue with a roll-your-own approach. I don't know if the code ends up being notably shorter, but the patterns will be more familiar to any kernel hacker. Signed-off-by:
-
Alan Stern authored
This patch (as1668) consolidates two nearly identical code paths in ehci_urb_dequeue(). The test for !qh can be removed because it will never succeed; the fact that usb_hcd_check_unlink_urb() returned 0 means that urb must be queued and therefore urb->hcpriv must point to a QH. Signed-off-by:
-
Alan Stern authored
This patch (as1662) does some more QH-related cleanup in ehci-hcd. The qh->needs_rescan flag is currently used for two different purposes; the patch replaces it with two separate flags for greater clarity: qh->dequeue_during_giveback indicates that a completion handler dequeued an URB (implying that a rescan is needed), and qh->exception indicates that the QH is in an exceptional state requiring an unlink (either it encountered an I/O error or an unlink was requested). The new flags get set where the dequeue, exception, or unlink request occurred, rather than where the unlink is started. This is so that in the future, if we need to, we will be able to tell apart unlinks that truly were required from those that were carried out merely because the QH wasn't being used. Signed-off-by:
-
Alan Stern authored
This patch (as1658) cleans up the usage of qh_completions() in ehci-hcd. Currently the function's return value indicates whether any URBs were given back; the idea was that the caller can scan the QH over again to handle any URBs that were dequeued by a completion handler. This is not necessary; when qh_completions() is ready to give back dequeued URBs, it does its own rescanning. Therefore the new return value will be a flag indicating whether the caller needs to unlink the QH. This is more convenient than forcing the caller to check qh->needs_rescan, and it makes a lot more sense -- why should "needs_rescan" imply that an unlink is needed? The callers are also changed to remove the unneeded rescans. Lastly, the check for whether qh->qtd_list is non-empty is removed from the start of qh_completions(). Two of the callers have to make this test anyway, so the same test can simply be added to the other two callers. Signed-off-by:
-
Alan Stern authored
This patch (as1638) makes several changes to the ehci-hcd driver, all related to the qh_refresh() function. This function must be called whenever an idle QH gets linked back into either the async or the periodic schedule. Change a BUG_ON() in the qh_update routine to a WARN_ON(). Since this code runs in atomic context, a BUG_ON() would immediately freeze the whole system. Remove two unneeded calls to qh_refresh(), one when a QH is initialized and one when a QH becomes idle. Adjust the adjacent comments accordingly. Move the qh_refresh() and qh_link_periodic() calls for new interrupt URBs to after the new TDs have been added. As a result of the previous two changes, qh_refresh() is never called when the qtd_list is empty. The corresponding check in qh_refresh() can be removed, along with an indentation level. These changes should not cause any alteration of behavior. Signed-off-by:
-
Du Xing authored
In skel_read,the reader blocked in wait_for_completion before submit bulk in urb. Using processed_urb is for retaining the completion in the case that previous interruptible wait in skel_read was interrupted and complete before next skel_read. Replacing completion with waitqueue can avoid working around the counting nature of completions and fix the bug. Signed-off-by: Du Xing duxing2007@gmail.com Signed-off-by: -
Bjørn Mork authored
Userspace applications need to know the maximum supported message size. The cdc-wdm driver translates between a character device stream and a message based protocol. Each message is transported as a usb control message with no further encapsulation or syncronization. Each read or write on the character device should translate to exactly one usb control message to ensure that message boundaries are kept intact. That means that the userspace application must know the maximum message size supported by the device and driver, making this size a vital part of the cdc-wdm character device API. CDC WDM and CDC MBIM functions export the maximum supported message size through CDC functional descriptors. The cdc-wdm and cdc_mbim drivers will parse these descriptors and use the value chosen by the device. The only current way for a userspace application to retrive the value is by duplicating the descriptor parsing. This is an unnecessary complex task, and application writers are likely to postpone it, using a fixed value and adding a "todo" item. QMI functions have no way to tell the host what message size they support. The qmi_wwan driver use a fixed value based on protocol recommendations and observed device behaviour. Userspace applications must know and hard code the same value. This scheme will break if we ever encounter a QMI device needing a device specific message size quirk. We are currently unable to support such a device because using a non default size would break the implicit userspace API. The message size is currently a hidden attribute of the cdc-wdm userspace API. Retrieving it is unnecessarily complex, increasing the possibility of drivers and applications using different limits. The resulting errors are hard to debug, and can only be replicated on identical hardware. Exporting the maximum message size from the driver simplifies the task for the userspace application, and creates a unified information source independent of device and function class. It also serves to document that the message size is part of the cdc-wdm userspace API. This proposed API extension has been presented for the authors of userspace applications and libraries using the current API: libmbim, libqmi, uqmi, oFono and ModemManager. The replies were: Aleksander Morgado: "We do really need max message size for MBIM; and as you say, it may be good to have the max message size info also for QMI, so the new ioctl seems a good addition. So +1 from my side, for what it's worth." Dan Williams: "Yeah, +1 here. I'd prefer the sysfs file, but the fact that that doesn't work for fd passing pretty much kills it." No negative replies are so far received. Cc: Aleksander Morgado <aleksander@lanedo.com> Cc: Dan Williams <dcbw@redhat.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Acked-by:
Oliver Neukum <oliver@neukum.org> Signed-off-by:
-
David Linares authored
Return an error if hub->descriptor->bNbrPorts==0. Without this additional check, we can end up doing a "hub->ports = kzalloc(0, GFP_KERNEL)". This hub->ports pointer will therefore be non-NULL and will be used. Example of dmesg: INIT: usb 1-1: New USB device found, idVendor=0424, idProduct=2512 usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 1-1:1.0: USB hub found version 2.86 bootinghub 1-1:1.0: 0 ports detected Unable to handle kernel NULL pointer dereference at virtual address 00000010 Signed-off-by:
David Linares <dlinares.linux@gmail.com> Signed-off-by:
-
Ming Lei authored
If suspend callback fails in system sleep context, usb core will ignore the failure and let system sleep go ahead further, so this patch doesn't recover device under this situation. Also add comments on this case. Acked-by:
David S. Miller <davem@davemloft.net> Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by:
Ming Lei <ming.lei@canonical.com> Signed-off-by:
-
Ming Lei authored
If suspend callback fails in system sleep context, usb core will ignore the failure and let system sleep go ahead further, so this patch doesn't recover device under this situation. Also add comments on the case. Acked-by:
-
Ming Lei authored
If suspend callback fails in system sleep context, usb core will ignore the failure and let system sleep go ahead further, so this patch comments on the case and requires that both usbnet_suspend() and subdriver->suspend() MUST return 0 in system sleep context. Acked-by:
-
Ming Lei authored
If suspend callback fails in system sleep context, usb core will ignore the failure and let system sleep go ahead further, so this patch comments on the case and requires that both usbnet_suspend() and subdriver->suspend() MUST return 0 in system sleep context. Acked-by:
-
Ming Lei authored
If suspend callback fails in system sleep context, usb core will ignore the failure and let the system sleep go ahead further, so this patch doesn't recover device under this situation, otherwise may cause resume() confused. Acked-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Ming Lei authored
If suspend callback fails in system sleep context, usb core will ignore the failure and let system sleep go ahead further, so this patch comments on the case and requires that serial->type->suspend() MUST return 0 in system sleep context. Acked-by:
-
Ming Lei authored
This patch adds comments on interface driver suspend callback to emphasize that the failure return value is ignored by USB core in system sleep context, so do not try to recover device for this case and let resume/reset_resume callback handle the suspend failure if needed. Also kerneldoc for usb_suspend_both() is updated with the fact. Acked-by:
-
Greg Kroah-Hartman authored
This picks up the fixes we had for USB in 3.9-rc4 Signed-off-by:
-
- 23 Mar, 2013 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target fixes from Nicholas Bellinger: "These are mostly minor fixes this time around. The iscsi-target CHAP big-endian bugfix and bump FD_MAX_SECTORS=2048 default patch to allow 1MB sized I/Os for FILEIO backends on >= v3.5 code are both CC'ed to stable. Also, there is a persistent reservations regression that has recently been reported for >= v3.8.x code, that is currently being tracked down for v3.9." * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target/pscsi: Reject cross page boundary case in pscsi_map_sg target/file: Bump FD_MAX_SECTORS to 2048 to handle 1M sized I/Os tcm_vhost: Flush vhost_work in vhost_scsi_flush() tcm_vhost: Add missed lock in vhost_scsi_clear_endpoint() target: fix possible memory leak in core_tpg_register() target/iscsi: Fix mutual CHAP auth on big-endian arches target_core_sbc: use noop for SYNCHRONIZE_CACHE
-
git://neil.brown.name/mdLinus Torvalds authored
Pull md fixes from NeilBrown: "A few bugfixes for md - recent regressions in raid5 - recent regressions in dmraid - a few instances of CONFIG_MULTICORE_RAID456 linger Several tagged for -stable" * tag 'md-3.9-fixes' of git://neil.brown.name/md: md: remove CONFIG_MULTICORE_RAID456 entirely md/raid5: ensure sync and DISCARD don't happen at the same time. MD: Prevent sysfs operations on uninitialized kobjects MD RAID5: Avoid accessing gendisk or queue structs when not available md/raid5: schedule_construction should abort if nothing to do.
-
