- 18 Jul, 2023 40 commits
-
-
Nicholas Kazlauskas authored
[Why & How] Port of a change that went into DCN314 to keep the PHY enabled when we have a connected and active DP display. The PHY can hang if PHY refclk is disabled inadvertently. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Josip Pavic <josip.pavic@amd.com> Acked-by:
Alan Liu <haoping.liu@amd.com> Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Daniel Miess authored
[Why] In dcn314 DML the destination pipe vtotal was being set to the crtc adjustment vtotal_min value even in cases where that value is 0. [How] Only set vtotal to the crtc adjustment vtotal_min value in cases where the value is non-zero. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Daniel Miess <daniel.miess@amd.com> Tested-by:
-
George Shen authored
[Why] There certain cases where the timing BW is dependent on the type of link encoding in use. Thus to calculate the correct BW required for a given timing, the link encoding should be added as a parameter. Reviewed-by:
Wenjing Liu <wenjing.liu@amd.com> Acked-by:
George Shen <george.shen@amd.com> Tested-by:
-
George Shen authored
[Why] Current BW calculations do not account for the additional padding added for uncompressed pixel-to-symbol packing. This results in X.Y being too low for 128b/132b SST streams in certain scenarios. If X.Y is too low, end user can observe image corruption. [How] Add function to calculate stream overhead to timing BW calculation for 128b/132b SST cases. Reviewed-by:
-
Meera Patel authored
This commit initializes uninitialized variables. For some compilers uninitialized variable warnings are treated as Error. Reviewed-by:
Meera Patel <meera.patel@amd.com> Tested-by:
-
Cruise Hung authored
[Why & How] To query the bits and print them out for debug purposes. Reviewed-by:
Cruise Hung <cruise.hung@amd.com> Tested-by:
-
Aric Cyr authored
This version brings along following fixes: - Setup stream encoder before link enable for TMDS - Use is_dig_enable function instead of dcn10 hardcode - Re-add aux intercept disable delay generically for 2+ LTTPRs - Add polling method to handle MST reply packet - Remove unused function - Improve the include of header file - Add missing static - Hardcode vco_freq for dcn316 - Reduce stack size - Skip enabling DMCUB when using emulation - Check TG is non-null before checking if enabled - Update scaler recout data for visual confirm - Skip querying caps when DMCUB emulation is in use Acked-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
-
Zhikai Zhai authored
[WHY] All of pipes will be used when the MPC split enable on the dcn which just has 2 pipes. Then MPO enter will trigger the minimal transition which need programe dcn from 2 pipes MPC split to 2 pipes MPO. This action will cause lag if happen frequently. [HOW] Disable the MPC split for the platform which dcn resource is limited Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Alvin Lee <alvin.lee2@amd.com> Acked-by:
Zhikai Zhai <zhikai.zhai@amd.com> Tested-by:
-
George Shen authored
[Why] Updating downspread factor to 0.3% to add additional margin to account for potential link rate deviations (up to 300ppm as per the DP spec). Reviewed-by:
-
Alan Liu authored
[Why] When 2 threads are doing commit_tail parallelly, one thread could commit new streams to dc state but another thread remove it from dc right away. [How] If we don't have new dm state change from commit_check, then we should not call dc_commit_streams() in commit_tail. A new function amdgpu_dm_commit_streams() is introduced to refator dc_commit_stream() adjacent code and fix this issue. Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Acked-by:
-
Samson Tam authored
[Why] Want to further constrain these refresh rate conditions for SubVP: - SubVP + SubVP: either both <= 120Hz or both between 120-165Hz - SubVP + DRR: SubVP <= 120Hz - SubVP + VBlank: SubVP <= 120Hz [How] Add constraints in subvp_subvp_admissable(), dcn32_subvp_drr_admissable() and dcn32_subvp_vblank_admissable() Reviewed-by:
Samson Tam <samson.tam@amd.com> Tested-by:
-
Zhikai Zhai authored
[WHY] We return false by default when link training fail at link loss. It will cause we get a fail verified link caps directly. [HOW] Record the highest verified link caps. Use the recorded value as the verified link caps if it is not successful in the last attempt to avoid to use the lowest link setting. Reviewed-by:
-
Daniel Miess authored
[Why] When RCO is enabled for symclk32_le we get failures during DP2 link traing compliance tests. [How] Break out symclk32_le RCO into a separate function that is called for hpo when link is enabled/disabled. Reviewed-by:
-
Nicholas Susanto authored
[Why] Need to save the cached backlight level so that display lights up using appropriate brightness level instead of the default brightness when waking up from s0i3. [How] Adding a backlight level cache in link structure. Also instead on calling set_default_brightness_aux, check if cached values exists. Reviewed-by:
Nicholas Susanto <nicholas.susanto@amd.com> Tested-by:
-
Daniel Miess authored
[Why & How] Re-enable all RCO options now that all known issues with RCO have been addressed Reviewed-by:
-
Alvin Lee authored
[Description] Since SubVP high refresh is now enabled, we must fallback to SW cursor under if we're in a SubVP high refresh config Reviewed-by:
-
Nicholas Kazlauskas authored
[Why] Workaround to avoid accessing DMCUB state too early if the emulator is in use - we don't support any of the features the caps are querying with emulation anyway. [How] Guard the query if emulation is in use. Reviewed-by:
Charlene Liu <charlene.liu@amd.com> Acked-by:
-
Leo Ma authored
[Why] Visual confirm color is not as expected for Autoa Color Management feature test. [How] Calculate scaler recout data when visual confirm enabled to update the visual confirm bar on the display. Reviewed-by:
Leo Ma <hanghong.ma@amd.com> Tested-by:
-
Taimur Hassan authored
[Why & How] If there is no TG allocation we can dereference a NULL pointer when checking if the TG is enabled. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Taimur Hassan <syed.hassan@amd.com> Tested-by:
-
Taimur Hassan authored
[Why & How] Shouldn't be touching path for HW DMCUB when emulating. Reviewed-by:
-
Rodrigo Siqueira authored
Reduce stack size pointed by clang: amdgpu_dm/amdgpu_dm.c:8655:13: error: stack frame size (1048) exceeds limit (1024) in 'amdgpu_dm_atomic_commit_tail' [-Werror,-Wframe-larger-than] Reviewed-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by:
-
Alan Liu authored
There is no need to calculate the VCO frequency. In our internal branch we've hard-coded this for a while, so it's well-tested. This also allows us to remove the now unused code for calculating the VCO frequency. Reviewed-by:
-
Rodrigo Siqueira authored
After enable DRM_AMDGPU_WERROR, clang highlight multiple functions that need to have `static`, and this commit address those issues and also improve the indents. Reviewed-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Acked-by:
-
Rodrigo Siqueira authored
The get_engine_type is never used in the code, for this reason, this commit drops this function. Reviewed-by:
-
Rodrigo Siqueira authored
This commit improves the include of some header files to make them align with other includes. Reviewed-by:
-
Wayne Lin authored
[Why] Specific TBT4 dock doesn't send out short HPD to notify source that IRQ event DOWN_REP_MSG_RDY is set. Which violates the spec and cause source can't send out streams to mst sinks. [How] To cover this misbehavior, add an additional polling method to detect DOWN_REP_MSG_RDY is set. HPD driven handling method is still kept. Just hook up our handler to drm mgr->cbs->poll_hpd_irq(). Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Jerry Zuo <jerry.zuo@amd.com> Acked-by:
Wayne Lin <wayne.lin@amd.com> Tested-by:
-
Michael Strauss authored
[WHY] Issue not display generic, required for multiple 2+ LTTPR link configurations. [HOW] Revert monitor patch change and remove delay for single LTTPR case Reviewed-by:
Michael Strauss <michael.strauss@amd.com> Tested-by:
-
Nicholas Kazlauskas authored
[Why] This can differ depending on ASIC and we can end up skipping all transmitter control if we're relying on the wrong bit as a shortcut for whether link is on/off. [How] The ASIC table itself provides the correct DIG check, use that instead of the dcn10 hardcode. Reviewed-by:
-
JinZe Xu authored
[Why] HDMI spec requires TMDS clock to be not more than 340MHz. Stream encoder ensure this requirement but driver enable stream encoder later than PHY. So PHY will output full speed TMDS clock first. [How] Enable stream encoder first in TMDS case. Reviewed-by:
JinZe Xu <jinze.xu@amd.com> Tested-by:
-
Shashank Sharma authored
This patch: - creates a new file for doorbell management. - moves doorbell code from amdgpu_device.c to this file. V2: - remove doc from function declaration (Christian) - remove 'device' from function names to make it consistent (Alex) - add SPDX license identifier (Luben) V3: - change license to MIT license(Christian) Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian Koenig <christian.koenig@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Shashank Sharma <shashank.sharma@amd.com> Signed-off-by:
-
Stylon Wang authored
[Why & How] It's useful to be able to enable DPIA trace with dcdebugmask option, especially to debug DPIA issues involved in transition of system power states. This patch adds an option to amdgpu.dcdebugmask to be picked up by amdgpu DM to enable DPIA trace. Signed-off-by:
Stylon Wang <stylon.wang@amd.com> Reviewed-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
-
Candice Li authored
Allow the initramfs generator to automatically include psp_13_0_6_ta firmware to initramfs. Signed-off-by:
Candice Li <candice.li@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Stanley.Yang authored
Disable RAS feature by default for aqua vanjaram on APU platform. Changed from V1: Splite Disable RAS by default on APU platform into a separated patch. Changed from V2: Avoid to modify global variable amdgpu_ras_enable. Signed-off-by:
Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by:
Tao Zhou <tao.zhou1@amd.com> Signed-off-by:
-
Stanley.Yang authored
Enable RAS for aqua vanjaram. Changed from V1: Split the change in amdgpu_ras_asic_supported into a separated patch. Changed from V2: Avoid to modify global variable amdgpu_ras_enable. Signed-off-by:
-
Srinivasan Shanmugam authored
If the function 'gmc_v8_0_ or gmc_v7_0_init_microcode()' fails, the driver will just fail to load, hence return -EINVAL rather having BUG(), fixes WARNING: Do not crash the kernel unless it is absolutely unavoidable--use WARN_ON_ONCE() plus recovery code (if feasible) instead of BUG() or variants Fixes: 2f77b593 ("drm/amdgpu: Fix error & warnings in gmc_v8_0.c") Fixes: 0cfc1d68 ("drm/amdgpu: Fix errors & warnings in gmc_ v6_0, v7_0.c") Suggested-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
-
Srinivasan Shanmugam authored
Fix the following warnings reported by checkpatch: WARNING: Block comments use a trailing */ on a separate line WARNING: Prefer using '"%s...", __func__' to using 'execute_synaptics_rc_command', this function's name, in a string WARNING: Prefer using '"%s...", __func__' to using 'apply_synaptics_fifo_reset_wa', this function's name, in a string WARNING: braces {} are not necessary for single statement blocks Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: -
Srinivasan Shanmugam authored
Conform to Linux kernel coding style. And promote sysfs entry for set/get srm to kdoc. Suggested-by:
-
Joshua Ashton authored
Despite certain GPUs supporting multiple overlay planes already in AMDGPU, the driver did not expose the zpos property which is required for userspace to take advantage of multiple overlay planes in any meaningful way. The driver was already hooked up to normalized_zpos, but was just missing the exposure of it. Cc: Harry Wentland <harry.wentland@amd.com> Cc: Melissa Wen <mwen@igalia.com> Cc: Simon Ser <contact@emersion.fr> Reviewed-by:
Joshua Ashton <joshua@froggi.es> Signed-off-by:
-
Alex Deucher authored
Use current uclk to be consistent with other dGPUs. Reviewed-by:
Kenneth Feng <kenneth.feng@amd.com> Signed-off-by:
-
Alex Deucher authored
Use average gfxclock for consistency with other dGPUs. Reviewed-by:
-
