- 24 Mar, 2013 12 commits
-
-
Hans Verkuil authored
Control whether video sequence headers should be repeated. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Just checking if the op exists isn't correct, you should check if the ioctl is valid (which implies that the op exists as well). One exception is g_std: if current_norm is non-zero, then the g_std op may be absent. This sort of weird behavior is one of the reasons why I am trying to get rid of current_norm. This patch fixes the case where the g/s_std op is set, but these ioctls are disabled. This can happen in drivers supporting multiple models, some that have TV input (and support the STD API) and some that have a sensor (and do not support the STD API). In the latter case qv4l2 would still show the Standards combobox. Signed-off-by:
-
Hans Verkuil authored
This patch adds a v4l2_subdev_has_op() macro and a v4l2_device_has_op macro to quickly check if a specific subdev or any subdev supports a particular subdev operation. This makes it easy for drivers to disable certain ioctls if none of the subdevs supports the necessary functionality. Signed-off-by:
-
Andy Walls authored
When calling v4l2_ctrl_add_handler(), lockdep would detect a potential recursive locking problem on a situation that is by design intended and not a recursive lock. This happened because all struct v4l2_ctrl_handler.lock mutexes were created as members of the same lock class in v4l2_ctrl_handler_init(), and v4l2_ctrl_add_handler() takes the hdl->lock on two different v4l2_ctrl_handler instances. This change breaks the large lockdep lock class for struct v4l2_ctrl_handler.lock and breaks it into v4l2_ctrl_handler instantiation specific lock classes with meaningful class names. This will validly eliminate lockdep alarms for v4l2_ctrl_handler locking validation, as long as the relationships between drivers adding v4l2 controls to their own handler from other v4l2 drivers' control handlers remains straightforward. struct v4l2_ctrl_handler.lock lock classes are created with names such that the output of cat /proc/lockdep indicates where in the v4l2 driver code v4l2_ctrl_handle_init() is being called on instantiations: ffffffffa045f490 FD: 10 BD: 8 +.+...: cx2341x:1534:(hdl)->lock ffffffffa0497d20 FD: 12 BD: 2 +.+.+.: saa7115:1581:(hdl)->lock ffffffffa04ac660 FD: 14 BD: 2 +.+.+.: msp3400_driver:756:(hdl)->lock ffffffffa0484b90 FD: 12 BD: 1 +.+.+.: ivtv_gpio:366:(&itv->hdl_gpio)->lock ffffffffa04eb530 FD: 11 BD: 2 +.+.+.: cx25840_core:1982:(&state->hdl)->lock ffffffffa04fbc80 FD: 11 BD: 3 +.+.+.: wm8775:246:(&state->hdl)->lock Some lock chains, that were previously causing the recursion alarms, are now visible in the output of cat /proc/lockdep_chains: irq_context: 0 [ffffffffa0497d20] saa7115:1581:(hdl)->lock [ffffffffa045f490] cx2341x:1534:(hdl)->lock irq_context: 0 [ffffffffa04ac660] msp3400_driver:756:(hdl)->lock [ffffffffa045f490] cx2341x:1534:(hdl)->lock irq_context: 0 [ffffffffa0484b90] ivtv_gpio:366:(&itv->hdl_gpio)->lock [ffffffffa045f490] cx2341x:1534:(hdl)->lock irq_context: 0 [ffffffffa04eb530] cx25840_core:1982:(&state->hdl)->lock [ffffffffa045f490] cx2341x:1534:(hdl)->lock irq_context: 0 [ffffffffa04fbc80] wm8775:246:(&state->hdl)->lock [ffffffffa045f490] cx2341x:1534:(hdl)->lock Signed-off-by:
Andy Walls <awalls@md.metrocast.net> [hans.verkuil@cisco.com: keep mutex_init in v4l2_ctrl_handler_init_class] Signed-off-by:
-
Masanari Iida authored
Correct spelling typos. Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Signed-off-by:
-
Hans Verkuil authored
The core debug code can now be simplified since all the write-only ioctls are now const and will not modify the data they pass to the drivers. So instead of logging write-only ioctls before the driver is called this can now be done afterwards, which is cleaner when it comes to error reporting as well. This also fixes a logic error in the debugging code where there was one 'else' too many. Signed-off-by:
-
Hans Verkuil authored
This ioctl is defined as IOW, so pass the argument as const. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Hans Verkuil authored
The ivtv_itvc function receives a pointer to v4l2_dbg_register. When we add const to that pointer in the s_register case we will run into a problem here since this common function would discard const in that case. So change this function so it receives the address and a pointer to a value. In addition we now set the size field in the g_register function which is where it belongs. This will simplify the next patch where const will be added to s_register. Signed-off-by:
-
Hans Verkuil authored
Never print more than the size of the buffer containing the name. Signed-off-by:
-
Hans Verkuil authored
This ioctl is defined as IOW, so pass the argument by value instead of by reference. I could have chosen to add const instead, but this is 1) easier to handle in drivers and 2) consistent with the s_std subdev operation. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Jonathan Corbet <corbet@lwn.net> Acked-by:
-
Hans Verkuil authored
This ioctl is defined as IOW, so pass the argument as const. Signed-off-by:
Alexey Klimov <klimov.linux@gmail.com> Signed-off-by:
-
Hans Verkuil authored
This ioctl is defined as IOW, so pass the argument as const. Signed-off-by:
-
- 23 Mar, 2013 28 commits
-
-
Silviu-Mihai Popescu authored
This uses the resource_size() function instead of explicit computation. Signed-off-by:
Silviu-Mihai Popescu <silviupopescu1990@gmail.com> Acked-by:
-
Frank Schaefer authored
Previously, this has been done implicitly for video device nodes by calling set_input() (which calls audio_input() and also modified the mute setting). Since input and mute setting are now untangled (as much as possible), we need to apply the mute setting with an explicit call to audio_mute(). Also apply the mute setting when the radio device node gets opened. Signed-off-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by:
-
Frank Schaefer authored
Signed-off-by:
-
Frank Schaefer authored
Split function audio_mux(): move the mute setting part to function audio_mute() and the input setting part to function audio_input(). Signed-off-by:
-
Frank Schaefer authored
Move the GPIO part of function audio_mux() to a separate function audio_mux_gpio(). This prepares the code for the next patch which will separate mute and input setting. Signed-off-by:
-
Frank Schaefer authored
'audio_input' better describes the meaning of this field. Signed-off-by:
-
Frank Schaefer authored
We can't and do not save the mute setting in function audio_mux(), so we should also not save the input in this function for consistency. Signed-off-by:
-
Frank Schaefer authored
There are cases where we want to call audio_mux() without changing the value of the v4l2 mute control, for example - mute mute on last close - mute on device probing Signed-off-by:
-
Frank Schaefer authored
[media] bttv: audio_mux(): use a local variable "gpio_mute" instead of modifying the function parameter "mute" Function audio_mux() actually deals with two types of mute: gpio mute and subdevice muting. This patch claryfies the meaning of these values, but mainly prepares the code for the next patch. Signed-off-by:
-
Wei Yongjun authored
In case of error, the function clk_get() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
David Härdeman authored
store_protocols() treats dev->rc_map.rc_type as a bitmap which is wrong for two reasons. First of all, it is pretty bogus to change the protocol type of the keymap just because the hardware has been asked to decode a different protocol. Second, dev->rc_map.rc_type is an enum (i.e. a single protocol) as pointed out by James Hogan <james.hogan@imgtec.com>. Fix both issues by introducing a separate enabled_protocols member to struct rc_dev. Signed-off-by:
David Härdeman <david@hardeman.nu> Signed-off-by:
-
Sachin Kamat authored
ts2020.h was included twice. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Jose Alberto Reguero authored
This patch enable dual tuner for Avermedia Twinstar. Signed-off-by:
Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by:
-
Hans Verkuil authored
The dv_preset API is deprecated and is replaced by the much improved dv_timings API. Remove the dv_preset support from this driver as this will allow us to remove the dv_preset API altogether (s5p-tv being the last user of this code). Signed-off-by:
Tomasz Stanislawski <t.stanislaws@samsung.com> Acked-by:
-
Hans Verkuil authored
The dv_preset API is deprecated and is replaced by the much improved dv_timings API. Remove the dv_preset support from this driver as this will allow us to remove the dv_preset API altogether (s5p-tv being the last user of this code). Signed-off-by:
-
Hans Verkuil authored
The dv_preset API is deprecated and is replaced by the much improved dv_timings API. Remove the dv_preset support from this driver as this will allow us to remove the dv_preset API altogether (s5p-tv being the last user of this code). Signed-off-by:
-
Hans Verkuil authored
This just adds dv_timings support without modifying existing dv_preset support. Signed-off-by:
-
Hans Verkuil authored
This just adds dv_timings support without modifying existing dv_preset support. Signed-off-by:
-
Hans Verkuil authored
This just adds dv_timings support without modifying existing dv_preset support, although I had to refactor a little bit in order to share hdmiphy_find_conf() between the preset and timings code. Signed-off-by:
-
Wei Yongjun authored
usb_free_coherent() is safe with NULL addr and this check is not required. Signed-off-by:
-
Jean Delvare authored
Last parameter of function GetLockStatus() isn't used so drop it. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Lad, Prabhakar authored
export the symbols which are used by two modules vpif_capture and vpif_display. renamed "ch_params" to "vpif_ch_params" so as to avoid name collision. This patch fixes following error: ERROR: "ch_params" [drivers/media/platform/davinci/vpif_display.ko] undefined! ERROR: "vpif_ch_params_count" [drivers/media/platform/davinci/vpif_display.ko] undefined! ERROR: "vpif_base" [drivers/media/platform/davinci/vpif_display.ko] undefined! ERROR: "ch_params" [drivers/media/platform/davinci/vpif_capture.ko] undefined! ERROR: "vpif_ch_params_count" [drivers/media/platform/davinci/vpif_capture.ko] undefined! ERROR: "vpif_base" [drivers/media/platform/davinci/vpif_capture.ko] undefined! make[1]: *** [__modpost] Error 1 Reported-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
Chen Gang authored
for NUL terminated string, need always set 0 in the end. Signed-off-by:
Chen Gang <gang.chen@asianux.com> Signed-off-by:
-
Eduardo Valentin authored
Add MODULE_ALIAS entry for radio-si4713 platform driver. Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Acked-by:
-
Eduardo Valentin authored
Simple addition of platform_driver->driver->owner for radio-si4713. Signed-off-by:
-
Eduardo Valentin authored
As per code header comment, changing the driver license entry to match the correct version. Signed-off-by:
-
Eduardo Valentin authored
Minor changes to make alignment match on open parenthesis. Signed-off-by:
-
Antti Palosaari authored
I just made commit: "dvb_usb_v2: rework USB streaming logic" that breaks that driver PID filter. it913x driver checks use of PID filter directly from DVB USB v2 core internal variable "adap->pid_filtering" and stores it to own state. Calling order of .pid_filter_ctrl() and .pid_filter() was changed and due to that state was updated too late. Update state earlier. TODO: checking PID filter usage from DVB USB v2 is not very good idea as PID filter callbacks are called only when PID filter is enabled. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
