- 25 Sep, 2008 40 commits
-
-
Christoph Hellwig authored
Add kerneldoc comments for all exported functions. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Chris Mason authored
mount -o thread_pool_size changes the default, which is min(num_cpus + 2, 8). Larger thread pools would make more sense on very large disk arrays. This mount option controls the max size of each thread pool. There are multiple thread pools, so the total worker count will be larger than the mount option. Signed-off-by: -
Chris Mason authored
This changes the worker thread pool to maintain a list of idle threads, avoiding a complex search for a good thread to wake up. Threads have two states: idle - we try to reuse the last thread used in hopes of improving the batching ratios busy - each time a new work item is added to a busy task, the task is rotated to the end of the line. Signed-off-by: -
Chris Mason authored
Signed-off-by: -
Chris Mason authored
max_inline=0 used to force the max_inline size to one sector instead. Now it properly disables inline data items, while still being able to read any that happen to exist on disk. Signed-off-by: -
Chris Mason authored
Btrfs has been using workqueues to spread the checksumming load across other CPUs in the system. But, workqueues only schedule work on the same CPU that queued the work, giving them a limited benefit for systems with higher CPU counts. This code adds a generic facility to schedule work with pools of kthreads, and changes the bio submission code to queue bios up. The queueing is important to make sure large numbers of procs on the system don't turn streaming workloads into random workloads by sending IO down concurrently. The end result of all of this is much higher performance (and CPU usage) when doing checksumming on large machines. Two worker pools are created, one for writes and one for endio processing. The two could deadlock if we tried to service both from a single pool. Signed-off-by: -
Christoph Hellwig authored
Allows to specify one or multiple device=/dev/foo options during mount so that ioctls on the control device can be avoided. Especially useful when trying to mount a multi-device setup as root. Signed-off-by:
-
Christoph Hellwig authored
Also adds lots of comments to describe what's going on here. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by: -
Christoph Hellwig authored
use normal kbuild syntax to build acl.o conditinally and remove comment out lines. Signed-off-by:
-
Sage Weil authored
These ioctls let a user application hold a transaction open while it performs a series of operations. A final ioctl does a sync on the fs (closing the current transaction). This is the main requirement for Ceph's OSD to be able to keep the data it's storing in a btrfs volume consistent, and AFAICS it works just fine. The application would do something like fd = ::open("some/file", O_RDONLY); ::ioctl(fd, BTRFS_IOC_TRANS_START); /* do a bunch of stuff */ ::ioctl(fd, BTRFS_IOC_TRANS_END); or just ::close(fd); And to ensure it commits to disk, ::ioctl(fd, BTRFS_IOC_SYNC); When a transaction is held open, the trans_handle is attached to the struct file (via private_data) so that it will get cleaned up if the process dies unexpectedly. A held transaction is also ended on fsync() to avoid a deadlock. A misbehaving application could also deliberately hold a transaction open, effectively locking up the FS, so it may make sense to restrict something like this to root or something. Signed-off-by: -
Yan authored
The acl code is not yet complete, and the xattr handlers are causing problems for cp -p on some distros. Signed-off-by: -
Jan Engelhardt authored
Signed-off-by: -
Linda Knippers authored
Send the error back to userland if the ioctl fails Signed-off-by: -
Sven Wegener authored
We need to invalidate an existing dcache entry after creating a new snapshot or subvolume, because a negative dache entry will stop us from accessing the new snapshot or subvolume. --- ctree.h | 23 +++++++++++++++++++++++ inode.c | 4 ++++ transaction.c | 4 ++++ 3 files changed, 31 insertions(+) Signed-off-by: -
Chris Mason authored
When a new transaction was started, the code would incorrectly set the pointer in fs_info before all the data structures were setup. fsync heavy workloads hit races on the setup of the ordered inode spinlock Signed-off-by: -
Mingming authored
Use btrfs_release_file instead of a put_inode call Signed-off-by: -
Chris Mason authored
This avoids IO stalls and poorly ordered IO from inline writers mixing in with the async submission queue Signed-off-by: -
Chris Mason authored
* Force chunk allocation when find_free_extent has to do a full scan * Record the max key at the start of defrag so it doesn't run forever * Block groups might not be contiguous, make a forward search for the next block group in extent-tree.c * Get rid of extra checks for total fs size * Fix relocate_one_reference to avoid relocating the same file data block twice when referenced by an older transaction * Use the open device count when allocating chunks so that we don't try to allocate from devices that don't exist Signed-off-by: -
Chris Mason authored
Signed-off-by: -
Chris Mason authored
Signed-off-by: -
Chris Mason authored
Signed-off-by: -
Chris Mason authored
The async submit workqueue was absorbing too many requests, leading to long stalls where the async submitters were stalling. Signed-off-by: -
Chris Mason authored
The extent_io writepage calls needed an extra check for discarding pages that started on th last byte in the file. btrfs_truncate_page needed checks to make sure the page was still part of the file after reading it, and most importantly, needed to wait for all IO to the page to finish before freeing the corresponding extents on disk. Signed-off-by: -
Chris Mason authored
Devices can change after the scan ioctls are done, and btrfs_open_devices needs to be able to verify them as they are opened and used by the FS. Signed-off-by: -
Chris Mason authored
Signed-off-by: -
Chris Mason authored
When duplicate copies exist, writes are allowed to fail to one of those copies. This changeset includes a few changes that allow the FS to continue even when some IOs fail. It also adds verification of the parent generation number for btree blocks. This generation is stored in the pointer to a block, and it ensures that missed writes to are detected. Signed-off-by: -
Chris Mason authored
Signed-off-by: -
Chris Mason authored
Signed-off-by: -
Chris Mason authored
Signed-off-by: -
Chris Mason authored
Once part of a delalloc request fails the cow checks, just cow the entire range It is possible for the back references to all be from the same root, but still have snapshots against an extent. The checks are now more strict, forcing cow any time there are multiple refs against the data extent. Signed-off-by: -
Chris Mason authored
btrfs_open_devices needed a check to see if the device was already open. Signed-off-by: -
Chris Mason authored
Before, nodatacow only checked to make sure multiple roots didn't have references on a single extent. This check makes sure that multiple inodes don't have references. nodatacow needed an extra check to see if the block group was currently readonly. This way cows forced by the chunk relocation code are honored. Signed-off-by: -
Chris Mason authored
Signed-off-by: -
Chris Mason authored
This required a few structural changes to the code that manages bdev pointers: The VFS super block now gets an anon-bdev instead of a pointer to the lowest bdev. This allows us to avoid swapping the super block bdev pointer around at run time. The code to read in the super block no longer goes through the extent buffer interface. Things got ugly keeping the mapping constant. Signed-off-by: -
Chris Mason authored
Signed-off-by: -
Chris Mason authored
Signed-off-by: -
Jeff Mahoney authored
In openSUSE 10.3, AppArmor modifies remove_suid to take a struct path rather than just a dentry. This patch tests that the kernel is openSUSE 10.3 or newer and adjusts the call accordingly. Debian/Ubuntu with AppArmor applied will also need a similar patch. Maintainers of btrfs under those distributions should build on this patch or, alternatively, alter their package descriptions to add -DREMOVE_SUID_PATH to the compiler command line. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> - --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ b/compat.h 2008-02-06 16:46:13.000000000 -0500 @@ -0,0 +1,15 @@ +#ifndef _COMPAT_H_ +#define _COMPAT_H_ + + +/* + * Even if AppArmor isn't enabled, it still has different prototypes. + * Add more distro/version pairs here to declare which has AppArmor applied. + */ +#if defined(CONFIG_SUSE_KERNEL) +# if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,22) +# define REMOVE_SUID_PATH 1 +# endif +#endif + +#endif /* _COMPAT_H_ */ - --- a/file.c 2008-02-06 11:37:39.000000000 -0500 +++ b/file.c 2008-02-06 16:46:23.000000000 -0500 @@ -37,6 +37,7 @@ #include "ordered-data.h" #include "ioctl.h" #include "print-tree.h" +#include "compat.h" static int btrfs_copy_from_user(loff_t pos, int num_pages, int write_bytes, @@ -790,7 +791,11 @@ static ssize_t btrfs_file_write(struct f goto out_nolock; if (count == 0) goto out_nolock; +#ifdef REMOVE_SUID_PATH + err = remove_suid(&file->f_path); +#else err = remove_suid(fdentry(file)); +#endif if (err) goto out_nolock; file_update_time(file); Signed-off-by:
-
Chris Mason authored
Signed-off-by: -
Chris Mason authored
Signed-off-by:
-
