- 01 Dec, 2014 40 commits
-
-
Marcel Holtmann authored
commit 3a5ef20c upstream. The interrupt interface for the Intel USB bootloader devices is only enabled after receiving SetInterface(0, AltSetting=0). When this USB command is not send, then no HCI events will be received. Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Marcel Holtmann authored
commit 40df783d upstream. Intel Bluetooth devices that boot up in bootloader mode can not be used as generic HCI devices, but their HCI transport is still valuable and so bring that up as raw-only devices. T: Bus=02 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 14 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0a5a Rev= 0.00 S: Manufacturer=Intel(R) Corporation S: Product=Intel(R) Wilkins Peak 2x2 S: SerialNumber=001122334455 WP_A0 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
-
Reyad Attiyat authored
commit 46df9ded upstream. Set disconnected flag in struct usbhid when a usb device is removed. Check for disconnected flag before sending urb requests. This prevents a kernel panic when a hid driver calls hid_hw_request() after removing a usb device. BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 IP: [<ffffffff8161746f>] hid_submit_ctrl+0x7f/0x290 PGD 0 Oops: 0002 [#1] PREEMPT SMP CPU: 2 PID: 39 Comm: khubd Tainted: G IO 3.16.0-rc5+ #112 Hardware name: Microsoft Corporation Surface Pro 2/Surface Pro 2, BIOS 2.03.0250 09/06/2013 task: ffff880118aba6e0 ti: ffff8800daf80000 task.ti: ffff8800daf80000 RIP: 0010:[<ffffffff8161746f>] [<ffffffff8161746f>] hid_submit_ctrl+0x7f/0x290 RSP: 0018:ffff8800daf83750 EFLAGS: 00010086 RAX: 0000000080000300 RBX: ffff88003f60c000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff880117f78000 RBP: ffff8800daf83788 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: ffff880117f78000 R13: ffff88003f11a290 R14: 000000000000000c R15: ffff880091cb3ab8 FS: 0000000000000000(0000) GS:ffff88011b000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000058 CR3: 0000000001c11000 CR4: 00000000001407e0 Stack: ffff880117f3dcd0 ffff880117f78000 ffff88003f60c000 ffff880117f78000 ffff880117f78000 ffff88003f11a290 0000000000000000 ffff8800daf837b0 ffffffff81617707 ffff880117f78000 ffff88003f60c000 0000000000000013 Call Trace: [<ffffffff81617707>] usbhid_restart_ctrl_queue+0x87/0x140 [<ffffffff81617a88>] usbhid_submit_report+0x2c8/0x370 [<ffffffff81617b4a>] usbhid_request+0x1a/0x30 [<ffffffffa020edfb>] sensor_hub_set_feature+0x8b/0xd0 [hid_sensor_hub] [<ffffffffa02d9084>] hid_sensor_power_state+0x84/0x110 [hid_sensor_trigger] [<ffffffffa02d9129>] hid_sensor_data_rdy_trigger_set_state+0x19/0x20 [hid_sensor_trigger] [<ffffffffa034d5b7>] iio_triggered_buffer_predisable+0xa7/0xb0 [industrialio] [<ffffffffa034cc4a>] iio_disable_all_buffers+0x3a/0xc0 [industrialio] [<ffffffffa03487d3>] iio_device_unregister+0x53/0x80 [industrialio] [<ffffffffa026c06a>] hid_accel_3d_remove+0x2a/0x50 [hid_sensor_accel_3d] [<ffffffff814f433d>] platform_drv_remove+0x1d/0x40 [<ffffffff814f18bf>] __device_release_driver+0x7f/0xf0 [<ffffffff814f1955>] device_release_driver+0x25/0x40 [<ffffffff814f121c>] bus_remove_device+0x11c/0x1a0 [<ffffffff814ed7d6>] device_del+0x136/0x1e0 [<ffffffff81512190>] ? mfd_cell_disable+0x80/0x80 [<ffffffff814f41d1>] platform_device_del+0x21/0xc0 [<ffffffff814f4282>] platform_device_unregister+0x12/0x30 [<ffffffff815121d3>] mfd_remove_devices_fn+0x43/0x50 [<ffffffff814ed3e3>] device_for_each_child+0x43/0x70 [<ffffffff81512105>] mfd_remove_devices+0x25/0x30 [<ffffffffa020ebd7>] sensor_hub_remove+0x87/0x140 [hid_sensor_hub] [<ffffffff81607c5b>] hid_device_remove+0x6b/0xd0 [<ffffffff814f18bf>] __device_release_driver+0x7f/0xf0 [<ffffffff814f1955>] device_release_driver+0x25/0x40 [<ffffffff814f121c>] bus_remove_device+0x11c/0x1a0 [<ffffffff814ed7d6>] device_del+0x136/0x1e0 [<ffffffff81607d47>] hid_destroy_device+0x27/0x60 [<ffffffff81616972>] usbhid_disconnect+0x22/0x50 [<ffffffff81568597>] usb_unbind_interface+0x77/0x2b0 [<ffffffff814f18bf>] __device_release_driver+0x7f/0xf0 [<ffffffff814f1955>] device_release_driver+0x25/0x40 [<ffffffff814f121c>] bus_remove_device+0x11c/0x1a0 [<ffffffff814ed7d6>] device_del+0x136/0x1e0 [<ffffffff81565cd1>] usb_disable_device+0x91/0x2a0 [<ffffffff8155b046>] usb_disconnect+0x96/0x2e0 [<ffffffff8155d74a>] hub_thread+0xb5a/0x1840 Signed-off-by:
Reyad Attiyat <reyad.attiyat@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Andreas Schwab authored
commit 7c2105fb upstream. This fixes the following build failure when building with CONFIG_MODVERSIONS enabled: CC [M] arch/arm64/crypto/aes-glue-ce.o ld: cannot find arch/arm64/crypto/aes-glue-ce.o: No such file or directory make[1]: *** [arch/arm64/crypto/aes-ce-blk.o] Error 1 make: *** [arch/arm64/crypto] Error 2 The $(obj)/aes-glue-%.o rule only creates $(obj)/.tmp_aes-glue-ce.o, it should use if_changed_rule instead of if_changed_dep. Signed-off-by:
Andreas Schwab <schwab@suse.de> [ardb: mention CONFIG_MODVERSIONS in commit log] Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Devin Ryles authored
commit b4565913 upstream. This patch adds DeviceIDs for Sunrise Point-LP Signed-off-by:
Devin Ryles <devin.ryles@intel.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
James Ralston authored
commit c8b00fd2 upstream. This patch adds the HD Audio Device IDs for the Intel Sunrise Point PCH. [the item position rearranged by tiwai] Signed-off-by:
James Ralston <james.d.ralston@intel.com> Signed-off-by:
-
Robert Jarzmik authored
commit cde7fc87 upstream. The commit 2111667b ("ARM: pxa: call debug_ll_io_init for earlyprintk") triggers in the current kernel the attached backtrace on PXA/tosa early in the boot time when DEBUG_LL is enabled. It is due to overlap between uart virtual memory defined in DEBUG_UART_VIRT and mapped by debug_ll_io_init() and peripheral bus mapped by pxa_map_io at the same address, 0xf2100000. As hinted by Arnd, map early virtual memory for low level debug on address 0xf6200000, even if that means 2 virtual mappings will give access to the pxa internal UARTs (FFUART, BTUART, STUART, ...). ------------[ cut here ]------------ kernel BUG at /home/lumag/linux/mm/vmalloc.c:1143! Internal error: Oops - BUG: 0 [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 3.17.0-00032-g8e0d202-dirty #23 task: c062a5a8 ti: c0620000 task.ti: c0620000 PC is at vm_area_add_early+0x54/0x84 LR is at add_static_vm_early+0xc/0x60 pc : [<c03e1100>] lr : [<c03d9ef4>] psr: 800001d3 sp : c0621f04 ip : c03efa74 fp : c03edf84 r10: c0637e98 r9 : 40000001 r8 : c03da57c r7 : c3ffcfb0 r6 : 00000000 r5 : c3ffcfb0 r4 : 02000000 r3 : c3ffcfd8 r2 : f2100000 r1 : f4000000 r0 : c3ffcfb0 Flags: Nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel Control: 00007977 Table: a0004000 DAC: 00000017 Process swapper (pid: 0, stack limit = 0xc06201c8) Stack: (0xc0621f04 to 0xc0622000) 1f00: c3ffcfd8 40000001 c3ffcfd8 c03ee08c c03da570 c03db90c c0637d24 1f20: 00000000 c03ec7cc c066e654 a0700000 000a0700 c03db914 c03db90c c03daf84 1f40: 00000000 000a0000 c0000000 c03ec7cc 000a0700 c0700000 ffff1000 000a3fff 1f60: 00001000 00000007 00000000 c03ec7cc c0008000 c03ed748 c0621fd4 c03d5d18 1f80: 69052d00 a03ec48c 00000000 c03d8ad0 0000006c 00007977 c036c6e8 00000001 1fa0: c0621fd4 c03ed744 c0628000 a0004000 69052d00 a03ec48c 00000000 c03d68d4 1fc0: 00000000 00000000 00000000 00000000 00000000 c03ed748 c0649894 c062801c 1fe0: c03ed744 c062b2f0 a0004000 69052d00 a03ec48c a0008040 00000000 00000000 [<c03e1100>] (vm_area_add_early) from [<c03d9ef4>] (add_static_vm_early+0xc/0x60) [<c03d9ef4>] (add_static_vm_early) from [<c03da570>] (iotable_init.part.6+0xa8/0xb4) [<c03da570>] (iotable_init.part.6) from [<c03db914>] (pxa25x_map_io+0x8/0x24) [<c03db914>] (pxa25x_map_io) from [<c03daf84>] (paging_init+0x744/0x8d8) [<c03daf84>] (paging_init) from [<c03d8ad0>] (setup_arch+0x354/0x608) [<c03d8ad0>] (setup_arch) from [<c03d68d4>] (start_kernel+0xa8/0x3dc) [<c03d68d4>] (start_kernel) from [<a0008040>] (0xa0008040) Code: e5904008 e0811004 e1520001 2a000005 (e7f001f2) ---[ end trace f24b6c88ae00fa9a ]--- Kernel panic - not syncing: Attempted to kill the idle task! ---[ end Kernel panic - not syncing: Attempted to kill the idle task! Reported-by:
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Acked-by:
Arnd Bergmann <arnd@arndb.de> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Mikhail Efremov authored
commit d2fa4a84 upstream. Only exchange source and destination filenames if flags contain RENAME_EXCHANGE. In case if executable file was running and replaced by other file /proc/PID/exe should still show correct file name, not the old name of the file by which it was replaced. The scenario when this bug manifests itself was like this: * ALT Linux uses rpm and start-stop-daemon; * during a package upgrade rpm creates a temporary file for an executable to rename it upon successful unpacking; * start-stop-daemon is run subsequently and it obtains the (nonexistant) temporary filename via /proc/PID/exe thus failing to identify the running process. Note that "long" filenames (> DNAiME_INLINE_LEN) are still exchanged without RENAME_EXCHANGE and this behaviour exists long enough (should be fixed too apparently). So this patch is just an interim workaround that restores behavior for "short" names as it was before changes introduced by commit da1ce067 ("vfs: add cross-rename"). See https://lkml.org/lkml/2014/9/7/6 for details. AV: the comments about being more careful with ->d_name.hash than with ->d_name.name are from back in 2.3.40s; they became obsolete by 2.3.60s, when we started to unhash the target instead of swapping hash chain positions followed by d_delete() as we used to do when dcache was first introduced. Acked-by:
Miklos Szeredi <mszeredi@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Fixes: da1ce067 "vfs: add cross-rename" Signed-off-by:
Mikhail Efremov <sem@altlinux.org> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> [ luis: used Stefan's backport to 3.16 ] Signed-off-by:
-
Linus Torvalds authored
commit a28ddb87 upstream. and do it along with ->d_name.len there Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Andy Lutomirski authored
commit 6f442be2 upstream. On a 32-bit kernel, this has no effect, since there are no IST stacks. On a 64-bit kernel, #SS can only happen in user code, on a failed iret to user space, a canonical violation on access via RSP or RBP, or a genuine stack segment violation in 32-bit kernel code. The first two cases don't need IST, and the latter two cases are unlikely fatal bugs, and promoting them to double faults would be fine. This fixes a bug in which the espfix64 code mishandles a stack segment violation. This saves 4k of memory per CPU and a tiny bit of code. Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Alex Deucher authored
commit 28731d58 upstream. Value needs to be swapped on BE. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Chris Moore authored
commit b1a5ad00 upstream. isert has an issue of trying to create a CQ with more CQEs than are supported by the hardware, that currently results in failures during isert_device creation during first session login. This is the isert version of the patch that Minh Tran submitted for iser, and is simple a workaround required to function with existing ocrdma hardware. Signed-off-by:
Chris Moore <chris.moore@emulex.com> Reviewied-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Rafael J. Wysocki authored
commit 78579b7c upstream. As reported by Dmitry, on some Chromebooks there are devices with corresponding ACPI objects and with unusual system wakeup configuration. Namely, they technically are wakeup-capable, but the wakeup is handled via a platform-specific out-of-band mechanism and the ACPI PM layer has no information on the wakeup capability. As a result, device_may_wakeup(dev) called from acpi_dev_suspend_late() returns 'true' for those devices, but the wakeup.flags.valid flag is unset for the corresponding ACPI device objects, so acpi_device_wakeup() reproducibly fails for them causing acpi_dev_suspend_late() to return an error code. The entire system suspend is then aborted and the machines in question cannot suspend at all. Address the problem by ignoring the device_may_wakeup(dev) return value in acpi_dev_suspend_late() if the ACPI companion of the device being handled has wakeup.flags.valid unset (in which case it is clear that the wakeup is supposed to be handled by other means). This fixes a regression introduced by commit a76e9bd8 (i2c: attach/detach I2C client device to the ACPI power domain) as the affected systems could suspend and resume successfully before that commit. Fixes: a76e9bd8 (i2c: attach/detach I2C client device to the ACPI power domain) Reported-by:
Dmitry Torokhov <dtor@chromium.org> Reviewed-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Yinghai Lu authored
commit 7fc986d8 upstream. Aaron reported that a 32-bit x86 kernel with Physical Address Extension (PAE) support complains about bridge prefetchable memory windows above 4GB: pci_bus 0000:00: root bus resource [mem 0x380000000000-0x383fffffffff] ... pci 0000:03:00.0: reg 0x10: [mem 0x383fffc00000-0x383fffdfffff 64bit pref] pci 0000:03:00.0: reg 0x20: [mem 0x383fffe04000-0x383fffe07fff 64bit pref] pci 0000:03:00.1: reg 0x10: [mem 0x383fffa00000-0x383fffbfffff 64bit pref] pci 0000:03:00.1: reg 0x20: [mem 0x383fffe00000-0x383fffe03fff 64bit pref] pci 0000:00:02.2: PCI bridge to [bus 03-04] pci 0000:00:02.2: bridge window [io 0x1000-0x1fff] pci 0000:00:02.2: bridge window [mem 0x91900000-0x91cfffff] pci 0000:00:02.2: can't handle 64-bit address space for bridge In this kernel, unsigned long is 32 bits and dma_addr_t is 64 bits. Previously we used "unsigned long" to hold the bridge window address. But this is a bus address, so we should use dma_addr_t instead. Use dma_addr_t to hold the bridge window base and limit. The question of whether the CPU can actually *address* the window is separate and depends on what the physical address space of the CPU is and whether the host bridge does any address translation. [bhelgaas: fix "shift count > width of type", changelog, stable tag] Fixes: d56dbf5b ("PCI: Allocate 64-bit BARs above 4G when possible") Link: https://bugzilla.kernel.org/show_bug.cgi?id=88131Reported-by:
Aaron Ma <mapengyu@gmail.com> Tested-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Chris Mason authored
commit f82c458a upstream. The fair reader/writer locks mean that btrfs_clear_path_blocking needs to strictly follow lock ordering rules even when we already have blocking locks on a given path. Before we can clear a blocking lock on the path, we need to make sure all of the locks have been converted to blocking. This will remove lock inversions against anyone spinning in write_lock() against the buffers we're trying to get read locks on. These inversions didn't exist before the fair read/writer locks, but now we need to be more careful. We papered over this deadlock in the past by changing btrfs_try_read_lock() to be a true trylock against both the spinlock and the blocking lock. This was slower, and not sufficient to fix all the deadlocks. This patch adds a btrfs_tree_read_lock_atomic(), which basically means get the spinlock but trylock on the blocking lock. Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
Josef Bacik <jbacik@fb.com> Reported-by:
Patrick Schmid <schmid@phys.ethz.ch> Signed-off-by:
-
Markos Chandras authored
commit 51b1029d upstream. Commit cf62a8b8 ("MIPS: lib: memcpy: Use macro to build the copy_user code") switched to a macro in order to build the memcpy symbols in preparation for the EVA support. However, this commit also removed the NOP instruction after the 'jr ra' when returning back to the caller. This had no visible side-effects since the next instruction was a load to the t0 register which was already in the clobbered list, but it may have undesired effects in the future if some other code is introduced in between the .Ldone and the .Ll_exc_copy labels. Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8512/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Markos Chandras authored
commit 58563817 upstream. When EVA is turned on and prefetching is being used in memcpy.S, the v1 register is being used as a helper register to the PREFE instruction. However, v1 ($3) was not in the clobber list, which means that the compiler did not preserve it across function calls, and that could corrupt the value of the register leading to all sorts of userland crashes. We fix this problem by using the DADDI_SCRATCH macro to define the clobbered register when CONFIG_EVA && CONFIG_CPU_HAS_PREFETCH are enabled. Signed-off-by:
-
Aaro Koskinen authored
commit bbaf113a upstream. Fix incorrect cast that always results in wrong address for the new frame on 64-bit kernels. Signed-off-by:
Aaro Koskinen <aaro.koskinen@nsn.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8110/Signed-off-by:
-
James Cowgill authored
commit 5829b0ec upstream. export the __node_distances symbol in the ip27 memory code to fix the build error: Building modules, stage 2. MODPOST 311 modules ERROR: "__node_distances" [drivers/block/nvme.ko] undefined! scripts/Makefile.modpost:90: recipe for target '__modpost' failed when building the kernel with: CONFIG_SGI_IP27=y CONFIG_BLK_DEV_NVME=m Signed-off-by:
James Cowgill <James.Cowgill@imgtec.com> Reviewed-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
-
Maxime Ripard authored
commit 6bab4a8a upstream. The interrupts were activated and the handler registered before the clockevent was registered in the probe function. The interrupt handler, however, was making the assumption that the clockevent device was registered. That could cause a null pointer dereference if the timer interrupt was firing during this narrow window. Fix that by moving the clockevent registration before the interrupt is enabled. Reported-by:
Roman Byshko <rbyshko@gmail.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit 746c9e9f upstream. We have a historical hack that treats missing ranges properties as the equivalent of an empty one. This is needed for ancient PowerMac "bad" device-trees, and shouldn't be enabled for any other PowerPC platform, otherwise we get some nasty layout of devices in sysfs or even duplication when a set of otherwise identically named devices is created multiple times under a different parent node with no ranges property. This fix is needed for the PowerNV i2c busses to be exposed properly and will fix a number of other embedded cases. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by:
Grant Likely <grant.likely@linaro.org> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Kevin Cernekee authored
commit ab74d00a upstream. __earlycon_of_table_sentinel.compatible is a char[128], not a pointer, so it will never be NULL. Checking it against NULL causes the match loop to run past the end of the array, and eventually match a bogus entry, under the following conditions: - Kernel command line specifies "earlycon" with no parameters - DT has a stdout-path pointing to a UART node - The UART driver doesn't use OF_EARLYCON_DECLARE (or maybe the console driver is compiled out) Fix this by checking to see if match->compatible is a non-empty string. Signed-off-by:
Kevin Cernekee <cernekee@gmail.com> Signed-off-by:
-
Bjorn Helgaas authored
commit 66865de4 upstream. a9ecdc0f ("of/irq: Fix lookup to use 'interrupts-extended' property first") updated the description to say that: - Both 'interrupts' and 'interrupts-extended' may be present - Software should prefer 'interrupts-extended' - Software that doesn't comprehend 'interrupts-extended' may use 'interrupts' But there is still a paragraph at the end that prohibits having both and says 'interrupts' should be preferred. Remove the contradictory text. Fixes: a9ecdc0f ("of/irq: Fix lookup to use 'interrupts-extended' property first") Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
-
Kees Cook authored
commit 70b61e36 upstream. When building with the Gold linker, the .bss and .brk areas of vmlinux are shown as consecutive instead of having the same file offset. Allow for either state, as long as things add up correctly. Fixes: e6023367 ("x86, kaslr: Prevent .bss from overlaping initrd") Reported-by:
Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Junjie Mao <eternal.n08@gmail.com> Link: http://lkml.kernel.org/r/20141118001604.GA25045@www.outflux.netSigned-off-by:
-
Kees Cook authored
commit 45e2a9d4 upstream. When setting up permissions on kernel memory at boot, the end of the PMD that was split from bss remained executable. It should be NX like the rest. This performs a PMD alignment instead of a PAGE alignment to get the correct span of memory. Before: ---[ High Kernel Mapping ]--- ... 0xffffffff8202d000-0xffffffff82200000 1868K RW GLB NX pte 0xffffffff82200000-0xffffffff82c00000 10M RW PSE GLB NX pmd 0xffffffff82c00000-0xffffffff82df5000 2004K RW GLB NX pte 0xffffffff82df5000-0xffffffff82e00000 44K RW GLB x pte 0xffffffff82e00000-0xffffffffc0000000 978M pmd After: ---[ High Kernel Mapping ]--- ... 0xffffffff8202d000-0xffffffff82200000 1868K RW GLB NX pte 0xffffffff82200000-0xffffffff82e00000 12M RW PSE GLB NX pmd 0xffffffff82e00000-0xffffffffc0000000 978M pmd [ tglx: Changed it to roundup(_brk_end, PMD_SIZE) and added a comment. We really should unmap the reminder along with the holes caused by init,initdata etc. but thats a different issue ] Signed-off-by:
-
Alexey Khoroshilov authored
commit efbd50d2 upstream. It seems struct esd_usb2 dev is not deallocated on disconnect. The patch adds the missing deallocation. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by:
Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Thomas Körper authored
commit 5247a589 upstream. ikfree_skb() is Called in can_free_echo_skb(), which might be called from (TX Error) interrupt, which triggers the folloing warning: [ 1153.360705] ------------[ cut here ]------------ [ 1153.360715] WARNING: CPU: 0 PID: 31 at net/core/skbuff.c:563 skb_release_head_state+0xb9/0xd0() [ 1153.360772] Call Trace: [ 1153.360778] [<c167906f>] dump_stack+0x41/0x52 [ 1153.360782] [<c105bb7e>] warn_slowpath_common+0x7e/0xa0 [ 1153.360784] [<c158b909>] ? skb_release_head_state+0xb9/0xd0 [ 1153.360786] [<c158b909>] ? skb_release_head_state+0xb9/0xd0 [ 1153.360788] [<c105bc42>] warn_slowpath_null+0x22/0x30 [ 1153.360791] [<c158b909>] skb_release_head_state+0xb9/0xd0 [ 1153.360793] [<c158be90>] skb_release_all+0x10/0x30 [ 1153.360795] [<c158bf06>] kfree_skb+0x36/0x80 [ 1153.360799] [<f8486938>] ? can_free_echo_skb+0x28/0x40 [can_dev] [ 1153.360802] [<f8486938>] can_free_echo_skb+0x28/0x40 [can_dev] [ 1153.360805] [<f849a12c>] esd_pci402_interrupt+0x34c/0x57a [esd402] [ 1153.360809] [<c10a75b5>] handle_irq_event_percpu+0x35/0x180 [ 1153.360811] [<c10a7623>] ? handle_irq_event_percpu+0xa3/0x180 [ 1153.360813] [<c10a7731>] handle_irq_event+0x31/0x50 [ 1153.360816] [<c10a9c7f>] handle_fasteoi_irq+0x6f/0x120 [ 1153.360818] [<c10a9c10>] ? handle_edge_irq+0x110/0x110 [ 1153.360822] [<c1011b61>] handle_irq+0x71/0x90 [ 1153.360823] <IRQ> [<c168152c>] do_IRQ+0x3c/0xd0 [ 1153.360829] [<c1680b6c>] common_interrupt+0x2c/0x34 [ 1153.360834] [<c107d277>] ? finish_task_switch+0x47/0xf0 [ 1153.360836] [<c167c27b>] __schedule+0x35b/0x7e0 [ 1153.360839] [<c10a5334>] ? console_unlock+0x2c4/0x4d0 [ 1153.360842] [<c13df500>] ? n_tty_receive_buf_common+0x890/0x890 [ 1153.360845] [<c10707b6>] ? process_one_work+0x196/0x370 [ 1153.360847] [<c167c723>] schedule+0x23/0x60 [ 1153.360849] [<c1070de1>] worker_thread+0x161/0x460 [ 1153.360852] [<c1090fcf>] ? __wake_up_locked+0x1f/0x30 [ 1153.360854] [<c1070c80>] ? rescuer_thread+0x2f0/0x2f0 [ 1153.360856] [<c1074f01>] kthread+0xa1/0xc0 [ 1153.360859] [<c1680401>] ret_from_kernel_thread+0x21/0x30 [ 1153.360861] [<c1074e60>] ? kthread_create_on_node+0x110/0x110 [ 1153.360863] ---[ end trace 5ff83639cbb74b35 ]--- This patch replaces the kfree_skb() by dev_kfree_skb_any(). Signed-off-by:
Thomas Körper <thomas.koerper@esd.eu> Signed-off-by:
-
Charles Keepax authored
commit 9da7a5a9 upstream. We should not free any buffers associated with writing out coefficients to the DSP until all the async writes have completed. This patch updates the out of memory path when allocating a new buffer to include a call to regmap_async_complete. Reported-by:
JS Park <aitdark.park@samsung.com> Signed-off-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Daniel Vetter authored
commit 0485c9dc upstream. It's magic, but it seems to work. This fixes a regression introduced in commit 1bb9e632 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Jul 8 10:02:43 2014 +0200 drm/i915: Only unbind vgacon, not other console drivers My best guess is that the vga fbdev driver falls over if we rip out parts of vgacon. Hooray. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82439Reported-and-tested-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Acked-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Chris Wilson authored
commit f96de58f upstream. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Daniel Vetter authored
commit 2208d655 upstream. This reverts the regressing commit 6547fbdb Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Dec 14 23:38:29 2012 +0100 drm/i915: Implement WaSetupGtModeTdRowDispatch that causes GPU hangs immediately on boot. Reported-by:
Leo Wolf <jclw@ymail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79996Signed-off-by:
-
Dave Hansen authored
commit 2cd3949f upstream. We have some very similarly named command-line options: arch/x86/kernel/cpu/common.c:__setup("noxsave", x86_xsave_setup); arch/x86/kernel/cpu/common.c:__setup("noxsaveopt", x86_xsaveopt_setup); arch/x86/kernel/cpu/common.c:__setup("noxsaves", x86_xsaves_setup); __setup() is designed to match options that take arguments, like "foo=bar" where you would have: __setup("foo", x86_foo_func...); The problem is that "noxsave" actually _matches_ "noxsaves" in the same way that "foo" matches "foo=bar". If you boot an old kernel that does not know about "noxsaves" with "noxsaves" on the command line, it will interpret the argument as "noxsave", which is not what you want at all. This makes the "noxsave" handler only return success when it finds an *exact* match. [ tglx: We really need to make __setup() more robust. ] Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Hansen <dave@sr71.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/20141111220133.FE053984@viggo.jf.intel.comSigned-off-by:
-
Maxime COQUELIN authored
commit 00b4d9a1 upstream. On some 32 bits architectures, including x86, GENMASK(31, 0) returns 0 instead of the expected ~0UL. This is the same on some 64 bits architectures with GENMASK_ULL(63, 0). This is due to an overflow in the shift operand, 1 << 32 for GENMASK, 1 << 64 for GENMASK_ULL. Reported-by:
Eric Paire <eric.paire@st.com> Suggested-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: linux@rasmusvillemoes.dk Cc: gong.chen@linux.intel.com Cc: John Sullivan <jsrhbz@kanargh.force9.co.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Theodore Ts'o <tytso@mit.edu> Fixes: 10ef6b0d ("bitops: Introduce a more generic BITMASK macro") Link: http://lkml.kernel.org/r/1415267659-10563-1-git-send-email-maxime.coquelin@st.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Jurgen Kramer authored
commit 6e84a8d7 upstream. This patch adds a USB control message delay quirk for a few specific Marantz/Denon devices. Without the delay the DACs will not work properly and produces the following type of messages: Nov 15 10:09:21 orwell kernel: [ 91.342880] usb 3-13: clock source 41 is not valid, cannot use Nov 15 10:09:21 orwell kernel: [ 91.343775] usb 3-13: clock source 41 is not valid, cannot use There are likely other Marantz/Denon devices using the same USB module which exhibit the same problems. But as this cannot be verified I limited the patch to the devices I could test. The following two devices are covered by this path: - Marantz SA-14S1 - Marantz HD-DAC1 Signed-off-by:
Jurgen Kramer <gtmkramer@xs4all.nl> Signed-off-by:
-
Fabio Estevam authored
commit c251ea7b upstream. On a mx28evk with a sgtl5000 codec we notice a loud 'click' sound to happen 5 seconds after the end of a playback. The SMALL_POP bit should fix this, but its definition is incorrect: according to the sgtl5000 manual it is bit 0 of CHIP_REF_CTRL register, not bit 1. Fix the definition accordingly and enable the bit as intended per the code comment. After applying this change, no loud 'click' sound is heard after playback Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Thomas Petazzoni authored
commit 2cb1e025 upstream. In commit a1253ef6 ("ASoC: cs42l51: split i2c from codec driver"), the I2C part of the CS42L51 was moved to a separate file, but the definition of the of_device_id array was left in the driver file itself, no longer connected to the platform_driver structure using the .of_match_table pointer. This commit exports the of_device_id array in cs42l51, and uses it as .of_match_able in cs42l51-i2c.c. This solution was suggested by Brian Austin. Fixes: a1253ef6 ("ASoC: cs42l51: split i2c from codec driver") Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by:
Brian Austin <brian.austin@cirrus.com> Signed-off-by:
-
Miaoqing Pan authored
commit 4e6ce4dc upstream. Based on the reference clock, which could be 25MHz or 40MHz, AR_RTC_DERIVED_CLK is programmed differently for AR9340 and AR9550. But, when a chip reset is done, processing the initvals sets the register back to the default value. Fix this by moving the code in ath9k_hw_init_pll() to ar9003_hw_override_ini(). Also, do this override for AR9531. Signed-off-by:
Miaoqing Pan <miaoqing@qca.qualcomm.com> Signed-off-by:
Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Stanislaw Gruszka authored
commit cfd9167a upstream. RT2800 and newer hardware require padding between header and payload if header length is not multiple of 4. For historical reasons we also align payload to to 4 bytes boundary, but such alignment is not needed on modern H/W. Patch fixes skb_under_panic problems reported from time to time: https://bugzilla.kernel.org/show_bug.cgi?id=84911 https://bugzilla.kernel.org/show_bug.cgi?id=72471 http://marc.info/?l=linux-wireless&m=139108549530402&w=2 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1087591 Panic happened because we eat 4 bytes of skb headroom on each (re)transmission when sending frame without the payload and the header length not being multiple of 4 (i.e. QoS header has 26 bytes). On such case because paylad_aling=2 is bigger than header_align=0 we increase header_align by 4 bytes. To prevent that we could change the check to: if (payload_length && payload_align > header_align) header_align += 4; but not aligning payload at all is more effective and alignment is not really needed by H/W (that has been tested on OpenWrt project for few years now). Reported-and-tested-by:
Antti S. Lankila <alankila@bel.fi> Debugged-by:
Henrik Asp <solenskiner@gmail.com> Originally-From: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Ronald Wahl authored
commit 4f031fa9 upstream. Commit 7ec7c4a9 (mac80211: port CCMP to cryptoapi's CCM driver) introduced a regression when decrypting empty packets (data_len == 0). This will lead to backtraces like: (scatterwalk_start) from [<c01312f4>] (scatterwalk_map_and_copy+0x2c/0xa8) (scatterwalk_map_and_copy) from [<c013a5a0>] (crypto_ccm_decrypt+0x7c/0x25c) (crypto_ccm_decrypt) from [<c032886c>] (ieee80211_aes_ccm_decrypt+0x160/0x170) (ieee80211_aes_ccm_decrypt) from [<c031c628>] (ieee80211_crypto_ccmp_decrypt+0x1ac/0x238) (ieee80211_crypto_ccmp_decrypt) from [<c032ef28>] (ieee80211_rx_handlers+0x870/0x1d24) (ieee80211_rx_handlers) from [<c0330c7c>] (ieee80211_prepare_and_rx_handle+0x8a0/0x91c) (ieee80211_prepare_and_rx_handle) from [<c0331260>] (ieee80211_rx+0x568/0x730) (ieee80211_rx) from [<c01d3054>] (__carl9170_rx+0x94c/0xa20) (__carl9170_rx) from [<c01d3324>] (carl9170_rx_stream+0x1fc/0x320) (carl9170_rx_stream) from [<c01cbccc>] (carl9170_usb_tasklet+0x80/0xc8) (carl9170_usb_tasklet) from [<c00199dc>] (tasklet_hi_action+0x88/0xcc) (tasklet_hi_action) from [<c00193c8>] (__do_softirq+0xcc/0x200) (__do_softirq) from [<c0019734>] (irq_exit+0x80/0xe0) (irq_exit) from [<c0009c10>] (handle_IRQ+0x64/0x80) (handle_IRQ) from [<c000c3a0>] (__irq_svc+0x40/0x4c) (__irq_svc) from [<c0009d44>] (arch_cpu_idle+0x2c/0x34) Such packets can appear for example when using the carl9170 wireless driver because hardware sometimes generates garbage when the internal FIFO overruns. This patch adds an additional length check. Fixes: 7ec7c4a9 ("mac80211: port CCMP to cryptoapi's CCM driver") Acked-by:
Ronald Wahl <ronald.wahl@raritan.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Andreas Färber authored
commit 62e6a3b6 upstream. This enables the snd_soc_snow module to be auto-loaded. Signed-off-by:
Andreas Färber <afaerber@suse.de> Signed-off-by:
-
