Split tx and status path in mt76-usb module relying on mt76 workers APIs
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

In order to improve parallelism, convert rx path in mt76-usb module to
mt76 workers APIs
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Since rate configuration is run holding dev mutex, we can run key
configuration in mt7615_set_key for usb/sdio devices avoiding to
schedule the workqueue
Tested-by: Tested-by: YN Chen <yn.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Fix Tx-Rx MIC overwrite during TKIP hw key configuration

Fixes: 01cfc1b4 ("mt76: mt7615: add BIP_CMAC_128 cipher support")
Tested-by: YN Chen <yn.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Switch to wep sw crypto for mt7615/mt7915 since wtbl require a sta
reference and wep key is not pairwise
Tested-by: YN Chen <yn.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

SDIO-based WiFi would rely on an additional GPIO pin to wake up the host.
Co-developed-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Move mt76_mcu_send_firmware routine in common code since it is actually
shared between mt7615, mt7663, mt7603 and mt7915 devices
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Some newer MT7628 based routers (notably the TP-Link Archer C50 v4) are
shipped with a chip-id of 0x7600 in the on-flash EEPROM. Add this as a
possible valid ID.

Ref: https://bugs.openwrt.org/index.php?do=details&task_id=2781Suggested-by: Ron Asimi <ron.asimi@gmail.com>
Signed-off-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Run mt76_free_device instead of ieee80211_free_hw if device probing
fails in order to remove the already allocated mt76 workqueue

Fixes: a86f1d01 ("mt76: move mt76 workqueue in common code")
Fixes: f1d96236 ("mt76: mt7915: implement HE per-rate tx power support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

drivers/net/wireless/mediatek/mt76/mt7915/init.c:339:26: sparse:
sparse: cast from restricted __le16

Fixes: 00b2e16e ("mt76: mt7915: add TxBF capabilities")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Fix the following possible deadlock reported by lockdep disabling BH
running mt76_free_pending_txwi()

================================
WARNING: inconsistent lock state
5.9.0-rc6 #14 Not tainted
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
rmmod/1227 [HC0[0]:SC0[0]:HE1:SE1] takes:
ffff888156a83530 (&dev->lock#2){+.?.}-{2:2}, at: mt76_dma_cleanup+0x125/0x150 [mt76]
{IN-SOFTIRQ-W} state was registered at:
  __lock_acquire+0x20c/0x6b0
  lock_acquire+0x9d/0x220
  _raw_spin_lock+0x2c/0x70
  mt76_dma_tx_cleanup+0xc7/0x200 [mt76]
  mt76x02_poll_tx+0x31/0xb0 [mt76x02_lib]
  napi_poll+0x3a/0x100
  net_rx_action+0xa8/0x200
  __do_softirq+0xc4/0x430
  asm_call_on_stack+0xf/0x20
  do_softirq_own_stack+0x49/0x60
  irq_exit_rcu+0x9a/0xd0
  common_interrupt+0xa4/0x190
  asm_common_interrupt+0x1e/0x40
irq event stamp: 9915
hardirqs last  enabled at (9915): [<ffffffff8124e286>] __free_pages_ok+0x336/0x3b0
hardirqs last disabled at (9914): [<ffffffff8124e24e>] __free_pages_ok+0x2fe/0x3b0
softirqs last  enabled at (9912): [<ffffffffa03aa672>] mt76_dma_rx_cleanup+0xa2/0x120 [mt76]
softirqs last disabled at (9846): [<ffffffffa03aa5ea>] mt76_dma_rx_cleanup+0x1a/0x120 [mt76]

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&dev->lock#2);
  <Interrupt>
    lock(&dev->lock#2);

 *** DEADLOCK ***

1 lock held by rmmod/1227:
 #0: ffff88815b5eb240 (&dev->mutex){....}-{3:3}, at: driver_detach+0xb5/0x110

stack backtrace:
CPU: 1 PID: 1227 Comm: rmmod Kdump: loaded Not tainted 5.9.0-rc6-wdn-src+ #14
Hardware name: Dell Inc. Studio XPS 1340/0K183D, BIOS A11 09/08/2009
Call Trace:
 dump_stack+0x77/0xa0
 mark_lock_irq.cold+0x15/0x39
 mark_lock+0x1fc/0x500
 mark_usage+0xc7/0x140
 __lock_acquire+0x20c/0x6b0
 ? find_held_lock+0x2b/0x80
 ? sched_clock_cpu+0xc/0xb0
 lock_acquire+0x9d/0x220
 ? mt76_dma_cleanup+0x125/0x150 [mt76]
 _raw_spin_lock+0x2c/0x70
 ? mt76_dma_cleanup+0x125/0x150 [mt76]
 mt76_dma_cleanup+0x125/0x150 [mt76]
 mt76x2_cleanup+0x5a/0x70 [mt76x2e]
 mt76x2e_remove+0x18/0x30 [mt76x2e]
 pci_device_remove+0x36/0xa0
 __device_release_driver+0x16c/0x220
 driver_detach+0xcf/0x110
 bus_remove_driver+0x56/0xca
 pci_unregister_driver+0x36/0x80
 __do_sys_delete_module.constprop.0+0x127/0x200
 ? syscall_enter_from_user_mode+0x1d/0x50
 ? trace_hardirqs_on+0x1c/0xe0
 do_syscall_64+0x33/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7ff0da54e36b
Code: 73 01 c3 48 8b 0d 2d 0b 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d fd 0a 0c 00 f7 d8 64 89 01 48

Fixes: dd57a95c ("mt76: move txwi handling code to dma.c, since it is mmio specific")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

If THIS_MODULE is not set, the module would be removed while debugfs is
being used.
It eventually makes kernel panic.

Fixes: e57b7901 ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Avoid confusion with rx rate query function.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Update ppe_thresh capability to sync SDK setting.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

If THIS_MODULE is not set, the module would be removed while debugfs is
being used.
It eventually makes kernel panic.

Fixes: ec9742a8 ("mt76: mt7915: add .sta_add_debugfs support")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <apais@linux.microsoft.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

sched quota is now updated in mt7663s_txrx_worker so there is no more
need of sched.lock mutex
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Properly account current consumed ple quota in mt7663s_tx_pick_quota
routine and avoid possible underflow.

Fixes: 6ef2d665 ("mt76: mt7663s: split mt7663s_tx_update_sched in mt7663s_tx_{pick,update}_quota")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Get rid of mt7663s_sta_add routine and rely on mt7615_mac_sta_add
since sched quota is already initialized in mt7663s_mcu_init_sched
routine
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Add sched_quota debugfs node for mt7663s. Scheduling quota stats
are useful for debugging
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

In order to reduce cpu cycles, enable hw beacon filter by default if
the device is running offload fw with sta only interfaces.
Disable runtime pm for multi-vif scenario.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

It was accidentally dropped while adding multiple wiphy support
Fixes fast-rx support and avoids handling reordering in both mac80211
and the driver

Cc: stable@vger.kernel.org
Fixes: c89d3625 ("mt76: add function for allocating an extra wiphy")
Signed-off-by: Felix Fietkau <nbd@nbd.name>

When per-packet rate reporting is enabled, the hardware can get stuck under
some conditions. It self-recovers quickly, but in practice this leads to
reduced performance.
In order to avoid running into this issue, disable per-packet rate reporting
by default and query the rx rate from firmware instead, unless monitor mode
is enabled.
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Use the new mt76_mcu_send_and_get_msg function
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Can be used by the caller to get the response data directly instead of using the
hack of storing the result in internal data structures from .mcu_parse_response
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Reduces code duplication
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Remove it from mt7615 and mt7915 and implement it in core code instead
Signed-off-by: Felix Fietkau <nbd@nbd.name>

This removes some code duplication and prepares the code for making
the MCU API more flexible
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Preparation for further cleanup
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Do not free skb inside that function
Preparation for further cleanup
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Preparation for further cleanup
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Preparation for further cleanup
Signed-off-by: Felix Fietkau <nbd@nbd.name>

The feature is not ready in firmware yet, and it leads to hangs
Signed-off-by: Felix Fietkau <nbd@nbd.name>

The firmware/hardware supports only 16 entries. Trying to use more can lead
to timeouts on some firmware versions
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Slightly improves performance
Signed-off-by: Felix Fietkau <nbd@nbd.name>

In the MT7915 info, the fields for the WLAN index / queue overlap with the
token id, and the MT_TX_FREE_PAIR bit indicates, which one is present.

If MT_TX_FREE_PAIR is set, skip processing the token index, since the data
will not be valid.

This fixes accidentally freeing tokens which are still in use by the
hardware with a wrong station pointer.
Signed-off-by: Felix Fietkau <nbd@nbd.name>

When looking for a MAC address slot, start by using main BSSID slots 1-3,
afterwards use 16 repeater mode BSSID slots, then start using the slots
usually used for AP mode.
This search order should prevent unnecessary conflicts with AP mode interfaces
on the same PHY
Signed-off-by: Felix Fietkau <nbd@nbd.name>

The newer chipsets can deal with the same STA on multiple interfaces
Preparation for supporting more station interfaces
Signed-off-by: Felix Fietkau <nbd@nbd.name>

This is primarily for testing and can be used in combination with monitor
mode to make the card respond to packets sent to a specific MAC address.
For now this is only exposed as a debug/testing feature, later on the
approach might be used to support more concurrent station interfaces
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Improves icache footprint
Signed-off-by: Felix Fietkau <nbd@nbd.name>