- 07 Jun, 2014 40 commits
-
-
Grant Likely authored
commit 58b116bc upstream. When the kernel is built with CONFIG_PREEMPT it is possible to reach a state when all modules loaded but some driver still stuck in the deferred list and there is a need for external event to kick the deferred queue to probe these drivers. The issue has been observed on embedded systems with CONFIG_PREEMPT enabled, audio support built as modules and using nfsroot for root filesystem. The following log fragment shows such sequence when all audio modules were loaded but the sound card is not present since the machine driver has failed to probe due to missing dependency during it's probe. The board is am335x-evmsk (McASP<->tlv320aic3106 codec) with davinci-evm machine driver: ... [ 12.615118] davinci-mcasp 4803c000.mcasp: davinci_mcasp_probe: ENTER [ 12.719969] davinci_evm sound.3: davinci_evm_probe: ENTER [ 12.725753] davinci_evm sound.3: davinci_evm_probe: snd_soc_register_card [ 12.753846] davinci-mcasp 4803c000.mcasp: davinci_mcasp_probe: snd_soc_register_component [ 12.922051] davinci-mcasp 4803c000.mcasp: davinci_mcasp_probe: snd_soc_register_component DONE [ 12.950839] davinci_evm sound.3: ASoC: platform (null) not registered [ 12.957898] davinci_evm sound.3: davinci_evm_probe: snd_soc_register_card DONE (-517) [ 13.099026] davinci-mcasp 4803c000.mcasp: Kicking the deferred list [ 13.177838] davinci-mcasp 4803c000.mcasp: really_probe: probe_count = 2 [ 13.194130] davinci_evm sound.3: snd_soc_register_card failed (-517) [ 13.346755] davinci_mcasp_driver_init: LEAVE [ 13.377446] platform sound.3: Driver davinci_evm requests probe deferral [ 13.592527] platform sound.3: really_probe: probe_count = 0 In the log the machine driver enters it's probe at 12.719969 (this point it has been removed from the deferred lists). McASP driver already executing it's probing (since 12.615118). The machine driver tries to construct the sound card (12.950839) but did not found one of the components so it fails. After this McASP driver registers all the ASoC components (the machine driver still in it's probe function after it failed to construct the card) and the deferred work is prepared at 13.099026 (note that this time the machine driver is not in the lists so it is not going to be handled when the work is executing). Lastly the machine driver exit from it's probe and the core places it to the deferred list but there will be no other driver going to load and the deferred queue is not going to be kicked again - till we have external event like connecting USB stick, etc. The proposed solution is to try the deferred queue once more when the last driver is asking for deferring and we had drivers loaded while this last driver was probing. This way we can avoid drivers stuck in the deferred queue. Signed-off-by:
Grant Likely <grant.likely@linaro.org> Reviewed-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Brown <broonie@kernel.org> Signed-off-by:
-
Josef Gajdusek authored
commit 3a18e139 upstream. The datasheet for EMC1413/EMC1414, which is fully compatible to EMC1403/1404 and uses the same chip identification, references revision numbers 0x01, 0x03, and 0x04. Accept the full range of revision numbers from 0x01 to 0x04 to make sure none are missed. Signed-off-by:
Josef Gajdusek <atx@atx.name> [Guenter Roeck: Updated headline and description] Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Josef Gajdusek authored
commit 17c048fc upstream. Attempts to set the hysteresis value to a temperature below the target limit fails with "write error: Numerical result out of range" due to an inverted comparison. Signed-off-by:
Jean Delvare <jdelvare@suse.de> [Guenter Roeck: Updated headline and description] Signed-off-by:
-
Chen Yucong authored
commit b985194c upstream. For handling a free hugepage in memory failure, the race will happen if another thread hwpoisoned this hugepage concurrently. So we need to check PageHWPoison instead of !PageHWPoison. If hwpoison_filter(p) returns true or a race happens, then we need to unlock_page(hpage). Signed-off-by:
Chen Yucong <slaoub@gmail.com> Reviewed-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Tested-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Anthony Iliopoulos authored
commit 9844f546 upstream. The invalidation is required in order to maintain proper semantics under CoW conditions. In scenarios where a process clones several threads, a thread operating on a core whose DTLB entry for a particular hugepage has not been invalidated, will be reading from the hugepage that belongs to the forked child process, even after hugetlb_cow(). The thread will not see the updated page as long as the stale DTLB entry remains cached, the thread attempts to write into the page, the child process exits, or the thread gets migrated to a different processor. Signed-off-by:
Anthony Iliopoulos <anthony.iliopoulos@huawei.com> Link: http://lkml.kernel.org/r/20140514092948.GA17391@server-36.huawei.corpSuggested-by:
Shay Goikhman <shay.goikhman@huawei.com> Acked-by:
Dave Hansen <dave.hansen@intel.com> Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Corey Minyard authored
commit eb6d78ec upstream. The OBF timer in KCS was not reset in one situation when error recovery was started, resulting in an immediate timeout. Reported-by:
Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Bodo Stroesser authored
commit 48e8ac29 upstream. With recent changes it is possible for the timer handler to detect an idle interface and not start the timer, but the thread to start an operation at the same time. The thread will not start the timer in that instance, resulting in the timer not running. Instead, move all timer operations under the lock and start the timer in the thread if it detect non-idle and the timer is not already running. Moving under locks allows the last timeout to be set in both the thread and the timer. 'Timer is not running' means that the timer is not pending and smi_timeout() is not running. So we need a flag to detect this correctly. Also fix a few other timeout bugs: setting the last timeout when the interrupt has to be disabled and the timer started, and setting the last timeout in check_start_timer_thread possibly racing with the timer Signed-off-by:
-
Jiri Bohac authored
commit 98a01e77 upstream. On architectures with sizeof(int) < sizeof (long), the computation of mask inside apply_slack() can be undefined if the computed bit is > 32. E.g. with: expires = 0xffffe6f5 and slack = 25, we get: expires_limit = 0x20000000e bit = 33 mask = (1 << 33) - 1 /* undefined */ On x86, mask becomes 1 and and the slack is not applied properly. On s390, mask is -1, expires is set to 0 and the timer fires immediately. Use 1UL << bit to solve that issue. Suggested-by:
Deborah Townsend <dstownse@us.ibm.com> Signed-off-by:
Jiri Bohac <jbohac@suse.cz> Link: http://lkml.kernel.org/r/20140418152310.GA13654@midget.suse.czSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Linus Torvalds authored
commit 1b17844b upstream. fixup_user_fault() is used by the futex code when the direct user access fails, and the futex code wants it to either map in the page in a usable form or return an error. It relied on handle_mm_fault() to map the page, and correctly checked the error return from that, but while that does map the page, it doesn't actually guarantee that the page will be mapped with sufficient permissions to be then accessed. So do the appropriate tests of the vma access rights by hand. [ Side note: arguably handle_mm_fault() could just do that itself, but we have traditionally done it in the caller, because some callers - notably get_user_pages() - have been able to access pages even when they are mapped with PROT_NONE. Maybe we should re-visit that design decision, but in the meantime this is the minimal patch. ] Found by Dave Jones running his trinity tool. Reported-by:
Dave Jones <davej@redhat.com> Acked-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
commit 27aa64b9 upstream. Add missing clk_put() call to ata_host_activate() failure path. Sergei says, "Hm, I have once fixed that (see that *if* (!ret)) but looks like a later commit 477c87e9 (ARM: at91/pata: use gpio_is_valid to check the gpio) broke it again. :-( Would be good if the changelog did mention that..." Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit a949ae56 upstream. A race exists between module loading and enabling of function tracer. CPU 1 CPU 2 ----- ----- load_module() module->state = MODULE_STATE_COMING register_ftrace_function() mutex_lock(&ftrace_lock); ftrace_startup() update_ftrace_function(); ftrace_arch_code_modify_prepare() set_all_module_text_rw(); <enables-ftrace> ftrace_arch_code_modify_post_process() set_all_module_text_ro(); [ here all module text is set to RO, including the module that is loading!! ] blocking_notifier_call_chain(MODULE_STATE_COMING); ftrace_init_module() [ tries to modify code, but it's RO, and fails! ftrace_bug() is called] When this race happens, ftrace_bug() will produces a nasty warning and all of the function tracing features will be disabled until reboot. The simple solution is to treate module load the same way the core kernel is treated at boot. To hardcode the ftrace function modification of converting calls to mcount into nops. This is done in init/main.c there's no reason it could not be done in load_module(). This gives a better control of the changes and doesn't tie the state of the module to its notifiers as much. Ftrace is special, it needs to be treated as such. The reason this would work, is that the ftrace_module_init() would be called while the module is in MODULE_STATE_UNFORMED, which is ignored by the set_all_module_text_ro() call. Link: http://lkml.kernel.org/r/1395637826-3312-1-git-send-email-indou.takao@jp.fujitsu.comReported-by:
Takao Indoh <indou.takao@jp.fujitsu.com> Acked-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Thomas Gleixner authored
commit f0d71b3d upstream. We happily allow userspace to declare a random kernel thread to be the owner of a user space PI futex. Found while analysing the fallout of Dave Jones syscall fuzzer. We also should validate the thread group for private futexes and find some fast way to validate whether the "alleged" owner has RW access on the file which backs the SHM, but that's a separate issue. Signed-off-by:
-
Thomas Gleixner authored
commit 866293ee upstream. Dave Jones trinity syscall fuzzer exposed an issue in the deadlock detection code of rtmutex: http://lkml.kernel.org/r/20140429151655.GA14277@redhat.com That underlying issue has been fixed with a patch to the rtmutex code, but the futex code must not call into rtmutex in that case because - it can detect that issue early - it avoids a different and more complex fixup for backing out If the user space variable got manipulated to 0x80000000 which means no lock holder, but the waiters bit set and an active pi_state in the kernel is found we can figure out the recursive locking issue by looking at the pi_state owner. If that is the current task, then we can safely return -EDEADLK. The check should have been added in commit 59fa6245 (futex: Handle futex_pi OWNER_DIED take over correctly) already, but I did not see the above issue caused by user space manipulation back then. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit e33d0ba8 ] Recycling skb always had been very tough... This time it appears GRO layer can accumulate skb->truesize adjustments made by drivers when they attach a fragment to skb. skb_gro_receive() can only subtract from skb->truesize the used part of a fragment. I spotted this problem seeing TcpExtPruneCalled and TcpExtTCPRcvCollapsed that were unexpected with a recent kernel, where TCP receive window should be sized properly to accept traffic coming from a driver not overshooting skb->truesize. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Alexander Duyck authored
[ Upstream commit ec47ea82 ] With the recent changes for how we compute the skb truesize it occurs to me we are probably going to have a lot of calls to skb_end_pointer - skb->head. Instead of running all over the place doing that it would make more sense to just make it a separate inline skb_end_offset(skb) that way we can return the correct value without having gcc having to do all the optimization to cancel out skb->head - skb->head. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Acked-by:
-
Li RongQing authored
[ Upstream commit fbdc0ad0 ] the value of itag is a random value from stack, and may not be initiated by fib_validate_source, which called fib_combine_itag if CONFIG_IP_ROUTE_CLASSID is not set This will make the cached dst uncertainty Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
Jason Wang authored
[ Upstream commit 16c0b164 ] We drop packet unconditionally when we fail to mirror it. This is not intended in some cases. Consdier for kvm guest, we may mirror the traffic of the bridge to a tap device used by a VM. When kernel fails to mirror the packet in conditions such as when qemu crashes or stop polling the tap, it's hard for the management software to detect such condition and clean the the mirroring before. This would lead all packets to the bridge to be dropped and break the netowrk of other virtual machines. To solve the issue, the patch does not drop packets when kernel fails to mirror it, and only drop the redirected packets. Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Sergey Popovich authored
[ Upstream commit aeefa1ec ] Increment fib_info_cnt in fib_create_info() right after successfuly alllocating fib_info structure, overwise fib_metrics allocation failure leads to fib_info_cnt incorrectly decremented in free_fib_info(), called on error path from fib_create_info(). Signed-off-by:
Sergey Popovich <popovich_sergei@mail.ru> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit ca6c5d4a ] local_df means 'ignore DF bit if set', so if its set we're allowed to perform ip fragmentation. This wasn't noticed earlier because the output path also drops such skbs (and emits needed icmp error) and because netfilter ip defrag did not set local_df until couple of days ago. Only difference is that DF-packets-larger-than MTU now discarded earlier (f.e. we avoid pointless netfilter postrouting trip). While at it, drop the repeated test ip_exceeds_mtu, checking it once is enough... Fixes: fe6cc55f ("net: ip, ipv6: handle gso skbs in forwarding path") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Liu Yu authored
[ Upstream commit 0cda345d ] commit b9f47a3a (tcp_cubic: limit delayed_ack ratio to prevent divide error) try to prevent divide error, but there is still a little chance that delayed_ack can reach zero. In case the param cnt get negative value, then ratio+cnt would overflow and may happen to be zero. As a result, min(ratio, ACK_RATIO_LIMIT) will calculate to be zero. In some old kernels, such as 2.6.32, there is a bug that would pass negative param, which then ultimately leads to this divide error. commit 5b35e1e6 (tcp: fix tcp_trim_head() to adjust segment count with skb MSS) fixed the negative param issue. However, it's safe that we fix the range of delayed_ack as well, to make sure we do not hit a divide by zero. CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
Liu Yu <allanyuliu@tencent.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Vlad Yasevich authored
[ Upstream commit f114890c ] This reverts commit 12a2856b. The commit above doesn't appear to be necessary any more as the checksums appear to be correctly computed/validated. Additionally the above commit breaks kvm configurations where one VM is using a device that support checksum offload (virtio) and the other VM does not. In this case, packets leaving virtio device will have CHECKSUM_PARTIAL set. The packets is forwarded to a macvtap that has offload features turned off. Since we use CHECKSUM_UNNECESSARY, the host does does not update the checksum and thus a bad checksum is passed up to the guest. CC: Daniel Lezcano <daniel.lezcano@free.fr> CC: Patrick McHardy <kaber@trash.net> CC: Andrian Nord <nightnord@gmail.com> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Michael S. Tsirkin <mst@redhat.com> CC: Jason Wang <jasowang@redhat.com> Signed-off-by:
Vlad Yasevich <vyasevic@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
-
David Gibson authored
[ Upstream commit c53864fd ] Since 115c9b81 (rtnetlink: Fix problem with buffer allocation), RTM_NEWLINK messages only contain the IFLA_VFINFO_LIST attribute if they were solicited by a GETLINK message containing an IFLA_EXT_MASK attribute with the RTEXT_FILTER_VF flag. That was done because some user programs broke when they received more data than expected - because IFLA_VFINFO_LIST contains information for each VF it can become large if there are many VFs. However, the IFLA_VF_PORTS attribute, supplied for devices which implement ndo_get_vf_port (currently the 'enic' driver only), has the same problem. It supplies per-VF information and can therefore become large, but it is not currently conditional on the IFLA_EXT_MASK value. Worse, it interacts badly with the existing EXT_MASK handling. When IFLA_EXT_MASK is not supplied, the buffer for netlink replies is fixed at NLMSG_GOODSIZE. If the information for IFLA_VF_PORTS exceeds this, then rtnl_fill_ifinfo() returns -EMSGSIZE on the first message in a packet. netlink_dump() will misinterpret this as having finished the listing and omit data for this interface and all subsequent ones. That can cause getifaddrs(3) to enter an infinite loop. This patch addresses the problem by only supplying IFLA_VF_PORTS when IFLA_EXT_MASK is supplied with the RTEXT_FILTER_VF flag set. Signed-off-by:
David Gibson <david@gibson.dropbear.id.au> Reviewed-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
David Gibson authored
[ Upstream commit 973462bb ] Without IFLA_EXT_MASK specified, the information reported for a single interface in response to RTM_GETLINK is expected to fit within a netlink packet of NLMSG_GOODSIZE. If it doesn't, however, things will go badly wrong, When listing all interfaces, netlink_dump() will incorrectly treat -EMSGSIZE on the first message in a packet as the end of the listing and omit information for that interface and all subsequent ones. This can cause getifaddrs(3) to enter an infinite loop. This patch won't fix the problem, but it will WARN_ON() making it easier to track down what's going wrong. Signed-off-by:
Jiri Pirko <jpirko@redhat.com> Signed-off-by:
-
Ivan Vecera authored
The patch fixes a problem with dropped jumbo frames after usage of 'ethtool -G ... rx'. Scenario: 1. ip link set eth0 up 2. ethtool -G eth0 rx N # <- This zeroes rx-jumbo 3. ip link set mtu 9000 dev eth0 The ethtool command set rx_jumbo_pending to zero so any received jumbo packets are dropped and you need to use 'ethtool -G eth0 rx-jumbo N' to workaround the issue. The patch changes the logic so rx_jumbo_pending value is changed only if jumbo frames are enabled (MTU > 1500). Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Acked-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Mathias Krause authored
[ Upstream commit 05ab8f26 ] The BPF_S_ANC_NLATTR and BPF_S_ANC_NLATTR_NEST extensions fail to check for a minimal message length before testing the supplied offset to be within the bounds of the message. This allows the subtraction of the nla header to underflow and therefore -- as the data type is unsigned -- allowing far to big offset and length values for the search of the netlink attribute. The remainder calculation for the BPF_S_ANC_NLATTR_NEST extension is also wrong. It has the minuend and subtrahend mixed up, therefore calculates a huge length value, allowing to overrun the end of the message while looking for the netlink attribute. The following three BPF snippets will trigger the bugs when attached to a UNIX datagram socket and parsing a message with length 1, 2 or 3. ,-[ PoC for missing size check in BPF_S_ANC_NLATTR ]-- | ld #0x87654321 | ldx #42 | ld #nla | ret a `--- ,-[ PoC for the same bug in BPF_S_ANC_NLATTR_NEST ]-- | ld #0x87654321 | ldx #42 | ld #nlan | ret a `--- ,-[ PoC for wrong remainder calculation in BPF_S_ANC_NLATTR_NEST ]-- | ; (needs a fake netlink header at offset 0) | ld #0 | ldx #42 | ld #nlan | ret a `--- Fix the first issue by ensuring the message length fulfills the minimal size constrains of a nla header. Fix the second bug by getting the math for the remainder calculation right. Fixes: 4738c1db ("[SKFILTER]: Add SKF_ADF_NLATTR instruction") Fixes: d214c753 ("filter: add SKF_AD_NLATTR_NEST to look for nested..") Cc: Patrick McHardy <kaber@trash.net> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Mathias Krause <minipli@googlemail.com> Acked-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
-
Wang, Xiaoming authored
[ Upstream commit b04c4619 ] Plug a group_info refcount leak in ping_init. group_info is only needed during initialization and the code failed to release the reference on exit. While here move grabbing the reference to a place where it is actually needed. Signed-off-by:
Chuansheng Liu <chuansheng.liu@intel.com> Signed-off-by:
Zhang Dongxing <dongxing.zhang@intel.com> Signed-off-by:
xiaoming wang <xiaoming.wang@intel.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 30f78d8e ] Francois reported that setting big mtu on loopback device could prevent tcp sessions making progress. We do not support (yet ?) IPv6 Jumbograms and cook corrupted packets. We must limit the IPv6 MTU to (65535 + 40) bytes in theory. Tested: ifconfig lo mtu 70000 netperf -H ::1 Before patch : Throughput : 0.05 Mbits After patch : Throughput : 35484 Mbits Reported-by:
Francois WELLENREITER <f.wellenreiter@gmail.com> Signed-off-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Thomas Richter authored
[ Upstream commit db298686 ] Remove the bonding debug_fs entries when the module initialization fails. The debug_fs entries should be removed together with all other already allocated resources. Signed-off-by:
Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by:
Jay Vosburgh <j.vosburgh@gmail.com> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 6d39d589 ] In case of tcp, gso_size contains the tcpmss. For UFO (udp fragmentation offloading) skbs, gso_size is the fragment payload size, i.e. we must not account for udp header size. Otherwise, when using virtio drivers, a to-be-forwarded UFO GSO packet will be needlessly fragmented in the forward path, because we think its individual segments are too large for the outgoing link. Fixes: fe6cc55f ("net: ip, ipv6: handle gso skbs in forwarding path") Cc: Eric Dumazet <eric.dumazet@gmail.com> Reported-by:
Tobias Brunner <tobias@strongswan.org> Signed-off-by:
-
Dmitry Petukhov authored
[ Upstream commit f34c4a35 ] When l2tp driver tries to get PMTU for the tunnel destination, it uses the pointer to struct sock that represents PPPoX socket, while it should use the pointer that represents UDP socket of the tunnel. Signed-off-by:
Dmitry Petukhov <dmgenp@gmail.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 1e1cdf8a ] In function sctp_wake_up_waiters(), we need to involve a test if the association is declared dead. If so, we don't have any reference to a possible sibling association anymore and need to invoke sctp_write_space() instead, and normally walk the socket's associations and notify them of new wmem space. The reason for special casing is that otherwise, we could run into the following issue when a sctp_primitive_SEND() call from sctp_sendmsg() fails, and tries to flush an association's outq, i.e. in the following way: sctp_association_free() `-> list_del(&asoc->asocs) <-- poisons list pointer asoc->base.dead = true sctp_outq_free(&asoc->outqueue) `-> __sctp_outq_teardown() `-> sctp_chunk_free() `-> consume_skb() `-> sctp_wfree() `-> sctp_wake_up_waiters() <-- dereferences poisoned pointers if asoc->ep->sndbuf_policy=0 Therefore, only walk the list in an 'optimized' way if we find that the current association is still active. We could also use list_del_init() in addition when we call sctp_association_free(), but as Vlad suggests, we want to trap such bugs and thus leave it poisoned as is. Why is it safe to resolve the issue by testing for asoc->base.dead? Parallel calls to sctp_sendmsg() are protected under socket lock, that is lock_sock()/release_sock(). Only within that path under lock held, we're setting skb/chunk owner via sctp_set_owner_w(). Eventually, chunks are freed directly by an association still under that lock. So when traversing association list on destruction time from sctp_wake_up_waiters() via sctp_wfree(), a different CPU can't be running sctp_wfree() while another one calls sctp_association_free() as both happens under the same lock. Therefore, this can also not race with setting/testing against asoc->base.dead as we are guaranteed for this to happen in order, under lock. Further, Vlad says: the times we check asoc->base.dead is when we've cached an association pointer for later processing. In between cache and processing, the association may have been freed and is simply still around due to reference counts. We check asoc->base.dead under a lock, so it should always be safe to check and not race against sctp_association_free(). Stress-testing seems fine now, too. Fixes: cd253f9f357d ("net: sctp: wake up all assocs if sndbuf policy is per socket") Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
-
Daniel Borkmann authored
[ Upstream commit 52c35bef ] SCTP charges chunks for wmem accounting via skb->truesize in sctp_set_owner_w(), and sctp_wfree() respectively as the reverse operation. If a sender runs out of wmem, it needs to wait via sctp_wait_for_sndbuf(), and gets woken up by a call to __sctp_write_space() mostly via sctp_wfree(). __sctp_write_space() is being called per association. Although we assign sk->sk_write_space() to sctp_write_space(), which is then being done per socket, it is only used if send space is increased per socket option (SO_SNDBUF), as SOCK_USE_WRITE_QUEUE is set and therefore not invoked in sock_wfree(). Commit 4c3a5bda ("sctp: Don't charge for data in sndbuf again when transmitting packet") fixed an issue where in case sctp_packet_transmit() manages to queue up more than sndbuf bytes, sctp_wait_for_sndbuf() will never be woken up again unless it is interrupted by a signal. However, a still remaining issue is that if net.sctp.sndbuf_policy=0, that is accounting per socket, and one-to-many sockets are in use, the reclaimed write space from sctp_wfree() is 'unfairly' handed back on the server to the association that is the lucky one to be woken up again via __sctp_write_space(), while the remaining associations are never be woken up again (unless by a signal). The effect disappears with net.sctp.sndbuf_policy=1, that is wmem accounting per association, as it guarantees a fair share of wmem among associations. Therefore, if we have reclaimed memory in case of per socket accounting, wake all related associations to a socket in a fair manner, that is, traverse the socket association list starting from the current neighbour of the association and issue a __sctp_write_space() to everyone until we end up waking ourselves. This guarantees that no association is preferred over another and even if more associations are taken into the one-to-many session, all receivers will get messages from the server and are not stalled forever on high load. This setting still leaves the advantage of per socket accounting in touch as an association can still use up global limits if unused by others. Fixes: 4eb701df ("[SCTP] Fix SCTP sendbuffer accouting.") Signed-off-by:
-
Oleg Nesterov authored
[ Upstream commit 008208c6 ] Add two trivial helpers list_next_entry() and list_prev_entry(), they can have a lot of users including list.h itself. In fact the 1st one is already defined in events/core.c and bnx2x_sp.c, so the patch simply moves the definition to list.h. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
Alex Deucher authored
commit 16086279 upstream. This needs to be done to update some of the fields in the connector structure used by the audio code. Noticed by several users on irc. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Christopher Friedt authored
commit aa6de142 upstream. Previously, the vmwgfx_fb driver would allow users to call FBIOSET_VINFO, but it would not adjust the FINFO properly, resulting in distorted screen rendering. The patch corrects that behaviour. See https://bugs.gentoo.org/show_bug.cgi?id=494794 for examples. Signed-off-by:
Christopher Friedt <chrisfriedt@gmail.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Bjørn Mork authored
commit 34f972d6 upstream. A number of older CMOTech modems are based on Qualcomm chips. The blacklisted interfaces are QMI/wwan. Reported-by:
Lars Melin <larsm17@gmail.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Bjørn Mork authored
commit dd6b48ec upstream. Device interface layout: 0: ff/ff/ff - serial 1: ff/00/00 - serial AT+PPP 2: ff/ff/ff - QMI/wwan 3: 08/06/50 - storage Signed-off-by:
-
Bjørn Mork authored
commit 533b3994 upstream. Device interface layout: 0: ff/ff/ff - serial 1: ff/ff/ff - serial AT+PPP 2: 08/06/50 - storage 3: ff/ff/ff - serial 4: ff/ff/ff - QMI/wwan Reported-by:
Julio Araujo <julio.araujo@wllctel.com.br> Signed-off-by:
-
Johan Hovold authored
commit 5509076d upstream. During firmware download the device expects memory addresses in big-endian byte order. As the wIndex parameter which hold the address is sent in little-endian byte order regardless of host byte order, we need to use swab16 rather than cpu_to_be16. Also make sure to handle the struct ti_i2c_desc size parameter which is returned in little-endian byte order. Reported-by:
Ludovic Drolez <ldrolez@debian.org> Tested-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
-
Johan Hovold authored
commit 2e01280d upstream. This reverts commit 1ebca9da. This device was erroneously added to the sierra driver even though it's not a Sierra device and was already handled by the option driver. Cc: Richard Farina <sidhayn@gmail.com> Signed-off-by:
-
