- 15 Sep, 2023 38 commits
-
-
Colin Ian King authored
Don't populate the const array controls on the stack, instead make it static. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230915092639.31074-1-colin.i.king@gmail.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Arun T authored
Initial support for ARL w/ RT711 Signed-off-by:
Arun T <arun.t@intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20230915080635.1619942-1-yung-chuan.liao@linux.intel.comSigned-off-by:
-
Mark Brown authored
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: If the copier supports a single format on the DAI side we should fixup the BE dailink to use this single format.
-
Mark Brown authored
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>: Rather than keeping a single array of CPU dai link components allocate a smaller one for each DAI link, this reduces the amount of state that needs to be passed back and forth in the driver.
-
Mark Brown authored
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: This series implements support for split library loading to comply with the HDA DMA programming sequence recommendation, which is: 1. DSP side DMA programming and GEN bit set to 1 2. host side DMA programming and RUN bit set to 1 The SOF support for library loading is based on this sequence, backwards compatibility with older reference firmware is supported (where only the LOAD_LIBRARY message is supported).
-
Mark Brown authored
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>: These 3 patches update the pm_ops for I2C/SPI so that they are only built and exported if they are needed.
-
Mark Brown authored
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>: Some cleanups from Brent Lu for I2S platforms. And minor additions for RVPs and Chromebooks.
-
Brent Lu authored
Use ssp-common module to detect codec and amplifier type in driver probe function and remove all quirks about amplifier type. Signed-off-by:
Brent Lu <brent.lu@intel.com> Reviewed-by:
-
Brent Lu authored
This configuration supports ADL boards which implement DA7219 on SSP0 and MAX98360A on SSP1. DA7219 uses PLL bypass mode to avoid WCLK locking problem. To use this mode, MCLK frequency must be 12.288 or 24.576MHz. Signed-off-by:
-
Brent Lu authored
Use maxim-common module to handle speaker amp DAI link registration. No functional change in this commit. Signed-off-by:
-
Brent Lu authored
Rename the driver file and kernel option to be consistent with other SOF machine drivers. Signed-off-by:
-
Brent Lu authored
Use realtek-common module to support rt1019p speaker amplifier. Signed-off-by:
-
Brent Lu authored
Use nuvoton-common module to support nau8318 speaker amplifier. Signed-off-by:
-
Brent Lu authored
Implement nau8318 support code in this common module so it could be shared between multiple SOF machine drivers. Signed-off-by:
-
Brent Lu authored
A BE DAI link for speaker amplifier is always created even a board quirk specifies there is no amplifier. Modify the driver to check amplifier type before creating corresponding DAI link. The topology (sof-tgl-rt1308-hdmi-ssp.m4) which supports HDMI-IN is using fixed BE ID for each DAI link. Therefore we also uses fixed ID in machine driver side. Signed-off-by:
Balamurugan C <balamurugan.c@intel.com> Signed-off-by:
-
Balamurugan C authored
Added HDMI-in capture support for RPL boards. previously it used adl machines and now its moved into separate match entry. Signed-off-by:
-
Brent Lu authored
This configuration supports ADL boards which implement ALC5650 dual I2S interface codec. Two DAI links are added: AIF1 (on codec side) for headphone and AIF2 for speakers. Signed-off-by:
-
Uday M Bhat authored
For all MTL/Rex devices, number of HDMI supported is 3. Signed-off-by:
Yong Zhi <yong.zhi@intel.com> Signed-off-by:
Uday M Bhat <uday.m.bhat@intel.com> Reviewed-by:
-
Uday M Bhat authored
System firmware has included additional audio DMI string MAX98360_ALC5682I_DISCRETE_I2S_BT for discrete BT offload supporting devices. Same DMI string match is introduced in sof_rt5682_quirk_table. Signed-off-by:
-
Brent Lu authored
Use ssp-common module to detect codec and amplifier type in driver probe function and remove all quirks about codec and amplifier type. Signed-off-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
-
Brent Lu authored
Use ssp-common module to detect codec and amplifier type in driver probe function and remove all quirks about codec and amplifier type. Signed-off-by:
-
Brent Lu authored
Use ssp-common module to detect codec and amplifier type in driver probe function and remove all quirks about codec and amplifier type. Signed-off-by:
-
Brent Lu authored
Use ssp-common module to detect codec and amplifier type in driver probe function and remove all quirks about codec and amplifier type. Due to codec detection feature, we could remove HP Dooly's DMI quirk safely. Signed-off-by:
-
Brent Lu authored
Use ACPI HID definition in ssp-common header for device name macros. No functional change here. Signed-off-by:
-
Brent Lu authored
Create a new common module to host functions which could be shared among SSP machine drivers. Add functions to detect headphone codec and speaker amplifier via ACPI system at runtime in order to remove codec type quirks in machine drivers. Signed-off-by:
-
Brent Lu authored
Remove SOF_RT5682_MCLK_24MHZ flag from JSL and CML/WHL board configs since the information could be retrieved from SOF API. The macro itself is removed as well. Signed-off-by:
-
Charles Keepax authored
Rather than incrementing the ID for the dai_links in many places throughout the code, just increment it each time we initialise a new DAI link. Signed-off-by:
-
Charles Keepax authored
Now only the SoundWire part of the code uses the global cpus array, remove it and have create_sdw_dailink allocate its own link components. This removes a lot of state being passed around in the driver, which simplifies things a fair bit. Signed-off-by:
-
Charles Keepax authored
The code contains a fair amount of state tracking and one part of that is keeping track of which entry in the large global cpus snd_soc_dai_link_component array is currently in use. Add a helper function to allocate a simple DAI link, this simplifies the code slightly and moves us in the direction of eliminating the need for the large global cpus array. This does slightly increase the number of allocations done, but this is probe time and the code already does a large number of allocations so this increase is small over all. Signed-off-by:
-
Charles Keepax authored
Whilst it should not cause any issues as only a single instance of the machine will be instantiated, it is still slightly better practice to keep working data in the private data structure, rather than a global variable. Move sdw_pin_index into the mc_private structure. Signed-off-by:
-
Takashi Iwai authored
The compile warning with -Wformat-truncation at sdw_amd_scan_controller() is false-positive; the max loop size is AMD_SDW_MAX_MANAGERS (= 2), hence it fits with the given size. For suppressing the warning, replace snprintf() with scnprintf(). As stated in the above, truncation doesn't matter. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20230915082207.26200-1-tiwai@suse.deSigned-off-by:
-
Shuming Fan authored
This patch adds a control that there are four options to control the digital volume output. The user could select "immediate" to make volume updates immediately. In default, the driver selects the volume update with "zero detection + soft inc/dec change". Signed-off-by:
Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20230915020530.83452-1-shumingf@realtek.comSigned-off-by:
-
Peter Ujfalusi authored
There is a certain sequence needs to be followed when configuring the HDA DMA in host and DSP. The firmware provides a way to handle this two stage sequencing by splitting the library loading into two stage: 1st stage: LOAD_LIBRARY_PREPARE message the lib_id is 0, used to configure the DMA on DSP side 2nd stage: LOAD_LIBRARY message both dma_id and lib_id is valid, used for the actual transfer of the library In case a firmware without support for this two stage loading is used then the second stage message will trigger the loading and the first stage will return with error, which is ignored by the kernel. Signed-off-by:Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by:
Chao Song <chao.song@linux.intel.com> Link: https://lore.kernel.org/r/20230915114018.1701-5-peter.ujfalusi@linux.intel.comSigned-off-by:
-
Peter Ujfalusi authored
On Intel platforms there is a strict order requirement for the DMA programming: DSP side configures the buffer and sets the GEN bit Host side sets the RUN bit. In order to follow this flow, a new global message type has been added to prepare the DSP side of the DMA: host sends LOAD_LIBRARY_PREPARE with the dma_id DSP side sets its buffer and sets the GEN bit Host sets the RUN bit Host sends LOAD_LIBRARY with dma_id and lib_id DSP receives the library data. It is up to the platform code to use the new prepare stage message and how to handle the reply to it from the firmware, which can indicate that the message type is not supported/handled. In this case the kernel should proceed to the LOAD_LIBRARY stage assuming a single stage library loading: host sends LOAD_LIBRARY_PREPARE with the dma_id DSP replies that the message type is not supported/handled Host acknowledges the return code and sets the RUN bit Host sends LOAD_LIBRARY with dma_id and lib_id DSP receives the library data. Signed-off-by:
-
Peter Ujfalusi authored
The FIFOS (FIFO Size) field is in bit 0-15 of the register. Use the defined mask instead of a magic number for the FIFOS value masking in hda_dsp_stream_hw_params(). Signed-off-by:
-
Peter Ujfalusi authored
The status code 2 and 15 can be translated to -EOPNOTSUPP, so convert them to a meaningful error number. Signed-off-by:
-
Bard Liao authored
When a copier exposes a single format, we can fixup the BE dailink with that format. This is helpful when some codec have format restrictions and e.g. don't support a 32-bit format. In that case, the copier output formats mirror that restriction in the topology file. An alternate solution was suggested earlier using a dedicated topology token. When specified, the token would be used to fix-up the dailink. The main reason why this solution was chosen is that there is a risk of a disconnect between token definition and copier format. With a single piece of information as suggested in this patch, there are fewer risks of a bad configuration. Signed-off-by:
-
Bard Liao authored
We will use the sof_ipc4_copier_is_single_format() function to check if a ipc4 copier has single format available in ipc4-pcm.c in the next patch. Signed-off-by:
-
- 14 Sep, 2023 2 commits
-
-
Richard Fitzgerald authored
The cs35l56_pm_ops_i2c_spi struct is only needed if either the I2C or SPI modules are selected for building. Otherwise it would be unused bytes, so in that case omit it. Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230914150918.14505-4-rf@opensource.cirrus.comSigned-off-by:
-
Richard Fitzgerald authored
pm.h now has macros to create and export the dev_pm_ops struct only if CONFIG_PM is enabled. Signed-off-by:
-
