- 07 Mar, 2018 10 commits
-
-
Michal Kalderon authored
Rdma requires ILT Memory to be allocated for it's QPs. Each ILT entry points to a page used by several Rdma QPs. To avoid allocating all the memory in advance, the rdma implementation dynamically allocates memory as more QPs are added, however it does not dynamically free the memory. The memory should have been freed on rmmod qedr, but isn't. This patch adds the memory freeing on rmmod qedr (currently it will be freed with qed is removed). An outcome of this bug, is that if qedr is unloaded and loaded without unloaded qed, there will be no more RoCE traffic. The reason these are related, is that the logic of detecting the first QP ever opened is by asking whether ILT memory for RoCE has been allocated. In addition, this patch modifies freeing of the Task context to always use the PROTOCOLID_ROCE and not the protocol passed, this is because task context for iWARP and ROCE both use the ROCE protocol id, as opposed to the connection context. Fixes: dbb799c3 ("qed: Initialize hardware for new protocols") Signed-off-by:
Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by:
Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2018-03-05 This series contains fixes to e1000e only. Benjamin Poirier provides all but one fix in this series, starting with workaround for a VMWare e1000e emulation issue where ICR reads 0x0 on the emulated device. Partially reverted a previous commit dealing with the "Other" interrupt throttling to avoid unforeseen fallout from these changes that are not strictly necessary. Restored the ICS write for receive and transmit queue interrupts in the case that txq or rxq bits were set in ICR and the Other interrupt handler read and cleared ICR before the queue interrupt was raised. Fixed an bug where interrupts may be missed if ICR is read while INT_ASSERTED is not set, so avoid the problem by setting all bits related to events that can trigger the Other interrupt in IMS. Fixed the return value for check_for_link() when auto-negotiation is off. Pierre-Yves Kerbrat fixes e1000e to use dma_zalloc_coherent() to make sure the ring is memset to 0 to prevent the area from containing garbage. v2: added an additional e1000e fix to the series ==================== Signed-off-by: -
Eric Dumazet authored
Marek reported a LOCKDEP issue occurring on 32bit host, that we tracked down to the fact that usbnet could either run from soft or hard irqs. This patch adds u64_stats_update_begin_irqsave() and u64_stats_update_end_irqrestore() helpers to solve this case. [ 17.768040] ================================ [ 17.772239] WARNING: inconsistent lock state [ 17.776511] 4.16.0-rc3-next-20180227-00007-g876c53a7493c #453 Not tainted [ 17.783329] -------------------------------- [ 17.787580] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [ 17.793607] swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 17.798751] (&syncp->seq#5){?.-.}, at: [<9b22e5f0>] asix_rx_fixup_internal+0x188/0x288 [ 17.806790] {IN-HARDIRQ-W} state was registered at: [ 17.811677] tx_complete+0x100/0x208 [ 17.815319] __usb_hcd_giveback_urb+0x60/0xf0 [ 17.819770] xhci_giveback_urb_in_irq+0xa8/0x240 [ 17.824469] xhci_td_cleanup+0xf4/0x16c [ 17.828367] xhci_irq+0xe74/0x2240 [ 17.831827] usb_hcd_irq+0x24/0x38 [ 17.835343] __handle_irq_event_percpu+0x98/0x510 [ 17.840111] handle_irq_event_percpu+0x1c/0x58 [ 17.844623] handle_irq_event+0x38/0x5c [ 17.848519] handle_fasteoi_irq+0xa4/0x138 [ 17.852681] generic_handle_irq+0x18/0x28 [ 17.856760] __handle_domain_irq+0x6c/0xe4 [ 17.860941] gic_handle_irq+0x54/0xa0 [ 17.864666] __irq_svc+0x70/0xb0 [ 17.867964] arch_cpu_idle+0x20/0x3c [ 17.871578] arch_cpu_idle+0x20/0x3c [ 17.875190] do_idle+0x144/0x218 [ 17.878468] cpu_startup_entry+0x18/0x1c [ 17.882454] start_kernel+0x394/0x400 [ 17.886177] irq event stamp: 161912 [ 17.889616] hardirqs last enabled at (161912): [<7bedfacf>] __netdev_alloc_skb+0xcc/0x140 [ 17.897893] hardirqs last disabled at (161911): [<d58261d0>] __netdev_alloc_skb+0x94/0x140 [ 17.904903] exynos5-hsi2c 12ca0000.i2c: tx timeout [ 17.906116] softirqs last enabled at (161904): [<387102ff>] irq_enter+0x78/0x80 [ 17.906123] softirqs last disabled at (161905): [<cf4c628e>] irq_exit+0x134/0x158 [ 17.925722]. [ 17.925722] other info that might help us debug this: [ 17.933435] Possible unsafe locking scenario: [ 17.933435]. [ 17.940331] CPU0 [ 17.942488] ---- [ 17.944894] lock(&syncp->seq#5); [ 17.948274] <Interrupt> [ 17.950847] lock(&syncp->seq#5); [ 17.954386]. [ 17.954386] *** DEADLOCK *** [ 17.954386]. [ 17.962422] no locks held by swapper/0/0. Fixes: c8b5d129 ("net: usbnet: support 64bit stats") Signed-off-by:Eric Dumazet <edumazet@google.com> Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by:
-
Alexey Kodanev authored
When we exceed current packets limit and we have more than one segment in the list returned by skb_gso_segment(), netem drops only the first one, skipping the rest, hence kmemleak reports: unreferenced object 0xffff880b5d23b600 (size 1024): comm "softirq", pid 0, jiffies 4384527763 (age 2770.629s) hex dump (first 32 bytes): 00 80 23 5d 0b 88 ff ff 00 00 00 00 00 00 00 00 ..#]............ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d8a19b9d>] __alloc_skb+0xc9/0x520 [<000000001709b32f>] skb_segment+0x8c8/0x3710 [<00000000c7b9bb88>] tcp_gso_segment+0x331/0x1830 [<00000000c921cba1>] inet_gso_segment+0x476/0x1370 [<000000008b762dd4>] skb_mac_gso_segment+0x1f9/0x510 [<000000002182660a>] __skb_gso_segment+0x1dd/0x620 [<00000000412651b9>] netem_enqueue+0x1536/0x2590 [sch_netem] [<0000000005d3b2a9>] __dev_queue_xmit+0x1167/0x2120 [<00000000fc5f7327>] ip_finish_output2+0x998/0xf00 [<00000000d309e9d3>] ip_output+0x1aa/0x2c0 [<000000007ecbd3a4>] tcp_transmit_skb+0x18db/0x3670 [<0000000042d2a45f>] tcp_write_xmit+0x4d4/0x58c0 [<0000000056a44199>] tcp_tasklet_func+0x3d9/0x540 [<0000000013d06d02>] tasklet_action+0x1ca/0x250 [<00000000fcde0b8b>] __do_softirq+0x1b4/0x5a3 [<00000000e7ed027c>] irq_exit+0x1e2/0x210 Fix it by adding the rest of the segments, if any, to skb 'to_free' list. Add new __qdisc_drop_all() and qdisc_drop_all() functions because they can be useful in the future if we need to drop segmented GSO packets in other places. Fixes: 6071bd1a ("netem: Segment GSO packets on enqueue") Signed-off-by:Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothDavid S. Miller authored
Johan Hedberg says: ==================== pull request: bluetooth 2018-03-05 Here are a few more Bluetooth fixes for the 4.16 kernel: - btusb: reset/resume fixes for Yoga 920 and Dell OptiPlex 3060 - Fix for missing encryption refresh with the Security Manager protocol ==================== Signed-off-by: -
Denis Kirjanov authored
__dev_mc_add grabs an adress spinlock so use atomic context in kmalloc. / # ifconfig eth0 inet 192.168.0.111 [ 89.331622] BUG: sleeping function called from invalid context at mm/slab.h:420 [ 89.339002] in_atomic(): 1, irqs_disabled(): 0, pid: 1035, name: ifconfig [ 89.345799] 2 locks held by ifconfig/1035: [ 89.349908] #0: (rtnl_mutex){+.+.}, at: [<(ptrval)>] devinet_ioctl+0xc0/0x8a0 [ 89.357258] #1: (_xmit_ETHER){+...}, at: [<(ptrval)>] __dev_mc_add+0x28/0x80 [ 89.364520] CPU: 1 PID: 1035 Comm: ifconfig Not tainted 4.16.0-rc3-dirty #8 [ 89.371464] Call Trace: [ 89.373908] [e959db60] [c066f948] dump_stack+0xa4/0xfc (unreliable) [ 89.380177] [e959db80] [c00671d8] ___might_sleep+0x248/0x280 [ 89.385833] [e959dba0] [c01aec34] kmem_cache_alloc_trace+0x174/0x320 [ 89.392179] [e959dbd0] [c04ab920] dtsec_add_hash_mac_address+0x130/0x240 [ 89.398874] [e959dc00] [c04a9d74] set_multi+0x174/0x1b0 [ 89.404093] [e959dc30] [c04afb68] dpaa_set_rx_mode+0x68/0xe0 [ 89.409745] [e959dc40] [c057baf8] __dev_mc_add+0x58/0x80 [ 89.415052] [e959dc60] [c060fd64] igmp_group_added+0x164/0x190 [ 89.420878] [e959dca0] [c060ffa8] ip_mc_inc_group+0x218/0x460 [ 89.426617] [e959dce0] [c06120fc] ip_mc_up+0x3c/0x190 [ 89.431662] [e959dd10] [c0607270] inetdev_event+0x250/0x620 [ 89.437227] [e959dd50] [c005f190] notifier_call_chain+0x80/0xf0 [ 89.443138] [e959dd80] [c0573a74] __dev_notify_flags+0x54/0xf0 [ 89.448964] [e959dda0] [c05743f8] dev_change_flags+0x48/0x60 [ 89.454615] [e959ddc0] [c0606744] devinet_ioctl+0x544/0x8a0 [ 89.460180] [e959de10] [c060987c] inet_ioctl+0x9c/0x1f0 [ 89.465400] [e959de80] [c05479a8] sock_ioctl+0x168/0x460 [ 89.470708] [e959ded0] [c01cf3ec] do_vfs_ioctl+0xac/0x8c0 [ 89.476099] [e959df20] [c01cfc40] SyS_ioctl+0x40/0xc0 [ 89.481147] [e959df40] [c0011318] ret_from_syscall+0x0/0x3c [ 89.486715] --- interrupt: c01 at 0x1006943c [ 89.486715] LR = 0x100c45ec Signed-off-by:Denis Kirjanov <kda@linux-powerpc.org> Acked-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
-
David S. Miller authored
Paul Blakey says: ==================== rhashtable: Fix rhltable duplicates insertion On our mlx5 driver fs_core.c, we use the rhltable interface to store flow groups. We noticed that sometimes we get a warning that flow group isn't found at removal. This rare case was caused when a specific scenario happened, insertion of a flow group with a similar match criteria (a duplicate), but only where the flow group rhash_head was second (or not first) on the relevant rhashtable bucket list. The first patch fixes it, and the second one adds a test that show it is now working. Paul. v3 --> v2 changes: * added missing fix in rhashtable_lookup_one code path as well. v1 --> v2 changes: * Changed commit messages to better reflect the change ==================== Signed-off-by: -
Paul Blakey authored
Tries to insert duplicates in the middle of bucket's chain: bucket 1: [[val 21 (tid=1)]] -> [[ val 1 (tid=2), val 1 (tid=0) ]] Reuses tid to distinguish the elements insertion order. Signed-off-by:
Paul Blakey <paulb@mellanox.com> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Paul Blakey authored
When inserting duplicate objects (those with the same key), current rhlist implementation messes up the chain pointers by updating the bucket pointer instead of prev next pointer to the newly inserted node. This causes missing elements on removal and travesal. Fix that by properly updating pprev pointer to point to the correct rhash_head next pointer. Issue: 1241076 Change-Id: I86b2c140bcb4aeb10b70a72a267ff590bb2b17e7 Fixes: ca26893f ('rhashtable: Add rhlist interface') Signed-off-by:
-
Geert Uytterhoeven authored
The Stream Buffer for EtherAVB-IF (STBE) is an optional component, and is not present on all SoCs. Document this in the DT bindings, including a list of SoCs that do have it. Fixes: 785ec874 ("ravb: document R8A77970 bindings") Fixes: f231c417 ("dt-bindings: net: renesas-ravb: Add support for R8A77995 RAVB") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Acked-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 06 Mar, 2018 8 commits
-
-
David Ahern authored
Only allow ifindex from IP_PKTINFO to override SO_BINDTODEVICE settings if the index is actually set in the message. Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Randy Dunlap authored
Correct spelling of National Semi-conductor (no hyphen) in drivers/net/ethernet/. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: Use strlcpy() for ethtool::get_strings After turning on KASAN on one of my systems, I started getting lots of out of bounds errors while fetching a given port's statistics, and indeed using memcpy() is unsafe for copying strings which have not been declared as an array of ETH_GSTRING_LEN bytes, so let's use strlcpy() instead. This allows the best of both worlds: we still keep the efficient memory usage of variably sized strings, but we don't copy more than we need to. Changes in v2: - dropped the 3 other patches that were not necessary - use strlcpy() instead of strncpy() ==================== Signed-off-by: -
Florian Fainelli authored
Our statistics strings are allocated at initialization without being bound to a specific size, yet, we would copy ETH_GSTRING_LEN bytes using memcpy() which would create out of bounds accesses, this was flagged by KASAN. Replace this with strlcpy() to make sure we are bound the source buffer size and we also always NUL-terminate strings. Fixes: 820ee17b ("net: phy: broadcom: Add support code for reading PHY counters") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
Our statistics strings are allocated at initialization without being bound to a specific size, yet, we would copy ETH_GSTRING_LEN bytes using memcpy() which would create out of bounds accesses, this was flagged by KASAN. Replace this with strlcpy() to make sure we are bound the source buffer size and we also always NUL-terminate strings. Fixes: 2b2427d0 ("phy: micrel: Add ethtool statistics counters") Signed-off-by:
-
Florian Fainelli authored
Our statistics strings are allocated at initialization without being bound to a specific size, yet, we would copy ETH_GSTRING_LEN bytes using memcpy() which would create out of bounds accesses, this was flagged by KASAN. Replace this with strlcpy() to make sure we are bound the source buffer size and we also always NUL-terminate strings. Fixes: d2fa47d9 ("phy: marvell: Add ethtool statistics counters") Signed-off-by:
-
Florian Fainelli authored
Our statistics strings are allocated at initialization without being bound to a specific size, yet, we would copy ETH_GSTRING_LEN bytes using memcpy() which would create out of bounds accesses, this was flagged by KASAN. Replace this with strlcpy() to make sure we are bound the source buffer size and we also always NUL-terminate strings. Fixes: 967dd82f ("net: dsa: b53: Add support for Broadcom RoboSwitch") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linuxLinus Torvalds authored
Pull ia64 cleanups from Tony Luck: - More atomic cleanup from willy - Fix a python script to work with version 3 - Some other small cleanups * tag 'please-pull-ia64_misc' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: ia64/err-inject: fix spelling mistake: "capapbilities" -> "capabilities" ia64/err-inject: Use get_user_pages_fast() ia64: doc: tweak whitespace for 'console=' parameter ia64: Convert remaining atomic operations ia64: convert unwcheck.py to python3
-
- 05 Mar, 2018 22 commits
-
-
Colin Ian King authored
Trivial fix to spelling mistake in debug message text. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Tony Luck <tony.luck@intel.com>
-
Davidlohr Bueso authored
At the point of sysfs callback, the call to gup is done without mmap_sem (or any lock for that matter). This is racy. As such, use the get_user_pages_fast() alternative and safely avoid taking the lock, if possible. Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Signed-off-by:
-
Sergei Trofimovich authored
CC: Tony Luck <tony.luck@intel.com> CC: Fenghua Yu <fenghua.yu@intel.com> CC: linux-ia64@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by:
Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by:
-
Matthew Wilcox authored
While we've only seen inlining problems with atomic_sub_return(), the other atomic operations could have the same problem. Convert all remaining operations to use the same solution as atomic_sub_return(). Signed-off-by:
Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by:
-
Corentin Labbe authored
Since my system use python3 as default, arch/ia64/scripts/unwcheck.py no longer run. This patch convert it to the python3 syntax. I have ran it with python2/python3 while printing values of start/end/rlen_sum which could be impacted by this change and I see no difference. Fixes: 94a47083 ("scripts: change scripts to use system python instead of env") Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
-
Pierre-Yves Kerbrat authored
Descriptor rings were not initialized at zero when allocated When area contained garbage data, it caused skb_over_panic in e1000_clean_rx_irq (if data had E1000_RXD_STAT_DD bit set) This patch makes use of dma_zalloc_coherent to make sure the ring is memset at 0 to prevent the area from containing garbage. Following is the signature of the panic: IODDR0@0.0: skbuff: skb_over_panic: text:80407b20 len:64010 put:64010 head:ab46d800 data:ab46d842 tail:0xab47d24c end:0xab46df40 dev:eth0 IODDR0@0.0: BUG: failure at net/core/skbuff.c:105/skb_panic()! IODDR0@0.0: Kernel panic - not syncing: BUG! IODDR0@0.0: IODDR0@0.0: Process swapper/0 (pid: 0, threadinfo=81728000, task=8173cc00 ,cpu: 0) IODDR0@0.0: SP = <815a1c0c> IODDR0@0.0: Stack: 00000001 IODDR0@0.0: b2d89800 815e33ac IODDR0@0.0: ea73c040 00000001 IODDR0@0.0: 60040003 0000fa0a IODDR0@0.0: 00000002 IODDR0@0.0: IODDR0@0.0: 804540c0 815a1c70 IODDR0@0.0: b2744000 602ac070 IODDR0@0.0: 815a1c44 b2d89800 IODDR0@0.0: 8173cc00 815a1c08 IODDR0@0.0: IODDR0@0.0: 00000006 IODDR0@0.0: 815a1b50 00000000 IODDR0@0.0: 80079434 00000001 IODDR0@0.0: ab46df40 b2744000 IODDR0@0.0: b2d89800 IODDR0@0.0: IODDR0@0.0: 0000fa0a 8045745c IODDR0@0.0: 815a1c88 0000fa0a IODDR0@0.0: 80407b20 b2789f80 IODDR0@0.0: 00000005 80407b20 IODDR0@0.0: IODDR0@0.0: IODDR0@0.0: Call Trace: IODDR0@0.0: [<804540bc>] skb_panic+0xa4/0xa8 IODDR0@0.0: [<80079430>] console_unlock+0x2f8/0x6d0 IODDR0@0.0: [<80457458>] skb_put+0xa0/0xc0 IODDR0@0.0: [<80407b1c>] e1000_clean_rx_irq+0x2dc/0x3e8 IODDR0@0.0: [<80407b1c>] e1000_clean_rx_irq+0x2dc/0x3e8 IODDR0@0.0: [<804079c8>] e1000_clean_rx_irq+0x188/0x3e8 IODDR0@0.0: [<80407b1c>] e1000_clean_rx_irq+0x2dc/0x3e8 IODDR0@0.0: [<80468b48>] __dev_kfree_skb_any+0x88/0xa8 IODDR0@0.0: [<804101ac>] e1000e_poll+0x94/0x288 IODDR0@0.0: [<8046e9d4>] net_rx_action+0x19c/0x4e8 IODDR0@0.0: ... IODDR0@0.0: Maximum depth to print reached. Use kstack=<maximum_depth_to_print> To specify a custom value (where 0 means to display the full backtrace) IODDR0@0.0: ---[ end Kernel panic - not syncing: BUG! Signed-off-by:
Pierre-Yves Kerbrat <pkerbrat@kalray.eu> Signed-off-by:
Marius Gligor <mgligor@kalray.eu> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Reviewed-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Linus Torvalds authored
Merge tag 'linux-kselftest-4.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "A fix for regression in memory-hotplug install script that prevents the test from running on the target" * tag 'linux-kselftest-4.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: memory-hotplug: fix emit_tests regression
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Use an appropriate TSQ pacing shift in mac80211, from Toke Høiland-Jørgensen. 2) Just like ipv4's ip_route_me_harder(), we have to use skb_to_full_sk in ip6_route_me_harder, from Eric Dumazet. 3) Fix several shutdown races and similar other problems in l2tp, from James Chapman. 4) Handle missing XDP flush properly in tuntap, for real this time. From Jason Wang. 5) Out-of-bounds access in powerpc ebpf tailcalls, from Daniel Borkmann. 6) Fix phy_resume() locking, from Andrew Lunn. 7) IFLA_MTU values are ignored on newlink for some tunnel types, fix from Xin Long. 8) Revert F-RTO middle box workarounds, they only handle one dimension of the problem. From Yuchung Cheng. 9) Fix socket refcounting in RDS, from Ka-Cheong Poon. 10) Don't allow ppp unit registration to an unregistered channel, from Guillaume Nault. 11) Various hv_netvsc fixes from Stephen Hemminger. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (98 commits) hv_netvsc: propagate rx filters to VF hv_netvsc: filter multicast/broadcast hv_netvsc: defer queue selection to VF hv_netvsc: use napi_schedule_irqoff hv_netvsc: fix race in napi poll when rescheduling hv_netvsc: cancel subchannel setup before halting device hv_netvsc: fix error unwind handling if vmbus_open fails hv_netvsc: only wake transmit queue if link is up hv_netvsc: avoid retry on send during shutdown virtio-net: re enable XDP_REDIRECT for mergeable buffer ppp: prevent unregistered channels from connecting to PPP units tc-testing: skbmod: fix match value of ethertype mlxsw: spectrum_switchdev: Check success of FDB add operation net: make skb_gso_*_seglen functions private net: xfrm: use skb_gso_validate_network_len() to check gso sizes net: sched: tbf: handle GSO_BY_FRAGS case in enqueue net: rename skb_gso_validate_mtu -> skb_gso_validate_network_len rds: Incorrect reference counting in TCP socket creation net: ethtool: don't ignore return from driver get_fecparam method vrf: check forwarding on the original netdevice when generating ICMP dest unreachable ... -
Benjamin Poirier authored
When autoneg is off, the .check_for_link callback functions clear the get_link_status flag and systematically return a "pseudo-error". This means that the link is not detected as up until the next execution of the e1000_watchdog_task() 2 seconds later. Fixes: 19110cfb ("e1000e: Separate signaling for link check/link up") Signed-off-by:
Benjamin Poirier <bpoirier@suse.com> Acked-by:
Sasha Neftin <sasha.neftin@intel.com> Tested-by:
-
Benjamin Poirier authored
The 82574 specification update errata 12 states that interrupts may be missed if ICR is read while INT_ASSERTED is not set. Avoid that problem by setting all bits related to events that can trigger the Other interrupt in IMS. The Other interrupt is raised for such events regardless of whether or not they are set in IMS. However, only when they are set is the INT_ASSERTED bit also set in ICR. By doing this, we ensure that INT_ASSERTED is always set when we read ICR in e1000_msix_other() and steer clear of the errata. This also ensures that ICR will automatically be cleared on read, therefore we no longer need to clear bits explicitly. Signed-off-by:
-
Benjamin Poirier authored
Restores the ICS write for Rx/Tx queue interrupts which was present before commit 16ecba59 ("e1000e: Do not read ICR in Other interrupt", v4.5-rc1) but was not restored in commit 4aea7a5c ("e1000e: Avoid receiver overrun interrupt bursts", v4.15-rc1). This re-raises the queue interrupts in case the txq or rxq bits were set in ICR and the Other interrupt handler read and cleared ICR before the queue interrupt was raised. Fixes: 4aea7a5c ("e1000e: Avoid receiver overrun interrupt bursts") Signed-off-by:
-
Benjamin Poirier authored
This partially reverts commit 4aea7a5c. We keep the fix for the first part of the problem (1) described in the log of that commit, that is to read ICR in the other interrupt handler. We remove the fix for the second part of the problem (2), Other interrupt throttling. Bursts of "Other" interrupts may once again occur during rxo (receive overflow) traffic conditions. This is deemed acceptable in the interest of avoiding unforeseen fallout from changes that are not strictly necessary. As discussed, the e1000e driver should be in "maintenance mode". Link: https://www.spinics.net/lists/netdev/msg480675.htmlSigned-off-by:
-
Benjamin Poirier authored
It was reported that emulated e1000e devices in vmware esxi 6.5 Build 7526125 do not link up after commit 4aea7a5c ("e1000e: Avoid receiver overrun interrupt bursts", v4.15-rc1). Some tracing shows that after e1000e_trigger_lsc() is called, ICR reads out as 0x0 in e1000_msix_other() on emulated e1000e devices. In comparison, on real e1000e 82574 hardware, icr=0x80000004 (_INT_ASSERTED | _LSC) in the same situation. Some experimentation showed that this flaw in vmware e1000e emulation can be worked around by not setting Other in EIAC. This is how it was before 16ecba59 ("e1000e: Do not read ICR in Other interrupt", v4.5-rc1). Fixes: 4aea7a5c ("e1000e: Avoid receiver overrun interrupt bursts") Signed-off-by:
-
David S. Miller authored
Stephen Hemminger says: ==================== hv_netvsc: minor fixes These are improvements to netvsc driver. They aren't functionality changes so not targeting net-next; and they are not show stopper bugs that need to go to stable either. v2 - drop the irq flags patch, defer it to net-next - split the multicast filter flag patch out - change propogate rx mode patch to handle startup of vf ==================== Signed-off-by: -
Stephen Hemminger authored
The netvsc device should propagate filters to the SR-IOV VF device (if present). The flags also need to be propagated to the VF device as well. This only really matters on local Hyper-V since Azure does not support multiple addresses. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
Stephen Hemminger authored
The netvsc driver was always enabling all multicast and broadcast even if netdevice flag had not enabled it. Signed-off-by:
-
Stephen Hemminger authored
When VF is used for accelerated networking it will likely have more queues (and different policy) than the synthetic NIC. This patch defers the queue policy to the VF so that all the queues can be used. This impacts workloads like local generate UDP. Signed-off-by:
-
Stephen Hemminger authored
Since the netvsc_channel_cb is already called in interrupt context from vmbus, there is no need to do irqsave/restore. Signed-off-by:
-
Stephen Hemminger authored
There is a race between napi_reschedule and re-enabling interrupts which could lead to missed host interrrupts. This occurs when interrupts are re-enabled (hv_end_read) and vmbus irq callback (netvsc_channel_cb) has already scheduled NAPI. Signed-off-by:
-
Stephen Hemminger authored
Block setup of multiple channels earlier in the teardown process. This avoids possible races between halt and subchannel initialization. Suggested-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Stephen Hemminger authored
Need to delete NAPI association if vmbus_open fails. Signed-off-by:
-
Stephen Hemminger authored
Don't wake transmit queues if link is not up yet. Signed-off-by:
-
