- 19 Jan, 2016 30 commits
-
-
Michael S. Tsirkin authored
commit d5424838 upstream. commit 5d9a07b0 ("vhost: relax used address alignment") fixed the alignment for the used virtual address, but not for the physical address used for logging. That's a mistake: alignment should clearly be the same for virtual and physical addresses, Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
David Henningsson authored
commit 02f6ff90 upstream. On the internal mic of the Packard Bell DOTS, one channel has an inverted signal. Add a quirk to fix this up. BugLink: https://bugs.launchpad.net/bugs/1523232Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Ludovic Desroches authored
commit 15a03850 upstream. Fix typo in a macro which was not used until now. It explains why there is no error at compilation time. Signed-off-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Fixes: e1f7c9ee "dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver" Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Marcin Wojtas authored
commit b5015854 upstream. In hitherto code in case of RX buffer allocation error during refill, original buffer is pushed to the network stack, but the amount of available buffer pointers in BM pool is decreased. This commit fixes the situation by moving refill call before skb_put(), and returning original buffer pointer to the pool in case of an error. Signed-off-by:
Marcin Wojtas <mw@semihalf.com> Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Marcin Wojtas authored
commit 4229d502 upstream. Each allocated buffer, whose pointer is put into BM pool is DMA-mapped. Hence it should be properly unmapped after usage or when removing buffers from pool. This commit fixes DMA handling on RX path by adding dma_unmap_single() in mvpp2_rx() and in mvpp2_bufs_free(). The latter function's argument number had to be increased for this purpose. Signed-off-by:
-
Marcin Wojtas authored
commit e864b4c7 upstream. The Tx descriptor release code currently calls dma_unmap_single() and dev_kfree_skb_any() if the descriptor is associated with a non-NULL skb. This condition is true only for the last fragment of the packet. Since every descriptor's buffer is DMA-mapped it has to be properly unmapped. Signed-off-by:
-
Takashi Iwai authored
commit a74a8216 upstream. rme96 driver needs to reset DAC depending on the sample rate, and this results in resetting to the max volume suddenly. It's because of the missing call of snd_rme96_apply_dac_volume(). However, calling this function right after the DAC reset still may not work, and we need some delay before this call. Since the DAC reset and the procedure after that are performed in the spinlock, we delay the DAC volume restore at the end after the spinlock. Reported-and-tested-by:
Sylvain LABOISNE <maeda1@free.fr> Signed-off-by:
-
Chunfeng Yun authored
commit 096b110a upstream. if a full speed hub connects to a high speed hub which supports MTT, the MTT field of its slot context will be set to 1 when xHCI driver setups an xHCI virtual device in xhci_setup_addressable_virt_dev(); once usb core fetch its hub descriptor, and need to update the xHC's internal data structures for the device, the HUB field of its slot context will be set to 1 too, meanwhile MTT is also set before, this will cause configure endpoint command fail, so in the case, we should clear MTT to 0 for full speed hub according to section 6.2.2 Signed-off-by:
Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Peter Zijlstra authored
commit 642c2d67 upstream. Dmitry reported a fairly silly recursive lock deadlock for PERF_EVENT_IOC_PERIOD, fix this by explicitly doing the inactive part of __perf_event_period() instead of calling that function. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Potapenko <glider@google.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: c7999c6f ("perf: Fix PERF_EVENT_IOC_PERIOD migration race") Link: http://lkml.kernel.org/r/20151130115615.GJ17308@twins.programming.kicks-ass.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Will Deacon authored
commit 40ee068e upstream. Under some unusual context-switching patterns, it is possible to end up with multiple threads from the same mm running concurrently with different ASIDs: 1. CPU x schedules task t with mm p containing ASID a and generation g This task doesn't block and the CPU doesn't context switch. So: * per_cpu(active_asid, x) = {g,a} * p->context.id = {g,a} 2. Some other CPU generates an ASID rollover. The global generation is now (g + 1). CPU x is still running t, with no context switch and so per_cpu(reserved_asid, x) = {g,a} 3. CPU y schedules task t', which shares mm p with t. The generation mismatches, so we take the slowpath and hit the reserved ASID from CPU x. p is then updated so that p->context.id = {g + 1,a} 4. CPU y schedules some other task u, which has an mm != p. 5. Some other CPU generates *another* CPU rollover. The global generation is now (g + 2). CPU x is still running t, with no context switch and so per_cpu(reserved_asid, x) = {g,a}. 6. CPU y once again schedules task t', but now *fails* to hit the reserved ASID from CPU x because of the generation mismatch. This results in a new ASID being allocated, despite the fact that t is still running on CPU x with the same mm. Consequently, TLBIs (e.g. as a result of CoW) will not be synchronised between the two threads. This patch fixes the problem by updating all of the matching reserved ASIDs when we hit on the slowpath (i.e. in step 3 above). This keeps the reserved ASIDs in-sync with the mm and avoids the problem. Reported-by:
Tony Thompson <anthony.thompson@arm.com> Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Mike Snitzer authored
commit 30ce6e1c upstream. The block allocated at the start of btree_split_sibling() is never released if later insert_at() fails. Fix this by releasing the previously allocated bufio block using unlock_block(). Reported-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Ross Lagerwall authored
commit 3de88d62 upstream. When a CPU is offlined, there may be unprocessed events on a port for that CPU. If the port is subsequently reused on a different CPU, it could be in an unexpected state with the link bit set, resulting in interrupts being missed. Fix this by consuming any unprocessed events for a particular CPU when that CPU dies. Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Ben Hutchings authored
commit 5377adb0 upstream. usb_parse_ss_endpoint_companion() now decodes the burst multiplier correctly in order to check that it's <= 3, but still uses the wrong expression if warning that it's > 3. Fixes: ff30cbc8 ("usb: Use the USB_SS_MULT() macro to get the ...") Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Alexey Khoroshilov authored
commit f9fa1887 upstream. qset_fill_page_list() do not check for dma mapping errors. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Hans Yang authored
commit 464ad8c4 upstream. When a USB 3.0 mass storage device is disconnected in transporting state, storage device driver may handle it as a transport error and reset the device by invoking usb_reset_and_verify_device() and following could happen: in usb_reset_and_verify_device(): udev->bos = NULL; For U1/U2 enabled devices, driver will disable LPM, and in some conditions: from usb_unlocked_disable_lpm() --> usb_disable_lpm() --> usb_enable_lpm() udev->bos->ss_cap->bU1devExitLat; And it causes 'NULL pointer' and 'kernel panic': [ 157.976257] Unable to handle kernel NULL pointer dereference at virtual address 00000010 ... [ 158.026400] PC is at usb_enable_link_state+0x34/0x2e0 [ 158.031442] LR is at usb_enable_lpm+0x98/0xac ... [ 158.137368] [<ffffffc0006a1cac>] usb_enable_link_state+0x34/0x2e0 [ 158.143451] [<ffffffc0006a1fec>] usb_enable_lpm+0x94/0xac [ 158.148840] [<ffffffc0006a20e8>] usb_disable_lpm+0xa8/0xb4 ... [ 158.214954] Kernel panic - not syncing: Fatal exception This commit moves 'udev->bos = NULL' behind usb_unlocked_disable_lpm() to prevent from NULL pointer access. Issue can be reproduced by following setup: 1) A SS pen drive behind a SS hub connected to the host. 2) Transporting data between the pen drive and the host. 3) Abruptly disconnect hub and pen drive from host. 4) With a chance it crashes. Signed-off-by:
Hans Yang <hansy@nvidia.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Guillaume Delbergue authored
commit d5d4fdd8 upstream. This patch is specifically for PCI support on the Versatile PB board using a DT. Currently, the dynamic IRQ mapping is broken when using DTs. For example, on QEMU, the SCSI driver is unable to request the IRQ. To fix this issue, this patch replaces the current dynamic mechanism with a static value as is done in the non-DT case. Signed-off-by:
Guillaume Delbergue <guillaume.delbergue@greensocs.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Al Viro authored
commit 9225c0b7 upstream. missing get_user() Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Dmitry Katsubo authored
commit 9fa62b1a upstream. The patch extends the family of SATA-to-USB JMicron adapters that need FUA to be disabled and applies the same policy for uas driver. See details in http://unix.stackexchange.com/questions/237204/Signed-off-by:
Dmitry Katsubo <dmitry.katsubo@gmail.com> Tested-by:
-
Mikulas Patocka authored
commit d98f1cd0 upstream. When I connect an Intel SSD to SATA SIL controller (PCI ID 1095:3114), any TRIM command results in I/O errors being reported in the log. There is other similar error reported with TRIM and the SIL controller: https://bugs.centos.org/view.php?id=5880 Apparently the controller doesn't support TRIM commands. This patch disables TRIM support on the SATA SIL controller. ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata7.00: BMDMA2 stat 0x50001 ata7.00: failed command: DATA SET MANAGEMENT ata7.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 0 dma 512 out res 51/04:01:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) ata7.00: status: { DRDY ERR } ata7.00: error: { ABRT } ata7.00: device reported invalid CHS sector 0 sd 8:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 8:0:0:0: [sdb] tag#0 Sense Key : Illegal Request [current] [descriptor] sd 8:0:0:0: [sdb] tag#0 Add. Sense: Unaligned write command sd 8:0:0:0: [sdb] tag#0 CDB: Write same(16) 93 08 00 00 00 00 00 21 95 88 00 20 00 00 00 00 blk_update_request: I/O error, dev sdb, sector 2200968 Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Xiangliang Yu authored
commit 023113d2 upstream. Current code doesn't update port value of Port Multiplier(PM) when sending FIS of softreset to device, command will fail if FBS is enabled. There are two ways to fix the issue: the first is to disable FBS before sending softreset command to PM device and the second is to update port value of PM when sending command. For the first way, i can't find any related rule in AHCI Spec. The second way can avoid disabling FBS and has better performance. Signed-off-by:
Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by:
-
Hans de Goede authored
commit bba61f50 upstream. According to the datasheets the n factor for dividing the tclk is 2 to the power n on Allwinner SoCs, not 2 to the power n + 1 as it is on other mv64xxx implementations. I've contacted Allwinner about this and they have confirmed that the datasheet is correct. This commit fixes the clk-divider calculations for Allwinner SoCs accordingly. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by:
Olliver Schinagl <oliver@schinagl.nl> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Thomas Hellstrom authored
commit 025af189 upstream. In ttm_write_lock(), the uninterruptible path should call __ttm_write_lock() not __ttm_read_lock(). This fixes a vmwgfx hang on F23 start up. syeh: Extracted this from one of Thomas' internal patches. Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
-
Jan Kara authored
commit bc23f0c8 upstream. Ted and Namjae have reported that truncated pages don't get timely reclaimed after being truncated in data=journal mode. The following test triggers the issue easily: for (i = 0; i < 1000; i++) { pwrite(fd, buf, 1024*1024, 0); fsync(fd); fsync(fd); ftruncate(fd, 0); } The reason is that journal_unmap_buffer() finds that truncated buffers are not journalled (jh->b_transaction == NULL), they are part of checkpoint list of a transaction (jh->b_cp_transaction != NULL) and have been already written out (!buffer_dirty(bh)). We clean such buffers but we leave them in the checkpoint list. Since checkpoint transaction holds a reference to the journal head, these buffers cannot be released until the checkpoint transaction is cleaned up. And at that point we don't call release_buffer_page() anymore so pages detached from mapping are lingering in the system waiting for reclaim to find them and free them. Fix the problem by removing buffers from transaction checkpoint lists when journal_unmap_buffer() finds out they don't have to be there anymore. Reported-and-tested-by:
Namjae Jeon <namjae.jeon@samsung.com> Fixes: de1b7941Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
David Turner authored
commit a4dad1ae upstream. In ext4, the bottom two bits of {a,c,m}time_extra are used to extend the {a,c,m}time fields, deferring the year 2038 problem to the year 2446. When decoding these extended fields, for times whose bottom 32 bits would represent a negative number, sign extension causes the 64-bit extended timestamp to be negative as well, which is not what's intended. This patch corrects that issue, so that the only negative {a,c,m}times are those between 1901 and 1970 (as per 32-bit signed timestamps). Some older kernels might have written pre-1970 dates with 1,1 in the extra bits. This patch treats those incorrectly-encoded dates as pre-1970, instead of post-2311, until kernel 4.20 is released. Hopefully by then e2fsck will have fixed up the bad data. Also add a comment explaining the encoding of ext4's extra {a,c,m}time bits. Signed-off-by:
David Turner <novalis@novalis.org> Signed-off-by:
Mark Harris <mh8928@yahoo.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=23732Signed-off-by:
-
Jonas Jonsson authored
commit a0e80fbd upstream. The flash loader has been seen on a Telit UE910 modem. The flash loader is a bit special, it presents both an ACM and CDC Data interface but only the latter is useful. Unless a magic string is sent to the device it will disappear and the regular modem device appears instead. Signed-off-by:
Jonas Jonsson <jonas@ludd.ltu.se> Tested-by:
Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Jonas Jonsson authored
commit f33a7f72 upstream. Some modems, such as the Telit UE910, are using an Infineon Flash Loader utility. It has two interfaces, 2/2/0 (Abstract Modem) and 10/0/0 (CDC Data). The latter can be used as a serial interface to upgrade the firmware of the modem. However, that isn't possible when the cdc-acm driver takes control of the device. The following is an explanation of the behaviour by Daniele Palmas during discussion on linux-usb. "This is what happens when the device is turned on (without modifying the drivers): [155492.352031] usb 1-3: new high-speed USB device number 27 using ehci-pci [155492.485429] usb 1-3: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 255, changing to 11 [155492.485436] usb 1-3: New USB device found, idVendor=058b, idProduct=0041 [155492.485439] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [155492.485952] cdc_acm 1-3:1.0: ttyACM0: USB ACM device This is the flashing device that is caught by the cdc-acm driver. Once the ttyACM appears, the application starts sending a magic string (simple write on the file descriptor) to keep the device in flashing mode. If this magic string is not properly received in a certain time interval, the modem goes on in normal operative mode: [155493.748094] usb 1-3: USB disconnect, device number 27 [155494.916025] usb 1-3: new high-speed USB device number 28 using ehci-pci [155495.059978] usb 1-3: New USB device found, idVendor=1bc7, idProduct=0021 [155495.059983] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [155495.059986] usb 1-3: Product: 6 CDC-ACM + 1 CDC-ECM [155495.059989] usb 1-3: Manufacturer: Telit [155495.059992] usb 1-3: SerialNumber: 359658044004697 [155495.138958] cdc_acm 1-3:1.0: ttyACM0: USB ACM device [155495.140832] cdc_acm 1-3:1.2: ttyACM1: USB ACM device [155495.142827] cdc_acm 1-3:1.4: ttyACM2: USB ACM device [155495.144462] cdc_acm 1-3:1.6: ttyACM3: USB ACM device [155495.145967] cdc_acm 1-3:1.8: ttyACM4: USB ACM device [155495.147588] cdc_acm 1-3:1.10: ttyACM5: USB ACM device [155495.154322] cdc_ether 1-3:1.12 wwan0: register 'cdc_ether' at usb-0000:00:1a.7-3, Mobile Broadband Network Device, 00:00:11:12:13:14 Using the cdc-acm driver, the string, though being sent in the same way than using the usb-serial-simple driver (I can confirm that the data is passing properly since I used an hw usb sniffer), does not make the device to stay in flashing mode." Signed-off-by:
-
Konstantin Shkolnyy authored
commit 7c90e610 upstream. CP2110 ID (0x10c4, 0xea80) doesn't belong here because it's a HID and completely different from CP210x devices. Signed-off-by:
Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by:
-
Dan Carpenter authored
commit 231bfe53 upstream. WARN_ON() only takes a condition argument. I have changed these to WARN() instead. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Felipe Balbi authored
commit 391e6dcb upstream. pxa27x disconnects pullups on suspend but doesn't notify the gadget driver about it, so gadget driver can't disable the endpoints it was using. This causes problems on resume because gadget core will think endpoints are still enabled and just ignore the following usb_ep_enable(). Fix this problem by calling gadget_driver->disconnect(). Tested-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Roman Gushchin authored
commit 3ca8138f upstream. I got a report about unkillable task eating CPU. Further investigation shows, that the problem is in the fuse_fill_write_pages() function. If iov's first segment has zero length, we get an infinite loop, because we never reach iov_iter_advance() call. Fix this by calling iov_iter_advance() before repeating an attempt to copy data from userspace. A similar problem is described in 124d3b70 ("fix writev regression: pan hanging unkillable and un-straceable"). If zero-length segmend is followed by segment with invalid address, iov_iter_fault_in_readable() checks only first segment (zero-length), iov_iter_copy_from_user_atomic() skips it, fails at second and returns zero -> goto again without skipping zero-length segment. Patch calls iov_iter_advance() before goto again: we'll skip zero-length segment at second iteraction and iov_iter_fault_in_readable() will detect invalid address. Special thanks to Konstantin Khlebnikov, who helped a lot with the commit description. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Maxim Patlasov <mpatlasov@parallels.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Roman Gushchin <klamm@yandex-team.ru> Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Fixes: ea9b9907 ("fuse: implement perform_write") Signed-off-by:
-
- 14 Jan, 2016 1 commit
-
-
Ingo Molnar authored
commit 23a0d4e8 upstream. Tapasweni Pathak reported that we do a kmalloc() in efi_call_phys_prolog() on x86-64 while having interrupts disabled, which is a big no-no, as kmalloc() can sleep. Solve this by removing the irq disabling from the prolog/epilog calls around EFI calls: it's unnecessary, as in this stage we are single threaded in the boot thread, and we don't ever execute this from interrupt contexts. Reported-by:
Tapasweni Pathak <tapaswenipathak@gmail.com> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Cc: Luis Henriques <luis.henriques@canonical.com> Signed-off-by:
-
- 06 Jan, 2016 9 commits
-
-
Kamal Mostafa authored
commit f6ba98c5 upstream. Signed-off-by:
Pavel Machek <pavel@ucw.cz> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Pali Rohar <pali.rohar@gmail.com> Cc: Roberta Dobrescu <roberta.dobrescu@gmail.com> Link: http://lkml.kernel.org/r/1447280736-2161-2-git-send-email-kamal@canonical.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> [ kamal: backport to 3.19-stable: build all tools for this version ] Signed-off-by:
-
Andrew Honig authored
commit 0185604c upstream. Currently if userspace restores the pit counters with a count of 0 on channels 1 or 2 and the guest attempts to read the count on those channels, then KVM will perform a mod of 0 and crash. This will ensure that 0 values are converted to 65536 as per the spec. This is CVE-2015-7513. Signed-off-by:
Andy Honig <ahonig@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
David Howells authored
commit b4a1b4f5 upstream. This fixes CVE-2015-7550. There's a race between keyctl_read() and keyctl_revoke(). If the revoke happens between keyctl_read() checking the validity of a key and the key's semaphore being taken, then the key type read method will see a revoked key. This causes a problem for the user-defined key type because it assumes in its read method that there will always be a payload in a non-revoked key and doesn't check for a NULL pointer. Fix this by making keyctl_read() check the validity of a key after taking semaphore instead of before. I think the bug was introduced with the original keyrings code. This was discovered by a multithreaded test program generated by syzkaller (http://github.com/google/syzkaller). Here's a cleaned up version: #include <sys/types.h> #include <keyutils.h> #include <pthread.h> void *thr0(void *arg) { key_serial_t key = (unsigned long)arg; keyctl_revoke(key); return 0; } void *thr1(void *arg) { key_serial_t key = (unsigned long)arg; char buffer[16]; keyctl_read(key, buffer, 16); return 0; } int main() { key_serial_t key = add_key("user", "%", "foo", 3, KEY_SPEC_USER_KEYRING); pthread_t th[5]; pthread_create(&th[0], 0, thr0, (void *)(unsigned long)key); pthread_create(&th[1], 0, thr1, (void *)(unsigned long)key); pthread_create(&th[2], 0, thr0, (void *)(unsigned long)key); pthread_create(&th[3], 0, thr1, (void *)(unsigned long)key); pthread_join(th[0], 0); pthread_join(th[1], 0); pthread_join(th[2], 0); pthread_join(th[3], 0); return 0; } Build as: cc -o keyctl-race keyctl-race.c -lkeyutils -lpthread Run as: while keyctl-race; do :; done as it may need several iterations to crash the kernel. The crash can be summarised as: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: [<ffffffff81279b08>] user_read+0x56/0xa3 ... Call Trace: [<ffffffff81276aa9>] keyctl_read_key+0xb6/0xd7 [<ffffffff81277815>] SyS_keyctl+0x83/0xe0 [<ffffffff815dbb97>] entry_SYSCALL_64_fastpath+0x12/0x6f Reported-by:
David Howells <dhowells@redhat.com> Tested-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Rainer Weikusat authored
[ Upstream commit 3822b5c2 ] With b3ca9b02, the AF_UNIX SOCK_STREAM receive code was changed from using mutex_lock(&u->readlock) to mutex_lock_interruptible(&u->readlock) to prevent signals from being delayed for an indefinite time if a thread sleeping on the mutex happened to be selected for handling the signal. But this was never a problem with the stream receive code (as opposed to its datagram counterpart) as that never went to sleep waiting for new messages with the mutex held and thus, wouldn't cause secondary readers to block on the mutex waiting for the sleeping primary reader. As the interruptible locking makes the code more complicated in exchange for no benefit, change it back to using mutex_lock. Signed-off-by:
Rainer Weikusat <rweikusat@mobileactivedefense.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 3036facb ] fou->udp_offloads is managed by RCU. As it is actually included inside the fou sockets, we cannot let the memory go out of scope before a grace period. We either can synchronize_rcu or switch over to kfree_rcu to manage the sockets. kfree_rcu seems appropriate as it is used by vxlan and geneve. Fixes: 23461551 ("fou: Support for foo-over-udp RX path") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by:
-
David S. Miller authored
[ Upstream commit 5233252f ] Signed-off-by:
-
WANG Cong authored
[ Upstream commit 09ccfd23 ] Reported-by:
Dmitry Vyukov <dvyukov@gmail.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Vlad Yasevich authored
[ Upstream commit f6548615 ] skb_reorder_vlan_header is called after the vlan header has been pulled. As a result the offset of the begining of the mac header has been incrased by 4 bytes (VLAN_HLEN). When moving the mac addresses, include this incrase in the offset calcualation so that the mac addresses are copied correctly. Fixes: a6e18ff1 (vlan: Fix untag operations of stacked vlans with REORDER_HEADER off) CC: Nicolas Dichtel <nicolas.dichtel@6wind.com> CC: Patrick McHardy <kaber@trash.net> Signed-off-by:
Vladislav Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Vlad Yasevich authored
[ Upstream commit a6e18ff1 ] When we have multiple stacked vlan devices all of which have turned off REORDER_HEADER flag, the untag operation does not locate the ethernet addresses correctly for nested vlans. The reason is that in case of REORDER_HEADER flag being off, the outer vlan headers are put back and the mac_len is adjusted to account for the presense of the header. Then, the subsequent untag operation, for the next level vlan, always use VLAN_ETH_HLEN to locate the begining of the ethernet header and that ends up being a multiple of 4 bytes short of the actuall beginning of the mac header (the multiple depending on the how many vlan encapsulations ethere are). As a reslult, if there are multiple levles of vlan devices with REODER_HEADER being off, the recevied packets end up being dropped. To solve this, we use skb->mac_len as the offset. The value is always set on receive path and starts out as a ETH_HLEN. The value is also updated when the vlan header manupations occur so we know it will be correct. Signed-off-by:
Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by:
-
