During online processing and setting up a DASD device, the configuration
data for operational paths is read and validated two times
(dasd_eckd_read_conf()). The first time to provide information that are
necessary for the LCU setup. A second time after the LCU setup as a
device might report different configuration data then.

When the configuration setup for each operational path is being
validated, an initial call to dasd_eckd_clear_conf_data() is issued.
This call wipes all previously available configuration data and path
information for each path.
However, the operational path mask is not updated during this process.

As a result, the stored operational path mask might no longer correspond
to the operational paths mask reported by the CIO layer, as several
paths might be gone between the two dasd_eckd_read_conf() calls.

This inconsistency leads to more severe issues in later path handling
changes. Fix this by removing the channel paths from the operational
path mask during the dasd_eckd_clear_conf_data() call.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Currently, the configuration data for a path is retrieved during a path
verification and used only temporarily. If a path is newly added to the
I/O setup after a boot, no configuration data will be stored for this
particular path.
However, this data is required for later use and should be present for
a valid I/O path anyway. Store this data during the path verification so
that newly added paths can provide all information necessary.

[sth@linux.ibm.com: fix conf_data memleak]
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

For storing retrieved path information both the if and else block in
dasd_eckd_read_conf() use the same code. To avoid duplicate code this
should be done after the if/else block. To further increase readability,
move the code to a new function, dasd_eckd_store_conf_data().
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The discipline argument in dasd_generic_probe() isn't used and there is
no history how it was used in the past. Remove it.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Fibre Channel Endpoint-Security event is received as an sei:nt0 type
in the CIO layer. This information needs to be shared with the
CCW device drivers using the path_events callback.
Co-developed-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Add an interface in the CIO layer to retrieve the information about the
Endpoint-Security Mode (ESM) of the specified CU. The ESM values are
defined as 0-None, 1-Authenticated or 2, 3-Encrypted.

[vneethv@linux.ibm.com: cleaned-up and modified description]
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Add a new sysfs attribute 'esc' per chpid. This new attribute exports
the Endpoint-Security-Capability byte of channel-path description block,
which could be 0-None, 1-Authentication, 2 and 3-Encryption.

For example:
$ cat /sys/devices/css0/chp0.34/esc
0

[vneethv@linux.ibm.com: cleaned-up & modified description]
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Switch the comment to talk about __register_blkdev instead of
register_blkdev and document the new probe parameter.

Fixes: 3da1a61e7046 ("block: add an optional probe callback to major_names")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Now that bdev_map is only used for finding gendisks, we can use
a simple xarray instead of the regions tracking structure for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Use separate gendisks (which share a tag_set) for the different operating
modes instead of redirecting the gendisk lookup using a probe callback.
This avoids potential problems with aliased block_device instances and
will eventually allow for removing the blk_register_region framework.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

reindent the driver using Lident as the code style was far away from
normal Linux code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The Atari floppy driver usually autodetects the media when used with the
ormal /dev/fd? devices, which also are the only nodes created by udev.
But it also supports various aliases that force a given media format.
That is currently supported using the blk_register_region framework
which finds the floppy gendisk even for a 'mismatched' dev_t.  The
problem with this (besides the code complexity) is that it creates
multiple struct block_device instances for the whole device of a
single gendisk, which can lead to interesting issues in code not
aware of that fact.

To fix this just create a separate gendisk for each of the aliases
if they are accessed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Use separate gendisks (which share a tag_set) for the native Amgiga vs
the MS-DOS mode instead of redirecting the gendisk lookup using a probe
callback.  This avoids potential problems with aliased block_device
instances and will eventually allow for removing the blk_register_region
framework.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The floppy driver usually autodetects the media when used with the
normal /dev/fd? devices, which also are the only nodes created by udev.
But it also supports various aliases that force a given media format.
That is currently supported using the blk_register_region framework
which finds the floppy gendisk even for a 'mismatched' dev_t.  The
problem with this (besides the code complexity) is that it creates
multiple struct block_device instances for the whole device of a
single gendisk, which can lead to interesting issues in code not
aware of that fact.

To fix this just create a separate gendisk for each of the aliases
if they are accessed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

ide is the last user of the blk_register_region framework except for the
tracking of allocated gendisk.  Switch to __register_blkdev, even if that
doesn't allow us to trivially find out which command set to probe for.
That means we now always request all modules when a user tries to access
an unclaimed ide device node, but except for a few potentially loaded
modules for a fringe use case of a deprecated and soon to be removed
driver that doesn't make a difference.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Use the simpler mechanism attached to major_name to allocate a md device
when a currently unregistered minor is accessed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Use the simpler mechanism attached to major_name to allocate a brd device
when a currently unregistered minor is accessed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Use the simpler mechanism attached to major_name to allocate a brd device
when a currently unregistered minor is accessed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Switch from using blk_register_region to the probe callback passed to
__register_blkdev to disable the request_module call for an unclaimed
dev_t in the SD majors.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The swim driver (unlike various other floppy drivers) doesn't have
magic device nodes for certain modes, and already registers a gendisk
for each of the floppies supported by a device.  Thus the region
registered is a no-op and can be removed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

There is no need to ever register the fake gendisk used for ide-tape.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Add a callback to the major_names array that allows a driver to override
how to probe for dev_t that doesn't currently have a gendisk registered.
This will help separating the lookup of the gendisk by dev_t vs probe
action for a not currently registered dev_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Instead of reusing the ranges in bdev_map, add a new helper that is
called if no ranges was found.  This is a first step to unpeel and
eventually remove the complex ranges structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Split the block_class_lock mutex into one each to protect bdev_map
and major_names.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Copy and paste the kobj_map functionality in the block code in preparation
for completely rewriting it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge three hidden gendisk checks into one.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Just open code it in the few callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Fold set_device_ro into its only remaining caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Use set_disk_ro instead of set_device_ro to match all other block
drivers and to ensure all partitions mirror the read-only flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Now that all drivers that want to hook into setting or clearing the
read-only flag use the set_read_only method, this code can be removed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Implement the ->set_read_only method instead of parsing the actual
ioctl command.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Implement the ->set_read_only method instead of parsing the actual
ioctl command.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Implement the ->set_read_only method instead of parsing the actual
ioctl command.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Add a new method to allow for driver-specific processing when setting or
clearing the block device read-only state.  This allows to replace the
cumbersome and error-prone override of the whole ioctl implementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

BLKFLSBUF is entirely contained in the block core, and there is no
good reason to give the driver a hook into processing it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

BLKFLSBUF is not supposed to actually send a flush command to the device,
but to tear down buffer cache structures.  Remove the mtd_blkdevs
implementation and just use the default semantics instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull drm fixes from Dave Airlie:
 "Nouveau fixes:

   - atomic modesetting regression fix

   - ttm pre-nv50 fix

   - connector NULL ptr deref fix"

* tag 'drm-fixes-2020-11-16' of git://anongit.freedesktop.org/drm/drm:
  drm/nouveau/kms/nv50-: Use atomic encoder callbacks everywhere
  drm/nouveau/ttm: avoid using nouveau_drm.ttm.type_vram prior to nv50
  drm/nouveau/kms: Fix NULL pointer dereference in nouveau_connector_detect_depth

- atomic modesetting regression fix
- ttm pre-nv50 fix
- connector NULL ptr deref fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv5D9p78MNN0OxVeRZxN8LDqcadJEGUEFCgWJQ6+_rjPuw@mail.gmail.com

Pull char/misc driver fixes from Greg KH:
 "Here are some small char/misc/whatever driver fixes for 5.10-rc4.

  Nothing huge, lots of small fixes for reported issues:

   - habanalabs driver fixes

   - speakup driver fixes

   - uio driver fixes

   - virtio driver fix

   - other tiny driver fixes

  Full details are in the shortlog.

  All of these have been in linux-next for a full week with no reported
  issues"

* tag 'char-misc-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  uio: Fix use-after-free in uio_unregister_device()
  firmware: xilinx: fix out-of-bounds access
  nitro_enclaves: Fixup type and simplify logic of the poll mask setup
  speakup ttyio: Do not schedule() in ttyio_in_nowait
  speakup: Fix clearing selection in safe context
  speakup: Fix var_id_t values and thus keymap
  virtio: virtio_console: fix DMA memory allocation for rproc serial
  habanalabs/gaudi: mask WDT error in QMAN
  habanalabs/gaudi: move coresight mmu config
  habanalabs: fix kernel pointer type
  mei: protect mei_cl_mtu from null dereference