- 18 Aug, 2016 17 commits
-
-
Chris Wilson authored
As we cannot access the backing pages behind stolen objects, we should not attempt to do so for relocations. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-15-chris@chris-wilson.co.uk
-
Chris Wilson authored
If we cannot pin the entire object into the mappable region of the GTT, try to pin a single page instead. This is much more likely to succeed, and prevents us falling back to the clflush slow path. Signed-off-by:
-
Chris Wilson authored
With the introduction of the reloc page cache, we are just one step away from refactoring the relocation write functions into one. Not only does it tidy the code (slightly), but it greatly simplifies the control logic much to gcc's satisfaction. v2: Add selftests to document the relationship between the clflush flags, the KMAP bit and packing into the page-aligned pointer. Signed-off-by:
-
Chris Wilson authored
Since we know the write domain, we can drop the local variable and make the code look a tiny bit simpler. Signed-off-by:
-
Chris Wilson authored
There is an improbable, but not impossible, case that if we leave the pages unpin as we operate on the object, then somebody via the shrinker may steal the lock (which lock? right now, it is struct_mutex, THE lock) and change the cache domains after we have already inspected them. (Whilst here, avail ourselves of the opportunity to take a couple of steps to make the two functions look more similar.) Signed-off-by:
-
Chris Wilson authored
If we quickly switch from writing through the GTT to a read of the physical page directly with the CPU (e.g. performing relocations through the GTT and then running the command parser), we can observe that the writes are not visible to the CPU. It is not a coherency problem, as extensive investigations with clflush have demonstrated, but a mere timing issue - we have to wait for the GTT to complete it's write before we start our read from the CPU. The issue can be illustrated in userspace with: gtt = gem_mmap__gtt(fd, handle, 0, OBJECT_SIZE, PROT_READ | PROT_WRITE); cpu = gem_mmap__cpu(fd, handle, 0, OBJECT_SIZE, PROT_READ | PROT_WRITE); gem_set_domain(fd, handle, I915_GEM_DOMAIN_GTT, I915_GEM_DOMAIN_GTT); for (i = 0; i < OBJECT_SIZE / 64; i++) { int x = 16*i + (i%16); gtt[x] = i; clflush(&cpu[x], sizeof(cpu[x])); assert(cpu[x] == i); } Experimenting with that shows that this behaviour is indeed limited to recent Atom-class hardware. Testcase: igt/gem_exec_flush/basic-batch-default-cmd #byt Signed-off-by: -
Chris Wilson authored
If we want to read the pages directly via the CPU, we have to be sure that we have to flush the writes via the GTT (as the CPU can not see the address aliasing). Signed-off-by:
-
Chris Wilson authored
This is a companion to i915_gem_obj_prepare_shmem_read() that prepares the backing storage for direct writes. It first serialises with the GPU, pins the backing storage and then indicates what clfushes are required in order for the writes to be coherent. Whilst here, fix support for ancient CPUs without clflush for which we cannot do the GTT+clflush tricks. v2: Add i915_gem_obj_finish_shmem_access() for symmetry Signed-off-by:
-
Chris Wilson authored
When doing relocations, we have to obtain a mapping to the page containing the target address. This is either a kmap or iomap depending on GPU and its cache coherency. Neighbouring relocation entries are typically within the same page and so we can cache our kmapping between them and avoid those pesky TLB flushes. Note that there is some sleight-of-hand in how the slow relocate works as the reloc_entry_cache implies pagefaults disabled (as we are inside a kmap_atomic section). However, the slow relocate code is meant to be the fallback from the atomic fast path failing. Fortunately it works as we already have performed the copy_from_user for the relocation array (no more pagefaults there) and the kmap_atomic cache is enabled after we have waited upon an active buffer (so no more sleeping in atomic). Magic! Signed-off-by:
-
Chris Wilson authored
If we cannot release the fence (for example if someone is inexplicably trying to write into a tiled framebuffer that is currently pinned to the display! *cough* kms_frontbuffer_tracking *cough*) fallback to using the page-by-page pwrite/pread interface, rather than fail the syscall entirely. Since this is triggerable by the user (along pwrite) we have to remove the WARN_ON(fence->pin_count). Signed-off-by:
-
Chris Wilson authored
Similarly to invalidating beforehand, if the object is mmapped via I915_MMAP_WC we cannot track writes through the I915_GEM_DOMAIN_GTT. At the conclusion of the write, i915_gem_object_flush_gtt_writes() we also need to treat the origin carefully in case it may have been untracked. See also commit aeecc969 ("drm/i915: use ORIGIN_CPU for frontbuffer invalidation on WC mmaps"). Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-5-chris@chris-wilson.co.uk
-
Chris Wilson authored
As pwrite does not use the fence for its GTT access, and may even go through a secondary interface avoiding the main VMA, we cannot treat the write as automatically invalidated by the hardware and so we require ORIGIN_CPU frontbufer invalidate/flushes. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Chris Wilson authored
Since vfree() now likes to WARN when passed a non-page-aligned pointer, we need to discard the low bits to comply with it. Fixes: d31d7cb1 ("drm/i915: Support for creating write combined type vmaps") Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
-
Chris Wilson authored
After we update one PTE for a page, the caller expects to be able to immediately use that through a GGTT read/write. To comply with the callers expectations we therefore need to flush the chipset buffers before returning. Reported-by:
Matti Hämäläinen <ccr@tnsp.org> Fixes: d6473f56 ("drm/i915: Add support for mapping an object page...") Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
If userspace is asynchronously streaming into the batch or other execobjects, we may not flush those writes along with a change in cache domain (as there is no change). Therefore those writes may end up in internal chipset buffers and not visible to the GPU upon execution. We must issue a flush command or otherwise we encounter incoherency in the batchbuffers and the GPU executing invalid commands (i.e. hanging) quite regularly. v2: Throw a paranoid wmb() into the general flush so that we remain consistent with before. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90841 Fixes: 1816f923 ("drm/i915: Support creation of unbound wc user...") Signed-off-by:
-
Matt Roper authored
It's possible to have a non-zero plane mask and still wind up with a total data rate of zero. There are two cases where this can happen: * planes are active (from the KMS point of view), but are all fully clipped (positioned offscreen) * the only active plane on a CRTC is the cursor (which is handled independently and not counted into the general data rate computations These are both valid display setups (although unusual), so we need to drop the WARN(). Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Testcase: kms_universal_planes.cursor-only-pipe-* Signed-off-by:
-
Matt Roper authored
intel_state->active_crtcs is usually only initialized when doing a modeset. During our first atomic commit after boot, we're effectively faking a modeset to sanitize the DDB/wm setup, so ensure that this field gets initialized before use. v2: - Don't clobber active_crtcs if our first commit really is a modeset (Maarten) - Grab connection_mutex when faking a modeset during sanitization (Maarten) Reported-by:
Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
- 17 Aug, 2016 6 commits
-
-
Chris Wilson authored
Brief parameter text to describe @engines. Signed-off-by:
-
Chris Wilson authored
In commit 247177dd ("drm/i915: Always set the vma->pages"), as it title implies, we always set vma->pages for bound objects. Even before that, we would set vma->ggtt_view.pages, for globally bound objects. This was forgotten for the fixup inside the preallocated stolen objects, which has to recreate a global GTT binding outside of the usual VMA insertion path Fixes: 247177dd ("drm/i915: Always set the vma->pages") Signed-off-by:
-
Chris Wilson authored
Local function with forgotten static declaration. Fixes: 19625e85 ("drm/i915: Enable polling when we don't have hpd") Signed-off-by:
-
Chris Wilson authored
Silence sparse who warns that the global variable is not declared static. Fixes: 0b1de5d5 ("drm/i915: Use SSE4.1 movntdqa to ...") Signed-off-by:
-
Tvrtko Ursulin authored
Build the legacy semaphore initialisation array using the engine hardware ids instead of driver internal ones. This makes the static array size dependent only on the number of gen6 semaphore engines. Also makes the per-engine semaphore wait and signal tables hardware id indexed saving some more space. v2: Refactor I915_GEN6_NUM_ENGINES to GEN6_SEMAPHORE_LAST. (Chris Wilson) v3: More polish. (Chris Wilson) Signed-off-by:
-
Tvrtko Ursulin authored
Put the engine hardware id in the common header so they are not only associated with the GuC since they are needed for the legacy semaphores implementation. Signed-off-by:
-
- 16 Aug, 2016 2 commits
-
-
Chris Wilson authored
Just make the logic simple enough for even GCC to understand (and foolproof against random changes): drivers/gpu/drm/i915/intel_runtime_pm.c: warning: 'cmn_a_well' may be used uninitialized in this function [-Wuninitialized]: => 871:23 Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Imre Deak <imre.deak@intel.com>
-
Chris Wilson authored
Daniel Vetter proposed a new challenge to the serialisation inside the busy-ioctl that exposed a flaw that could result in us reporting the wrong engine as being busy. If the request is reallocated as we test its busyness and then reassigned to this object by another thread, we would not notice that the test itself was incorrect. We are faced with a choice of using __i915_gem_active_get_request_rcu() to first acquire a reference to the request preventing the race, or to acknowledge the race and accept the limitations upon the accuracy of the busy flags. Note that we guarantee that we never falsely report the object as idle (providing userspace itself doesn't race), and so the most important use of the busy-ioctl and its guarantees are fulfilled. Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471337440-16777-1-git-send-email-chris@chris-wilson.co.uk
-
- 15 Aug, 2016 15 commits
-
-
Chris Wilson authored
Reported-by: 0day kbuild test robot Fixes: 2bd160a1 ("drm/i915: Reduce i915_gem_objects to only show...") Signed-off-by:
-
Chris Wilson authored
Just another useful register to inspect following a GPU hang. v2: Remove partial decoding of RING_MODE to userspace, be consistent and use GEN > 2 guards around RING_MODE everywhere. Signed-off-by:
-
Chris Wilson authored
There is no other state pertaining to the completed requests in the hang, other than gleamed through the ringbuffer, so including the expired requests in the list of outstanding requests simply adds noise. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-31-git-send-email-chris@chris-wilson.co.uk
-
Chris Wilson authored
It is useful when looking at captured error states to check the recorded BBADDR register (the address of the last batchbuffer instruction loaded) against the expected offset of the batch buffer, and so do a quick check that (a) the capture is true or (b) HEAD hasn't wandered off into the badlands. Signed-off-by:
-
Chris Wilson authored
Since contexts are not currently shared between userspace processes, we have an exact correspondence between context creator and guilty batch submitter. Therefore we can save some per-batch work by inspecting the context->pid upon error instead. Note that we take the context's creator's pid rather than the file's pid in order to better track fd passed over sockets. Signed-off-by:
-
Chris Wilson authored
This little helper only exists to safely discard the upper unused 32bits of the general 64-bit VMA address - as we know that all Global GTT currently are less than 4GiB in size and so that the upper bits must be zero. In many places, we use a u32 for the global GTT offset and we want to document where we are discarding the full VMA offset. Signed-off-by:
-
Chris Wilson authored
Treat the VMA as the primary struct responsible for tracking bindings into the GPU's VM. That is we want to treat the VMA returned after we pin an object into the VM as the cookie we hold and eventually release when unpinning. Doing so eliminates the ambiguity in pinning the object and then searching for the relevant pin later. v2: Joonas' stylistic nitpicks, a fun rebase. Signed-off-by:
-
Chris Wilson authored
In a few places, we repeat a call to clear a pointer to a vma whilst unpinning and releasing a reference to its owner. Refactor those into a common function. Signed-off-by:
-
Chris Wilson authored
Signed-off-by:
-
Chris Wilson authored
Signed-off-by:
-
Chris Wilson authored
Signed-off-by:
-
Chris Wilson authored
Signed-off-by:
-
Chris Wilson authored
Since the intel_engine_init_seqno() is shared by all engine submission backends, move it out of the legacy intel_ringbuffer.c and into the new home for common routines, intel_engine_cs.c Signed-off-by:
-
Chris Wilson authored
Since the scratch allocation and cleanup is shared by all engine submission backends, move it out of the legacy intel_ringbuffer.c and into the new home for common routines, intel_engine_cs.c Signed-off-by:
-
Chris Wilson authored
Signed-off-by:
-
