1. 11 Jul, 2007 13 commits
    • Rafael J. Wysocki's avatar
      PM: Simplify suspend_device · 9e584a4f
      Rafael J. Wysocki authored
      Reduce code duplication in drivers/base/suspend.c by introducing a separate
      function for printing diagnostic messages.
      Signed-off-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
      Acked-by: default avatarPavel Machek <pavel@ucw.cz>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      9e584a4f
    • Rafael J. Wysocki's avatar
      PM: Remove saved_state from struct dev_pm_info · cc490069
      Rafael J. Wysocki authored
      The saved_state member of struct dev_pm_info, defined in include/linux/pm.h, is
      not used anywhere, so it can be removed.
      Signed-off-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      cc490069
    • Rafael J. Wysocki's avatar
      PM: Remove pm_parent from struct dev_pm_info · 9cddad77
      Rafael J. Wysocki authored
      The pm_parent member of struct dev_pm_info (defined in include/linux/pm.h) is
      only used to check if the device's parent is in the right state while the
      device is being suspended or resumed.  However, this can be done just as well
      with the help of the parent pointer in struct device, so pm_parent can be
      removed along with some code that handles it.
      Signed-off-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
      Acked-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      9cddad77
    • Matthias Kaehlcke's avatar
      Power Management: use mutexes instead of semaphores · 11048dcf
      Matthias Kaehlcke authored
      The Power Management code uses semaphores as mutexes.  Use the mutex API
      instead of the (binary) semaphores.
      Signed-off-by: default avatarMatthias Kaehlcke <matthias.kaehlcke@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      11048dcf
    • Matthias Kaehlcke's avatar
      sysdev: use mutex instead of semaphore · 9f3f776b
      Matthias Kaehlcke authored
      The sysdev code use a semaphore as mutex.  Use the mutex API instead of the
      (binary) semaphore.
      Signed-off-by: default avatarMatthias Kaehlcke <matthias.kaehlcke@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      9f3f776b
    • Kay Sievers's avatar
      Driver core: add missing kset uevent · 80f03e34
      Kay Sievers authored
      We get uevents for a bus/class going away, but not one registering.
      Add the missing uevent in kset_register(), which will send an
      event for a new bus/class. Suppress all unwanted uevents for bus
      subdirectories like /bus/*/devices/, /bus/*/drivers/.
      
      Now we get for module usbcore:
        add      /module/usbcore (module)
        add      /bus/usb (bus)
        add      /class/usb_host (class)
        add      /bus/usb/drivers/hub (drivers)
        add      /bus/usb/drivers/usb (drivers)
        remove   /bus/usb/drivers/usb (drivers)
        remove   /bus/usb/drivers/hub (drivers)
        remove   /class/usb_host (class)
        remove   /bus/usb (bus)
        remove   /module/usbcore (module)
      
      instead of:
        add      /module/usbcore (module)
        add      /bus/usb/drivers/hub (drivers)
        add      /bus/usb/drivers/usb (drivers)
        remove   /bus/usb/drivers/usb (drivers)
        remove   /bus/usb/drivers/hub (drivers)
        remove   /class/usb_host (class)
        remove   /bus/usb/drivers (bus)
        remove   /bus/usb/devices (bus)
        remove   /bus/usb (bus)
        remove   /module/usbcore (module)
      Signed-off-by: default avatarKay Sievers <kay.sievers@vrfy.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      80f03e34
    • Lennart Poettering's avatar
      DMI-based module autoloading · 4f5c791a
      Lennart Poettering authored
      The patch below adds DMI/SMBIOS based module autoloading to the Linux
      kernel. The idea is to load laptop drivers automatically (and other
      drivers which cannot be autoloaded otherwise), based on the DMI system
      identification information of the BIOS.
      
      Right now most distros manually try to load all available laptop
      drivers on bootup in the hope that at least one of them loads
      successfully. This patch does away with all that, and uses udev to
      automatically load matching drivers on the right machines.
      
      Basically the patch just exports the DMI information that has been
      parsed by the kernel anyway to userspace via a sysfs device
      /sys/class/dmi/id and makes sure that proper modalias attributes are
      available. Besides adding the "modalias" attribute it also adds
      attributes for a few other DMI fields which might be useful for
      writing udev rules.
      
      This patch is not an attempt to export the entire DMI/SMBIOS data to
      userspace. We already have "dmidecode" which parses the complete DMI
      info from userspace. The purpose of this patch is machine model
      identification and good udev integration.
      
      To take advantage of DMI based module autoloading, a driver should
      export one or more MODULE_ALIAS fields similar to these:
      
      MODULE_ALIAS("dmi:*:svnMICRO-STARINT'LCO.,LTD:pnMS-1013:pvr0131*:cvnMICRO-STARINT'LCO.,LTD:ct10:*");
      MODULE_ALIAS("dmi:*:svnMicro-StarInternational:pnMS-1058:pvr0581:rvnMSI:rnMS-1058:*:ct10:*");
      MODULE_ALIAS("dmi:*:svnMicro-StarInternational:pnMS-1412:*:rvnMSI:rnMS-1412:*:cvnMICRO-STARINT'LCO.,LTD:ct10:*");
      MODULE_ALIAS("dmi:*:svnNOTEBOOK:pnSAM2000:pvr0131*:cvnMICRO-STARINT'LCO.,LTD:ct10:*");
      
      These lines are specific to my msi-laptop.c driver. They are basically
      just a concatenation of a few carefully selected DMI fields with all
      potentially bad characters stripped.
      
      Besides laptop drivers, modules like "hdaps", the i2c modules
      and the hwmon modules are good candidates for "dmi:" MODULE_ALIAS
      lines.
      
      Besides merely exporting the DMI data via sysfs the patch adds
      support for a few more DMI fields. Especially the CHASSIS fields are
      very useful to identify different laptop modules. The patch also adds
      working MODULE_ALIAS lines to my msi-laptop.c driver.
      
      I'd like to thank Kay Sievers for helping me to clean up this patch
      for posting it on lkml.
      
      Patch is against Linus' current GIT HEAD. Should probably apply to
      older kernels as well without modification.
      Signed-off-by: default avatarLennart Poettering <mzxreary@0pointer.de>
      Signed-off-by: default avatarKay Sievers <kay.sievers@vrfy.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
      
      4f5c791a
    • Jan Kara's avatar
      debugfs: add rename for debugfs files · cfc94cdf
      Jan Kara authored
      Implement debugfs_rename() to allow renaming files/directories in debugfs.
      Signed-off-by: default avatarJan Kara <jack@suse.cz>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      cfc94cdf
    • Kay Sievers's avatar
      Rules on how to use sysfs in userspace programs · 46336009
      Kay Sievers authored
      Here's a document to help clear things up.
      Signed-off-by: default avatarKay Sievers <kay.sievers@vrfy.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      46336009
    • Alan Cox's avatar
      lots-of-architectures: enable arbitary speed tty support · 4eb6bf6b
      Alan Cox authored
      Add the termios2 structure ready for enabling on most platforms.  One or
      two like Sparc are plain weird so have been left alone.  Most can use the
      same structure as ktermios for termios2 (ie the newer ioctl uses the
      structure matching the current kernel structure)
      Signed-off-by: default avatarAlan Cox <alan@redhat.com>
      Cc: Bryan Wu <bryan.wu@analog.com>
      Cc: Ian Molton <spyro@f2s.com>
      Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
      Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
      Cc: Mikael Starvik <starvik@axis.com>
      Cc: David Howells <dhowells@redhat.com>
      Cc: "Luck, Tony" <tony.luck@intel.com>
      Cc: Hirokazu Takata <takata@linux-m32r.org>
      Cc: Geert Uytterhoeven <geert@linux-m68k.org>
      Cc: Roman Zippel <zippel@linux-m68k.org>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Kyle McMartin <kyle@mcmartin.ca>
      Cc: Matthew Wilcox <willy@debian.org>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Paul Mundt <lethal@linux-sh.org>
      Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
      Cc: Richard Curnow <rc@rc0.org.uk>
      Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
      Cc: Chris Zankel <chris@zankel.net>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      4eb6bf6b
    • Pavel Emelianov's avatar
      Make common helpers for seq_files that work with list_heads · bcf67e16
      Pavel Emelianov authored
      Many places in kernel use seq_file API to iterate over a regular list_head.
      The code for such iteration is identical in all the places, so it's worth
      introducing a common helpers.
      
      This makes code about 300 lines smaller:
      
      The first version of this patch made the helper functions static inline
      in the seq_file.h header. This patch moves them to the fs/seq_file.c as
      Andrew proposed. The vmlinux .text section sizes are as follows:
      
      2.6.22-rc1-mm1:              0x001794d5
      with the previous version:   0x00179505
      with this patch:             0x00179135
      
      The config file used was make allnoconfig with the "y" inclusion of all
      the possible options to make the files modified by the patch compile plus
      drivers I have on the test node.
      
      This patch:
      
      Many places in kernel use seq_file API to iterate over a regular list_head.
      The code for such iteration is identical in all the places, so it's worth
      introducing a common helpers.
      Signed-off-by: default avatarPavel Emelianov <xemul@openvz.org>
      Cc: "David S. Miller" <davem@davemloft.net>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      bcf67e16
    • Jiri Slaby's avatar
      sx: switch subven and subid values · c14d444b
      Jiri Slaby authored
      sx.c is failing to locate Graham's card.
      Signed-off-by: default avatarJiri Slaby <jirislaby@gmail.com>
      Cc: Graham Murray <gmurray@webwayone.co.uk>
      Cc: <stable@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      c14d444b
    • Richard Purdie's avatar
      Add LZO1X algorithm to the kernel · 64c70b1c
      Richard Purdie authored
      This is a hybrid version of the patch to add the LZO1X compression
      algorithm to the kernel.  Nitin and myself have merged the best parts of
      the various patches to form this version which we're both happy with (and
      are jointly signing off).
      
      The performance of this version is equivalent to the original minilzo code
      it was based on.  Bytecode comparisons have also been made on ARM, i386 and
      x86_64 with favourable results.
      
      There are several users of LZO lined up including jffs2, crypto and reiser4
      since its much faster than zlib.
      Signed-off-by: default avatarNitin Gupta <nitingupta910@gmail.com>
      Signed-off-by: default avatarRichard Purdie <rpurdie@openedhand.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      64c70b1c
  2. 10 Jul, 2007 27 commits
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc · 4c75f741
      Linus Torvalds authored
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
        mmc: at91_mci: fix hanging and rework to match flowcharts
        mmc: at91_mci typo
        sdhci: Fix "Unexpected interrupt" handling
        mmc: fix silly copy-and-paste error
        mmc: move layer init and workqueue to core file
        mmc: refactor host class handling
        mmc: refactor bus operations
        sdhci: add ene controller id
        mmc: bounce requests for simple hosts
      4c75f741
    • Linus Torvalds's avatar
      Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 · 6ed911fb
      Linus Torvalds authored
      * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (40 commits)
        bonding/bond_main.c: make 2 functions static
        ps3: gigabit ethernet driver for PS3, take3
        [netdrvr] Fix dependencies for ax88796 ne2k clone driver
        eHEA: Capability flag for DLPAR support
        Remove sk98lin ethernet driver.
        sunhme.c:quattro_pci_find() must be __devinit
        bonding / ipv6: no addrconf for slaves separately from master
        atl1: remove write-only var in tx handler
        macmace: use "unsigned long flags;"
        Cleanup usbnet_probe() return value handling
        netxen: deinline and sparse fix
        eeprom_93cx6: shorten pulse timing to match spec (bis)
        phylib: Add Marvell 88E1112 phy id
        phylib: cleanup marvell.c a bit
        AX88796 network driver
        IOC3: Switch to pci refcounting safe APIs
        e100: Fix Tyan motherboard e100 not receiving IPMI commands
        QE Ethernet driver writes to wrong register to mask interrupts
        rrunner.c:rr_init() must be __devinit
        tokenring/3c359.c:xl_init() must be __devinit
        ...
      6ed911fb
    • Linus Torvalds's avatar
      Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev · 64b853aa
      Linus Torvalds authored
      * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (32 commits)
        [libata] sata_mv: print out additional chip info during probe
        [libata] Use ATA_UDMAx standard masks when filling driver's udma_mask info
        [libata] AHCI: Add support for Marvell AHCI-like chips (initially 6145)
        [libata] Clean up driver udma_mask initializers
        libata: Support chips with 64K PRD quirk
        Add a PCI ID for santa rosa's PATA controller.
        sata_sil24: sil24_interrupt() micro-optimisation
        Add irq_flags to struct pata_platform_info
        sata_promise: cleanups
        [libata] pata_ixp4xx: kill unused var
        ata_piix: fix pio/mwdma programming
        [libata] ahci: minor internal cleanups
        [ATA] Add named constant for ATAPI command DEVICE RESET
        [libata] sata_sx4, sata_via: minor documentation updates
        [libata] ahci: minor internal cleanups
        [libata] ahci: Factor out SATA port init into a separate function
        [libata] pata_sil680: minor cleanups from benh
        [libata] sata_sx4: named constant cleanup
        [libata] pata_ixp4xx: convert to new EH
        [libata] pdc_adma: Reorder initializers with a couple structs
        ...
      64b853aa
    • Linus Torvalds's avatar
      Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus · 0f166396
      Linus Torvalds authored
      * 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (62 commits)
        [MIPS] PNX8550: Cleanup proc code.
        [MIPS] WRPPMC: Fix build.
        [MIPS] Yosemite: Fix modpost warnings.
        [MIPS] Change names of local variables to silence sparse
        [MIPS] SB1: Fix modpost warning.
        [MIPS] PNX: Fix modpost warnings.
        [MIPS] Alchemy: Fix modpost warnings.
        [MIPS] Non-FPAFF: Fix warning.
        [MIPS] DEC: Fix modpost warning.
        [MIPS] MIPSsim: Enable MIPSsim virtual network driver.
        [MIPS] Delete Ocelot 3 support.
        [MIPS] remove LASAT Networks platforms support
        [MIPS] Early check for SMTC kernel on non-MT processor
        [MIPS] Add debugfs files to show fpuemu statistics
        [MIPS] Add some debugfs files to debug unaligned accesses
        [MIPS] rbtx4938: Fix secondary PCIC and glue internal NICs
        [MIPS] tc35815: Load MAC address via platform_device
        [MIPS] Move FPU affinity code into separate file.
        [MIPS] Make ioremap() work on TX39/49 special unmapped segment
        [MIPS] rbtx4938: Update and minimize defconfig
        ...
      0f166396
    • Linus Torvalds's avatar
      Merge git://git.infradead.org/~dwmw2/battery-2.6 · 5f60cfd9
      Linus Torvalds authored
      * git://git.infradead.org/~dwmw2/battery-2.6:
        [BATTERY] ds2760 W1 slave
        [BATTERY] One Laptop Per Child power/battery driver
        [BATTERY] Apple PMU driver
        [BATTERY] 1-Wire ds2760 chip battery driver
        [BATTERY] APM emulation driver for class batteries
        [BATTERY] pda_power platform driver
        [BATTERY] Universal power supply class (was: battery class)
      5f60cfd9
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6 · 9f9d7632
      Linus Torvalds authored
      * 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
        [S390] vmlogrdr function annotation.
        [S390] s390: rename CPU_IDLE to S390_CPU_IDLE
        [S390] cio: Remove prototype for non-existing function cmf_reset().
        [S390] zcrypt: fix request timeout handling
        [S390] system call optimization.
        [S390] dasd: Avoid compile warnings on !CONFIG_DASD_PROFILE
        [S390] Remove volatile from atomic_t
        [S390] Program check in diag 210 under 31 bit
        [S390] Bogomips calculation for 64 bit.
        [S390] smp: Merge smp_count_cpus() and smp_get_save_areas().
        [S390] zcore: Fix __user annotation.
        [S390] fixed cdl-format detection.
        [S390] sclp: Test facility list before executing a service call.
        [S390] sclp: introduce some new interfaces.
        [S390] Fixed comment typo.
        [S390] vmcp cleanup
      9f9d7632
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw · 1b21f458
      Linus Torvalds authored
      * git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (57 commits)
        [GFS2] Accept old format NFS filehandles
        [GFS2] Small fixes to logging code
        [DLM] dump more lock values
        [GFS2] Remove i_mode passing from NFS File Handle
        [GFS2] Obtaining no_formal_ino from directory entry
        [GFS2] git-gfs2-nmw-build-fix
        [GFS2] System won't suspend with GFS2 file system mounted
        [GFS2] remounting w/o acl option leaves acls enabled
        [GFS2] inode size inconsistency
        [DLM] Telnet to port 21064 can stop all lockspaces
        [GFS2] Fix gfs2_block_truncate_page err return
        [GFS2] Addendum to the journaled file/unmount patch
        [GFS2] Simplify multiple glock aquisition
        [GFS2] assertion failure after writing to journaled file, umount
        [GFS2] Use zero_user_page() in stuffed_readpage()
        [GFS2] Remove bogus '\0' in rgrp.c
        [GFS2] Journaled file write/unstuff bug
        [DLM] don't require FS flag on all nodes
        [GFS2] Fix deallocation issues
        [GFS2] return conflicts for GETLK
        ...
      1b21f458
    • Linus Torvalds's avatar
      Merge branch 'splice-2.6.23' of git://git.kernel.dk/data/git/linux-2.6-block · 01370f06
      Linus Torvalds authored
      * 'splice-2.6.23' of git://git.kernel.dk/data/git/linux-2.6-block:
        pipe: add documentation and comments
        pipe: change the ->pin() operation to ->confirm()
        Remove remnants of sendfile()
        xip sendfile removal
        splice: completely document external interface with kerneldoc
        sendfile: remove bad_sendfile() from bad_file_ops
        shmem: convert to using splice instead of sendfile()
        relay: use splice_to_pipe() instead of open-coding the pipe loop
        pipe: allow passing around of ops private pointer
        splice: divorce the splice structure/function definitions from the pipe header
        splice: relay support
        sendfile: convert nfsd to splice_direct_to_actor()
        sendfile: convert nfs to using splice_read()
        loop: convert to using splice_direct_to_actor() instead of sendfile()
        splice: add void cookie to the actor data
        sendfile: kill generic_file_sendfile()
        sendfile: remove .sendfile from filesystems that use generic_file_sendfile()
        sys_sendfile: switch to using ->splice_read, if available
        vmsplice: add vmsplice-to-user support
        splice: abstract out actor data
      01370f06
    • Linus Torvalds's avatar
      Merge branch 'trivial-2.6.23' of git://git.kernel.dk/data/git/linux-2.6-block · 5cbc39a7
      Linus Torvalds authored
      * 'trivial-2.6.23' of git://git.kernel.dk/data/git/linux-2.6-block:
        Documentation/block/barrier.txt is not in sync with the actual code: - blk_queue_ordered() no longer has a gfp_mask parameter - blk_queue_ordered_locked() no longer exists - sd_prepare_flush() looks slightly different
        Use list_for_each_entry() instead of list_for_each() in the block device
        Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu",
        block/Kconfig already has its own "menuconfig" so remove these
        Use menuconfigs instead of menus, so the whole menu can be disabled at once
        cfq-iosched: fix async queue behaviour
        unexport bio_{,un}map_user
        Remove legacy CDROM drivers
        [PATCH] fix request->cmd == INT cases
        cciss: add new controller support for P700m
        [PATCH] Remove acsi.c
        [BLOCK] drop unnecessary bvec rewinding from flush_dry_bio_endio
        [PATCH] cdrom_sysctl_info fix
        blk_hw_contig_segment(): bad segment size checks
        [TRIVIAL PATCH] Kill blk_congestion_wait() stub for !CONFIG_BLOCK
      5cbc39a7
    • Adrian Bunk's avatar
      bonding/bond_main.c: make 2 functions static · 4ad072c9
      Adrian Bunk authored
      Signed-off-by: default avatarAdrian Bunk <bunk@stusta.de>
      Cc: Chad Tindel <ctindel@users.sourceforge.net>
      Cc: Jay Vosburgh <fubar@us.ibm.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
      4ad072c9
    • Masakazu Mokuno's avatar
      ps3: gigabit ethernet driver for PS3, take3 · 02c18891
      Masakazu Mokuno authored
      Hi,
      
      This is the third submission of the network driver for PS3.
      The differences from the previous one are:
      
        - renamed source file names so that their prefix can match
          with the module name
        - added cbe-oss-dev@ozlabs.org line for MAINTAINER file
        - changed some in copyright comments
      
      If there are no more comments, please apply for 2.6.23.
      
      Thank you
      
      --
      Subject: PS3: Ethernet driver
      
      From: Masakazu Mokuno <mokuno@sm.sony.co.jp>
      
      Add Gigabit Ethernet support for the PS3 game console.  The module will
      be called ps3_gelic.
      
      CC: Geoff Levand <geoffrey.levand@am.sony.com>
      Signed-off-by: default avatarMasakazu Mokuno <mokuno@sm.sony.co.jp>
      Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
      02c18891
    • Jeff Garzik's avatar
      [netdrvr] Fix dependencies for ax88796 ne2k clone driver · def47c50
      Jeff Garzik authored
      It needs writesb(), not available on all platforms.
      Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
      def47c50
    • Jan-Bernd Themann's avatar
      eHEA: Capability flag for DLPAR support · 4c3ca4da
      Jan-Bernd Themann authored
      This patch introduces a capability flag that is used by the DLPAR userspace
      tool to check which DLPAR features are supported by the eHEA driver.
      
      Missing goto has been included.
      Signed-off-by: default avatarJan-Bernd Themann <themann@de.ibm.com>
      Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
      4c3ca4da
    • Jeff Garzik's avatar
      Remove sk98lin ethernet driver. · e1abecc4
      Jeff Garzik authored
      Unmaintained, superceded by skge.
      
      Prodded to deletion by Adrian Bunk.  Acked by Stephen Hemminger.
      Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
      e1abecc4
    • Adrian Bunk's avatar
      sunhme.c:quattro_pci_find() must be __devinit · cd6f5b80
      Adrian Bunk authored
      This patch fixes the following section mismatch:
      
      <--  snip  -->
      
      ...
        MODPOST vmlinux
      WARNING: drivers/built-in.o(.text+0x272f8b): Section mismatch: reference to .init.text:quattro_pci_find (between 'happy_meal_pci_probe' and 'happy_meal_pci_remove')
      ...
      
      <--  snip  -->
      Signed-off-by: default avatarAdrian Bunk <bunk@stusta.de>
      Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
      cd6f5b80
    • Jay Vosburgh's avatar
      bonding / ipv6: no addrconf for slaves separately from master · c2edacf8
      Jay Vosburgh authored
      	At present, when a device is enslaved to bonding, if ipv6 is
      active then addrconf will be initated on the slave (because it is closed
      then opened during the enslavement processing).  This causes DAD and RS
      packets to be sent from the slave.  These packets in turn can confuse
      switches that perform ipv6 snooping, causing them to incorrectly update
      their forwarding tables (if, e.g., the slave being added is an inactve
      backup that won't be used right away) and direct traffic away from the
      active slave to a backup slave (where the incoming packets will be
      dropped).
      
      	This patch alters the behavior so that addrconf will only run on
      the master device itself.  I believe this is logically correct, as it
      prevents slaves from having an IPv6 identity independent from the
      master.  This is consistent with the IPv4 behavior for bonding.
      
      	This is accomplished by (a) having bonding set IFF_SLAVE sooner
      in the enslavement processing than currently occurs (before open, not
      after), and (b) having ipv6 addrconf ignore UP and CHANGE events on
      slave devices.
      
      	The eql driver also uses the IFF_SLAVE flag.  I inspected eql,
      and I believe this change is reasonable for its usage of IFF_SLAVE, but
      I did not test it.
      Signed-off-by: default avatarJay Vosburgh <fubar@us.ibm.com>
      Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
      c2edacf8
    • Alexey Dobriyan's avatar
      atl1: remove write-only var in tx handler · 89c0d26b
      Alexey Dobriyan authored
      Signed-off-by: default avatarAlexey Dobriyan <adobriyan@sw.ru>
      Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
      89c0d26b
    • Alexey Dobriyan's avatar
      macmace: use "unsigned long flags;" · 099575b6
      Alexey Dobriyan authored
      Code will do local_irq_save() on it.
      Signed-off-by: default avatarAlexey Dobriyan <adobriyan@sw.ru>
      Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
      099575b6
    • Peter Korsgaard's avatar
      Cleanup usbnet_probe() return value handling · 9514bfe5
      Peter Korsgaard authored
      usbnet_probe() handles a positive return value from the driver bind()
      function as success, but will later only setup the status handler if the
      return value was zero, leading to confusion. Patch adjusts this to accept
      positive values as success in both checks.
      Signed-off-by: default avatarPeter Korsgaard <jacmet@sunsite.dk>
      Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
      9514bfe5
    • Stephen Hemminger's avatar
      netxen: deinline and sparse fix · 4638aef1
      Stephen Hemminger authored
      Get rid of dubious casts to (void *) which causes a sparse warning.
      And move largeish function from inline to the one file that uses the code,
      the compiler can then decide to inline it.
      
      Compile tested only.
      Signed-off-by: default avatarStephen Hemminger <shemminger@linux-foundation.org>
      Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
      4638aef1
    • Francois Romieu's avatar
      eeprom_93cx6: shorten pulse timing to match spec (bis) · 8abd531e
      Francois Romieu authored
      Based on an original idea by John W. Linville.
      
      It is the missing part of 42d45ccd60636c28e35c2016f091783bc14ad99c
      Signed-off-by: default avatarFrancois Romieu <romieu@fr.zoreil.com>
      Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
      8abd531e
    • Olof Johansson's avatar
      phylib: Add Marvell 88E1112 phy id · 85cfb534
      Olof Johansson authored
      Add 88E1112 PHY ID to the marvell driver. Seems to do fine with the
      88E1111 inits.
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
      85cfb534
    • Olof Johansson's avatar
      phylib: cleanup marvell.c a bit · e5479239
      Olof Johansson authored
      Simplify the marvell driver init a bit: Make the supported devices an
      array instead of explicitly registering each structure. This makes it
      considerably easier to add new devices down the road.
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
      e5479239
    • Ben Dooks's avatar
      AX88796 network driver · 825a2ff1
      Ben Dooks authored
      Support for the Asix AX88796 network controller, an
      NE2000 compatible 10/100 ethernet device with internal
      PHY.
      
      The driver supports PHY settings via either ioctl() or
      the ethtool driver ops.
      Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
      Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
      825a2ff1
    • Robert P. J. Day's avatar
      [MIPS] PNX8550: Cleanup proc code. · 105b1bca
      Robert P. J. Day authored
      Here's a slightly cleaner way of creating the /proc structure for the
      pnx8850.  mostly, it creates a directory with default mode 555, since the
      one you're creating is mode 444, which is somewhat unusual for a directory
      under /proc.
      Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      105b1bca
    • Ralf Baechle's avatar
      [MIPS] WRPPMC: Fix build. · 569fb753
      Ralf Baechle authored
      Using another systems defines is a safe way to get your code broken by
      accident when that system is removed.
      Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      569fb753
    • Ralf Baechle's avatar
      [MIPS] Yosemite: Fix modpost warnings. · 44659f29
      Ralf Baechle authored
        MODPOST vmlinux
      WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x974): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done')
      WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x980): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done')
      WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x978): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done')
      WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x984): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done')
      WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x98c): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done')
      WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x990): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done')
      Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      44659f29