Bump patch to reflect what version of the out of tree driver it has
equivalent functionality with (2.11.3).
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch adds support for ethtool's get_coalesce and set_coalesce command for
the ixgbevf driver. This enables dynamically updating the minimum time between
interrupts.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch creates a new function to set PSRTYPE. This function helps lay
the ground work for eventual multi queue support.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch resolves an issue where the logic used to detect changes in rx-usecs
was incorrect and was masked by the call to ixgbe_update_rsc().

Setting rx-usecs between 0,2-9 and 1,10 and up requires a reset to allow
ixgbe_configure_tx_ring() to set the correct value for TXDCTL.WTHRESH in
order to avoid Tx hangs with BQL enabled.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

use pcie_capability_read_word() to simplify code.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This function previously had the same check as used by the
ixgbe_pcie_from_parent. As the hardcode is due to the device having an internal
switch, this function should simply use the call from ixgbe_pcie_from_parent.
This reduces code complexity and makes it less likely a developer will forget
to update the list in the future.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

commit fa44f2f1 broke reloading of igb, when
VFs are assigned to a guest, in several ways.
1. on module load adapter->vf_data does not get properly allocated,
resulting in a null pointer exception when accessing adapter->vf_data in
igb_reset() on module reload.
 modprobe -r igb ; modprobe igb max_vfs=7
[  215.215837] igb 0000:01:00.1: removed PHC on eth1
[  216.932072] igb 0000:01:00.1: IOV Disabled
[  216.937038] igb 0000:01:00.0: removed PHC on eth0
[  217.127032] igb 0000:01:00.0: Cannot deallocate SR-IOV virtual functions while they are assigned - VFs will not be deallocated
[  217.146178] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
[  217.154050] igb: Copyright (c) 2007-2013 Intel Corporation.
[  217.160688] igb 0000:01:00.0: Enabling SR-IOV VFs using the module parameter is deprecated - please use the pci sysfs interface.
[  217.173703] igb 0000:01:00.0: irq 103 for MSI/MSI-X
[  217.179227] igb 0000:01:00.0: irq 104 for MSI/MSI-X
[  217.184735] igb 0000:01:00.0: irq 105 for MSI/MSI-X
[  217.220082] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048
[  217.228846] IP: [<ffffffffa007c5e5>] igb_reset+0xc5/0x4b0 [igb]
[  217.235472] PGD 3607ec067 PUD 36170b067 PMD 0
[  217.240461] Oops: 0002 [#1] SMP
[  217.244085] Modules linked in: igb(+) igbvf mptsas mptscsih mptbase scsi_transport_sas [last unloaded: igb]
[  217.255040] CPU: 4 PID: 4833 Comm: modprobe Not tainted 3.11.0+ #46
[...]
[  217.390007]  [<ffffffffa007fab2>] igb_probe+0x892/0xfd0 [igb]
[  217.396422]  [<ffffffff81470b3e>] local_pci_probe+0x1e/0x40
[  217.402641]  [<ffffffff81472029>] pci_device_probe+0xf9/0x110
[...]
2. A follow up issue, pci_enable_sriov() should only be called if no VFs were
still allocated on module unload. Otherwise pci_enable_sriov() gets called
multiple times in a row rendering the NIC unusable until reset.
3. simply calling igb_enable_sriov() in igb_probe_vfs() is not enough as the
interrupts need to be re-setup. Switching that to igb_pci_enable_sriov().
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Tested-by: Sibai Li <Sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch calls code to set the master/slave mode for all m88 gen 2
PHY's. This patch also removes the call to this function for I210 devices
only from the function that is not called by I210 devices.
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Jeff Pieper  <jeffrey.e.pieper@gmail.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Remove including <linux/version.h> that don't need it.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Add the missing iounmap() before return from igbvf_probe()
in the error handling case.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Tested-by: Sibai Li <Sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

If new_mtu is very large then "new_mtu + ETH_HLEN + ETH_FCS_LEN" can
wrap and the check on the next line can underflow. This is one of those
bugs which can be triggered by the user if you have namespaces
configured.

Also since this is something the user can trigger then we don't want to
have dev_err() message.

This is a static checker fix and I'm not sure what the impact is.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Tested-by: Sibai Li Sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Antonio Quartulli says:

====================
this is another set of changes intended for net-next/linux-3.13.
(probably our last pull request for this cycle)

Patches 1 and 2 reshape two of our main data structures in a way that they can
easily be extended in the future to accommodate new routing protocols.

Patches from 3 to 9 improve our routing protocol API and its users so that all
the protocol-related code is not mixed up with the other components anymore.

Patch 10 limits the local Translation Table maximum size to a value such that it
can be fully transfered over the air if needed. This value depends on
fragmentation being enabled or not and on the mtu values.

Patch 11 makes batman-adv send a uevent in case of soft-interface destruction
while a "bat-Gateway" was configured (this informs userspace about the GW not
being available anymore).

Patches 13 and 14 enable the TT component to detect non-mesh client flag
changes at runtime (till now those flags where set upon client detection and
were not changed anymore).

Patch 16 is a generalisation of our user-to-kernel space communication (and
viceversa) used to exchange ICMP packets to send/received to/from the mesh
network. Now it can easily accommodate new ICMP packet types without breaking
the existing userspace API anymore.

Remaining patches are minor changes and cleanups.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Hannes Frederic Sowa says:

====================
initialize fragment hash secrets with net_get_random_once

This series switches the inet_frag.rnd hash initialization to
net_get_random_once.

Included patches:
 ipv4: initialize ip4_frags hash secret as late
 ipv6: split inet6_hash_frag for netfilter and
 inet: remove old fragmentation hash initializing
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

All fragmentation hash secrets now get initialized by their
corresponding hash function with net_get_random_once. Thus we can
eliminate the initial seeding.

Also provide a comment that hash secret seeding happens at the first
call to the corresponding hashing function.

Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Defer the fragmentation hash secret initialization for IPv6 like the
previous patch did for IPv4.

Because the netfilter logic reuses the hash secret we have to split it
first. Thus introduce a new nf_hash_frag function which takes care to
seed the hash secret.

Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Defer the generation of the first hash secret for the ipv4 fragmentation
cache as late as possible.

ip4_frags.rnd gets initial seeded by inet_frags_init and regulary
reseeded by inet_frag_secret_rebuild. Either we call ipqhashfn directly
from ip_fragment.c in which case we initialize the secret directly.

If we first get called by inet_frag_secret_rebuild we install a new secret
by a manual call to get_random_bytes. This secret will be overwritten
as soon as the first call to ipqhashfn happens. This is safe because we
won't race while publishing the new secrets with anyone else.

Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jingoo Han syas:

====================
ethernet: remove unnecessary pci_set_drvdata() part 4

Since commit 0998d063
(device-core: Ensure drvdata = NULL when no driver is bound),
the driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Declare 'enum RMCR_BIT' containing the single member for the RMCR.RNC bit and
replace bare numbers in the driver by  this mnemonic.
Suggested-by: David Miller <davem@davemloft.net>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Conflicts:
	drivers/net/usb/qmi_wwan.c
	include/net/dst.h

Trivial merge conflicts, both were overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently net_secret_init does not get inlined, so we always have a call
to net_secret_init even in the fast path.

Let's specify net_secret_init as __always_inline so we have the nop in
the fast-path without the call to net_secret_init and the unlikely path
at the epilogue of the function.

jump_labels handle the inlining correctly.
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

2e685cad (tcp_memcontrol: Kill struct tcp_memcontrol) falsly modified
the access to memory_pressure of sk->sk_prot->memory_pressure. The patch
did modify the memory_pressure-field of struct cg_proto, but not the one
of struct proto.

So, the access to sk_prot->memory_pressure should not be changed.
Acked-by: Eric Dumazet <edumazet@google.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of handling icmp packets only up to length of icmp_packet_rr,
the code should handle any icmp length size. Therefore the length
truncating is moved to when the packet is actually sent to userspace
(this does not support lengths longer than icmp_packet_rr yet). Longer
packets are forwarded without truncating.

This patch also cleans up some parts where the icmp header struct could
be used instead of other icmp_packet(_rr) structs to make the code more
readable.
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>

Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>

Flags covered by TT_SYNC_MASK are kept in sync among the
nodes in the network and therefore they have to be
considered while computing the global/local table CRC.

In this way a generic originator is able to understand if
its table contains the correct flags or not.

Bits from 4 to 7 in the TT flags fields are now reserved for
"synchronized" flags only.

This allows future developers to add more flags of this type
without breaking compatibility.

It's important to note that not all the remote TT flags are
synchronised. This comes from the fact that some flags are
used to inject an information once only.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>

Some flags (i.e. the WIFI flag) may change after that the
related client has already been announced. However it is
useful to informa the rest of the network about this change.

Add a runtime-flag-switch detection mechanism and
re-announce the related TT entry to advertise the new flag
value.

This mechanism can be easily exploited by future flags that
may need the same treatment.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>

Upcoming changes need to perform other checks on the
incoming net_device struct.

To avoid performing dev_get_by_index() for each and every
check, it is better to move it outside of is_wifi_iface()
and search the netdev object once only.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>

In case of soft_iface destruction send a GW DEL event to
userspace so that applications which are listening for GW
events are informed about the lost of connectivity and can
react accordingly.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>

The local translation table size is limited by what can be
transferred from one node to another via a full table request.

The number of entries fitting into a full table request depend
on whether the fragmentation is enabled or not. Therefore this
patch introduces a max table size check and refuses to add
more local clients when that size is reached. Moreover, if the
max full table packet size changes (MTU change or fragmentation
is disabled) the local table is downsized instantaneously.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Antonio Quartulli <ordex@autistici.org>

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

Some operations executed on an orig_node depends on the
current routing algorithm being used. To easily make this
mechanism routing algorithm agnostic add a orig_node
specific API that each algorithm can populate with its own
routines.

Such routines are then invoked by the code when needed,
without knowing which routing algorithm is currently in use

With this patch 3 API functions are added:
- orig_free (to free routing depending internal structs)
- orig_add_if (to change the inner state of an orig_node
  when a new hard interface is added)
- orig_del_if (to change the inner state of an orig_node
  when an hard interface is removed)
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

Each routing protocol has its own metric semantic and
therefore is the protocol itself the only component able to
compare two metrics to check their "similarity".

This new API allows each routing protocol to implement its
own logic and make the external code protocol agnostic.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>