- 04 Apr, 2013 29 commits
-
-
Sylwester Nawrocki authored
Make sure media_entity_pipeline_stop() is called on video device close in cases where there was VIDIOC_STREAMON ioctl and no VIDIOC_STREAMOFF. This patch fixes media entities stream_count state which could prevent links from being disconnected, due to non-zero stream_count. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sylwester Nawrocki authored
This patch fixes erroneous setup of the YUV order caused by not clearing FIMC_REG_MSCTRL_ORDER422_MASK bit field before setting proper FIMC_REG_MSCTRL_ORDER422 bits. This resulted in false colors for YUYV, YVYU, UYVY, VYUY color formats, depending in what sequence those were configured by user space. YUV order definitions are corrected so that following convention is used: | byte3 | byte2 | byte1 | byte0 -------+-------+-------+-------+------ YCBYCR | CR | Y | CB | Y YCRYCB | CB | Y | CR | Y CBYCRY | Y | CR | Y | CB CRYCBY | Y | CB | Y | CR Signed-off-by: -
Sylwester Nawrocki authored
The FIMC-LITE output DMA allows to configure different YUV order than the order at the camera input interface. Thus there is some limited colorspace conversion possible. This patch makes the color format variable be per FIMC-LITE input/output, rather than a global per device. This also fixes incorrect behavior where color format at the FIMC-LITE.N subdev's source pad is modified by VIDIOC_S_FMT ioctl on the related video node. YUV order definitions are corrected so that we use notation: | byte3 | byte2 | byte1 | byte0 -------+-------+-------+-------+------ YCBYCR | CR | Y | CB | Y YCRYCB | CB | Y | CR | Y CBYCRY | Y | CR | Y | CB CRYCBY | Y | CB | Y | CR Signed-off-by: -
Sylwester Nawrocki authored
There is no need to use separate variant data structure for each FIMC-LITE IP instance. According to my knowledge there are no differences across them on Exynos4 as well as Exynos5 SoCs. Drop flite_variant data structure and use struct flite_drvdata instead. Signed-off-by:
-
Sylwester Nawrocki authored
The Exynos platform will support only device tree based booting from v3.10. The FIMC variant data will be parsed directly from the device tree, hence the now unused static data can be removed. Signed-off-by:
-
Sylwester Nawrocki authored
Create disabled links from the FIMC-LITE subdevs to the FIMC-IS-ISP subdev and from FIMC-IS-ISP to all FIMC subdevs. Signed-off-by:
-
Sylwester Nawrocki authored
This patch adds support for registration of the FIMC-IS device represented by the FIMC-IS-ISP subdev to the top level media device driver. The FIMC-IS subsystem is available on Exynos4x12 SoCs which support only device tree based booting. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
This patch adds DT binding documentaton for the Imaging Subsystem (camera ISP) found on Samsung Exynos4x12 SoCs. Signed-off-by:
-
Sylwester Nawrocki authored
This patch adds a common image sensor driver and Makefile/Kconfig to enable compilation of the whole IS driver. The sensor subdev driver currently only handles an image sensor's power supplies and reset signal. There is no I2C communication as it is handled by the ISP's firmware. Signed-off-by:
-
Sylwester Nawrocki authored
This patch adds the ISP processing parameters interface files. Signed-off-by:
Younghwan Joo <yhwan.joo@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
This patch adds the ISP I2C bus controller driver files. Creating a standard I2C bus adapter, even if the driver doesn't actually communicate with the hardware and it is instead controlled by the ISP firmware running on the Cortex-A5, allows to use standard hardware description in the device tree. As the sensor would have actually had a standard V4L2 sub-device driver run on the host CPU. This approach allows to adapt the driver with a relatively small effort should the Imaging Subsystem architecture change so that the I2C bus is handled by the host's CPU OS, rather than the internal FIMC-IS ARM CPU firmware. The image sensor driver could be a standard I2C client driver, as in case of most existing image sensors. Signed-off-by:
-
Sylwester Nawrocki authored
This patch adds a set of core files of the Exynos4x12 FIMC-IS V4L2 driver. This includes main functionality like allocating memory, loading the firmware, FIMC-IS register interface and host CPU <-> IS command and error code definitions. The driver currently exposes a single subdev named FIMC-IS-ISP, which corresponds to the FIMC-IS ISP and DRC IP blocks. The FIMC-IS-ISP subdev currently supports only a subset of user controls. For other controls we need several extensions at the V4L2 API. The supported standard controls are: brightness, contrast, saturation, hue, sharpness, 3a_lock, exposure_time_absolute, white_balance_auto_preset, iso_sensitivity, iso_sensitivity_auto, exposure_metering_mode. Signed-off-by:
-
Sylwester Nawrocki authored
v4l2_of_parse_parallel_bus() function is now static and EXPORT_SYMBOL() doesn't apply to it any more. Drop this meaningless statement, which was supposed to be done in the original merged patch. While at it, edit the copyright notice so it is sorted in both the v4l2-of.c and v4l2-of.h file in newest entries on top order, and state clearly I'm just the author of parts of the code, not the copyright owner. Signed-off-by:
-
Sylwester Nawrocki authored
The 'camera' DT node needs to have sclk_cam0/1 and pxl_async0/1 clocks specified, while 'fimc' nodes should have only "fimc" and "sclk_fimc". "mux" and "parent" are leftovers from early versions of patches adding DT support, when the IP bus clock parent clock was being set by the driver. A better solution is needed to have e.g. clocks driver setting all required parent clocks, before clock consumers start using the clocks. Currently this binding doesn't describe parent clocks setup, it needs to be specified and handled somewhere else. Signed-off-by:
-
Sylwester Nawrocki authored
Currently the whole driver depends on MFD_SYSCON, which in turn depends on OF. To allow to use the driver on non-dt platforms (S5PV210) the SYSREG support is made conditional (it is needed only for dt enabled platforms) and MFD_SYSCON is selected if OF is enabled, instead of depending on OF. Signed-off-by:
-
Arnd Bergmann authored
In multiplatform configurations, we cannot include headers provided by only the exynos platform. Fortunately a number of drivers that include those headers do not actually need them, so we can just remove the inclusions. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Sachin Kamat authored
Fixes the following checkpatch warning: WARNING: please, no space before tabs Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Sachin Kamat authored
Fixes the following checkpatch warning: WARNING: please, no space before tabs Signed-off-by:
-
Sachin Kamat authored
struct dev_pm_ops should be const. Signed-off-by:
-
Sachin Kamat authored
Fixes the following checkpatch warning: WARNING: please, no space before tabs Signed-off-by:
-
Sachin Kamat authored
Silences the following checkpatch warning: WARNING: please, no space before tabs Signed-off-by:
-
Sachin Kamat authored
Fixes the following checkpatch warnings: WARNING: unnecessary whitespace before a quoted newline WARNING: please, no space before tabs Signed-off-by:
-
Sachin Kamat authored
Fixes the following checkpatch warnings: WARNING: unnecessary whitespace before a quoted newline WARNING: please, no space before tabs Signed-off-by:
-
Tushar Behera authored
Checking '< 0' for unsigned variables always returns false. For error codes, use IS_ERR_VALUE() instead. Signed-off-by:
Tushar Behera <tushar.behera@linaro.org> Signed-off-by:
-
Phil Edworthy authored
Based on work done by Katsuya Matsubara. Signed-off-by:
Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by:
-
Fabio Porcedda authored
The commit 39793c69 "[media] mx2_camera: Convert it to platform driver" used module_platform_driver() to make code smaller, but since the driver used platform_driver_probe is more appropriate to use module_platform_driver_probe(). Signed-off-by:
Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by:
-
Fabio Porcedda authored
This patch converts the drivers to use the module_platform_driver_probe() macro which makes the code smaller and a bit simpler. Signed-off-by:
-
Guennadi Liakhovetski authored
To protect against open() racing with rmmod, hold the list_lock also while obtaining a reference to the camera host driver and check that the video device hasn't been unregistered yet. Signed-off-by:
-
Mauro Carvalho Chehab authored
As reported by Dan Carpenter: FYI, there are new smatch warnings show up in tree: git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next master head: da17d7bda957ae4697b6abc0793f74fb9b50b58f commit: 4c3bdb5e [media] siano: better debug send/receive messages drivers/media/common/siano/smscoreapi.c:396 smscore_translate_msg() error: buffer overflow 'siano_msgs' 401 <= 401 While it is almost impossible for this error to happen in practice, as it would require the siano's firmware to return an special invalid answer to a message request, fixing it is trivial. So, let's do it. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
- 01 Apr, 2013 1 commit
-
-
Mauro Carvalho Chehab authored
Linux 3.9-rc5 * tag 'v3.9-rc5': (1080 commits) Linux 3.9-rc5 Revert "lockdep: check that no locks held at freeze time" dw_dmac: adjust slave_id accordingly to request line base dmaengine: dw_dma: fix endianess for DT xlate function PNP: List Rafael Wysocki as a maintainer rbd: don't zero-fill non-image object requests ia64 idle: delete stale (*idle)() function pointer Btrfs: don't drop path when printing out tree errors in scrub target: Fix RESERVATION_CONFLICT status regression for iscsi-target special case tcm_vhost: Avoid VIRTIO_RING_F_EVENT_IDX feature bit Revert "mm: introduce VM_POPULATE flag to better deal with racy userspace programs" usb: ftdi_sio: Add support for Mitsubishi FX-USB-AW/-BD mg_disk: fix error return code in mg_probe() Btrfs: fix wrong return value of btrfs_lookup_csum() Btrfs: fix wrong reservation of csums Btrfs: fix double free in the btrfs_qgroup_account_ref() Btrfs: limit the global reserve to 512mb Btrfs: hold the ordered operations mutex when waiting on ordered extents Btrfs: fix space accounting for unlink and rename Btrfs: fix space leak when we fail to reserve metadata space ...
-
- 31 Mar, 2013 10 commits
-
-
Linus Torvalds authored
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull slave-dmaengine fixes from Vinod Koul: "Two fixes for slave-dmaengine. The first one is for making slave_id value correct for dw_dmac and the other one fixes the endieness in DT parsing" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dw_dmac: adjust slave_id accordingly to request line base dmaengine: dw_dma: fix endianess for DT xlate function
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: "For a some fixes for Kernel 3.9: - subsystem build fix when VIDEO_DEV=y, VIDEO_V4L2=m and I2C=m - compilation fix for arm multiarch preventing IR_RX51 to be selected - regression fix at bttv crop logic - s5p-mfc/m5mols/exynos: a few fixes for cameras on exynos hardware" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] [REGRESSION] bt8xx: Fix too large height in cropcap [media] fix compilation with both V4L2 and I2C as 'm' [media] m5mols: Fix bug in stream on handler [media] s5p-fimc: Do not attempt to disable not enabled media pipeline [media] s5p-mfc: Fix encoder control 15 issue [media] s5p-mfc: Fix frame skip bug [media] s5p-fimc: send valid m2m ctx to fimc_m2m_job_finish [media] exynos-gsc: send valid m2m ctx to gsc_m2m_job_finish [media] fimc-lite: Fix the variable type to avoid possible crash [media] fimc-lite: Initialize 'step' field in fimc_lite_ctrl structure [media] ir: IR_RX51 only works on OMAP2
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Alright, this time from 10K up in the air. Collection of fixes that have been queued up since the merge window opened, hence postponed until later in the cycle. The pull request contains: - A bunch of fixes for the xen blk front/back driver. - A round of fixes for the new IBM RamSan driver, fixing various nasty issues. - Fixes for multiple drives from Wei Yongjun, bad handling of return values and wrong pointer math. - A fix for loop properly killing partitions when being detached." * tag 'for-linus-20130331' of git://git.kernel.dk/linux-block: (25 commits) mg_disk: fix error return code in mg_probe() rsxx: remove unused variable rsxx: enable error return of rsxx_eeh_save_issued_dmas() block: removes dynamic allocation on stack Block: blk-flush: Fixed indent code style cciss: fix invalid use of sizeof in cciss_find_cfgtables() loop: cleanup partitions when detaching loop device loop: fix error return code in loop_add() mtip32xx: fix error return code in mtip_pci_probe() xen-blkfront: remove frame list from blk_shadow xen-blkfront: pre-allocate pages for requests xen-blkback: don't store dev_bus_addr xen-blkfront: switch from llist to list xen-blkback: fix foreach_grant_safe to handle empty lists xen-blkfront: replace kmalloc and then memcpy with kmemdup xen-blkback: fix dispatch_rw_block_io() error path rsxx: fix missing unlock on error return in rsxx_eeh_remap_dmas() Adding in EEH support to the IBM FlashSystem 70/80 device driver block: IBM RamSan 70/80 error message bug fix. block: IBM RamSan 70/80 branding changes. ... -
Paul Walmsley authored
This reverts commit 6aa97070. Commit 6aa97070 ("lockdep: check that no locks held at freeze time") causes problems with NFS root filesystems. The failures were noticed on OMAP2 and 3 boards during kernel init: [ BUG: swapper/0/1 still has locks held! ] 3.9.0-rc3-00344-ga937536b #1 Not tainted ------------------------------------- 1 lock held by swapper/0/1: #0: (&type->s_umount_key#13/1){+.+.+.}, at: [<c011e84c>] sget+0x248/0x574 stack backtrace: rpc_wait_bit_killable __wait_on_bit out_of_line_wait_on_bit __rpc_execute rpc_run_task rpc_call_sync nfs_proc_get_root nfs_get_root nfs_fs_mount_common nfs_try_mount nfs_fs_mount mount_fs vfs_kern_mount do_mount sys_mount do_mount_root mount_root prepare_namespace kernel_init_freeable kernel_init Although the rootfs mounts, the system is unstable. Here's a transcript from a PM test: http://www.pwsan.com/omap/testlogs/test_v3.9-rc3/20130317194234/pm/37xxevm/37xxevm_log.txt Here's what the test log should look like: http://www.pwsan.com/omap/testlogs/test_v3.8/20130218214403/pm/37xxevm/37xxevm_log.txt Mailing list discussion is here: http://lkml.org/lkml/2013/3/4/221 Deal with this for v3.9 by reverting the problem commit, until folks can figure out the right long-term course of action. Signed-off-by:
Paul Walmsley <paul@pwsan.com> Cc: Mandeep Singh Baines <msb@chromium.org> Cc: Jeff Layton <jlayton@redhat.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: <maciej.rutecki@gmail.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ben Chan <benchan@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Hans Verkuil authored
radio-si476x depends on SND and SND_SOC, the mfd driver should select REGMAP_I2C. Also fix a small compile warning in a debug message: drivers/mfd/si476x-i2c.c: In function ‘si476x_core_drain_rds_fifo’: drivers/mfd/si476x-i2c.c:391:4: warning: field width specifier ‘*’ expects argument of type ‘int’, but argument 4 has type ‘long unsigned int’ [-Wformat] Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Jean Delvare authored
drivers/media/usb/dvb-usb/m920x.c:91:6: warning: "ret" may be used uninitialized in this function [-Wuninitialized] drivers/media/usb/dvb-usb/m920x.c:70:6: note: "ret" was declared here This is real, if a remote control has an empty initialization sequence we would get success or failure randomly. OTOH the initialization of ret in m920x_init is needless, the function returns with an error as soon as an error happens, so the last return can only be a success and we can hard-code 0 there. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Hans Verkuil authored
em28xx: fix typo in scale_to_size(). The second hscale should be vscale. This bug caused xawtv to fail because it cannot find a workable image size. Signed-off-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
-
Sylwester Nawrocki authored
The s5p-fimc directory now contains drivers for multiple IP blocks found in multiple Samsung application processors. This includes FIMC (CAMIF), MIPI CSIS and FIMC LITE. FIMC-IS (Imaging Subsystem) driver is going to be put into same directory. Hence we rename it to exynos4-is as s5p-fimc was only relevant for early version of this driver, when it only supported FIMC IP block. The imaging subsystem drivers for Exynos4 SoC series and S5PV210 will be included in drivers/media/platform/exynos4-is directory, with some modules shared with exynos5 series, while the rest of exynos5 specific modules will find their home in drivers/media/platform/exynos5-is. Signed-off-by:
-
Sylwester Nawrocki authored
Drop fimc-lite.h header inclusion to make the exynos-fimc-lite module independent on other modules. Move struct fimc_fmt declaration to the driver's private headers as it is used in multiple modules. Reported-by:
Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by:
-
