- 17 Dec, 2012 24 commits
-
-
Zheng Liu authored
commit 12f8f74b upstream. Recently I build perf and get a build error on builtin-test.c. The error is as following: $ make CC perf.o CC builtin-test.o cc1: warnings being treated as errors builtin-test.c: In function ‘sched__get_first_possible_cpu’: builtin-test.c:977: warning: implicit declaration of function ‘CPU_ALLOC’ builtin-test.c:977: warning: nested extern declaration of ‘CPU_ALLOC’ builtin-test.c:977: warning: assignment makes pointer from integer without a cast builtin-test.c:978: warning: implicit declaration of function ‘CPU_ALLOC_SIZE’ builtin-test.c:978: warning: nested extern declaration of ‘CPU_ALLOC_SIZE’ builtin-test.c:979: warning: implicit declaration of function ‘CPU_ZERO_S’ builtin-test.c:979: warning: nested extern declaration of ‘CPU_ZERO_S’ builtin-test.c:982: warning: implicit declaration of function ‘CPU_FREE’ builtin-test.c:982: warning: nested extern declaration of ‘CPU_FREE’ builtin-test.c:992: warning: implicit declaration of function ‘CPU_ISSET_S’ builtin-test.c:992: warning: nested extern declaration of ‘CPU_ISSET_S’ builtin-test.c:998: warning: implicit declaration of function ‘CPU_CLR_S’ builtin-test.c:998: warning: nested extern declaration of ‘CPU_CLR_S’ make: *** [builtin-test.o] Error 1 This problem is introduced in 3e7c439a. CPU_ALLOC and related macros are missing in sched__get_first_possible_cpu function. In 54489c18, commiter mentioned that CPU_ALLOC has been removed. So CPU_ALLOC calls in this function are removed to let perf to be built. Signed-off-by:
Vinson Lee <vlee@twitter.com> Signed-off-by:
Zheng Liu <wenqing.lz@taobao.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Vinson Lee <vlee@twitter.com> Cc: Zheng Liu <wenqing.lz@taobao.com> Link: http://lkml.kernel.org/r/1352422726-31114-1-git-send-email-vlee@twitter.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Williams authored
commit ba2d8ce9 upstream. Some devices (ex Nokia C7) simply don't respond at all when data is sent to some of their USB interfaces. The data gets stuck in the TTYs queue and sits there until close(2), which them blocks because closing_wait defaults to 30 seconds (even though the fd is O_NONBLOCK). This is rarely desired. Implement the standard mechanism to adjust closing_wait and let applications handle it how they want to. See also 02303f73 for usb_wwan.c. Signed-off-by:
Dan Williams <dcbw@redhat.com> Acked-by:
Oliver Neukum <oneukum@suse.de> Tested-by:
Aleksander Morgado <aleksander@gnu.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steven Rostedt authored
commit 9366c1ba upstream. The function rb_check_pages() was added to make sure the ring buffer's pages were sane. This check is done when the ring buffer size is modified as well as when the iterator is released (closing the "trace" file), as that was considered a non fast path and a good place to do a sanity check. The problem is that the check does not have any locks around it. If one process were to read the trace file, and another were to read the raw binary file, the check could happen while the reader is reading the file. The issues with this is that the check requires to clear the HEAD page before doing the full check and it restores it afterward. But readers require the HEAD page to exist before it can read the buffer, otherwise it gives a nasty warning and disables the buffer. By adding the reader lock around the check, this keeps the race from happening. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steven Rostedt authored
commit 54f7be5b upstream. The function rb_set_head_page() searches the list of ring buffer pages for a the page that has the HEAD page flag set. If it does not find it, it will do a WARN_ON(), disable the ring buffer and return NULL, as this should never happen. But if this bug happens to happen, not all callers of this function can handle a NULL pointer being returned from it. That needs to be fixed. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
commit 70f77b3f upstream. There is a typo here where '&' is used instead of '|' and it turns the statement into a noop. The original code is equivalent to: iter->flags &= ~((1 << 2) & (1 << 4)); Link: http://lkml.kernel.org/r/20120609161027.GD6488@elgon.mountainSigned-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sarah Sharp authored
commit bba18e33 upstream. Ali reports that plugging a device into the Fresco Logic xHCI host with PCI device ID 1400 produces an IRQ error: do_IRQ: 3.176 No irq handler for vector (irq -1) Other early Fresco Logic host revisions don't support MSI, even though their PCI config space claims they do. Extend the quirk to disabling MSI to this chipset revision. Also enable the short transfer quirk, since it's likely this revision also has that quirk, and it should be harmless to enable. 04:00.0 0c03: 1b73:1400 (rev 01) (prog-if 30 [XHCI]) Subsystem: 1d5c:1000 Physical Slot: 3 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 51 Region 0: Memory at d4600000 (32-bit, non-prefetchable) [size=64K] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000feeff00c Data: 41b1 Capabilities: [80] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <2us, L1 <32us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 unlimited ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Kernel driver in use: xhci_hcd This patch should be backported to stable kernels as old as 2.6.36, that contain the commit f5182b41 "xhci: Disable MSI for some Fresco Logic hosts." Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by:
A Sh <smr.ash1991@gmail.com> Tested-by:
A Sh <smr.ash1991@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Stern authored
commit 50ce5c06 upstream. This patch (as1636) is a partial workaround for a hardware bug affecting OHCI controllers by NVIDIA at least, maybe others too. When the controller retires a Transfer Descriptor, it is supposed to add the TD onto the Done Queue. But sometimes this doesn't happen, with the result that ohci-hcd never realizes the corresponding transfer has finished. Symptoms can vary; a typical result is that USB audio stops working after a while. The patch works around the problem by recognizing that TDs are always processed in order. Therefore, if a later TD is found on the Done Queue than all the earlier TDs for the same endpoint must be finished as well. Unfortunately this won't solve the problem in cases where the missing TD is the last one in the endpoint's queue. A complete fix would require a signficant amount of change to the driver. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Tested-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lan Tianyu authored
commit d0c2ce16 upstream. The ACPI video driver can't control backlight correctly on Asus UL30VT. Vendor driver (asus-laptop) can work. This patch is to add "Asus UL30VT" to ACPI video detect blacklist in order to use asus-laptop for video control on the "Asus UL30VT" rather than ACPI video driver. References: https://bugzilla.kernel.org/show_bug.cgi?id=32592Reported-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
Lan Tianyu <tianyu.lan@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zhang Rui authored
commit 129ff8f8 upstream. Or else the laptop will boot with a dimmed screen. References: https://bugzilla.kernel.org/show_bug.cgi?id=51141Tested-by:
Stefan Nagy <public@stefan-nagy.at> Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rafael J. Wysocki authored
commit a6b5e88c upstream. During resume from system suspend the 'data' field of struct pnp_dev in pnpacpi_set_resources() may be a stale pointer, due to removal of the associated ACPI device node object in the previous suspend-resume cycle. This happens, for example, if a dockable machine is booted in the docking station and then suspended and resumed and suspended again. If that happens, pnpacpi_build_resource_template() called from pnpacpi_set_resources() attempts to use that pointer and crashes. However, pnpacpi_set_resources() actually checks the device's ACPI handle, attempts to find the ACPI device node object attached to it and returns an error code if that fails, so in fact it knows what the correct value of dev->data should be. Use this observation to update dev->data with the correct value if necessary and dump a call trace if that's the case (once). We still need to fix the root cause of this issue, but preventing systems from crashing because of it is an improvement too. Reported-and-tested-by:
Zdenek Kabelac <zdenek.kabelac@gmail.com> References: https://bugzilla.kernel.org/show_bug.cgi?id=51071Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lan Tianyu authored
commit 876ab790 upstream. Sony Vaio VPCEB1S1E does not resume correctly without acpi_sleep=nonvs, so add it to the ACPI sleep blacklist. References: https://bugzilla.kernel.org/show_bug.cgi?id=48781Reported-by:
Sébastien Wilmet <swilmet@gnome.org> Signed-off-by:
Lan Tianyu <tianyu.lan@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kamil Iskra authored
commit 4000e626 upstream. Add a quirk to correctly report battery capacity on 2010 and 2011 Lenovo Thinkpad models. The affected models that I tested (x201, t410, t410s, and x220) exhibit a problem where, when battery capacity reporting unit is mAh, the values being reported are wrong. Pre-2010 and 2012 models appear to always report in mWh and are thus unaffected. Also, in mid-2012 Lenovo issued a BIOS update for the 2011 models that fixes the issue (tested on x220 with a post-1.29 BIOS). No such update is available for the 2010 models, so those still need this patch. Problem description: for some reason, the affected Thinkpads switch the reporting unit between mAh and mWh; generally, mAh is used when a laptop is plugged in and mWh when it's unplugged, although a suspend/resume or rmmod/modprobe is needed for the switch to take effect. The values reported in mAh are *always* wrong. This does not appear to be a kernel regression; I believe that the values were never reported correctly. I tested back to kernel 2.6.34, with multiple machines and BIOS versions. Simply plugging a laptop into mains before turning it on is enough to reproduce the problem. Here's a sample /proc/acpi/battery/BAT0/info from Thinkpad x220 (before a BIOS update) with a 4-cell battery: present: yes design capacity: 2886 mAh last full capacity: 2909 mAh battery technology: rechargeable design voltage: 14800 mV design capacity warning: 145 mAh design capacity low: 13 mAh cycle count: 0 capacity granularity 1: 1 mAh capacity granularity 2: 1 mAh model number: 42T4899 serial number: 21064 battery type: LION OEM info: SANYO Once the laptop switches the unit to mWh (unplug from mains, suspend, resume), the output changes to: present: yes design capacity: 28860 mWh last full capacity: 29090 mWh battery technology: rechargeable design voltage: 14800 mV design capacity warning: 1454 mWh design capacity low: 200 mWh cycle count: 0 capacity granularity 1: 1 mWh capacity granularity 2: 1 mWh model number: 42T4899 serial number: 21064 battery type: LION OEM info: SANYO Can you see how the values for "design capacity", etc., differ by a factor of 10 instead of 14.8 (the design voltage of this battery)? On the battery itself it says: 14.8V, 1.95Ah, 29Wh, so clearly the values reported in mWh are correct and the ones in mAh are not. My guess is that this problem has been around ever since those machines were released, but because the most common Thinkpad batteries are rated at 10.8V, the error (8%) is small enough that it simply hasn't been noticed or at least nobody could be bothered to look into it. My patch works around the problem by adjusting the incorrectly reported mAh values by "10000 / design_voltage". The patch also has code to figure out if it should be activated or not. It only activates on Lenovo Thinkpads, only when the unit is mAh, and, as an extra precaution, only when the battery capacity reported through ACPI does not match what is reported through DMI (I've never encountered a machine where the first two conditions would be true but the last would not, but better safe than sorry). I've been using this patch for close to a year on several systems without any problems. References: https://bugzilla.kernel.org/show_bug.cgi?id=41062Acked-by:
Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
commit fb37ef98 upstream. As reported https://bugzilla.kernel.org/show_bug.cgi?id=51031, the UAS driver causes problems and has been asked to be not built into any of the major distributions. To prevent users from running into problems with it, and for distros that were not notified, just mark the whole thing as broken. Acked-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Markus Becker authored
commit 356fe44f upstream. Signed-off-by:
Markus Becker <mab@comnets.uni-bremen.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Korsgaard authored
commit 1a88d5ee upstream. BeagleBone A5+ devices ended up getting shipped with the 'BeagleBone/XDS100V2' product string, and not XDS100 like it was agreed, so adjust the quirk to match. For details, see the thread on the beagle list: https://groups.google.com/forum/#!msg/beagleboard/zrFPew9_Wvo/ibWr1-eE8JwJSigned-off-by:
Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Martin Teichmann authored
commit d7e14b37 upstream. The Newport AGILIS model AG-UC8 compact piezo motor controller (http://search.newport.com/?q=*&x2=sku&q2=AG-UC8) is yet another device using an FTDI USB-to-serial chip. It works fine with the ftdi_sio driver when adding options ftdi-sio product=0x3000 vendor=0x104d to modprobe.d. udevadm reports "Newport" as the manufacturer, and "Agilis" as the product name. Signed-off-by:
Martin Teichmann <lkb.teichmann@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bjørn Mork authored
commit f36446cf upstream. The Huawei E173 will normally appear as 12d1:1436 in Linux. But the modem has another mode with different device ID and a slightly different set of descriptors. This is the mode used by Windows like this: 3Modem: USB\VID_12D1&PID_140C&MI_00\6&3A1D2012&0&0000 Networkcard: USB\VID_12D1&PID_140C&MI_01\6&3A1D2012&0&0001 Appli.Inter: USB\VID_12D1&PID_140C&MI_02\6&3A1D2012&0&0002 PC UI Inter: USB\VID_12D1&PID_140C&MI_03\6&3A1D2012&0&0003 All interfaces have the same ff/ff/ff class codes in this mode. Blacklisting the network interface to allow it to be picked up by the network driver. Reported-by:
Thomas Schäfer <tschaefer@t-online.de> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
li.rui27@zte.com.cn authored
commit 31b6a104 upstream. Signed-off-by:
Rui li <li.rui27@zte.com.cn> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jan Beulich authored
commit 6acf5a8c upstream. HPET_TN_FSB is not a proper mask bit; it merely toggles between MSI and legacy interrupt delivery. The proper mask bit is HPET_TN_ENABLE, so use both bits when (un)masking the interrupt. Signed-off-by:
Jan Beulich <jbeulich@suse.com> Link: http://lkml.kernel.org/r/5093E09002000078000A60E6@nat28.tlf.novell.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rene Buergel authored
commit 9db72fe6 upstream. This fixes an error during modpost, when ezusb is built into the kernel while USB is built as module. Signed-off-by:
René Bürgel <rene.buergel@sohard.de> Cc: Jeff Mahoney <jeffm@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
[Not needed in 3.8 or newer as this driver is removed there. - gregkh] We get this from user space and nothing has been done to ensure that these strings are NUL terminated. Reported-by:
Chen Gang <gang.chen@asianux.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Boris Ostrovsky authored
commit 22e32f4f upstream. Add family 16h PCI ID to AMD's power driver to allow it report power consumption on these processors. Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@amd.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Linus Walleij authored
commit 2630b17b upstream. This fixes a bit error in the U8500 clock implementation: the unused p2_pclk12 registered at bit 12 in periphereral group 6 was defined as using bit 11 rather than bit 12. When walking over and disabling the unused clocks in the tree at late init time, p2_pclk12 was disabled, by effectively clearing the but for p2_pclk11 instead of bit 12 as it should have, thus disabling gpio block 6 and 7. Reported-by:
Lee Jones <lee.jones@linaro.org> Acked-by:
Ulf Hansson <ulf.hansson@linaro.org> Cc: Philippe Begnic <philippe.begnic@st.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Mike Turquette <mturquette@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marek Szyprowski authored
commit 387870f2 upstream. dmapool always calls dma_alloc_coherent() with GFP_ATOMIC flag, regardless the flags provided by the caller. This causes excessive pruning of emergency memory pools without any good reason. Additionaly, on ARM architecture any driver which is using dmapools will sooner or later trigger the following error: "ERROR: 256 KiB atomic DMA coherent pool is too small! Please increase it with coherent_pool= kernel parameter!". Increasing the coherent pool size usually doesn't help much and only delays such error, because all GFP_ATOMIC DMA allocations are always served from the special, very limited memory pool. This patch changes the dmapool code to correctly use gfp flags provided by the dmapool caller. Reported-by:
Soeren Moch <smoch@web.de> Reported-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
Andrew Lunn <andrew@lunn.ch> Tested-by:
Soeren Moch <smoch@web.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 11 Dec, 2012 3 commits
-
-
Linus Torvalds authored
-
Florian Fainelli authored
The matrix-keymap module is currently lacking a proper module license, add one so we don't have this module tainting the entire kernel. This issue has been present since commit 1932811f ("Input: matrix-keymap - uninline and prepare for device tree support") Signed-off-by:
Florian Fainelli <florian@openwrt.org> CC: stable@vger.kernel.org # v3.5+ Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Netlink socket dumping had several missing verifications and checks. In particular, address comparisons in the request byte code interpreter could access past the end of the address in the inet_request_sock. Also, address family and address prefix lengths were not validated properly at all. This means arbitrary applications can read past the end of certain kernel data structures. Fixes from Neal Cardwell. 2) ip_check_defrag() operates in contexts where we're in the process of, or about to, input the packet into the real protocols (specifically macvlan and AF_PACKET snooping). Unfortunately, it does a pskb_may_pull() which can modify the backing packet data which is not legal if the SKB is shared. It very much can be shared in this context. Deal with the possibility that the SKB is segmented by using skb_copy_bits(). Fix from Johannes Berg based upon a report by Eric Leblond. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: ipv4: ip_check_defrag must not modify skb before unsharing inet_diag: validate port comparison byte code to prevent unsafe reads inet_diag: avoid unsafe and nonsensical prefix matches in inet_diag_bc_run() inet_diag: validate byte code to prevent oops in inet_diag_bc_run() inet_diag: fix oops for IPv4 AF_INET6 TCP SYN-RECV state
-
- 10 Dec, 2012 4 commits
-
-
Linus Torvalds authored
This reverts commits a5091539 and d7c3b937. This is a revert of a revert of a revert. In addition, it reverts the even older i915 change to stop using the __GFP_NO_KSWAPD flag due to the original commits in linux-next. It turns out that the original patch really was bogus, and that the original revert was the correct thing to do after all. We thought we had fixed the problem, and then reverted the revert, but the problem really is fundamental: waking up kswapd simply isn't the right thing to do, and direct reclaim sometimes simply _is_ the right thing to do. When certain allocations fail, we simply should try some direct reclaim, and if that fails, fail the allocation. That's the right thing to do for THP allocations, which can easily fail, and the GPU allocations want to do that too. So starting kswapd is sometimes simply wrong, and removing the flag that said "don't start kswapd" was a mistake. Let's hope we never revisit this mistake again - and certainly not this many times ;) Acked-by:
Mel Gorman <mgorman@suse.de> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Johannes Berg authored
ip_check_defrag() might be called from af_packet within the RX path where shared SKBs are used, so it must not modify the input SKB before it has unshared it for defragmentation. Use skb_copy_bits() to get the IP header and only pull in everything later. The same is true for the other caller in macvlan as it is called from dev->rx_handler which can also get a shared SKB. Reported-by:
Eric Leblond <eric@regit.org> Cc: stable@vger.kernel.org Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
This reverts commit 782fd304. We are going to reinstate the __GFP_NO_KSWAPD flag that has been removed, the removal reverted, and then removed again. Making this commit a pointless fixup for a problem that was caused by the removal of __GFP_NO_KSWAPD flag. The thing is, we really don't want to wake up kswapd for THP allocations (because they fail quite commonly under any kind of memory pressure, including when there is tons of memory free), and these patches were just trying to fix up the underlying bug: the original removal of __GFP_NO_KSWAPD in commit c6543459 ("mm: remove __GFP_NO_KSWAPD") was simply bogus. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Neal Cardwell authored
Add logic to verify that a port comparison byte code operation actually has the second inet_diag_bc_op from which we read the port for such operations. Previously the code blindly referenced op[1] without first checking whether a second inet_diag_bc_op struct could fit there. So a malicious user could make the kernel read 4 bytes beyond the end of the bytecode array by claiming to have a whole port comparison byte code (2 inet_diag_bc_op structs) when in fact the bytecode was not long enough to hold both. Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 09 Dec, 2012 3 commits
-
-
Neal Cardwell authored
Add logic to check the address family of the user-supplied conditional and the address family of the connection entry. We now do not do prefix matching of addresses from different address families (AF_INET vs AF_INET6), except for the previously existing support for having an IPv4 prefix match an IPv4-mapped IPv6 address (which this commit maintains as-is). This change is needed for two reasons: (1) The addresses are different lengths, so comparing a 128-bit IPv6 prefix match condition to a 32-bit IPv4 connection address can cause us to unwittingly walk off the end of the IPv4 address and read garbage or oops. (2) The IPv4 and IPv6 address spaces are semantically distinct, so a simple bit-wise comparison of the prefixes is not meaningful, and would lead to bogus results (except for the IPv4-mapped IPv6 case, which this commit maintains). Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Neal Cardwell authored
Add logic to validate INET_DIAG_BC_S_COND and INET_DIAG_BC_D_COND operations. Previously we did not validate the inet_diag_hostcond, address family, address length, and prefix length. So a malicious user could make the kernel read beyond the end of the bytecode array by claiming to have a whole inet_diag_hostcond when the bytecode was not long enough to contain a whole inet_diag_hostcond of the given address family. Or they could make the kernel read up to about 27 bytes beyond the end of a connection address by passing a prefix length that exceeded the length of addresses of the given family. Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Neal Cardwell authored
Fix inet_diag to be aware of the fact that AF_INET6 TCP connections instantiated for IPv4 traffic and in the SYN-RECV state were actually created with inet_reqsk_alloc(), instead of inet6_reqsk_alloc(). This means that for such connections inet6_rsk(req) returns a pointer to a random spot in memory up to roughly 64KB beyond the end of the request_sock. With this bug, for a server using AF_INET6 TCP sockets and serving IPv4 traffic, an inet_diag user like `ss state SYN-RECV` would lead to inet_diag_fill_req() causing an oops or the export to user space of 16 bytes of kernel memory as a garbage IPv6 address, depending on where the garbage inet6_rsk(req) pointed. Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 08 Dec, 2012 3 commits
-
-
Johannes Weiner authored
commit c702418f ("mm: vmscan: do not keep kswapd looping forever due to individual uncompactable zones") removed zone watermark checks from the compaction code in kswapd but left in the zone congestion clearing, which now happens unconditionally on higher order reclaim. This messes up the reclaim throttling logic for zones with dirty/writeback pages, where zones should only lose their congestion status when their watermarks have been restored. Remove the clearing from the zone compaction section entirely. The preliminary zone check and the reclaim loop in kswapd will clear it if the zone is considered balanced. Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Reviewed-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
The direct-IO write path already had the i_size checks in mm/filemap.c, but it turns out the read path did not, and removing the block size checks in fs/block_dev.c (commit bbec0270: "blkdev_max_block: make private to fs/buffer.c") removed the magic "shrink IO to past the end of the device" code there. Fix it by truncating the IO to the size of the block device, like the write path already does. NOTE! I suspect the write path would be *much* better off doing it this way in fs/block_dev.c, rather than hidden deep in mm/filemap.c. The mm/filemap.c code is extremely hard to follow, and has various conditionals on the target being a block device (ie the flag passed in to 'generic_write_checks()', along with a conditional update of the inode timestamp etc). It is also quite possible that we should treat this whole block device size as a "s_maxbytes" issue, and try to make the logic even more generic. However, in the meantime this is the fairly minimal targeted fix. Noted by Milan Broz thanks to a regression test for the cryptsetup reencrypt tool. Reported-and-tested-by:
Milan Broz <mbroz@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Two stragglers: 1) The new code that adds new flushing semantics to GRO can cause SKB pointer list corruption, manage the lists differently to avoid the OOPS. Fix from Eric Dumazet. 2) When TCP fast open does a retransmit of data in a SYN-ACK or similar, we update retransmit state that we shouldn't triggering a WARN_ON later. Fix from Yuchung Cheng." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: gro: fix possible panic in skb_gro_receive() tcp: bug fix Fast Open client retransmission
-
- 07 Dec, 2012 3 commits
-
-
Eric Dumazet authored
commit 2e71a6f8 (net: gro: selective flush of packets) added a bug for skbs using frag_list. This part of the GRO stack is rarely used, as it needs skb not using a page fragment for their skb->head. Most drivers do use a page fragment, but some of them use GFP_KERNEL allocations for the initial fill of their RX ring buffer. napi_gro_flush() overwrite skb->prev that was used for these skb to point to the last skb in frag_list. Fix this using a separate field in struct napi_gro_cb to point to the last fragment. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yuchung Cheng authored
If SYN-ACK partially acks SYN-data, the client retransmits the remaining data by tcp_retransmit_skb(). This increments lost recovery state variables like tp->retrans_out in Open state. If loss recovery happens before the retransmission is acked, it triggers the WARN_ON check in tcp_fastretrans_alert(). For example: the client sends SYN-data, gets SYN-ACK acking only ISN, retransmits data, sends another 4 data packets and get 3 dupacks. Since the retransmission is not caused by network drop it should not update the recovery state variables. Further the server may return a smaller MSS than the cached MSS used for SYN-data, so the retranmission needs a loop. Otherwise some data will not be retransmitted until timeout or other loss recovery events. Signed-off-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmcLinus Torvalds authored
Pull MMC fixes from Chris Ball: "Two small regression fixes: - sdhci-s3c: Fix runtime PM regression against 3.7-rc1 - sh-mmcif: Fix oops against 3.6" * tag 'mmc-fixes-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: sh-mmcif: avoid oops on spurious interrupts (second try) Revert misapplied "mmc: sh-mmcif: avoid oops on spurious interrupts" mmc: sdhci-s3c: fix missing clock for gpio card-detect
-