- 08 May, 2017 6 commits
-
-
Markus Elfring authored
A bit of data was put into a sequence by two separate function calls. Print the same data by a single function call instead. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Reviewed-by:
Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by:
Sumit Semwal <sumit.semwal@linaro.org>
-
Maarten Lankhorst authored
Some connectors may not allow all scaling mode properties, this function will allow creating the scaling mode property with only the supported subset. It also wires up this state for atomic. This will make it possible to convert i915 connectors to atomic. Changes since v1: - Add DRM_MODE_PROP_ENUM flag to drm_property_create - Use the correct index in drm_property_add_enum. - Add DocBook for function (Sean Paul). - Warn if less than 2 valid scaling modes are passed. - Remove level of indent. (Sean Paul) Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170501133804.8116-3-maarten.lankhorst@linux.intel.com [mlankhorst: Rename function, fix docbook issues] Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Maarten Lankhorst authored
This is only used in i915, which had used its own non-atomic way to deal with the picture aspect ratio. Move selected aspect_ratio to atomic state and use the atomic state in the affected i915 connectors. Signed-off-by:
-
Laura Abbott authored
Enable the GEM dma-buf import interfaces in addition to the export interfaces. This lets vgem be used as a test source for other allocators (e.g. Ion). Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
-
Laura Abbott authored
The existing drm_gem_prime_import function uses the underlying struct device of a drm_device for attaching to a dma_buf. Some drivers (notably vgem) may not have an underlying device structure. Offer an alternate function to attach using any available device structure. Signed-off-by:
-
Laura Abbott authored
The vgem driver is currently registered independent of any actual device. Some usage of the dmabuf APIs require an actual device structure to do anything. Register a dummy platform device for use with dmabuf. Reviewed-by:
-
- 04 May, 2017 10 commits
-
-
Pandiyan, Dhinakaran authored
Use the added helpers to track MST link bandwidth for atomic modesets. Link bw is acquired in the ->atomic_check() phase when CRTCs are being enabled with drm_atomic_find_vcpi_slots(). Similarly, link bw is released during ->atomic_check() with the connector helper callback ->atomic_check() when CRTCs are disabled. v6: active_changed does not alter vcpi allocations (Maarten) v5: Implement connector->atomic_check() in place of atomic_release() v4: Return an int from intel_dp_mst_atomic_release() (Maarten) v3: Handled the case where ->atomic_release() is called more than once during an atomic_check() for the same state. v2: Squashed atomic_release() implementation and caller (Daniel) Fixed logic for connector-crtc switching case (Daniel) Fixed logic for suspend-resume case. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Harry Wentland <Harry.wentland@amd.com> Acked-by:
Harry Wentland <harry.wentland@amd.com> Reviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
-
Pandiyan, Dhinakaran authored
drm_dp_atomic_find_vcpi_slots() should be called from ->atomic_check() to check there are sufficient vcpi slots for a mode and to add that to the state. This should be followed by a call to drm_dp_mst_allocate_vcpi() in ->atomic_commit() to initialize a struct vcpi for the port. drm_dp_atomic_release_vcpi_slots() should be called from ->atomic_check() to release a port's vcpi slot allocation from the state. Drivers that do not make use of this atomic helper are expected to call drm_dp_find_vcpi_slots() instead before calling drm_dp_mst_allocate_vcpi(). v3: drm_dp_atomic_release_vcpi_slots() now needs to know how many slots to release as we may not have a valid reference to port. v2: Added checks for verifying the port reference is valid Moved get_mst_topology_state() into the helpers (Daniel) Changed find_vcpi_slots() to not depend on current allocation Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Harry Wentland <Harry.wentland@amd.com> Reviewed-by: -
Pandiyan, Dhinakaran authored
Link bandwidth is shared between multiple display streams in DP MST configurations. The DP MST topology manager structure maintains the shared link bandwidth for a primary link directly connected to the GPU. For atomic modesetting drivers, checking if there is sufficient link bandwidth for a mode needs to be done during the atomic_check phase to avoid failed modesets. Let's encapsulate the available link bw information in a private state structure so that bw can be allocated and released atomically for each of the ports sharing the primary link. v3: WARN_ON() if connection_mutex is not held (Archit) v2: Included kernel doc, moved state initialization and switched to kmemdup() for allocation (Daniel) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Harry Wentland <Harry.wentland@amd.com> Reviewed-by:
-
Pandiyan, Dhinakaran authored
It is necessary to track states for objects other than connector, crtc and plane for atomic modesets. But adding objects like DP MST link bandwidth to drm_atomic_state would mean that a non-core object will be modified by the core helper functions for swapping and clearing it's state. So, lets add void * objects and helper functions that operate on void * types to keep these objects and states private to the core. Drivers can then implement specific functions to swap and clear states. The other advantage having just void * for these objects in drm_atomic_state is that objects of different types can be managed in the same state array. v7: Use __for_each_private_obj to define for_each_private_obj (Maarten) v6: More kernel-doc to keep 0-day happy v5: Remove more NULL checks (Maarten) v4: Avoid redundant NULL checks when private_objs array is empty (Maarten) v3: Macro alignment (Chris) v2: Added docs and new iterator to filter private objects (Daniel) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Harry Wentland <Harry.wentland@amd.com> Acked-by:
-
git://people.freedesktop.org/~airlied/linuxSean Paul authored
Backmerging Dave's 'drm-for-v4.12' pull request now that it's landed. There are a bunch of non-drm changes which are just random bits we hadn't yet picked up in misc-next. main drm pull request for 4.12 kernel Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/CAPM=9ty0jHgzG18zOr5CYODyTqZfH55kOCOFqNnXiWnTb_uNWw@mail.gmail.com
-
Chris Wilson authored
Scatter a few cond_resched() in between phases of the drm_mm selftests to try and prevent us incurring the wrath of the NMI watchdog. Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
-
Shawn Guo authored
It adds VGA driver support, which needs to configure corresponding VOU interface in RGB_888 format, and thus the following changes are needed on zx_vou. - Rename the CSC block of Graphic Layer a bit to make it more specific, and add CSC of Channel to support RGB output. - Bypass Dither block for RGB output. Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Acked-by:
-
Shawn Guo authored
It adds bindings doc for ZTE VOU VGA output device. Signed-off-by:
Rob Herring <robh@kernel.org> Link: http://patchwork.freedesktop.org/patch/msgid/1491490870-6330-4-git-send-email-shawnguo@kernel.org
-
Shawn Guo authored
The CSC (Color Space Conversion) block in VOU is used by not only Graphic Layer (plane) but also channel (CRTC) module. Let's move its register definitions into a common header, so that CRTC driver can include it when needed. Signed-off-by:
-
Shawn Guo authored
Some VOU modules do not work well with clock auto-gating. For example, VGA I2C bus will fail to read EDID data from monitor. Let's not enable this feature by default, and leave it to the possible future low-power optimization. Signed-off-by:
-
- 03 May, 2017 1 commit
-
-
Gustavo Padovan authored
Use "non-blocking" and "blocking" instead of old names. Signed-off-by:
-
- 02 May, 2017 3 commits
-
-
Jeffy Chen authored
Remove unused check and variables after: drm/rockchip: Set line flag config register in vop_crtc_enable Signed-off-by:
Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by:
-
Jyri Sarha authored
Change drm_atomic_replace_property_blob_from_id()'s first parameter from drm_crtc to drm_device, so that the function can be used for other drm_mode_objects too. Signed-off-by:
Jyri Sarha <jsarha@ti.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Jyri Sarha authored
Signed-off-by:
-
- 01 May, 2017 1 commit
-
-
git://github.com/skeggsb/linuxDave Airlie authored
Some nouveau regression fixes. * 'linux-4.12' of git://github.com/skeggsb/linux: drm/nouveau/fb/gf100-: Fix 32 bit wraparound in new ram detection drm/nouveau/secboot/gm20b: fix the error return code in gm20b_secboot_tegra_read_wpr() drm/nouveau/kms: Increase max retries in scanout position queries. drm/nouveau/bios/bitP: check that table is long enough for optional pointers drm/nouveau/fifo/nv40: no ctxsw for pre-nv44 mpeg engine
-
- 29 Apr, 2017 5 commits
-
-
Mario Kleiner authored
A missing u64 cast causes a 32-Bit wraparound from 4096 MiB to 0 MiB and therefore total 0 MiB VRAM detected if card has 4096 Mib per FBP. Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Reviewed-by:
Karol Herbst <karolherbst@gmail.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Wei Yongjun authored
The error return code PTR_ERR(mc) is always 0 since mc is equal to 0 in this error handling case. Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Mario Kleiner authored
So far we only allowed for 1 retry and just failed the query - and thereby high precision vblank timestamping - if we did not get a reasonable result, as such a failure wasn't considered all too horrible. There are a few NVidia gpu models out there which may need a bit more than 1 retry to get a successful query result under some conditions. Since Linux 4.4 the update code for vblank counter and timestamp in drm_update_vblank_count() changed so that the implementation assumes that high precision vblank timestamping of a kms driver either consistently succeeds or consistently fails for a given video mode and encoder/connector combo. Iow. switching from success to fail or vice versa on a modeset or connector change is ok, but spurious temporary failure for a given setup can confuse the core code and potentially cause bad miscounting of vblanks and confusion or hangs in userspace clients which rely on vblank stuff, e.g., desktop compositors. Therefore change the max retry count to a larger number - more than any gpu so far is known to need to succeed, but still low enough so that these queries which do also happen in vblank interrupt are still fast enough to be not disastrously long if something would go badly wrong with them. As such sporadic retries only happen seldom even on affected gpu's, this could mean a vblank irq could take a few dozen microseconds longer every few hours of uptime -- better than a desktop compositor randomly hanging every couple of hours or days of uptime in a hard to reproduce manner. Signed-off-by:
-
Ben Skeggs authored
Fixes OOB VBIOS accesses on some boards. Signed-off-by: -
Ilia Mirkin authored
Signed-off-by:Ilia Mirkin <imirkin@alum.mit.edu>
-
- 28 Apr, 2017 3 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2017-04-27' of git://anongit.freedesktop.org/git/drm-intel into drm-next drm/i915 and gvt fixes for drm-next/v4.12 * tag 'drm-intel-next-fixes-2017-04-27' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: Confirm the request is still active before adding it to the await drm/i915: Avoid busy-spinning on VLV_GLTC_PW_STATUS mmio drm/i915/selftests: Allocate inode/file dynamically drm/i915: Fix system hang with EI UP masked on Haswell drm/i915: checking for NULL instead of IS_ERR() in mock selftests drm/i915: Perform link quality check unconditionally during long pulse drm/i915: Fix use after free in lpe_audio_platdev_destroy() drm/i915: Use the right mapping_gfp_mask for final shmem allocation drm/i915: Make legacy cursor updates more unsynced drm/i915: Apply a cond_resched() to the saturated signaler drm/i915: Park the signaler before sleeping drm/i915/gvt: fix a bounds check in ring_id_to_context_switch_event() drm/i915/gvt: Fix PTE write flush for taking runtime pm properly drm/i915/gvt: remove some debug messages in scheduler timer handler drm/i915/gvt: add mmio init for virtual display drm/i915/gvt: use directly assignment for structure copying drm/i915/gvt: remove redundant ring id check which cause significant CPU misprediction drm/i915/gvt: remove redundant platform check for mocs load/restore drm/i915/gvt: Align render mmio list to cacheline drm/i915/gvt: cleanup some too chatty scheduler message
-
git://people.freedesktop.org/~syeh/repos_linuxDave Airlie authored
trivial patch. * 'drm-vmwgfx-next' of git://people.freedesktop.org/~syeh/repos_linux: drm/vmwgfx: Convert macro to octal representation
-
git://linux-arm.org/linux-ldDave Airlie authored
Latest updates on Mali DP, adding support for colour management, plane scaling and power management. (these have been in -next for a while). * 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld: drm: mali-dp: use div_u64 for expensive 64-bit divisions drm: mali-dp: Check the mclk rate and allow up/down scaling drm: mali-dp: Enable image enhancement when scaling drm: mali-dp: Add plane upscaling support drm/mali-dp: Add core_id file to the sysfs interface drm: mali-dp: Add CTM support drm: mali-dp: enable gamma support drm: mali-dp: add malidp_crtc_state struct drm: mali-dp: add custom reset hook for planes drm: mali-dp: remove unused variable drm: mali-dp: add atomic_print_state for planes drm: mali-dp: Enable power management for the device. drm: mali-dp: Update the state of all planes before re-enabling active CRTCs.
-
- 27 Apr, 2017 2 commits
-
-
Andres Rodriguez authored
When a timeout of zero is specified, the caller is only interested in the fence status. In the current implementation, dma_fence_default_wait will always call schedule_timeout() at least once for an unsignaled fence. This adds a significant overhead to a fence status query. Avoid this overhead by returning early if a zero timeout is specified. v2: move early return after enable_signaling Signed-off-by:
Andres Rodriguez <andresx7@gmail.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Jeffy Chen authored
We need to set vop config done after update line flag config, it's a new requirement for chips newer than rk3368. Since we would only use line flag irq for vact_end, let's move it to vop_crtc_enable. Signed-off-by:
-
- 26 Apr, 2017 9 commits
-
-
Arnd Bergmann authored
On 32-bit machines, we can't divide 64-bit integers: drivers/gpu/drm/arm/malidp_crtc.o: In function `malidp_crtc_atomic_check': malidp_crtc.c:(.text.malidp_crtc_atomic_check+0x3c0): undefined reference to `__aeabi_uldivmod' malidp_crtc.c:(.text.malidp_crtc_atomic_check+0x3dc): undefined reference to `__aeabi_uldivmod' This calls the div_u64 function explicitly instead. Fixes: 4cea4e9f6690 ("drm: mali-dp: Add plane upscaling support") Signed-off-by:Arnd Bergmann <arnd@arndb.de>
-
Chris Wilson authored
Although we do check the completion-status of the request before actually adding a wait on it (either to its submit fence or its completion dma-fence), we currently do not check before adding it to the dependency lists. In fact, without checking for a completed request we may try to use the signaler after it has been retired and its dependency tree freed: [ 60.044057] BUG: KASAN: use-after-free in __list_add_valid+0x1d/0xd0 at addr ffff880348c9e6a0 [ 60.044118] Read of size 8 by task gem_exec_fence/530 [ 60.044164] CPU: 1 PID: 530 Comm: gem_exec_fence Tainted: G E 4.11.0-rc7+ #46 [ 60.044226] Hardware name: ��������������������������������� ���������������������������������/���������������������������������, BIOS RYBDWi35.86A.0246.2 [ 60.044290] Call Trace: [ 60.044337] dump_stack+0x4d/0x6a [ 60.044383] kasan_object_err+0x21/0x70 [ 60.044435] kasan_report+0x225/0x4e0 [ 60.044488] ? __list_add_valid+0x1d/0xd0 [ 60.044534] ? kasan_kmalloc+0xad/0xe0 [ 60.044587] __asan_load8+0x5e/0x70 [ 60.044639] __list_add_valid+0x1d/0xd0 [ 60.044788] __i915_priotree_add_dependency+0x67/0x130 [i915] [ 60.044895] i915_gem_request_await_request+0xa8/0x370 [i915] [ 60.044974] i915_gem_request_await_dma_fence+0x129/0x140 [i915] [ 60.045049] i915_gem_do_execbuffer.isra.37+0xb0a/0x26b0 [i915] [ 60.045077] ? save_stack+0xb1/0xd0 [ 60.045105] ? save_stack_trace+0x1b/0x20 [ 60.045132] ? save_stack+0x46/0xd0 [ 60.045158] ? kasan_kmalloc+0xad/0xe0 [ 60.045184] ? __kmalloc+0xd8/0x670 [ 60.045229] ? drm_ioctl+0x359/0x640 [drm] [ 60.045256] ? SyS_ioctl+0x41/0x70 [ 60.045330] ? i915_vma_move_to_active+0x540/0x540 [i915] [ 60.045360] ? tty_insert_flip_string_flags+0xa1/0xf0 [ 60.045387] ? tty_flip_buffer_push+0x63/0x70 [ 60.045414] ? remove_wait_queue+0xa9/0xc0 [ 60.045441] ? kasan_unpoison_shadow+0x35/0x50 [ 60.045467] ? kasan_kmalloc+0xad/0xe0 [ 60.045494] ? kasan_check_write+0x14/0x20 [ 60.045568] i915_gem_execbuffer2+0xdb/0x2a0 [i915] [ 60.045616] drm_ioctl+0x359/0x640 [drm] [ 60.045705] ? i915_gem_execbuffer+0x5a0/0x5a0 [i915] [ 60.045751] ? drm_version+0x150/0x150 [drm] [ 60.045778] ? compat_start_thread+0x60/0x60 [ 60.045805] ? plist_del+0xda/0x1a0 [ 60.045833] do_vfs_ioctl+0x12e/0x910 [ 60.045860] ? ioctl_preallocate+0x130/0x130 [ 60.045886] ? pci_mmcfg_check_reserved+0xc0/0xc0 [ 60.045913] ? vfs_write+0x196/0x240 [ 60.045939] ? __fget_light+0xa7/0xc0 [ 60.045965] SyS_ioctl+0x41/0x70 [ 60.045991] entry_SYSCALL_64_fastpath+0x17/0x98 [ 60.046017] RIP: 0033:0x7feb2baefc47 [ 60.046042] RSP: 002b:00007fff56d28e58 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 60.046075] RAX: ffffffffffffffda RBX: 00007fff56d290a8 RCX: 00007feb2baefc47 [ 60.046102] RDX: 00007fff56d29050 RSI: 00000000c0406469 RDI: 0000000000000003 [ 60.046129] RBP: 00007fff56d29050 R08: 000055ecc4cd27d0 R09: 00007feb2bda8600 [ 60.046154] R10: 0000000000000073 R11: 0000000000000246 R12: 00000000c0406469 [ 60.046177] R13: 0000000000000003 R14: 000000000000000f R15: 0000000000000099 [ 60.046203] Object at ffff880348c9e680, in cache i915_dependency size: 64 [ 60.046225] Allocated: [ 60.046246] PID = 530 [ 60.046269] save_stack_trace+0x1b/0x20 [ 60.046292] save_stack+0x46/0xd0 [ 60.046318] kasan_kmalloc+0xad/0xe0 [ 60.046343] kasan_slab_alloc+0x12/0x20 [ 60.046368] kmem_cache_alloc+0xab/0x650 [ 60.046445] i915_gem_request_await_request+0x88/0x370 [i915] [ 60.046559] i915_gem_request_await_dma_fence+0x129/0x140 [i915] [ 60.046705] i915_gem_do_execbuffer.isra.37+0xb0a/0x26b0 [i915] [ 60.046849] i915_gem_execbuffer2+0xdb/0x2a0 [i915] [ 60.046936] drm_ioctl+0x359/0x640 [drm] [ 60.046987] do_vfs_ioctl+0x12e/0x910 [ 60.047038] SyS_ioctl+0x41/0x70 [ 60.047090] entry_SYSCALL_64_fastpath+0x17/0x98 [ 60.047139] Freed: [ 60.047179] PID = 530 [ 60.047223] save_stack_trace+0x1b/0x20 [ 60.047269] save_stack+0x46/0xd0 [ 60.047317] kasan_slab_free+0x72/0xc0 [ 60.047366] kmem_cache_free+0x39/0x160 [ 60.047512] i915_gem_request_retire+0x83f/0x930 [i915] [ 60.047657] i915_gem_request_alloc+0x166/0x600 [i915] [ 60.047799] i915_gem_do_execbuffer.isra.37+0xad8/0x26b0 [i915] [ 60.047897] i915_gem_execbuffer2+0xdb/0x2a0 [i915] [ 60.047942] drm_ioctl+0x359/0x640 [drm] [ 60.047968] do_vfs_ioctl+0x12e/0x910 [ 60.047993] SyS_ioctl+0x41/0x70 [ 60.048019] entry_SYSCALL_64_fastpath+0x17/0x98 [ 60.048044] Memory state around the buggy address: [ 60.048066] ffff880348c9e580: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc [ 60.048105] ffff880348c9e600: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc [ 60.048138] >ffff880348c9e680: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 60.048170] ^ [ 60.048191] ffff880348c9e700: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc [ 60.048225] ffff880348c9e780: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc Note to hit the use-after-free requires us to be passed back a request via a fence-array, that is from explicit fencing accumulated into a sync-file fence-array. Fixes: 52e54209 ("drm/i915/scheduler: Record all dependencies upon request construction") Testcase: igt/gem_exec_fence/expired-history Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com>
-
Chris Wilson authored
The busy-spin, as the first stage of intel_wait_for_register(), is currently under suspicion for causing: [ 62.034926] NMI watchdog: Watchdog detected hard LOCKUP on cpu 1 [ 62.034928] Modules linked in: i2c_dev i915 intel_gtt drm_kms_helper prime_numbers [ 62.034932] CPU: 1 PID: 183 Comm: kworker/1:2 Not tainted 4.11.0-rc7+ #471 [ 62.034933] Hardware name: / , BIOS PYBSWCEL.86A.0027.2015.0507.1758 05/07/2015 [ 62.034934] Workqueue: pm pm_runtime_work [ 62.034936] task: ffff880275a04ec0 task.stack: ffffc900002d8000 [ 62.034936] RIP: 0010:__intel_wait_for_register_fw+0x77/0x1a0 [i915] [ 62.034937] RSP: 0018:ffffc900002dbc38 EFLAGS: 00000082 [ 62.034939] RAX: ffffc90003530094 RBX: 0000000000130094 RCX: 0000000000000001 [ 62.034940] RDX: 00000000000000a1 RSI: ffff88027fd15e58 RDI: 0000000000000000 [ 62.034941] RBP: ffffc900002dbc78 R08: 0000000000000002 R09: 0000000000000000 [ 62.034942] R10: ffffc900002dbc18 R11: ffff880276429dd0 R12: ffff8802707c0000 [ 62.034943] R13: 00000000000000a0 R14: 0000000000000000 R15: 00000000fffefc10 [ 62.034945] FS: 0000000000000000(0000) GS:ffff88027fd00000(0000) knlGS:0000000000000000 [ 62.034945] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 62.034947] CR2: 00007ffd3cd98ff8 CR3: 0000000274c19000 CR4: 00000000001006e0 [ 62.034947] Call Trace: [ 62.034948] intel_wait_for_register+0x77/0x140 [i915] [ 62.034949] vlv_suspend_complete+0x23/0x5b0 [i915] [ 62.034950] intel_runtime_suspend+0x16c/0x2a0 [i915] [ 62.034950] pci_pm_runtime_suspend+0x50/0x180 [ 62.034951] ? pci_pm_runtime_resume+0xa0/0xa0 [ 62.034952] __rpm_callback+0xc5/0x210 [ 62.034953] rpm_callback+0x1f/0x80 [ 62.034953] ? pci_pm_runtime_resume+0xa0/0xa0 [ 62.034954] rpm_suspend+0x118/0x580 [ 62.034955] pm_runtime_work+0x64/0x90 [ 62.034956] process_one_work+0x1bb/0x3e0 [ 62.034956] worker_thread+0x46/0x4f0 [ 62.034957] ? __schedule+0x18b/0x610 [ 62.034958] kthread+0xff/0x140 [ 62.034958] ? process_one_work+0x3e0/0x3e0 [ 62.034959] ? kthread_create_on_node+ and related hard lockups in CI for byt and bsw. Note this effectively reverts commits 41ce405e and b2736695 ("drm/i915: Convert wait_for(I915_READ(reg)) to intel_wait_for_register()") v2: Convert bool allow into a u32 mask for clarity and repeat the comment on vlv rc6 timing to justify the 3ms timeout used for the wait (Ville) Fixes: 41ce405e ("drm/i915: Convert wait_for(I915_READ(reg)) to intel_wait_for_register()") Fixes: b2736695 ("drm/i915: Convert wait_for(I915_READ(reg)) to intel_wait_for_register()") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100718Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170421135815.11897-1-chris@chris-wilson.co.ukTested-by:
Tomi Sarvela <tomi.p.sarvela@intel.com> (cherry picked from commit 3dd14c04) Signed-off-by:
-
Chris Wilson authored
Avoid having too large a stack by creating the fake struct inode/file on the heap instead. drivers/gpu/drm/i915/selftests/mock_drm.c: In function 'mock_file': drivers/gpu/drm/i915/selftests/mock_drm.c:46:1: error: the frame size of 1328 bytes is larger than 1280 bytes [-Werror=frame-larger-than=] drivers/gpu/drm/i915/selftests/mock_drm.c: In function 'mock_file_free': drivers/gpu/drm/i915/selftests/mock_drm.c:54:1: error: the frame size of 1312 bytes is larger than 1280 bytes [-Werror=frame-larger-than=] Reported-by:
-
Mika Kuoppala authored
Previously with commit a9c1f90c ("drm/i915: Don't mask EI UP interrupt on IVB|SNB") certain, seemingly unrelated bit (GEN6_PM_RP_UP_EI_EXPIRED) was needed to be unmasked for IVB and SNB in order to prevent system hang with chained batchbuffers. Our CI was seeing incomplete results with tests that used chained batches and it was found out that HSW needs to have this same bit unmasked to reliably survive chained batches. Always unmask GEN6_PM_RP_UP_EI_EXPIRED on Haswell to prevent system hang with batch chaining. Testcase: igt/gem_exec_fence/nb-await-default Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100672 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Acked-by:
-
Dan Carpenter authored
i915_gem_request_alloc() uses error pointers. It never returns NULLs. Fixes: 0daf0113 ("drm/i915: Mock infrastructure for request emission") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170413195217.GA26108@mwandaReviewed-by:
-
Ville Syrjälä authored
Apparently some DP sinks are a little nuts and cause HPD to drop intermittently during modesets. This happens eg. on an ASUS PB287Q. In oder to recover from this we can't really use the previous connector status to determine if the link needs retraining, so let's just ignore that piece of information and do the retrain unconditionally. We do of course still check whether the link is supposed to be running or not. To actually get read out the EDID and update things properly we also need to nuke the goto out added by commit 7d23e3c3 ("drm/i915: Cleaning up intel_dp_hpd_pulse"). I'm actually not sure why that was there. Perhaps to avoid an EDID read if the connector status didn't appear to change, but that sort of thing is quite racy and would have failed anyway if we failed to keep up with the hotplugs (if we missed the HPD down in between two HPD ups). And now that we take this codepath unconditionally we definitely need to drop the goto as otherwise we would never do the EDID read. v2: Drop the goto that made us skip EDID reads entirely. Doh! v3: Rebase due to locking changes s/apparely/apparently/ in the comment (Chris) Cc: stable@vger.kernel.org Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Reported-by:
Palmer Dabbelt <palmer@dabbelt.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99766 References: https://lists.freedesktop.org/archives/intel-gfx/2017-February/119779.htmlSigned-off-by:
-
Chris Wilson authored
[31908.547136] BUG: KASAN: use-after-free in intel_lpe_audio_teardown+0x78/0xb0 [i915] at addr ffff8801f7788358 [31908.547297] Read of size 8 by task drv_selftest/3781 [31908.547405] CPU: 0 PID: 3781 Comm: drv_selftest Tainted: G BU W 4.10.0+ #451 [31908.547553] Hardware name: / , BIOS PYBSWCEL.86A.0027.2015.0507.1758 05/07/2015 [31908.547682] Call Trace: [31908.547772] dump_stack+0x68/0x9f [31908.547857] kasan_object_err+0x1c/0x70 [31908.547947] kasan_report_error+0x1f1/0x4f0 [31908.548038] ? kfree+0xaa/0x170 [31908.548121] kasan_report+0x34/0x40 [31908.548211] ? klist_children_get+0x20/0x30 [31908.548472] ? intel_lpe_audio_teardown+0x78/0xb0 [i915] [31908.548567] __asan_load8+0x5e/0x70 [31908.548824] intel_lpe_audio_teardown+0x78/0xb0 [i915] [31908.549080] intel_audio_deinit+0x28/0x80 [i915] [31908.549315] i915_driver_unload+0xe4/0x360 [i915] [31908.549551] ? i915_driver_load+0x1d70/0x1d70 [i915] [31908.549651] ? trace_hardirqs_on+0xd/0x10 [31908.549885] i915_pci_remove+0x23/0x30 [i915] [31908.549978] pci_device_remove+0x5c/0x100 [31908.550069] device_release_driver_internal+0x1db/0x2e0 [31908.550165] driver_detach+0x68/0xc0 [31908.550256] bus_remove_driver+0x8b/0x150 [31908.550346] driver_unregister+0x3e/0x60 [31908.550439] pci_unregister_driver+0x1d/0x110 [31908.550531] ? find_module_all+0x7a/0xa0 [31908.550791] i915_exit+0x1a/0x87 [i915] [31908.550881] SyS_delete_module+0x264/0x2c0 [31908.550971] ? free_module+0x430/0x430 [31908.551064] ? trace_hardirqs_off_caller+0x16/0x110 [31908.551159] ? trace_hardirqs_on_caller+0x16/0x280 [31908.551256] ? trace_hardirqs_on_thunk+0x1a/0x1c [31908.551350] entry_SYSCALL_64_fastpath+0x1c/0xb1 [31908.551440] RIP: 0033:0x7f1d67312ec7 [31908.551520] RSP: 002b:00007ffebe34e888 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [31908.551650] RAX: ffffffffffffffda RBX: ffffffff811123f6 RCX: 00007f1d67312ec7 [31908.551743] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000560d0af476b8 [31908.551837] RBP: ffff880233d87f98 R08: 0000000000000000 R09: 00007ffebe34e8b8 [31908.551930] R10: 00007f1d68adf8c0 R11: 0000000000000206 R12: 0000000000000000 [31908.552023] R13: 0000560d0af46440 R14: 0000000000000034 R15: 00007ffebe34d860 [31908.552121] ? trace_hardirqs_off_caller+0x16/0x110 [31908.552217] Object at ffff8801f7788000, in cache kmalloc-2048 size: 2048 [31908.552306] Allocated: [31908.552377] PID = 3781 [31908.552456] save_stack_trace+0x16/0x20 [31908.552539] kasan_kmalloc+0xee/0x190 [31908.552627] __kmalloc+0xdb/0x1b0 [31908.552713] platform_device_alloc+0x27/0x90 [31908.552804] platform_device_register_full+0x36/0x220 [31908.553066] intel_lpe_audio_init+0x41e/0x570 [i915] [31908.553320] intel_audio_init+0xd/0x40 [i915] [31908.553552] i915_driver_load+0x13f5/0x1d70 [i915] [31908.553788] i915_pci_probe+0x65/0xe0 [i915] [31908.553881] pci_device_probe+0xda/0x140 [31908.553969] driver_probe_device+0x400/0x660 [31908.554058] __driver_attach+0x11c/0x120 [31908.554147] bus_for_each_dev+0xe6/0x150 [31908.554237] driver_attach+0x26/0x30 [31908.554325] bus_add_driver+0x26b/0x3b0 [31908.554412] driver_register+0xce/0x190 [31908.554502] __pci_register_driver+0xaf/0xc0 [31908.554589] 0xffffffffa0550063 [31908.554675] do_one_initcall+0x8b/0x1e0 [31908.554764] do_init_module+0x102/0x325 [31908.554852] load_module+0x3aad/0x45e0 [31908.554944] SyS_finit_module+0x169/0x1a0 [31908.555033] entry_SYSCALL_64_fastpath+0x1c/0xb1 [31908.555119] Freed: [31908.555188] PID = 3781 [31908.555266] save_stack_trace+0x16/0x20 [31908.555349] kasan_slab_free+0xb0/0x180 [31908.555436] kfree+0xaa/0x170 [31908.555520] platform_device_release+0x76/0x80 [31908.555610] device_release+0x45/0xe0 [31908.555698] kobject_put+0x11f/0x260 [31908.555785] put_device+0x12/0x20 [31908.555871] platform_device_unregister+0x1b/0x20 [31908.556135] intel_lpe_audio_teardown+0x5c/0xb0 [i915] [31908.556390] intel_audio_deinit+0x28/0x80 [i915] [31908.556622] i915_driver_unload+0xe4/0x360 [i915] [31908.556858] i915_pci_remove+0x23/0x30 [i915] [31908.556948] pci_device_remove+0x5c/0x100 [31908.557037] device_release_driver_internal+0x1db/0x2e0 [31908.557129] driver_detach+0x68/0xc0 [31908.557217] bus_remove_driver+0x8b/0x150 [31908.557304] driver_unregister+0x3e/0x60 [31908.557394] pci_unregister_driver+0x1d/0x110 [31908.557653] i915_exit+0x1a/0x87 [i915] [31908.557741] SyS_delete_module+0x264/0x2c0 [31908.557834] entry_SYSCALL_64_fastpath+0x1c/0xb1 [31908.557919] Memory state around the buggy address: [31908.558005] ffff8801f7788200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [31908.558127] ffff8801f7788280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [31908.558255] >ffff8801f7788300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [31908.558374] ^ [31908.558467] ffff8801f7788380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [31908.558595] ffff8801f7788400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb v2: Just leak the memory (8 bytes) as freeing it ourselves is not safe, and we need to coordinate a proper fix in platform_device itself. Fixes: eef57324 ("drm/i915: setup bridge for HDMI LPE audio driver") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99952Signed-off-by:
Takashi Iwai <tiwai@suse.de> Reviewed-by:
-
Chris Wilson authored
Many sightings report the greater prevalence of allocation failures. This is all due to the incorrect use of mapping_gfp_constraint(), so remove it in favour of just querying the mapping_gfp_mask() which are the exact gfp_t we wanted in the first place. We still do expect a higher chance of reporting ENOMEM, as that is the intention of using __GFP_NORETRY -- to fail rather than oom after having reclaimed from our bo caches, and having done a direct|kswapd reclaim pass. Reported-by:
Jason Ekstrand <jason.ekstrand@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100594 Fixes: 24f8e00a ("drm/i915: Prefer to report ENOMEM rather than incur the oom for gfx allocations") Signed-off-by:
-
