- 15 Dec, 2023 39 commits
-
-
Josef Bacik authored
When we remount ro->rw or rw->ro we have some cleanup tasks that have to be managed. Split these out into their own function to make btrfs_remount smaller. Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
Anand Jain <anand.jain@oracle.com> Acked-by:
Christian Brauner <brauner@kernel.org> Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Josef Bacik authored
We currently don't allow these options to be set if we're extent tree v2 via the mount option parsing. However when we switch to the new mount API we'll no longer have the super block loaded, so won't be able to make this distinction at mount option parsing time. Address this by checking for extent tree v2 at the point where we make the decision to rebuild the free space tree. Reviewed-by:
-
Josef Bacik authored
Currently we pre-load the space cache settings in btrfs_parse_options, however when we switch to the new mount API the mount option parsing will happen before we have the super block loaded. Add a helper to set the appropriate options based on the fs settings, this will allow us to have consistent free space cache settings. This also folds in the space cache related decisions we make for subpage sectorsize support, so all of this is done in one place. Since this was being called by parse options it looks like we're changing the behavior of remount, but in fact we aren't. The pre-loading of the free space cache settings is done because we want to handle the case of users not using any space_cache options, we'll derive the appropriate mount option based on the on disk state. On remount this wouldn't reset anything as we'll have cleared the v1 cache generation if we mounted -o nospace_cache. Similarly it's impossible to turn off the free space tree without specifically saying -o nospace_cache,clear_cache, which will delete the free space tree and clear the compat_ro option. Again in this case calling this code in remount wouldn't result in any change. Reviewed-by:
-
Josef Bacik authored
With the new mount API we'll be setting our compression well before we call open_ctree. We don't want to overwrite our settings, so set the default in btrfs_init_fs_info instead of open_ctree. Reviewed-by:
-
Josef Bacik authored
We're going to need to validate mount options after they're all parsed with the new mount API, split this code out into its own helper so we can use it when we swap over to the new mount API. Reviewed-by:
-
Christian Brauner authored
We already communicate to filesystems when a remount request comes from the old mount API as some filesystems choose to implement different behavior in the new mount API than the old mount API to e.g., take the chance to fix significant API bugs. Allow the same for regular mount requests. Fixes: b330966f ("fuse: reject options on reconfigure via fsconfig(2)") Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
-
Filipe Manana authored
After commit ac3c0d36 ("btrfs: make fiemap more efficient and accurate reporting extent sharedness") we no longer need to create special extent maps during fiemap that have a block start with the EXTENT_MAP_DELALLOC value. So this block start value for extent maps is no longer used since then, therefore remove it. Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
-
Qu Wenruo authored
Currently btrfs extent buffer helpers are doing all the cross-page handling, as there is no guarantee that all those eb pages are contiguous. However on systems with enough memory, there is a very high chance the page cache for btree_inode are allocated with physically contiguous pages. In that case, we can skip all the complex cross-page handling, thus speeding up the code. This patch adds a new member, extent_buffer::addr, which is only set to non-NULL if all the extent buffer pages are physically contiguous. Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
-
Johannes Thumshirn authored
Reflow btrfs_free_tree_block() so that there is one level of indentation needed. This patch has no functional changes. Reviewed-by:
-
Johannes Thumshirn authored
Use memset_page() in memset_extent_buffer() instead of opencoding it. This does not not change any functionality. Reviewed-by:
-
Johannes Thumshirn authored
Now that we're not clearing the dirty flag off of extent_buffers in zoned mode, all that is left of btrfs_redirty_list_add() is a memzero() and some ASSERT()ions. As we're also memzero()ing the buffer on write-out btrfs_redirty_list_add() has become obsolete and can be removed. Reviewed-by:
-
Johannes Thumshirn authored
One a zoned filesystem, never clear the dirty flag of an extent buffer, but instead mark it as zeroout. On writeout, when encountering a marked extent_buffer, zero it out. Reviewed-by:
-
Johannes Thumshirn authored
EXTENT_BUFFER_ZONED_ZEROOUT better describes the state of the extent buffer, namely it is written as all zeros. This is needed in zoned mode, to preserve I/O ordering. Reviewed-by:
-
David Sterba authored
The extent_io_tree is embedded in several structures, notably in struct btrfs_inode. The fs_info is only used for reporting errors and for reference in trace points. We can get to the pointer through the inode, but not all io trees set it. However, we always know the owner and can recognize if inode is valid. For access helpers are provided, const variant for the trace points. This reduces size of extent_io_tree by 8 bytes and following structures in turn: - btrfs_inode 1104 -> 1088 - btrfs_device 520 -> 512 - btrfs_root 1360 -> 1344 - btrfs_transaction 456 -> 440 - btrfs_fs_info 3600 -> 3592 - reloc_control 1520 -> 1512 Reviewed-by:
-
David Sterba authored
Pass the type of the extent io tree operation which failed in the report helper. The message wording and contents is updated, though locking might be the cause of the error it's probably not the only one and we're interested in the state. Reviewed-by:
-
David Sterba authored
The printk helpers take const fs_info if it's used just for the identifier in the messages, __btrfs_panic() lacks that. Reviewed-by:
-
David Sterba authored
The helper insert_state errors are handled in all callers and reported by extent_io_tree_panic so we don't need to do it twice. Reviewed-by:
-
David Sterba authored
The per-inode file extent tree was added in 41a2ee75 ("btrfs: introduce per-inode file extent tree"), it's the only tree type that requires the lockdep class. Move it to the file where it is actually used. Reviewed-by:
-
Filipe Manana authored
It's not needed to have a local variable to store the stripe size at insert_dev_extents(), we can just take from the chunk map as it's only used once and typing 'map->stripe_size' is not much more verbose than simply typing 'stripe_size'. So remove the local variable. This was added before the recent addition of a dedicated structure for chunk mappings because the stripe size was encoded in the 'orig_block_len' field of an extent_map structure, so the use of the local variable made things more readable. Reviewed-by:
-
Filipe Manana authored
Currently we abuse the extent_map structure for two purposes: 1) To actually represent extents for inodes; 2) To represent chunk mappings. This is odd and has several disadvantages: 1) To create a chunk map, we need to do two memory allocations: one for an extent_map structure and another one for a map_lookup structure, so more potential for an allocation failure and more complicated code to manage and link two structures; 2) For a chunk map we actually only use 3 fields (24 bytes) of the respective extent map structure: the 'start' field to have the logical start address of the chunk, the 'len' field to have the chunk's size, and the 'orig_block_len' field to contain the chunk's stripe size. Besides wasting a memory, it's also odd and not intuitive at all to have the stripe size in a field named 'orig_block_len'. We are also using 'block_len' of the extent_map structure to contain the chunk size, so we have 2 fields for the same value, 'len' and 'block_len', which is pointless; 3) When an extent map is associated to a chunk mapping, we set the bit EXTENT_FLAG_FS_MAPPING on its flags and then make its member named 'map_lookup' point to the associated map_lookup structure. This means that for an extent map associated to an inode extent, we are not using this 'map_lookup' pointer, so wasting 8 bytes (on a 64 bits platform); 4) Extent maps associated to a chunk mapping are never merged or split so it's pointless to use the existing extent map infrastructure. So add a dedicated data structure named 'btrfs_chunk_map' to represent chunk mappings, this is basically the existing map_lookup structure with some extra fields: 1) 'start' to contain the chunk logical address; 2) 'chunk_len' to contain the chunk's length; 3) 'stripe_size' for the stripe size; 4) 'rb_node' for insertion into a rb tree; 5) 'refs' for reference counting. This way we do a single memory allocation for chunk mappings and we don't waste memory for them with unused/unnecessary fields from an extent_map. We also save 8 bytes from the extent_map structure by removing the 'map_lookup' pointer, so the size of struct extent_map is reduced from 144 bytes down to 136 bytes, and we can now have 30 extents map per 4K page instead of 28. Reviewed-by:
-
Filipe Manana authored
There's no reason to open code what btrfs_next_item() does when searching for extent items at scrub.c:scrub.c:find_first_extent_item(), so remove the logic to find the next item and use btrfs_next_item() instead, making the code shorter and less nested code blocks. While at it also fix the comment to the plural "items" instead of "item" and end it with proper punctuation. Reviewed-by:
-
Filipe Manana authored
The helper extent_map_block_end() is currently not used anywhere outside extent_map.c, so move into from extent_map.h into extent_map.c. While at it, also make the extent map pointer argument as const. Reviewed-by:
-
Filipe Manana authored
When starting a transaction to remove a block group we have one ASSERT that checks we found an extent map and that the extent map's start offset matches the desired chunk offset. In case one of the conditions fails, we get a stack trace that point to the respective line of code, however we can't tell which condition failed: either there's no extent map or we got one with an unexpected start offset. To make such an issue easier to debug and analyse, split the assertion into two, one for each condition. This was actually triggered during development of another upcoming change. Reviewed-by:
-
Filipe Manana authored
When getting a chunk map, at btrfs_get_chunk_map(), we do some sanity checks to verify that we found an extent map and that it includes the requested logical address. These are never expected to fail, so mark them as unlikely to make it more clear as well as to allow a compiler to generate more efficient code. Reviewed-by:
-
David Sterba authored
Looks like the struct member was added in 2007 in 2.6.29 in commit 87ee04eb ("Btrfs: Add simple stripe size parameter") but hasn't been used at all since. So let's remove it. This was found by tool https://github.com/jirislaby/clang-struct, then build tested after removing the struct member. Reviewed-by:
-
David Sterba authored
The declaration was temporarily moved in a4055213 ("btrfs: unexport all the temporary exports for extent-io-tree.c") and then should have been removed in 6.0 in 071d19f5 ("btrfs: remove struct tree_entry in extent-io-tree.c") but was not. This was found by tool https://github.com/jirislaby/clang-struct . Reviewed-by:
-
David Sterba authored
The raid56 changes in 6.2 reworked the IO path to RMW, commit 93723095 ("btrfs: raid56: switch write path to rmw_rbio()") in particular removed the last use of the work member so it can be removed as well. This was found by tool https://github.com/jirislaby/clang-struct . Reviewed-by:
-
David Sterba authored
The whole isize code was deleted in 5.6 3f1c64ce ("btrfs: delete the ordered isize update code"), except the struct member. This was found by tool https://github.com/jirislaby/clang-struct . Reviewed-by:
-
David Sterba authored
The recent scrub rewrite forgot to remove the sectors_per_bio in 6.3 in 13a62fd9 ("btrfs: scrub: remove scrub_bio structure"). This was found by tool https://github.com/jirislaby/clang-struct . Reviewed-by:
-
Qu Wenruo authored
As a cleanup and preparation for future folio migration, this patch would replace all page->private to folio version. This includes: - PagePrivate() -> folio_test_private() - page->private -> folio_get_private() - attach_page_private() -> folio_attach_private() - detach_page_private() -> folio_detach_private() Since we're here, also remove the forced cast on page->private, since it's (void *) already, we don't really need to do the cast. For now even if we missed some call sites, it won't cause any problem yet, as we're only using order 0 folio (single page), thus all those folio/page flags should be synced. But for the future conversion to utilize higher order folio, the page <-> folio flag sync is no longer guaranteed, thus we have to migrate to utilize folio flags. Reviewed-by:
-
David Sterba authored
The pages are now allocated and freed centrally, so we can extend the logic to manage the lifetime. The main idea is to keep a few recently used pages and hand them to all writers. Ideally we won't have to go to allocator at all (a slight performance gain) and also raise chance that we'll have the pages available (slightly increased reliability). In order to avoid gathering too many pages, the shrinker is attached to the cache so we can free them on when MM demands that. The first implementation will drain the whole cache. Further this can be refined to keep some minimal number of pages for emergency purposes. The ultimate goal to avoid memory allocation failures on the write out path from the compression. The pool threshold is set to cover full BTRFS_MAX_COMPRESSED / PAGE_SIZE for minimal thread pool, which is 8 (btrfs_init_fs_info()). This is 128K / 4K * 8 = 256 pages at maximum, which is 1MiB. This is for all filesystems currently mounted, with heavy use of compression IO the allocator is still needed. The cache helps for short burst IO. Reviewed-by:
-
David Sterba authored
This is a preparation for managing compression pages in a cache-like manner, instead of asking the allocator each time. The common allocation and free wrappers are introduced and are functionally equivalent to the current code. The freeing helpers need to be carefully placed where the last reference is dropped. This is either after directly allocating (error handling) or when there are no other users of the pages (after copying the contents). It's safe to not use the helper and use put_page() that will handle the reference count. Not using the helper means there's lower number of pages that could be reused without passing them back to allocator. Reviewed-by:
-
Qu Wenruo authored
[PROBLEM] The function __btrfs_update_delayed_inode() is doing something not meeting the code standard of today: path->slots[0]++ if (path->slots[0] >= btrfs_header_nritems(leaf)) goto search; again: if (!is_the_target_inode_ref()) goto out; ret = btrfs_delete_item(); /* Some cleanup. */ return ret; search: ret = search_for_the_last_inode_ref(); goto again; With the tag named "again", it's pretty common to think it's a loop, but the truth is, we only need to do the search once, to locate the last (also the first, since there should only be one INODE_REF or INODE_EXTREF now) ref of the inode. [FIX] Instead of the weird jumps, just do them in a stream-lined fashion. This removes those weird labels, and add extra comments on why we can do the different searches. Reviewed-by:
-
Filipe Manana authored
The logic in btrfs_block_can_be_shared() is hard to follow as we have a lot of conditions in a single if statement including a subexpression with a logical or and two nested if statements inside the main if statement. Make this easier to read by using separate if statements that return immediately when we find a condition that determines if a block can be or can not be shared. Signed-off-by:
-
Filipe Manana authored
Currently btrfs_block_can_be_shared() returns an int that is used as a boolean. Since it all it needs is to return true or false, and it can't return errors for example, change the return type from int to bool to make it a bit more readable and obvious. Reviewed-by:
-
Filipe Manana authored
The logged_list[2] and log_extents_lock[2] members of struct btrfs_root are no longer used, their last use was removed in commit 5636cf7d ("btrfs: remove the logged extents infrastructure"). So remove these fields. This reduces the size of struct btrfs_root, on a release kernel, from 1392 bytes down to 1352 bytes. Signed-off-by:
-
Filipe Manana authored
The prototype for btrfs_clear_buffer_dirty() is declared in both disk-io.h and extent_io.h, but the function is defined at extent_io.c. So remove the prototype declaration from disk-io.h. Signed-off-by:
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smb client fixes from Steve French: "Address OOBs and NULL dereference found by Dr. Morris's recent analysis and fuzzing. All marked for stable as well" * tag '6.7-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: smb: client: fix OOB in smb2_query_reparse_point() smb: client: fix NULL deref in asn1_ber_decoder() smb: client: fix potential OOBs in smb2_parse_contexts() smb: client: fix OOB in receive_encrypted_standard()
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v6.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Ilpo Järvinen: - tablet-mode-switch events fix - kernel-doc warning fixes * tag 'platform-drivers-x86-v6.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: intel_ips: fix kernel-doc formatting platform/x86: thinkpad_acpi: fix kernel-doc warnings platform/x86: intel-vbtn: Fix missing tablet-mode-switch events
-
- 14 Dec, 2023 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Current release - regressions: - tcp: fix tcp_disordered_ack() vs usec TS resolution Current release - new code bugs: - dpll: sanitize possible null pointer dereference in dpll_pin_parent_pin_set() - eth: octeon_ep: initialise control mbox tasks before using APIs Previous releases - regressions: - io_uring/af_unix: disable sending io_uring over sockets - eth: mlx5e: - TC, don't offload post action rule if not supported - fix possible deadlock on mlx5e_tx_timeout_work - eth: iavf: fix iavf_shutdown to call iavf_remove instead iavf_close - eth: bnxt_en: fix skb recycling logic in bnxt_deliver_skb() - eth: ena: fix DMA syncing in XDP path when SWIOTLB is on - eth: team: fix use-after-free when an option instance allocation fails Previous releases - always broken: - neighbour: don't let neigh_forced_gc() disable preemption for long - net: prevent mss overflow in skb_segment() - ipv6: support reporting otherwise unknown prefix flags in RTM_NEWPREFIX - tcp: remove acked SYN flag from packet in the transmit queue correctly - eth: octeontx2-af: - fix a use-after-free in rvu_nix_register_reporters - fix promisc mcam entry action - eth: dwmac-loongson: make sure MDIO is initialized before use - eth: atlantic: fix double free in ring reinit logic" * tag 'net-6.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits) net: atlantic: fix double free in ring reinit logic appletalk: Fix Use-After-Free in atalk_ioctl net: stmmac: Handle disabled MDIO busses from devicetree net: stmmac: dwmac-qcom-ethqos: Fix drops in 10M SGMII RX dpaa2-switch: do not ask for MDB, VLAN and FDB replay dpaa2-switch: fix size of the dma_unmap net: prevent mss overflow in skb_segment() vsock/virtio: Fix unsigned integer wrap around in virtio_transport_has_space() Revert "tcp: disable tcp_autocorking for socket when TCP_NODELAY flag is set" MIPS: dts: loongson: drop incorrect dwmac fallback compatible stmmac: dwmac-loongson: drop useless check for compatible fallback stmmac: dwmac-loongson: Make sure MDIO is initialized before use tcp: disable tcp_autocorking for socket when TCP_NODELAY flag is set dpll: sanitize possible null pointer dereference in dpll_pin_parent_pin_set() net: ena: Fix XDP redirection error net: ena: Fix DMA syncing in XDP path when SWIOTLB is on net: ena: Fix xdp drops handling due to multibuf packets net: ena: Destroy correct number of xdp queues upon failure net: Remove acked SYN flag from packet in the transmit queue correctly qed: Fix a potential use-after-free in qed_cxt_tables_alloc ...
-
