These enum values are only used in the initialization of the
comedi_subdevices. They don't help make the code any clearer
so just remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some of the information in the boardinfo is common for both boards
supported by this driver. Remove that information from the boardinfo
and just initialize the subdevice values directly.

Also, remove any information in the boardinfo that is not used in
the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Save a copy of the boardinfo pointer in the comedi_device 'board_ptr'.
The subdevice functions can then simply get it using the comedi_board()
helper.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The normal way of presenting the board specific information in comedi
drivers is store the data in a static const array. This data is then
accessed using a pointer, normally the comedi_device 'board_ptr',

Move the boardinfo for the two boards supported by this driver from
the vmk80xx_usb_probe() function into a static const array.

Change the access of this information so a pointer is used.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The usb_driver (*disconnect) in this driver is simply a wrapper around
comedi_auto_unconfig(). Just use comedi_auto_unconfig() directly for
the (*disconnect).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The usb_driver (*disconnect) in this driver calls the comedi core
comedi_usb_auto_unconfig() which calls the comedi_driver (*detach).

Move the code in the (*disconnect) to the (*detach) to get all the
disconnect/detach in one place.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This comedi USB driver supports attaching with the auto config
mechanism. Remove the manual attaching support using the
COMEDI_DEVCONFIG ioctl.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Lockdep complains about recursive deadlock of zram->init_lock.
[1] made it false positive because we can't request IO to zram
before setting disksize. Anyway, we should shut lockdep up to
avoid many reporting from user.

[1] : zram: force disksize setting before using zram
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kbuild bot whinges due to print format mistmatch caused by
zram: force disksize setting before using zram.

This patch fixes it.
Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since 7c65fa2a
'staging: vt6656: Remove QWORD from source and replace with u64.'
a new sparse warning showed up:

'drivers/staging/vt6656/card.c:798:26: sparse: constant
 0xffffffff00000000U is so big it is unsigned long'

-> Append L to fix the warning.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Cc: Forest Bond <forest@alittletooquiet.net>
Cc: Malcolm Priestley <tvboxspy@gmail.com>
Cc: "Justin P. Mattock" <justinmattock@gmail.com>
Cc: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MCLKData does not contain any 0x1C value for its field SR28 nor does
XGI340_ECLKData contain any 0x1C or 0x22 value for its field SR2E.

-> the statement always evaluates to false.
-> remove
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pVBInfo->ram_type is assigned the return value of
XGINew_GetXG20DRAMType which can only be 0, 1 or 2

-> The conditional assignment is not needed here as it always evaluates
to true.
-> remove
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In the lookup table XGI340_ECLKData only the first three 'lines' are
used, thus the remaining entries can be removed.

Rationale:
- vb_init.c uses pVBInfo->ram_type as the index for XGI340_ECLKData.

- pVBInfo->ram_type is assigned the return value of
XGINew_GetXG20DRAMType which can only be 0, 1 or 2

-> only the first three values are used.
-> remove the remeining entries.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In the lookup tables XGI340New_MCLKData and XGI27New_MCLKData only the
first three 'lines' are used, thus the remaining fields can be removed.

Rationale:
- vb_init.c uses pVBInfo->ram_type as the index for pVBInfo->MCLKData

- pVBInfo->ram_type is assigned the return value of
XGINew_GetXG20DRAMType which can only be 0, 1 or 2

- pVBInfo->MCLKData is assigned to either XGI340New_MCLKData or
XGI27New_MCLKData in vb_setmode.c

-> only the first three values are used, the rest can be removed.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

 In the lookup tables XG27_SR13 and XGI340_SR13 only the first three
 values are used of each 'line', thus the remaining fields can be
 removed.

Rationale:
- vb_init.c uses pVBInfo->ram_type for the 'column' index for
pVBInfo->SR15.

- pVBInfo->ram_type is assigned the return value of
XGINew_GetXG20DRAMType which can only be 0, 1 or 2

- pVBInfo->SR15 is assigned to either XG27_SR13 or XGI340_SR13 in
vb_setmode.c

-> only the first three values are used.
This becomes also evident as values 3-7 are all 0.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In the lookup tables XGI340_cr41 and XGI27_cr41 only the first three
values are used of each 'line', thus the remaining fields can be
removed.

Rationale:
- vb_init.c uses pVBInfo->ram_type for the 'column' index for
pVBInfo->CR40.

- pVBInfo->ram_type is assigned the return value of
  XGINew_GetXG20DRAMType which can only be 0, 1 or 2

- pVBInfo->CR40 is assigned to either XGI340_cr41 or XGI27_cr41 in
vb_setmode.c

-> only the first three values are used.
This becomes also evident as values 3-7 are all 0.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

After the patch
'staging/xgifb: Don't write the same values x times'
the local variable i is unused, which leads to the following warning:

driverrs/staging/xgifb/vb_init.c: In function
‘XGINew_SetDRAMDefaultRegister340’:
drivers/staging/xgifb/vb_init.c:433:43: warning: unused variable ‘i’
[-Wunused-variable]

This patch fixes this
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-3.9c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

"Third set of IIO new drivers, cleanups and fixes for the 3.9 cycle

New drivers
1) A driver for ST microelectronics sensors.  This driver already covers
   a large set of new parts (20 gyros, accelerometer and magnetometers)
   not currently covered by the existing drivers.  The intent moving forward
   is to merge this with the other drivers for similar parts already in tree.
   The lis3l02dq driver currently in staging/iio will be trivial, the lis3
   driver in misc more complex as it has a number of additional interfaces.
   Any merging in of the lis3 driver will rely on the not currently
   merged iio_input bridge driver and handling of freefall notifications
   etc.

2) A driver for the itg3200 gyroscope.

Graduations from staging
1) Cleanup and move out of staging of the adxrs450 gyroscope driver.  The
   cleanup required was all minor but there were a couple of fixes hidden in
   there.

Core and driver additions
1) Initial work from Guenter Roeck on device tree support for IIO's provider/
   consumer code. Focuses on the iio_hwmon driver and the max1363 adc driver.
   The full device tree syntax is currently under discussion but should
   follow shortly.

Cleanups and fixes
1) Remove a noop function __iio_update_buffer
2) Couple of small fixes and cleanups for the max1363
"

Some low-level comedi drivers (incorrectly) point `dev->read_subdev` or
`dev->write_subdev` to a subdevice that does not support asynchronous
commands.  Comedi's poll(), read() and write() file operation handlers
assume these subdevices do support asynchronous commands.  In
particular, they assume `s->async` is valid (where `s` points to the
read or write subdevice), which it won't be if it has been set
incorrectly.  This can lead to a NULL pointer dereference.

Check `s->async` is non-NULL in `comedi_poll()`, `comedi_read()` and
`comedi_write()` to avoid the bug.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This module parameter is used to enable the auto config mechanism
in the comedi core. Most of the PCI, PCMCIA, and USB drivers have
been converted to use the auto config mechanism and will not attach
if it is disabled.

Since the 'comedi_autoconfig' parameter is defaulted to true, just
remove it so that the comedi drivers that use auto config will
always be able to attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Factor the code that programs the analog input scanlist out of the
daqp_ai_insn_read() and daqp_ai_cmd() functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The (*insn_write) functions are expected to write 'insn->n' number
of samples to the channel. Fix this function so it works as the
comedi core expects.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the subdevice operation used to write the digital outputs from
a (*insn_write) to a (*insn_bits) function. The (*insn_write) functions
are expected to write 'insn->n' number of samples. The (*insn_bits)
functions just write a single sample (insn->n = 1). Change the return
from '1' to 'insn->n' to clarify what the return is.

Using an (*insn_bits) function to write the digital outputs also allows
the user to read the current state of the output channels.

Fix the io operation used to update the digital outputs. The register is
only 8-bits and should by updated with an outb() not an outw().

Also, set the 'maxdata' for the subdevice. For digital io this value
should be '1' (digital io can only be 1 or 0).

Remove the setting of the len_chanlist for the subdevice. This variable
only has meaning for subdevices that support asynchronous commands. The
comedi core will initialize it appropriately during the postconfig.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the subdevice operation used to read the digital inputs from
a (*insn_read) to a (*insn_bits) function. The (*insn_read) functions
are expected to read 'insn->n' number of samples. The (*insn_bits)
functions just read a single sample (insn->n = 1). Change the return
from '1' to 'insn->n' to clarify what the return is.

Also, set the 'maxdata' for the subdevice. For digital io this value
should be '1' (digital io can only be 1 or 0).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The MAX_DEV define is no longer used in this driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The private data in this driver is associated with the comedi_device
pointer not the pcmcia_device. For aesthetic reasons, rename the
private data struct from local_into_t to daqp_private.

Also, rename the local variables used for the private data from
local to devpriv as that is more common in the comedi drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All the comedi_subdevices in this driver use the same 'local' private data.
Instead of storing the pointer to the private data in each subdevice, just
store it in the comedi_device.

Also, instead of passing the private data pointer to pcmcia_request_irq()
in link->priv, pass the comedi_device pointer. This allows removing the
comedi_device and comedi_subdevice pointers from the private data. We can
get them as needed from the void * in the interrupt function.

Fix the pcmcia suspend/resume functions so they use the comedi_device
pointer stored in link->priv to then get the private data pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The analog output subdevice does not support aynchronous commands.
Don't set the dev->write_subdev to this subdevice.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The (*detach) function, daqp_detach() is now a simple wrapper around
comedi_pcmcia_disable(). Just use comedi_pcmcia_disable() directly for
the (*detach).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the comedi_pcmcia_{enable,disable} helpers to enable/disable
the PCMCIA device.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert this pcmcia driver to the comedi auto attach mechanism.

This allows getting rid of the static data that held "A list of
"instances" of the device" that was used to pass the pcmcia_device
pointer from the pcmcia_driver to the comedi_driver.

Also, remove the now unused variables in the private data that
were used to pass the pcmcia_device.

Remove the code that pulled the model number of the card out of
the PCMCIA CIS and stashed it in the private data since it is
not used in the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1) The same condition (pVBInfo->IF_DEF_LVDS == 0) was checked in the if
clause directly in front of this one.

2) The same condition pVBInfo->VBType & (VB_SIS301B | VB_SIS302B |
VB_SIS301LV | VB_SIS302LV | VB_XGI301C) was checked in the if
clause directly in front of this one.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since XGI_LCDDesStruct is fully contained in XGI330_LCDDataDesStruct2
and the offsets for the first members is identical we can consolidate
the if/else branches here and use XGI330_LCDDataDesStruct2 for
everything.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

With the previous patch 'Move duplicated code for dram to helper
function' it becomes evident that the code is performing the same
thing 4 or 8 times in a row without changing arguments to the function
and thus writing the same values over and over again.

It was tested that these repeats are unnecessary.

-> we can safely remove them.
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

XGINew_SetDRAMDefaultRegister340 uses the same code fragment 4 times
with only a slight variation each time.
-> Move this code to a helper function - this saves some lines and
~450bytes in the .o / .ko
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The XGI340_CR6B lookup table consists of the entries
{0xaa, 0xaa, 0xaa, 0xaa} for an index <= 2 and
{0x00, 0x00, 0x00, 0x00} for all other indices.

The only user XGINew_SetDRAMDefaultRegister340 loops over these 4 values
of a line with a for loop and since all entries are the same for each line
we can simply replace the whole lookup table with a simple if/else assignment.
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The (*detach) function, daq700_detach() is now a simple wrapper around
comedi_pcmcia_disable(). Just use comedi_pcmcia_disable() directly for
the (*detach).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the comedi_pcmcia_{enable,disable} helpers to enable/disable
the PCMCIA device.

This driver does not use interrupts and is not an audio device,
remove CONF_ENABLE_IRQ and CONF_AUTO_AUDIO from the link->config_flags.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the comedi_pcmcia_{enable,disable} helpers to enable/disable
the PCMCIA device.

This driver does not use interrupts so remove CONF_ENABLE_IRQ from
the link->config_flags.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The (*detach) function, das16cs_detach() is a simple wrapper around
comedi_pcmcia_disable(). Just use comedi_pcmcia_disable() directly
for the (*detach).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>