Merge tag 'riscv-firmware-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers

RISC-V firmware drivers for v6.11

Microchip:
Support for writing "bitstream info" to the flash using the auto-update
driver. At this point the "bitstream info" is a glorified dtbo wrapper,
but there's plans to add more info there in the future. Additionally,
rework some allocations in the driver and use scope-based cleanup on
them.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

* tag 'riscv-firmware-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
  firmware: microchip: use scope-based cleanup where possible
  firmware: microchip: move buffer allocation into mpfs_auto_update_set_image_address()
  firmware: microchip: support writing bitstream info to flash

Link: https://lore.kernel.org/r/20240707-lukewarm-film-8a9da40a1c27@spudSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'riscv-cache-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers

RISC-V cache drivers for v6.11

StarFive:
A new driver for the cache controller on the jh8100, which didn't
implement Zicbom and thus needs an implementation of non-standard cache
management operations.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

* tag 'riscv-cache-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
  MAINTAINERS: add microchip soc binding directory to microchip soc driver entry
  MAINTAINERS: add cache binding directory to cache driver entry
  cache: Add StarFive StarLink cache management
  dt-bindings: cache: Add docs for StarFive Starlink cache controller

Link: https://lore.kernel.org/r/20240707-whoever-undesired-c5f6e96ae403@spudSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-6.11-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers

soc/tegra: Changes for v6.11-rc1

This is a simple change that condenses two function calls into one in
two places to save some boilerplate.

* tag 'tegra-for-6.11-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  soc/tegra: pmc: Simplify resource lookup

Link: https://lore.kernel.org/r/20240628210818.3627404-1-thierry.reding@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'amlogic-drivers-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/drivers

Amlogic drivers changes for v6.11:
- Add S905L & A113X SoC IDs
- add missing MODULE_DESCRIPTION() macro for meson_sm driver

* tag 'amlogic-drivers-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
  firmware: meson_sm: add missing MODULE_DESCRIPTION() macro
  soc: amlogic: meson-gx-socinfo: add new A113X SoC id
  soc: amlogic: meson-gx-socinfo: Add S905L ID

Link: https://lore.kernel.org/r/35093904-c4a8-432d-b010-a994fc1ee536@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Add support for true random number generator provided by the MCU.
New Omnia boards come without the Atmel SHA204-A chip. Instead the
crypto functionality is provided by new microcontroller, which has
a TRNG peripheral.
Signed-off-by: Marek Behún <kabel@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240701113010.16447-7-kabel@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Add support for the watchdog mechanism provided by the MCU.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240701113010.16447-6-kabel@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Add support for true board poweroff (MCU can disable all unnecessary
voltage regulators) and wakeup at a specified time, implemented via a
RTC driver so that the rtcwake utility can be used to configure it.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240701113010.16447-5-kabel@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Add support for GPIOs connected to the MCU on the Turris Omnia board.

This includes:
- front button pin
- enable pins for USB regulators
- MiniPCIe / mSATA card presence pins in MiniPCIe port 0
- LED output pins from WAN ethernet PHY, LAN switch and MiniPCIe ports
- on board revisions 32+ also various peripheral resets and another
  voltage regulator enable pin
Signed-off-by: Marek Behún <kabel@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240701113010.16447-4-kabel@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Add the basic skeleton for a new platform driver for the microcontroller
found on the Turris Omnia board.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240701113010.16447-3-kabel@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Add binding for cznic,turris-omnia-mcu, the device-tree node
representing the system-controller features provided by the MCU on the
Turris Omnia router.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240701113010.16447-2-kabel@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'mtk-soc-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/drivers

MediaTek driver updates for v6.11

This adds the previously missed Tone Curve Conversion (TCC)
MuteX bit to enable the same in MDP3 on the the MT8188 SoC,
disables 9-bit Alpha for display HDR support in MT8195 and
adds math operation support in the Global Command Engine for
all MediaTek SoCs, which will be used in the near future in
the ISP driver.

* tag 'mtk-soc-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
  soc: mtk-cmdq: Add cmdq_pkt_logic_command to support math operation
  soc: mediatek: Disable 9-bit alpha in ETHDR
  soc: mediatek: mtk-mutex: Add MDP_TCC0 mod to MT8188 mutex table

Link: https://lore.kernel.org/r/20240628093801.126013-3-angelogioacchino.delregno@collabora.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

I noticed that there's technically not an explicit maintainer for this
directory, even if the files currently in it are covered by either the
Mircochip FPGA or AT91 entries. Add it to the entry covering the
corresponding driver directory.
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

The directory covering cache controller bindings has no MAINTAINER other
than the fallback to myself, Rob and Krzysztof. Add it to the entry for
the corresponding drivers.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

Merge tag 'optee-notif-wait-timeout-for-v6.11' of https://git.linaro.org/people/jens.wiklander/linux-tee into soc/drivers

optee: add timeout parameter for notification wait

* tag 'optee-notif-wait-timeout-for-v6.11' of https://git.linaro.org/people/jens.wiklander/linux-tee:
  optee: add timeout value to optee_notif_wait() to support timeout

Link: https://lore.kernel.org/r/20240627095325.GA2585076@raydenSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Reset controller updates for v6.11

Move reset controller registration to the end in rzg2l-usbphy-ctrl, to
simplify the probe error path, add a new i.MX8MP AudioMix reset driver,
allow to build some drivers under COMPILE_TEST with fewer dependencies,
and use the devm_clk_get_enabled convenience wrapper in meson-audio-arb.

The latter causes a trivial merge conflict [1] with

  b99e9c09 ("reset: meson-audio-arb: Convert to platform remove callback returning void")

because I didn't manage to send that in last round. There is no overlap
though.

[1] https://lore.kernel.org/all/Znmufb9L78FCoSSS@sirena.org.uk/

* tag 'reset-for-v6.11' of git://git.pengutronix.de/pza/linux:
  reset: RESET_IMX8MP_AUDIOMIX should depend on ARCH_MXC
  reset: zynqmp: allow building under COMPILE_TEST
  reset: imx8mp-audiomix: Add AudioMix Block Control reset driver
  reset: meson-audio-arb: Use devm_clk_get_enabled()
  reset: sti: allow building under COMPILE_TEST
  reset: rzg2l-usbphy-ctrl: Move reset controller registration

Link: https://lore.kernel.org/r/20240626163258.61222-1-p.zabel@pengutronix.deSigned-off-by: Arnd Bergmann <arnd@arndb.de>

With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/imx/soc-imx8m.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/ixp4xx/ixp4xx-qmgr.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/ixp4xx/ixp4xx-npe.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/mediatek/mtk-cmdq-helper.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/amlogic/meson-clk-measure.o

Add the missing invocations of the MODULE_DESCRIPTION() macro.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> # for amlogic/meson-clk-measure.c
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240625-md-drivers-soc-v2-1-8bc7c03e3e69@quicinc.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'ffa-updates-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers

Arm FF-A driver updates for  v6.11

The main addition is the split of bus and driver into distinct modules
The FF-A bus module is initialized at subsys_initcall level when builtin.

FF-A drivers initialization is now changed to module_init level so that
pKVM ffa proxy is all setup and running in case pKVM hypervisor needs to
trap and handle FF-A calls.

One of the reason for not having this split from the beginning is the
need to workaround the FF-A v1.0 NULL UUID. The FF-A bus layer called
into FF-A driver and populated the device UUID if it matches with the
driver attempting to match. Moving the workaround away from the FF-A
bus layer to the FF-A core driver as a bus notifier will help to remove
the dependency.

* tag 'ffa-updates-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  firmware: arm_ffa: Split bus and driver into distinct modules
  firmware: arm_ffa: Move the FF-A v1.0 NULL UUID workaround to bus notifier

Link: https://lore.kernel.org/r/20240624103451.2870146-1-sudeep.holla@arm.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'scmi-updates-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers

Arm SCMI driver updates for v6.11

The main addition this time is the support for platform to agent(p2a
also referred sometimes as notification or Rx) channel completion via
interrupt driven method. Currently, the OSPM agent clears or
acknowledge the receipt of the norification or delayed response by
updating the flags in the shared memory region which the platform is
expected to poll.

On some platforms that are completely interrupt driven, the OSPM
agent is expected to send a response message instead. This change
adds the support for the same.

Other changes include addition of a separate mailing list specific to
SCMI to allow open discussions about the interface itself in addition
to the kernel driver updates and support for system suspend via the
platform noification used on some systems.

* tag 'scmi-updates-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  firmware: arm_scmi: Add support for platform to agent channel completion
  dt-bindings: firmware: arm,scmi: Add support for notification completion channel
  firmware: arm_scmi: Add support for system suspend in power control driver
  MAINTAINERS: Add mailing list for SCMI drivers

Link: https://lore.kernel.org/r/20240620093924.375244-3-sudeep.holla@arm.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Add cmdq_pkt_logic_command to support math operation.

cmdq_pkt_logic_command can append logic command to the CMDQ packet,
ask GCE to execute a arithmetic calculate instruction,
such as add, subtract, multiply, AND, OR and NOT, etc.

Note that all arithmetic instructions are unsigned calculations.
If there are any overflows, GCE will sent the invalid IRQ to notify
CMDQ driver.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://lore.kernel.org/r/20240625083957.3540-1-jason-jh.lin@mediatek.comSigned-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

When 9-bit alpha is enabled, its value will be converted from 0-255 to
0-256 (255 = not defined). This is designed for special HDR related
calculation, which should be disabled by default, otherwise, alpha
blending will not work correctly.
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240620-9bit_alpha-v1-1-13c69daaf29f@mediatek.comSigned-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

MT8188's MDP3 is able to use MDP_TCC0, this mutex_mod bit does
actually exist and it's the same as MT8195: add it to the table.

Fixes: 26bb17da ("soc: mediatek: mtk-mutex: Add support for MT8188 VPPSYS")
Reviewed-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20240619103034.110377-1-angelogioacchino.delregno@collabora.comSigned-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Commit 6f4429e2 ("soc/tegra: pmc: Update address mapping sequence
for PMC apertures") updated the resource lookup code in the PMC driver.
Instead of calling platform_get_resource_byname() and
devm_ioremap_resource() simplify the code by simply calling
devm_platform_ioremap_resource_byname().
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The i.MX8MP AudioMix reset controller is only present on Freescale i.MX8
SoCs.  Hence add a dependency on ARCH_MXC, to prevent asking the user
about this driver when configuring a kernel without i.MX SoC support.

Fixes: fe125601 ("reset: imx8mp-audiomix: Add AudioMix Block Control reset driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/6d8116a56186fbf468229e823c7c8dfcd9488959.1719316665.git.geert+renesas@glider.beSigned-off-by: Philipp Zabel <p.zabel@pengutronix.de>

The ZynqMP reset driver can be compiled without ARCH_ZYNQMP being
enabled. Allow it to be built under COMPILE_TEST.
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20240621-reset-compile-zynqmp-v1-1-ede43ab18101@pengutronix.deSigned-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Add support for the resets on i.MX8MP Audio Block Control module,
which includes the EARC PHY software reset and EARC controller
software reset. The reset controller is created using the auxiliary
device framework and set up in the clock driver.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/1719200345-32006-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Philipp Zabel <p.zabel@pengutronix.de>

With ARCH=arm64, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/firmware/meson/meson_sm.o

Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240613-md-arm64-drivers-firmware-meson-v1-1-28e4138a8597@quicinc.comSigned-off-by: Neil Armstrong <neil.armstrong@linaro.org>

Use devm_clk_get_enabled() to reduce a bit of boilerplate and to
disable the clock in case devm_reset_controller_register() fails.
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240621-reset-devm-clk-get-enabled-v1-1-8408c7962b6c@pengutronix.deSigned-off-by: Philipp Zabel <p.zabel@pengutronix.de>

The STIH407 reset driver can be compiled without ARCH_STI being
enabled. Allow it to be built under COMPILE_TEST.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20240621-reset-compile-sti-v1-1-b7a66ce29911@pengutronix.deSigned-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Pull i2c fixes from Wolfram Sang:
 "The core gains placeholders for recently added functions when
  CONFIG_I2C is not defined as well documentation fixes to start using
  inclusive terminology.

  The drivers get paths in DT bindings fixed as well as proper interrupt
  handling for the ocores driver"

* tag 'i2c-for-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  docs: i2c: summary: be clearer with 'controller/target' and 'adapter/client' pairs
  docs: i2c: summary: document 'local' and 'remote' targets
  docs: i2c: summary: document use of inclusive language
  docs: i2c: summary: update speed mode description
  docs: i2c: summary: update I2C specification link
  docs: i2c: summary: start sentences consistently.
  i2c: Add nop fwnode operations
  i2c: ocores: set IACK bit after core is enabled
  dt-bindings: i2c: google,cros-ec-i2c-tunnel: correct path to i2c-controller schema
  dt-bindings: i2c: atmel,at91sam: correct path to i2c-controller schema

Pull smb client fixes from Steve French:
 "Five smb3 client fixes

   - three nets/fiolios cifs fixes

   - fix typo in module parameters description

   - fix incorrect swap warning"

* tag '6.10-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Move the 'pid' from the subreq to the req
  cifs: Only pick a channel once per read request
  cifs: Defer read completion
  cifs: fix typo in module parameter enable_gcm_256
  cifs: drop the incorrect assertion in cifs_swap_rw()

Pull memblock fix from Mike Rapoport:
 "Fix fragility in checks for unset node ID.

  Use numa_valid_node() function to verify that nid is a valid node
  ID instead of inconsistent comparisons with either NUMA_NO_NODE or
  MAX_NUMNODES"

* tag 'fixes-2024-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  memblock: use numa_valid_node() helper to check for invalid node ID

Pull MIPS fixes from Thomas Bogendoerfer:

 - fix lseek in o32 compat mode

 - fix for microMIPS MT ASE helpers

* tag 'mips-fixes_6.10_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  mips: fix compat_sys_lseek syscall
  MIPS: mipsmtregs: Fix target register for MFTC0

Pull x86 fixes from Borislav Petkov:

 - An ARM-relevant fix to not free default RMIDs of a resource control
   group

 - A randconfig build fix for the VMware virtual GPU driver

* tag 'x86_urgent_for_v6.10_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/resctrl: Don't try to free nonexistent RMIDs
  drm/vmwgfx: Fix missing HYPERVISOR_GUEST dependency

Pull powerpc fixes from Michael Ellerman:

 - Prevent use-after-free in 64-bit KVM VFIO

 - Add generated Power8 crypto asm to .gitignore

Thanks to Al Viro and Nathan Lynch.

* tag 'powerpc-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  KVM: PPC: Book3S HV: Prevent UAF in kvm_spapr_tce_attach_iommu_group()
  powerpc/crypto: Add generated P8 asm to .gitignore

Merge tag 'i2c-host-fixes-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

This pull request fixes the paths of the dt-schema to their
complete locations for the ChromeOS EC tunnel driver and the
Atmel at91sam drivers.

Additionally, the OpenCores driver receives a fix for an issue
that dates back to version 2.6.18. Specifically, the interrupts
need to be acknowledged (clearing all pending interrupts) after
enabling the core.

Pull rust fix from Miguel Ojeda:

 - Avoid unused import warning in 'rusttest'.

* tag 'rust-fixes-6.10' of https://github.com/Rust-for-Linux/linux:
  rust: avoid unused import warning in `rusttest`

Merge tag 'regulator-fix-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "A few driver specific fixes for incorrect device descriptions, plus a
  fix for a missing symbol export which causes build failures for some
  newly added drivers in other trees"

* tag 'regulator-fix-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: axp20x: AXP717: fix LDO supply rails and off-by-ones
  regulator: bd71815: fix ramp values
  regulator: core: Fix modpost error "regulator_get_regmap" undefined
  regulator: tps6594-regulator: Fix the number of irqs for TPS65224 and TPS6594

Pull spi fixes from Mark Brown:
 "A number of fixes that have built up for SPI, a bunch of driver
  specific ones including an unfortunate revert of an optimisation for
  the i.MX driver which was causing issues with some configurations,
  plus a couple of core fixes for the rarely used octal mode and for a
  bad interaction between multi-CS support and target mode"

* tag 'spi-fix-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spi-imx: imx51: revert burst length calculation back to bits_per_word
  spi: Fix SPI slave probe failure
  spi: Fix OCTAL mode support
  spi: stm32: qspi: Clamp stm32_qspi_get_mode() output to CCR_BUSWIDTH_4
  spi: stm32: qspi: Fix dual flash mode sanity test in stm32_qspi_setup()
  spi: cs42l43: Drop cs35l56 SPI speed down to 11MHz
  spi: cs42l43: Correct SPI root clock speed

Pull nfsd fixes from Chuck Lever:

 - Fix crashes triggered by administrative operations on the server

* tag 'nfsd-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  NFSD: grab nfsd_mutex in nfsd_nl_rpc_status_get_dumpit()
  nfsd: fix oops when reading pool_stats before server is started