It turns out that alloc_pages_bulk_array() does not treat the page_array
parameter as an output parameter, but rather reads the array and skips any
entries that have already been allocated.

This is somewhat unexpected and breaks this test, as we allocate the pages
array uninitialised on the assumption it will be overwritten.

As a result, the test was referencing uninitialised data and causing the
PFN to not be valid and thus a WARN_ON() followed by a null pointer deref
and panic.

In addition, this is an array of pointers not of struct page objects, so we
need only allocate an array with elements of pointer size.

We solve both problems by simply using kcalloc() and referencing
sizeof(struct page *) rather than sizeof(struct page).

Link: https://lkml.kernel.org/r/20230524082424.10022-1-lstoakes@gmail.com
Fixes: 869cb29a ("lib/test_vmalloc.c: add vm_map_ram()/vm_unmap_ram() test case")
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Syzbot reports that in its stress test for resize ioctl, the log writing
function nilfs_segctor_do_construct hits a WARN_ON in
nilfs_segctor_truncate_segments().

It turned out that there is a problem with the current implementation of
the resize ioctl, which changes the writable range on the device (the
range of allocatable segments) at the end of the resize process.

This order is necessary for file system expansion to avoid corrupting the
superblock at trailing edge.  However, in the case of a file system
shrink, if log writes occur after truncating out-of-bounds trailing
segments and before the resize is complete, segments may be allocated from
the truncated space.

The userspace resize tool was fine as it limits the range of allocatable
segments before performing the resize, but it can run into this issue if
the resize ioctl is called alone.

Fix this issue by changing nilfs_sufile_resize() to update the range of
allocatable segments immediately after successful truncation of segment
space in case of file system shrink.

Link: https://lkml.kernel.org/r/20230524094348.3784-1-konishi.ryusuke@gmail.com
Fixes: 4e33f9ea ("nilfs2: implement resize ioctl")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+33494cd0df2ec2931851@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/0000000000005434c405fbbafdc5@google.comTested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

If profile-guided optimization is enabled, the purgatory ends up with
multiple .text sections.  This is not supported by kexec and crashes the
system.

Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-4-b05c520b7296@chromium.org
Fixes: 93045705 ("kernel/kexec_file.c: split up __kexec_load_puragory")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Cc: <stable@vger.kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

If profile-guided optimization is enabled, the purgatory ends up with
multiple .text sections.  This is not supported by kexec and crashes the
system.

Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-3-b05c520b7296@chromium.org
Fixes: 93045705 ("kernel/kexec_file.c: split up __kexec_load_puragory")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: <stable@vger.kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

If profile-guided optimization is enabled, the purgatory ends up with
multiple .text sections.  This is not supported by kexec and crashes the
system.

Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-2-b05c520b7296@chromium.org
Fixes: 93045705 ("kernel/kexec_file.c: split up __kexec_load_puragory")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Cc: <stable@vger.kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "kexec: Fix kexec_file_load for llvm16 with PGO", v7.

When upreving llvm I realised that kexec stopped working on my test
platform.

The reason seems to be that due to PGO there are multiple .text sections
on the purgatory, and kexec does not supports that.


This patch (of 4):

Clang16 links the purgatory text in two sections when PGO is in use:

  [ 1] .text             PROGBITS         0000000000000000  00000040
       00000000000011a1  0000000000000000  AX       0     0     16
  [ 2] .rela.text        RELA             0000000000000000  00003498
       0000000000000648  0000000000000018   I      24     1     8
  ...
  [17] .text.hot.        PROGBITS         0000000000000000  00003220
       000000000000020b  0000000000000000  AX       0     0     1
  [18] .rela.text.hot.   RELA             0000000000000000  00004428
       0000000000000078  0000000000000018   I      24    17     8

And both of them have their range [sh_addr ... sh_addr+sh_size] on the
area pointed by `e_entry`.

This causes that image->start is calculated twice, once for .text and
another time for .text.hot. The second calculation leaves image->start
in a random location.

Because of this, the system crashes immediately after:

kexec_core: Starting new kernel

Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-0-b05c520b7296@chromium.org
Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-1-b05c520b7296@chromium.org
Fixes: 93045705 ("kernel/kexec_file.c: split up __kexec_load_puragory")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

We used to not pass in the pgoff correctly when register/unregister uffd
regions, it caused incorrect behavior on vma merging and can cause
mergeable vmas being separate after ioctls return.

For example, when we have:

  vma1(range 0-9, with uffd), vma2(range 10-19, no uffd)

Then someone unregisters uffd on range (5-9), it should logically become:

  vma1(range 0-4, with uffd), vma2(range 5-19, no uffd)

But with current code we'll have:

  vma1(range 0-4, with uffd), vma3(range 5-9, no uffd), vma2(range 10-19, no uffd)

This patch allows such merge to happen correctly before ioctl returns.

This behavior seems to have existed since the 1st day of uffd.  Since
pgoff for vma_merge() is only used to identify the possibility of vma
merging, meanwhile here what we did was always passing in a pgoff smaller
than what we should, so there should have no other side effect besides not
merging it.  Let's still tentatively copy stable for this, even though I
don't see anything will go wrong besides vma being split (which is mostly
not user visible).

Link: https://lkml.kernel.org/r/20230517190916.3429499-3-peterx@redhat.com
Fixes: 86039bd3 ("userfaultfd: add new syscall to provide memory externalization")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "mm/uffd: Fix vma merge/split", v2.

This series contains two patches that fix vma merge/split for userfaultfd
on two separate issues.

Patch 1 fixes a regression since 6.1+ due to something we overlooked when
converting to maple tree apis.  The plan is we use patch 1 to replace the
commit "2f628010799e (mm: userfaultfd: avoid passing an invalid range to
vma_merge())" in mm-hostfixes-unstable tree if possible, so as to bring
uffd vma operations back aligned with the rest code again.

Patch 2 fixes a long standing issue that vma can be left unmerged even if
we can for either uffd register or unregister.

Many thanks to Lorenzo on either noticing this issue from the assert
movement patch, looking at this problem, and also provided a reproducer on
the unmerged vma issue [1].

[1] https://gist.github.com/lorenzo-stoakes/a11a10f5f479e7a977fc456331266e0e


This patch (of 2):

It seems vma merging with uffd paths is broken with either
register/unregister, where right now we can feed wrong parameters to
vma_merge() and it's found by recent patch which moved asserts upwards in
vma_merge() by Lorenzo Stoakes:

https://lore.kernel.org/all/ZFunF7DmMdK05MoF@FVFF77S0Q05N.cambridge.arm.com/

It's possible that "start" is contained within vma but not clamped to its
start.  We need to convert this into either "cannot merge" case or "can
merge" case 4 which permits subdivision of prev by assigning vma to prev. 
As we loop, each subsequent VMA will be clamped to the start.

This patch will eliminate the report and make sure vma_merge() calls will
become legal again.

One thing to mention is that the "Fixes: 29417d29" below is there only
to help explain where the warning can start to trigger, the real commit to
fix should be 69dbe6da.  Commit 29417d29 helps us to identify the
issue, but unfortunately we may want to keep it in Fixes too just to ease
kernel backporters for easier tracking.

Link: https://lkml.kernel.org/r/20230517190916.3429499-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20230517190916.3429499-2-peterx@redhat.com
Fixes: 69dbe6da ("userfaultfd: use maple tree iterator to iterate VMAs")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Closes: https://lore.kernel.org/all/ZFunF7DmMdK05MoF@FVFF77S0Q05N.cambridge.arm.com/
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The xarray.c file contains the only call to radix_tree_node_rcu_free(),
and it comes with its own extern declaration for it.  This means the
function definition causes a missing-prototype warning:

lib/radix-tree.c:288:6: error: no previous prototype for 'radix_tree_node_rcu_free' [-Werror=missing-prototypes]

Instead, move the declaration for this function to a new header that can
be included by both, and do the same for the radix_tree_node_cachep
variable that has the same underlying problem but does not cause a warning
with gcc.

[zhangpeng.00@bytedance.com: fix building radix tree test suite]
  Link: https://lkml.kernel.org/r/20230521095450.21332-1-zhangpeng.00@bytedance.com
Link: https://lkml.kernel.org/r/20230516194212.548910-1-arnd@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

A syzbot fault injection test reported that nilfs_btnode_create_block, a
helper function that allocates a new node block for b-trees, causes a
kernel BUG for disk images where the file system block size is smaller
than the page size.

This was due to unexpected flags on the newly allocated buffer head, and
it turned out to be because the buffer flags were not cleared by
nilfs_btnode_abort_change_key() after an error occurred during a b-tree
update operation and the buffer was later reused in that state.

Fix this issue by using nilfs_btnode_delete() to abandon the unused
preallocated buffer in nilfs_btnode_abort_change_key().

Link: https://lkml.kernel.org/r/20230513102428.10223-1-konishi.ryusuke@gmail.comSigned-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+b0a35a5c1f7e846d3b09@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/000000000000d1d6c205ebc4d512@google.comTested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Pull tracing fixes from Steven Rostedt:
 "User events:

   - Use long instead of int for storing the enable set/clear bit, as it
     was found that big endian machines could end up using the wrong
     bits.

   - Split allocating mm and attaching it. This keeps the allocation
     separate from the registration and avoids various races.

   - Remove RCU locking around pin_user_pages_remote() as that can
     schedule. The RCU protection is no longer needed with the above
     split of mm allocation and attaching.

   - Rename the "link" fields of the various structs to something more
     meaningful.

   - Add comments around user_event_mm struct usage and locking
     requirements.

  Timerlat tracer:

   - Fix missed wakeup of timerlat thread caused by the timerlat
     interrupt triggering when tracing is off. The timer interrupt
     handler needs to always wake up the timerlat thread regardless if
     tracing is enabled or not, otherwise, it will never wake up.

  Histograms:

   - Fix regression of breaking the "stacktrace" modifier for variables.
     That modifier cannot be used for values, but can be used for
     variables that are passed from one histogram to the next. This was
     broken when adding the restriction to values as the variable logic
     used the same code.

   - Rename the special field "stacktrace" to "common_stacktrace".

     Special fields (that are not actually part of the event, but can
     act just like event fields, like 'comm' and 'timestamp') should be
     prefixed with 'common_' for consistency. To keep backward
     compatibility, 'stacktrace' can still be used (as with the special
     field 'cpu'), but can be overridden if the event has a field called
     'stacktrace'.

   - Update the synthetic event selftests to use the new name (synthetic
     events are created by histograms)

  Tracing bootup selftests:

   - Reorganize the code to keep artifacts of the selftests not compiled
     in when selftests are not configured.

   - Add various cond_resched() around the selftest code, as the
     softlock watchdog was triggering much more often. It appears that
     the kernel runs slower now with full debugging enabled.

   - While debugging ftrace with ftrace (using an instance ring buffer
     instead of the top level one), I found that the selftests were
     disabling prints to the debug instance.

     This should not happen, as the selftests only disable printing to
     the main buffer as the selftests examine the main buffer to see if
     it has what it expects, and prints can make the tests fail.

     Make the selftests only disable printing to the toplevel buffer,
     and leave the instance buffers alone"

* tag 'trace-v6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: Have function_graph selftest call cond_resched()
  tracing: Only make selftest conditionals affect the global_trace
  tracing: Make tracing_selftest_running/delete nops when not used
  tracing: Have tracer selftests call cond_resched() before running
  tracing: Move setting of tracing_selftest_running out of register_tracer()
  tracing/selftests: Update synthetic event selftest to use common_stacktrace
  tracing: Rename stacktrace field to common_stacktrace
  tracing/histograms: Allow variables to have some modifiers
  tracing/user_events: Document user_event_mm one-shot list usage
  tracing/user_events: Rename link fields for clarity
  tracing/user_events: Remove RCU lock while pinning pages
  tracing/user_events: Split up mm alloc and attach
  tracing/timerlat: Always wakeup the timerlat thread
  tracing/user_events: Use long vs int for atomic bit ops

Pull crypto fix from Herbert Xu:
 "Fix an alignment crash in x86/aria"

* tag 'v6.4-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: x86/aria - Use 16 byte alignment for GFNI constant vectors

This reverts commit 9828ed3f.

Sadly, it does seem to cause failures to load modules. Johan Hovold reports:

 "This change breaks module loading during boot on the Lenovo Thinkpad
  X13s (aarch64).

  Specifically it results in indefinite probe deferral of the display
  and USB (ethernet) which makes it a pain to debug. Typing in the dark
  to acquire some logs reveals that other modules are missing as well"

Since this was applied late as a "let's try this", I'm reverting it
asap, and we can try to figure out what goes wrong later.  The excessive
parallel module loading problem is annoying, but not noticeable in
normal situations, and this was only meant as an optimistic workaround
for a user-space bug.

One possible solution may be to do the optimistic exclusive open first,
and then use a lock to serialize loading if that fails.
Reported-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/lkml/ZHRpH-JXAxA6DnzR@hovoldconsulting.com/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When all kernel debugging is enabled (lockdep, KSAN, etc), the function
graph enabling and disabling can take several seconds to complete. The
function_graph selftest enables and disables function graph tracing
several times. With full debugging enabled, the soft lockup watchdog was
triggering because the selftest was running without ever scheduling.

Add cond_resched() throughout the test to make sure it does not trigger
the soft lockup detector.

Link: https://lkml.kernel.org/r/20230528051742.1325503-6-rostedt@goodmis.orgSigned-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The tracing_selftest_running and tracing_selftest_disabled variables were
to keep trace_printk() and other writes from affecting the tracing
selftests, as the tracing selftests would examine the ring buffer to see
if it contained what it expected or not. trace_printk() and friends could
add to the ring buffer and cause the selftests to fail (and then disable
the tracer that was being tested). To keep that from happening, these
variables were added and would keep trace_printk() and friends from
writing to the ring buffer while the tests were going on.

But this was only the top level ring buffer (owned by the global_trace
instance). There is no reason to prevent writing into ring buffers of
other instances via the trace_array_printk() and friends. For the
functions that could be used by other instances, check if the global_trace
is the tracer instance that is being written to before deciding to not
allow the write.

Link: https://lkml.kernel.org/r/20230528051742.1325503-5-rostedt@goodmis.orgSigned-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

There's no reason to test the condition variables tracing_selftest_running
or tracing_selftest_delete when tracing selftests are not enabled. Make
them define 0s when not the selftests are not configured in.

Link: https://lkml.kernel.org/r/20230528051742.1325503-4-rostedt@goodmis.orgSigned-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

As there are more and more internal selftests being added to the Linux
kernel (KSAN, lockdep, etc) the selftests are taking longer to run when
these are enabled. Add a cond_resched() to the calling of
do_run_tracer_selftest() to force a schedule if NEED_RESCHED is set,
otherwise the soft lockup watchdog may trigger on boot up.

Link: https://lkml.kernel.org/r/20230528051742.1325503-3-rostedt@goodmis.orgSigned-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The variables tracing_selftest_running and tracing_selftest_disabled are
only used for when CONFIG_FTRACE_STARTUP_TEST is enabled. Make them only
visible within the selftest code. The setting of those variables are in
the register_tracer() call, and set in a location where they do not need
to be. Create a wrapper around run_tracer_selftest() called
do_run_tracer_selftest() which sets those variables, and have
register_tracer() call that instead.

Having those variables only set within the CONFIG_FTRACE_STARTUP_TEST
scope gets rid of them (and also the ability to remove testing against
them) when the startup tests are not enabled (most cases).

Link: https://lkml.kernel.org/r/20230528051742.1325503-2-rostedt@goodmis.orgSigned-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Pull phy fixes from Vinod Koul:

 - init count imbalance fix in qcom-qmp-pcie and combo drivers

 - kernel doc header fix for qcom-snps driver

 - mediatek floating point comparison fix

 - amlogic fix register value

* tag 'phy-fixes-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: qcom-snps: correct struct qcom_snps_hsphy kerneldoc
  phy: amlogic: phy-meson-g12a-mipi-dphy-analog: fix CNTL2_DIF_TX_CTL0 value
  phy: mediatek: rework the floating point comparisons to fixed point
  phy: qcom-qmp-pcie-msm8996: fix init-count imbalance
  phy: qcom-qmp-combo: fix init-count imbalance

Pull dmaengine fixes from Vinod Koul:
 "Driver fixes for the at-hdmac, pl330, TI and IDXD drivers:

   - AT HDMAC driver fixes for Flow Controller bitfield, peripheral ID
     handling and potential NULL dereference check

   - PL330 function rename to avoid conflicts

   - build warning fix for pm function in TI driver

   - IDXD driver fix for passing freed memory"

* tag 'dmaengine-fix-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: at_hdmac: Extend the Flow Controller bitfield to three bits
  dmaengine: at_hdmac: Repair bitfield macros for peripheral ID handling
  dmaengine: pl330: rename _start to prevent build error
  dmaengine: at_xdmac: fix potential Oops in at_xdmac_prep_interleaved()
  dmaengine: ti: k3-udma: annotate pm function with __maybe_unused
  dmaengine: idxd: Fix passing freed memory in idxd_cdev_open()

Pull x86 cpu fix from Thomas Gleixner:
 "A single fix for x86:

   - Prevent a bogus setting for the number of HT siblings, which is
     caused by the CPUID evaluation trainwreck of X86. That recomputes
     the value for each CPU, so the last CPU "wins". That can cause
     completely bogus sibling values"

* tag 'x86-urgent-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/topology: Fix erroneous smp_num_siblings on Intel Hybrid platforms

Pull perf fixes from Thomas Gleixner:
 "A small set of perf fixes:

   - Make the MSR-readout based CHA discovery work around broken
     discovery tables in some SPR firmwares.

   - Prevent saving PEBS configuration which has software bits set that
     cause a crash when restored into the relevant MSR"

* tag 'perf-urgent-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/uncore: Correct the number of CHAs on SPR
  perf/x86/intel: Save/restore cpuc->active_pebs_data_cfg when using guest PEBS

Pull unwinder fixes from Thomas Gleixner:
 "A set of unwinder and tooling fixes:

   - Ensure that the stack pointer on x86 is aligned again so that the
     unwinder does not read past the end of the stack

   - Discard .note.gnu.property section which has a pointlessly
     different alignment than the other note sections. That confuses
     tooling of all sorts including readelf, libbpf and pahole"

* tag 'objtool-urgent-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/show_trace_log_lvl: Ensure stack pointer is aligned, again
  vmlinux.lds.h: Discard .note.gnu.property section

Pull debugobjects fixes from Thomas Gleixner:
 "Two fixes for debugobjects:

   - Prevent the allocation path from waking up kswapd.

     That's a long standing issue due to the GFP_ATOMIC allocation flag.
     As debug objects can be invoked from pretty much any context waking
     kswapd can end up in arbitrary lock chains versus the waitqueue
     lock

   - Correct the explicit lockdep wait-type violation in
     debug_object_fill_pool()"

* tag 'core-debugobjects-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  debugobjects: Don't wake up kswapd from fill_pool()
  debugobjects,locking: Annotate debug_object_fill_pool() wait type violation

Pull irq fixes from Thomas Gleixner:
 "A set of fixes for interrupt chip drivers:

   - Prevent loss of state in the MIPS GIC interrupt controller

   - Disable pseudo NMIs on Mediatek based Chromebooks as they have
     firmware issues which cause instantenous chrashes and freezes wen
     pseudo NMIs are used

   - Fix the error handling path in the MBIGEN driver and a defined but
     not used warning in the meson-gpio interrupt chip driver"

* tag 'irq-urgent-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/mbigen: Unify the error handling in mbigen_of_create_domain()
  irqchip/meson-gpio: Mark OF related data as maybe unused
  irqchip/mips-gic: Use raw spinlock for gic_lock
  irqchip/mips-gic: Don't touch vl_map if a local interrupt is not routable
  irqchip/gic-v3: Disable pseudo NMIs on Mediatek devices w/ firmware issues
  dt-bindings: interrupt-controller: arm,gic-v3: Add quirk for Mediatek SoCs w/ broken FW

Pull MIPS fixes from Thomas Bogendoerfer:

 - fixes to get alchemy platform back in shape

 - fix for initrd detection

* tag 'mips-fixes_6.4_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  mips: Move initrd_start check after initrd address sanitisation.
  MIPS: Alchemy: fix dbdma2
  MIPS: Restore Au1300 support
  MIPS: unhide PATA_PLATFORM

Pull powerpc fix from Michael Ellerman:

 - Reinstate ARCH_FORCE_MAX_ORDER ranges to fix various breakage

* tag 'powerpc-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm: Reinstate ARCH_FORCE_MAX_ORDER ranges

Pull xen fixes from Juergen Gross:

 - a double free fix in the Xen pvcalls backend driver

 - a fix for a regression causing the MSI related sysfs entries to not
   being created in Xen PV guests

 - a fix in the Xen blkfront driver for handling insane input data
   better

* tag 'for-linus-6.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  x86/pci/xen: populate MSI sysfs entries
  xen/pvcalls-back: fix double frees with pvcalls_new_active_socket()
  xen/blkfront: Only check REQ_FUA for writes

Pull char/misc fixes from Greg KH:
 "Here are some small driver fixes for 6.4-rc4. They are just two
  different types:

   - binder fixes and reverts for reported problems and regressions in
     the binder "driver".

   - coresight driver fixes for reported problems.

  All of these have been in linux-next for over a week with no reported
  problems"

* tag 'char-misc-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  binder: fix UAF of alloc->vma in race with munmap()
  binder: add lockless binder_alloc_(set|get)_vma()
  Revert "android: binder: stop saving a pointer to the VMA"
  Revert "binder_alloc: add missing mmap_lock calls when using the VMA"
  binder: fix UAF caused by faulty buffer cleanup
  coresight: perf: Release Coresight path when alloc trace id failed
  coresight: Fix signedness bug in tmc_etr_buf_insert_barrier_packet()

Pull compute express link fixes from Dan Williams:
 "The 'media ready' series prevents the driver from acting on bad
  capacity information, and it moves some checks earlier in the init
  sequence which impacts topics in the queue for 6.5.

  Additional hotplug testing uncovered a missing enable for memory
  decode. A debug crash fix is also included.

  Summary:

   - Stop trusting capacity data before the "media ready" indication

   - Add missing HDM decoder capability enable for the cold-plug case

   - Fix a debug message induced crash"

* tag 'cxl-fixes-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl: Explicitly initialize resources when media is not ready
  cxl/port: Fix NULL pointer access in devm_cxl_add_port()
  cxl: Move cxl_await_media_ready() to before capacity info retrieval
  cxl: Wait Memory_Info_Valid before access memory related info
  cxl/port: Enable the HDM decoder capability for switch ports

Pull ARM SoC fixes from Arnd Bergmann:
 "There have not been a lot of fixes for for the soc tree in 6.4, but
  these have been sitting here for too long.

  For the devicetree side, there is one minor warning fix for vexpress,
  the rest all all for the the NXP i.MX platforms: SoC specific bugfixes
  for the iMX8 clocks and its USB-3.0 gadget device, as well as board
  specific fixes for regulators and the phy on some of the i.MX boards.

  The microchip risc-v and arm32 maintainers now also add a shared
  maintainer file entry for the arm64 parts.

  The remaining fixes are all for firmware drivers, addressing mistakes
  in the optee, scmi and ff-a firmware driver implementation, mostly in
  the error handling code, incorrect use of the alloc_workqueue()
  interface in SCMI, and compatibility with corner cases of the firmware
  implementation"

* tag 'arm-fixes-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  MAINTAINERS: update arm64 Microchip entries
  arm64: dts: imx8: fix USB 3.0 Gadget Failure in QM & QXPB0 at super speed
  dt-binding: cdns,usb3: Fix cdns,on-chip-buff-size type
  arm64: dts: colibri-imx8x: delete adc1 and dsp
  arm64: dts: colibri-imx8x: fix iris pinctrl configuration
  arm64: dts: colibri-imx8x: move pinctrl property from SoM to eval board
  arm64: dts: colibri-imx8x: fix eval board pin configuration
  arm64: dts: imx8mp: Fix video clock parents
  ARM: dts: imx6qdl-mba6: Add missing pvcie-supply regulator
  ARM: dts: imx6ull-dhcor: Set and limit the mode for PMIC buck 1, 2 and 3
  arm64: dts: imx8mn-var-som: fix PHY detection bug by adding deassert delay
  arm64: dts: imx8mn: Fix video clock parents
  firmware: arm_ffa: Set reserved/MBZ fields to zero in the memory descriptors
  firmware: arm_ffa: Fix FFA device names for logical partitions
  firmware: arm_ffa: Fix usage of partition info get count flag
  firmware: arm_ffa: Check if ffa_driver remove is present before executing
  arm64: dts: arm: add missing cache properties
  ARM: dts: vexpress: add missing cache properties
  firmware: arm_scmi: Fix incorrect alloc_workqueue() invocation
  optee: fix uninited async notif value

Pull PCI fix from Bjorn Helgaas:

 - Quirk Ice Lake Root Ports to work around DPC log size issue (Mika
   Westerberg)

* tag 'pci-v6.4-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  PCI/DPC: Quirk PIO log size for Intel Ice Lake Root Ports

Pull VFIO fix from Alex Williamson:

 - Test for and return error for invalid pfns through the pin pages
   interface (Yan Zhao)

* tag 'vfio-v6.4-rc4' of https://github.com/awilliam/linux-vfio:
  vfio/type1: check pfn valid before converting to struct page

Pull block fixes from Jens Axboe:
 "A few fixes for the storage side of things:

   - Fix bio caching condition for passthrough IO (Anuj)

   - end-of-device check fix for zero sized devices (Christoph)

   - Update Paolo's email address

   - NVMe pull request via Keith with a single quirk addition

   - Fix regression in how wbt enablement is done (Yu)

   - Fix race in active queue accounting (Tian)"

* tag 'block-6.4-2023-05-26' of git://git.kernel.dk/linux:
  NVMe: Add MAXIO 1602 to bogus nid list.
  block: make bio_check_eod work for zero sized devices
  block: fix bio-cache for passthru IO
  block, bfq: update Paolo's address in maintainer list
  blk-mq: fix race condition in active queue accounting
  blk-wbt: fix that wbt can't be disabled by default

Pull io_uring fix from Jens Axboe:
 "Just a single fix for the conditional schedule with the SQPOLL thread,
  dropping the uring_lock if we do need to reschedule"

* tag 'io_uring-6.4-2023-05-26' of git://git.kernel.dk/linux:
  io_uring: unlock sqd->lock before sq thread release CPU

Pull thermal control fix from Rafael Wysocki:
 "Fix a regression introduced inadvertently during the 6.3 cycle by a
  commit making the Intel int340x thermal driver use sysfs_emit_at()
  instead of scnprintf() (Srinivas Pandruvada)"

* tag 'thermal-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: intel: int340x: Add new line for UUID display

Pull power management fixes from Rafael Wysocki:
 "Fix three issues related to the ->fast_switch callback in the AMD
  P-state cpufreq driver (Gautham R. Shenoy and Wyes Karny)"

* tag 'pm-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: amd-pstate: Update policy->cur in amd_pstate_adjust_perf()
  cpufreq: amd-pstate: Remove fast_switch_possible flag from active driver
  cpufreq: amd-pstate: Add ->fast_switch() callback

When media is not ready do not assume that the capacity information from
the identify command is valid, i.e. ->total_bytes
->partition_align_bytes ->{volatile,persistent}_only_bytes. Explicitly
zero out the capacity resources and exit early.

Given zero-init of those fields this patch is functionally equivalent to
the prior state, but it improves readability and robustness going
forward.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168506118166.3004974.13523455340007852589.stgit@djiang5-mobl3Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Pull gpio fixes from Bartosz Golaszewski:

 - fix incorrect output in in-tree gpio tools

 - fix a shell coding issue in gpio-sim selftests

 - correctly set the permissions for debugfs attributes exposed by
   gpio-mockup

 - fix chip name and pin count in gpio-f7188x for one of the supported
   models

 - fix numberspace pollution when using dynamically and statically
   allocated GPIOs together

* tag 'gpio-fixes-for-v6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio-f7188x: fix chip name and pin count on Nuvoton chip
  gpiolib: fix allocation of mixed dynamic/static GPIOs
  gpio: mockup: Fix mode of debugfs files
  selftests: gpio: gpio-sim: Fix BUG: test FAILED due to recent change
  tools: gpio: fix debounce_period_us output of lsgpio