- 20 Jul, 2023 5 commits
-
-
Daniel Golle authored
entries and bind debugfs files would display wrong data on NETSYS_V2 and later because instead of using mtk_get_ib1_pkt_type the driver would use MTK_FOE_IB1_PACKET_TYPE which corresponds to NETSYS_V1(.x) SoCs. Use mtk_get_ib1_pkt_type so entries and bind records display correctly. Fixes: 03a3180e ("net: ethernet: mtk_eth_soc: introduce flow offloading support for mt7986") Signed-off-by:
Daniel Golle <daniel@makrotopia.org> Acked-by:
Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/c0ae03d0182f4d27b874cbdf0059bc972c317f3c.1689727134.git.daniel@makrotopia.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Heiner Kallweit says: ==================== r8169: revert two changes that caused regressions This reverts two changes that caused regressions. ==================== Link: https://lore.kernel.org/r/ddadceae-19c9-81b8-47b5-a4ff85e2563a@gmail.comSigned-off-by:
-
Heiner Kallweit authored
This reverts commit e1ed3e4d. Turned out the change causes a performance regression. Link: https://lore.kernel.org/netdev/20230713124914.GA12924@green245/T/ Cc: stable@vger.kernel.org Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/055c6bc2-74fa-8c67-9897-3f658abb5ae7@gmail.comSigned-off-by:
-
Heiner Kallweit authored
r8169: revert 2ab19de6 ("r8169: remove ASPM restrictions now that ASPM is disabled during NAPI poll") There have been reports that on a number of systems this change breaks network connectivity. Therefore effectively revert it. Mainly affected seem to be systems where BIOS denies ASPM access to OS. Due to later changes we can't do a direct revert. Fixes: 2ab19de6 ("r8169: remove ASPM restrictions now that ASPM is disabled during NAPI poll") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/netdev/e47bac0d-e802-65e1-b311-6acb26d5cf10@freenet.de/T/ Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217596Signed-off-by:
-
Kuniyuki Iwashima authored
This reverts commit 3f4ca5fa. Commit 3f4ca5fa ("tcp: avoid the lookup process failing to get sk in ehash table") reversed the order in how a socket is inserted into ehash to fix an issue that ehash-lookup could fail when reqsk/full sk/twsk are swapped. However, it introduced another lookup failure. The full socket in ehash is allocated from a slab with SLAB_TYPESAFE_BY_RCU and does not have SOCK_RCU_FREE, so the socket could be reused even while it is being referenced on another CPU doing RCU lookup. Let's say a socket is reused and inserted into the same hash bucket during lookup. After the blamed commit, a new socket is inserted at the end of the list. If that happens, we will skip sockets placed after the previous position of the reused socket, resulting in ehash lookup failure. As described in Documentation/RCU/rculist_nulls.rst, we should insert a new socket at the head of the list to avoid such an issue. This issue, the swap-lookup-failure, and another variant reported in [0] can all be handled properly by adding a locked ehash lookup suggested by Eric Dumazet [1]. However, this issue could occur for every packet, thus more likely than the other two races, so let's revert the change for now. Link: https://lore.kernel.org/netdev/20230606064306.9192-1-duanmuquan@baidu.com/ [0] Link: https://lore.kernel.org/netdev/CANn89iK8snOz8TYOhhwfimC7ykYA78GA3Nyv8x06SZYa1nKdyA@mail.gmail.com/ [1] Fixes: 3f4ca5fa ("tcp: avoid the lookup process failing to get sk in ehash table") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230717215918.15723-1-kuniyu@amazon.comSigned-off-by:
-
- 19 Jul, 2023 16 commits
-
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Alexei Starovoitov says: ==================== pull-request: bpf 2023-07-19 We've added 4 non-merge commits during the last 1 day(s) which contain a total of 3 files changed, 55 insertions(+), 10 deletions(-). The main changes are: 1) Fix stack depth check in presence of async callbacks, from Kumar Kartikeya Dwivedi. 2) Fix BTI type used for freplace attached functions, from Alexander Duyck. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf, arm64: Fix BTI type used for freplace attached functions selftests/bpf: Add more tests for check_max_stack_depth bug bpf: Repeat check_max_stack_depth for async callbacks bpf: Fix subprog idx logic in check_max_stack_depth ==================== Link: https://lore.kernel.org/r/20230719174502.74023-1-alexei.starovoitov@gmail.comSigned-off-by:
-
Yuanjun Gong authored
goto free_skb if an unexpected result is returned by pskb_tirm() in erspan_xmit(). Signed-off-by:
Yuanjun Gong <ruc_gongyuanjun@163.com> Reviewed-by:
David S. Miller <davem@davemloft.net>
-
Yuanjun Gong authored
goto err_free_skb if an unexpected result is returned by pskb_tirm() in erspan_fb_xmit(). Signed-off-by:
-
Yuanjun Gong authored
ocelot_fdma_receive_skb should return false if an unexpected value is returned by pskb_trim. Signed-off-by:
-
Yuanjun Gong authored
in emac_tso_csum(), return an error code if an unexpected value is returned by pskb_trim(). Signed-off-by:
-
Yuanjun Gong authored
goto tx_err if an unexpected result is returned by pskb_tirm() in ip6erspan_tunnel_xmit(). Fixes: 5a963eb6 ("ip6_gre: Add ERSPAN native tunnel support") Signed-off-by:
David Ahern <dsahern@kernel.org> Reviewed-by:
-
Wang Ming authored
key might contain private part of the key, so better use kfree_sensitive to free it. Fixes: 38320c70 ("[IPSEC]: Use crypto_aead and authenc in ESP") Signed-off-by:
Wang Ming <machel@vivo.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-07-17 (iavf) This series contains updates to iavf driver only. Ding Hui fixes use-after-free issue by calling netif_napi_del() for all allocated q_vectors. He also resolves out-of-bounds issue by not updating to new values when timeout is encountered. Marcin and Ahmed change the way resets are handled so that the callback operating under the RTNL lock will wait for the reset to finish, the rtnl_lock sensitive functions in reset flow will schedule the netdev update for later in order to remove circular dependency with the critical lock. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf: fix reset task race with iavf_remove() iavf: fix a deadlock caused by rtnl and driver's lock circular dependencies Revert "iavf: Do not restart Tx queues after reset task failure" Revert "iavf: Detach device during reset task" iavf: Wait for reset in callbacks which trigger it iavf: use internal state to free traffic IRQs iavf: Fix out-of-bounds when setting channels on remove iavf: Fix use-after-free in free_netdev ==================== Link: https://lore.kernel.org/r/20230717175205.3217774-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Jakub Kicinski authored
Eric Dumazet says: ==================== tcp: annotate data-races in tcp_rsk(req) Small series addressing two syzbot reports around tcp_rsk(req) ==================== Link: https://lore.kernel.org/r/20230717144445.653164-1-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
TCP request sockets are lockless, tcp_rsk(req)->ts_recent can change while being read by another cpu as syzbot noticed. This is harmless, but we should annotate the known races. Note that tcp_check_req() changes req->ts_recent a bit early, we might change this in the future. BUG: KCSAN: data-race in tcp_check_req / tcp_check_req write to 0xffff88813c8afb84 of 4 bytes by interrupt on cpu 1: tcp_check_req+0x694/0xc70 net/ipv4/tcp_minisocks.c:762 tcp_v4_rcv+0x12db/0x1b70 net/ipv4/tcp_ipv4.c:2071 ip_protocol_deliver_rcu+0x356/0x6d0 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x13c/0x1a0 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:303 [inline] ip_local_deliver+0xec/0x1c0 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:468 [inline] ip_rcv_finish net/ipv4/ip_input.c:449 [inline] NF_HOOK include/linux/netfilter.h:303 [inline] ip_rcv+0x197/0x270 net/ipv4/ip_input.c:569 __netif_receive_skb_one_core net/core/dev.c:5493 [inline] __netif_receive_skb+0x90/0x1b0 net/core/dev.c:5607 process_backlog+0x21f/0x380 net/core/dev.c:5935 __napi_poll+0x60/0x3b0 net/core/dev.c:6498 napi_poll net/core/dev.c:6565 [inline] net_rx_action+0x32b/0x750 net/core/dev.c:6698 __do_softirq+0xc1/0x265 kernel/softirq.c:571 do_softirq+0x7e/0xb0 kernel/softirq.c:472 __local_bh_enable_ip+0x64/0x70 kernel/softirq.c:396 local_bh_enable+0x1f/0x20 include/linux/bottom_half.h:33 rcu_read_unlock_bh include/linux/rcupdate.h:843 [inline] __dev_queue_xmit+0xabb/0x1d10 net/core/dev.c:4271 dev_queue_xmit include/linux/netdevice.h:3088 [inline] neigh_hh_output include/net/neighbour.h:528 [inline] neigh_output include/net/neighbour.h:542 [inline] ip_finish_output2+0x700/0x840 net/ipv4/ip_output.c:229 ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:317 NF_HOOK_COND include/linux/netfilter.h:292 [inline] ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:431 dst_output include/net/dst.h:458 [inline] ip_local_out net/ipv4/ip_output.c:126 [inline] __ip_queue_xmit+0xa4d/0xa70 net/ipv4/ip_output.c:533 ip_queue_xmit+0x38/0x40 net/ipv4/ip_output.c:547 __tcp_transmit_skb+0x1194/0x16e0 net/ipv4/tcp_output.c:1399 tcp_transmit_skb net/ipv4/tcp_output.c:1417 [inline] tcp_write_xmit+0x13ff/0x2fd0 net/ipv4/tcp_output.c:2693 __tcp_push_pending_frames+0x6a/0x1a0 net/ipv4/tcp_output.c:2877 tcp_push_pending_frames include/net/tcp.h:1952 [inline] __tcp_sock_set_cork net/ipv4/tcp.c:3336 [inline] tcp_sock_set_cork+0xe8/0x100 net/ipv4/tcp.c:3343 rds_tcp_xmit_path_complete+0x3b/0x40 net/rds/tcp_send.c:52 rds_send_xmit+0xf8d/0x1420 net/rds/send.c:422 rds_send_worker+0x42/0x1d0 net/rds/threads.c:200 process_one_work+0x3e6/0x750 kernel/workqueue.c:2408 worker_thread+0x5f2/0xa10 kernel/workqueue.c:2555 kthread+0x1d7/0x210 kernel/kthread.c:379 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 read to 0xffff88813c8afb84 of 4 bytes by interrupt on cpu 0: tcp_check_req+0x32a/0xc70 net/ipv4/tcp_minisocks.c:622 tcp_v4_rcv+0x12db/0x1b70 net/ipv4/tcp_ipv4.c:2071 ip_protocol_deliver_rcu+0x356/0x6d0 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x13c/0x1a0 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:303 [inline] ip_local_deliver+0xec/0x1c0 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:468 [inline] ip_rcv_finish net/ipv4/ip_input.c:449 [inline] NF_HOOK include/linux/netfilter.h:303 [inline] ip_rcv+0x197/0x270 net/ipv4/ip_input.c:569 __netif_receive_skb_one_core net/core/dev.c:5493 [inline] __netif_receive_skb+0x90/0x1b0 net/core/dev.c:5607 process_backlog+0x21f/0x380 net/core/dev.c:5935 __napi_poll+0x60/0x3b0 net/core/dev.c:6498 napi_poll net/core/dev.c:6565 [inline] net_rx_action+0x32b/0x750 net/core/dev.c:6698 __do_softirq+0xc1/0x265 kernel/softirq.c:571 run_ksoftirqd+0x17/0x20 kernel/softirq.c:939 smpboot_thread_fn+0x30a/0x4a0 kernel/smpboot.c:164 kthread+0x1d7/0x210 kernel/kthread.c:379 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 value changed: 0x1cd237f1 -> 0x1cd237f2 Fixes: 079096f1 ("tcp/dccp: install syn_recv requests into ehash table") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Reviewed-by:
-
Eric Dumazet authored
TCP request sockets are lockless, some of their fields can change while being read by another cpu as syzbot noticed. This is usually harmless, but we should annotate the known races. This patch takes care of tcp_rsk(req)->txhash, a separate one is needed for tcp_rsk(req)->ts_recent. BUG: KCSAN: data-race in tcp_make_synack / tcp_rtx_synack write to 0xffff8881362304bc of 4 bytes by task 32083 on cpu 1: tcp_rtx_synack+0x9d/0x2a0 net/ipv4/tcp_output.c:4213 inet_rtx_syn_ack+0x38/0x80 net/ipv4/inet_connection_sock.c:880 tcp_check_req+0x379/0xc70 net/ipv4/tcp_minisocks.c:665 tcp_v6_rcv+0x125b/0x1b20 net/ipv6/tcp_ipv6.c:1673 ip6_protocol_deliver_rcu+0x92f/0xf30 net/ipv6/ip6_input.c:437 ip6_input_finish net/ipv6/ip6_input.c:482 [inline] NF_HOOK include/linux/netfilter.h:303 [inline] ip6_input+0xbd/0x1b0 net/ipv6/ip6_input.c:491 dst_input include/net/dst.h:468 [inline] ip6_rcv_finish+0x1e2/0x2e0 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:303 [inline] ipv6_rcv+0x74/0x150 net/ipv6/ip6_input.c:309 __netif_receive_skb_one_core net/core/dev.c:5452 [inline] __netif_receive_skb+0x90/0x1b0 net/core/dev.c:5566 netif_receive_skb_internal net/core/dev.c:5652 [inline] netif_receive_skb+0x4a/0x310 net/core/dev.c:5711 tun_rx_batched+0x3bf/0x400 tun_get_user+0x1d24/0x22b0 drivers/net/tun.c:1997 tun_chr_write_iter+0x18e/0x240 drivers/net/tun.c:2043 call_write_iter include/linux/fs.h:1871 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x4ab/0x7d0 fs/read_write.c:584 ksys_write+0xeb/0x1a0 fs/read_write.c:637 __do_sys_write fs/read_write.c:649 [inline] __se_sys_write fs/read_write.c:646 [inline] __x64_sys_write+0x42/0x50 fs/read_write.c:646 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffff8881362304bc of 4 bytes by task 32078 on cpu 0: tcp_make_synack+0x367/0xb40 net/ipv4/tcp_output.c:3663 tcp_v6_send_synack+0x72/0x420 net/ipv6/tcp_ipv6.c:544 tcp_conn_request+0x11a8/0x1560 net/ipv4/tcp_input.c:7059 tcp_v6_conn_request+0x13f/0x180 net/ipv6/tcp_ipv6.c:1175 tcp_rcv_state_process+0x156/0x1de0 net/ipv4/tcp_input.c:6494 tcp_v6_do_rcv+0x98a/0xb70 net/ipv6/tcp_ipv6.c:1509 tcp_v6_rcv+0x17b8/0x1b20 net/ipv6/tcp_ipv6.c:1735 ip6_protocol_deliver_rcu+0x92f/0xf30 net/ipv6/ip6_input.c:437 ip6_input_finish net/ipv6/ip6_input.c:482 [inline] NF_HOOK include/linux/netfilter.h:303 [inline] ip6_input+0xbd/0x1b0 net/ipv6/ip6_input.c:491 dst_input include/net/dst.h:468 [inline] ip6_rcv_finish+0x1e2/0x2e0 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:303 [inline] ipv6_rcv+0x74/0x150 net/ipv6/ip6_input.c:309 __netif_receive_skb_one_core net/core/dev.c:5452 [inline] __netif_receive_skb+0x90/0x1b0 net/core/dev.c:5566 netif_receive_skb_internal net/core/dev.c:5652 [inline] netif_receive_skb+0x4a/0x310 net/core/dev.c:5711 tun_rx_batched+0x3bf/0x400 tun_get_user+0x1d24/0x22b0 drivers/net/tun.c:1997 tun_chr_write_iter+0x18e/0x240 drivers/net/tun.c:2043 call_write_iter include/linux/fs.h:1871 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x4ab/0x7d0 fs/read_write.c:584 ksys_write+0xeb/0x1a0 fs/read_write.c:637 __do_sys_write fs/read_write.c:649 [inline] __se_sys_write fs/read_write.c:646 [inline] __x64_sys_write+0x42/0x50 fs/read_write.c:646 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x91d25731 -> 0xe79325cd Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 32078 Comm: syz-executor.4 Not tainted 6.5.0-rc1-syzkaller-00033-geb26cbb1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023 Fixes: 58d607d3 ("tcp: provide skb->hash to synack packets") Signed-off-by:
-
Subbaraya Sundeep authored
Hardware generated encryption and ICV tags are found to be wrong when tested with IEEE MACSEC test vectors. This is because as per the HRM, the hash key (derived by AES-ECB block encryption of an all 0s block with the SAK) has to be programmed by the software in MCSX_RS_MCS_CPM_TX_SLAVE_SA_PLCY_MEM_4X register. Hence fix this by generating hash key in software and configuring in hardware. Fixes: c54ffc73 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by:
Subbaraya Sundeep <sbhatta@marvell.com> Reviewed-by:
Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://lore.kernel.org/r/1689574603-28093-1-git-send-email-sbhatta@marvell.comSigned-off-by:
-
Florian Kauer authored
In normal operation, each populated queue item has next_to_watch pointing to the last TX desc of the packet, while each cleaned item has it set to 0. In particular, next_to_use that points to the next (necessarily clean) item to use has next_to_watch set to 0. When the TX queue is used both by an application using AF_XDP with ZEROCOPY as well as a second non-XDP application generating high traffic, the queue pointers can get in an invalid state where next_to_use points to an item where next_to_watch is NOT set to 0. However, the implementation assumes at several places that this is never the case, so if it does hold, bad things happen. In particular, within the loop inside of igc_clean_tx_irq(), next_to_clean can overtake next_to_use. Finally, this prevents any further transmission via this queue and it never gets unblocked or signaled. Secondly, if the queue is in this garbled state, the inner loop of igc_clean_tx_ring() will never terminate, completely hogging a CPU core. The reason is that igc_xdp_xmit_zc() reads next_to_use before acquiring the lock, and writing it back (potentially unmodified) later. If it got modified before locking, the outdated next_to_use is written pointing to an item that was already used elsewhere (and thus next_to_watch got written). Fixes: 9acf59a7 ("igc: Enable TX via AF_XDP zero-copy") Signed-off-by:
Florian Kauer <florian.kauer@linutronix.de> Reviewed-by:
Kurt Kanzenbach <kurt@linutronix.de> Tested-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Tested-by:
Naama Meir <naamax.meir@linux.intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230717175444.3217831-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Jakub Kicinski authored
Merge tag 'linux-can-fixes-for-6.5-20230717' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2023-07-17 The 1st patch is by Ziyang Xuan and fixes a possible memory leak in the receiver handling in the CAN RAW protocol. YueHaibing contributes a use after free in bcm_proc_show() of the Broad Cast Manager (BCM) CAN protocol. The next 2 patches are by me and fix a possible null pointer dereference in the RX path of the gs_usb driver with activated hardware timestamps and the candlelight firmware. The last patch is by Fedor Ross, Marek Vasut and me and targets the mcp251xfd driver. The polling timeout of __mcp251xfd_chip_set_mode() is increased to fix bus joining on busy CAN buses and very low bit rate. * tag 'linux-can-fixes-for-6.5-20230717' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: mcp251xfd: __mcp251xfd_chip_set_mode(): increase poll timeout can: gs_usb: fix time stamp counter initialization can: gs_usb: gs_can_open(): improve error handling can: bcm: Fix UAF in bcm_proc_show() can: raw: fix receiver memory leak ==================== Link: https://lore.kernel.org/r/20230717180938.230816-1-mkl@pengutronix.deSigned-off-by:
-
John Fastabend authored
Fix old email to avoid bouncing email from net/drivers and older netdev work. Anyways my @intel email hasn't been active for years. Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20230717173306.38407-1-john.fastabend@gmail.comSigned-off-by:
-
Shannon Nelson authored
Update old emails for my current work email. Signed-off-by:
Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20230717193242.43670-1-shannon.nelson@amd.comSigned-off-by:
-
- 18 Jul, 2023 12 commits
-
-
Jakub Kicinski authored
Matthieu Baerts says: ==================== selftests: tc: increase timeout and add missing kconfig When looking for something else in LKFT reports [1], I noticed that the TC selftest ended with a timeout error: not ok 1 selftests: tc-testing: tdc.sh # TIMEOUT 45 seconds I also noticed most of the tests were skipped because the "teardown stage" did not complete successfully. It was due to missing kconfig. These patches fix these two errors plus an extra one because this selftest reads info from "/proc/net/nf_conntrack". Thank you Pedro for having helped me fixing these issues [2]. Link: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230711/testrun/18267241/suite/kselftest-tc-testing/test/tc-testing_tdc_sh/log [1] Link: https://lore.kernel.org/netdev/0e061d4a-9a23-9f58-3b35-d8919de332d7@tessares.net/T/ [2] ==================== Link: https://lore.kernel.org/r/20230713-tc-selftests-lkft-v1-0-1eb4fd3a96e7@tessares.netSigned-off-by:
-
Matthieu Baerts authored
When looking at the TC selftest reports, I noticed one test was failing because /proc/net/nf_conntrack was not available. not ok 373 3992 - Add ct action triggering DNAT tuple conflict Could not match regex pattern. Verify command output: cat: /proc/net/nf_conntrack: No such file or directory It is only available if NF_CONNTRACK_PROCFS kconfig is set. So the issue can be fixed simply by adding it to the list of required kconfig. Fixes: e4690564 ("tc-testing: add test for ct DNAT tuple collision") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/netdev/0e061d4a-9a23-9f58-3b35-d8919de332d7@tessares.net/T/ [1] Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Tested-by:
Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20230713-tc-selftests-lkft-v1-3-1eb4fd3a96e7@tessares.netAcked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Matthieu Baerts authored
When looking for something else in LKFT reports [1], I noticed most of the tests were skipped because the "teardown stage" did not complete successfully. Pedro found out this is due to the fact CONFIG_NF_FLOW_TABLE is required but not listed in the 'config' file. Adding it to the list fixes the issues on LKFT side. CONFIG_NET_ACT_CT is now set to 'm' in the final kconfig. Fixes: c34b961a ("net/sched: act_ct: Create nf flow table per zone") Cc: stable@vger.kernel.org Link: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230711/testrun/18267241/suite/kselftest-tc-testing/test/tc-testing_tdc_sh/log [1] Link: https://lore.kernel.org/netdev/0e061d4a-9a23-9f58-3b35-d8919de332d7@tessares.net/T/ [2] Suggested-by:
Pedro Tammela <pctammela@mojatatu.com> Signed-off-by:
-
Matthieu Baerts authored
When looking for something else in LKFT reports [1], I noticed that the TC selftest ended with a timeout error: not ok 1 selftests: tc-testing: tdc.sh # TIMEOUT 45 seconds The timeout had been introduced 3 years ago, see the Fixes commit below. This timeout is only in place when executing the selftests via the kselftests runner scripts. I guess this is not what most TC devs are using and nobody noticed the issue before. The new timeout is set to 15 minutes as suggested by Pedro [2]. It looks like it is plenty more time than what it takes in "normal" conditions. Fixes: 852c8cbf ("selftests/kselftest/runner.sh: Add 45 second timeout per test") Cc: stable@vger.kernel.org Link: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230711/testrun/18267241/suite/kselftest-tc-testing/test/tc-testing_tdc_sh/log [1] Link: https://lore.kernel.org/netdev/0e061d4a-9a23-9f58-3b35-d8919de332d7@tessares.net/T/ [2] Suggested-by:
-
Alexander Duyck authored
When running an freplace attached bpf program on an arm64 system w were seeing the following issue: Unhandled 64-bit el1h sync exception on CPU47, ESR 0x0000000036000003 -- BTI After a bit of work to track it down I determined that what appeared to be happening is that the 'bti c' at the start of the program was somehow being reached after a 'br' instruction. Further digging pointed me toward the fact that the function was attached via freplace. This in turn led me to build_plt which I believe is invoking the long jump which is triggering this error. To resolve it we can replace the 'bti c' with 'bti jc' and add a comment explaining why this has to be modified as such. Fixes: b2ad54e1 ("bpf, arm64: Implement bpf_arch_text_poke() for arm64") Signed-off-by:
Alexander Duyck <alexanderduyck@fb.com> Acked-by:
Xu Kuohai <xukuohai@huawei.com> Link: https://lore.kernel.org/r/168926677665.316237.9953845318337455525.stgit@ahduyck-xeon-server.home.arpaSigned-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Alexei Starovoitov authored
Kumar Kartikeya Dwivedi says: ==================== Two more fixes for check_max_stack_depth I noticed two more bugs while reviewing the code, description and examples available in the patches. One leads to incorrect subprog index to be stored in the frame stack maintained by the function (leading to incorrect tail_call_reachable marks, among other things). The other problem is missing exploration pass of other async callbacks when they are not called from the main prog. Call chains rooted at them can thus bypass the stack limits (32 call frames * max permitted stack depth per function). Changelog: ---------- v1 -> v2 v1: https://lore.kernel.org/bpf/20230713003118.1327943-1-memxor@gmail.com * Fix commit message for patch 2 (Alexei) ==================== Link: https://lore.kernel.org/r/20230717161530.1238-1-memxor@gmail.comSigned-off-by:
-
Kumar Kartikeya Dwivedi authored
Another test which now exercies the path of the verifier where it will explore call chains rooted at the async callback. Without the prior fixes, this program loads successfully, which is incorrect. Signed-off-by:
Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20230717161530.1238-4-memxor@gmail.comSigned-off-by:
-
Kumar Kartikeya Dwivedi authored
While the check_max_stack_depth function explores call chains emanating from the main prog, which is typically enough to cover all possible call chains, it doesn't explore those rooted at async callbacks unless the async callback will have been directly called, since unlike non-async callbacks it skips their instruction exploration as they don't contribute to stack depth. It could be the case that the async callback leads to a callchain which exceeds the stack depth, but this is never reachable while only exploring the entry point from main subprog. Hence, repeat the check for the main subprog *and* all async callbacks marked by the symbolic execution pass of the verifier, as execution of the program may begin at any of them. Consider functions with following stack depths: main: 256 async: 256 foo: 256 main: rX = async bpf_timer_set_callback(...) async: foo() Here, async is not descended as it does not contribute to stack depth of main (since it is referenced using bpf_pseudo_func and not bpf_pseudo_call). However, when async is invoked asynchronously, it will end up breaching the MAX_BPF_STACK limit by calling foo. Hence, in addition to main, we also need to explore call chains beginning at all async callback subprogs in a program. Fixes: 7ddc80a4 ("bpf: Teach stack depth check about async callbacks.") Signed-off-by: -
Kumar Kartikeya Dwivedi authored
The assignment to idx in check_max_stack_depth happens once we see a bpf_pseudo_call or bpf_pseudo_func. This is not an issue as the rest of the code performs a few checks and then pushes the frame to the frame stack, except the case of async callbacks. If the async callback case causes the loop iteration to be skipped, the idx assignment will be incorrect on the next iteration of the loop. The value stored in the frame stack (as the subprogno of the current subprog) will be incorrect. This leads to incorrect checks and incorrect tail_call_reachable marking. Save the target subprog in a new variable and only assign to idx once we are done with the is_async_cb check which may skip pushing of frame to the frame stack and subsequent stack depth checks and tail call markings. Fixes: 7ddc80a4 ("bpf: Teach stack depth check about async callbacks.") Signed-off-by:
-
Geetha sowjanya authored
Current driver enables backpressure for LBK interfaces. But these interfaces do not support this feature. Hence, this patch fixes the issue by skipping the backpressure configuration for these interfaces. Fixes: 75f36270 ("octeontx2-pf: Support to enable/disable pause frames via ethtool"). Signed-off-by:
Geetha sowjanya <gakula@marvell.com> Signed-off-by:
Sunil Goutham <sgoutham@marvell.com> Link: https://lore.kernel.org/r/20230716093741.28063-1-gakula@marvell.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Ido Schimmel authored
Cited commit converted the neighbour code to use the standard RCU variant instead of the RCU-bh variant, but the VRF code still uses rcu_read_lock_bh() / rcu_read_unlock_bh() around the neighbour lookup code in its IPv4 and IPv6 output paths, resulting in lockdep splats [1][2]. Can be reproduced using [3]. Fix by switching to rcu_read_lock() / rcu_read_unlock(). [1] ============================= WARNING: suspicious RCU usage 6.5.0-rc1-custom-g9c099e6dbf98 #403 Not tainted ----------------------------- include/net/neighbour.h:302 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by ping/183: #0: ffff888105ea1d80 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0xc6c/0x33c0 #1: ffffffff85b46820 (rcu_read_lock_bh){....}-{1:2}, at: vrf_output+0x2e3/0x2030 stack backtrace: CPU: 0 PID: 183 Comm: ping Not tainted 6.5.0-rc1-custom-g9c099e6dbf98 #403 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xc1/0xf0 lockdep_rcu_suspicious+0x211/0x3b0 vrf_output+0x1380/0x2030 ip_push_pending_frames+0x125/0x2a0 raw_sendmsg+0x200d/0x33c0 inet_sendmsg+0xa2/0xe0 __sys_sendto+0x2aa/0x420 __x64_sys_sendto+0xe5/0x1c0 do_syscall_64+0x38/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd [2] ============================= WARNING: suspicious RCU usage 6.5.0-rc1-custom-g9c099e6dbf98 #403 Not tainted ----------------------------- include/net/neighbour.h:302 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by ping6/182: #0: ffff888114b63000 (sk_lock-AF_INET6){+.+.}-{0:0}, at: rawv6_sendmsg+0x1602/0x3e50 #1: ffffffff85b46820 (rcu_read_lock_bh){....}-{1:2}, at: vrf_output6+0xe9/0x1310 stack backtrace: CPU: 0 PID: 182 Comm: ping6 Not tainted 6.5.0-rc1-custom-g9c099e6dbf98 #403 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xc1/0xf0 lockdep_rcu_suspicious+0x211/0x3b0 vrf_output6+0xd32/0x1310 ip6_local_out+0xb4/0x1a0 ip6_send_skb+0xbc/0x340 ip6_push_pending_frames+0xe5/0x110 rawv6_sendmsg+0x2e6e/0x3e50 inet_sendmsg+0xa2/0xe0 __sys_sendto+0x2aa/0x420 __x64_sys_sendto+0xe5/0x1c0 do_syscall_64+0x38/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd [3] #!/bin/bash ip link add name vrf-red up numtxqueues 2 type vrf table 10 ip link add name swp1 up master vrf-red type dummy ip address add 192.0.2.1/24 dev swp1 ip address add 2001:db8:1::1/64 dev swp1 ip neigh add 192.0.2.2 lladdr 00:11:22:33:44:55 nud perm dev swp1 ip neigh add 2001:db8:1::2 lladdr 00:11:22:33:44:55 nud perm dev swp1 ip vrf exec vrf-red ping 192.0.2.2 -c 1 &> /dev/null ip vrf exec vrf-red ping6 2001:db8:1::2 -c 1 &> /dev/null Fixes: 09eed119 ("neighbour: switch to standard rcu, instead of rcu_bh") Reported-by:Naresh Kamboju <naresh.kamboju@linaro.org> Link: https://lore.kernel.org/netdev/CA+G9fYtEr-=GbcXNDYo3XOkwR+uYgehVoDjsP0pFLUpZ_AZcyg@mail.gmail.com/Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queuePaolo Abeni authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-07-14 (ice) This series contains updates to ice driver only. Petr Oros removes multiple calls made to unregister netdev and devlink_port. Michal fixes null pointer dereference that can occur during reload. ==================== Link: https://lore.kernel.org/r/20230714201041.1717834-1-anthony.l.nguyen@intel.comSigned-off-by:
-
- 17 Jul, 2023 7 commits
-
-
Fedor Ross authored
The mcp251xfd controller needs an idle bus to enter 'Normal CAN 2.0 mode' or . The maximum length of a CAN frame is 736 bits (64 data bytes, CAN-FD, EFF mode, worst case bit stuffing and interframe spacing). For low bit rates like 10 kbit/s the arbitrarily chosen MCP251XFD_POLL_TIMEOUT_US of 1 ms is too small. Otherwise during polling for the CAN controller to enter 'Normal CAN 2.0 mode' the timeout limit is exceeded and the configuration fails with: | $ ip link set dev can1 up type can bitrate 10000 | [ 731.911072] mcp251xfd spi2.1 can1: Controller failed to enter mode CAN 2.0 Mode (6) and stays in Configuration Mode (4) (con=0x068b0760, osc=0x00000468). | [ 731.927192] mcp251xfd spi2.1 can1: CRC read error at address 0x0e0c (length=4, data=00 00 00 00, CRC=0x0000) retrying. | [ 731.938101] A link change request failed with some changes committed already. Interface can1 may have been left with an inconsistent configuration, please check. | RTNETLINK answers: Connection timed out Make MCP251XFD_POLL_TIMEOUT_US timeout calculation dynamic. Use maximum of 1ms and bit time of 1 full 64 data bytes CAN-FD frame in EFF mode, worst case bit stuffing and interframe spacing at the current bit rate. For easier backporting define the macro MCP251XFD_FRAME_LEN_MAX_BITS that holds the max frame length in bits, which is 736. This can be replaced by can_frame_bits(true, true, true, true, CANFD_MAX_DLEN) in a cleanup patch later. Fixes: 55e5b97f ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Signed-off-by:
Fedor Ross <fedor.ross@ifm.com> Signed-off-by:
Marek Vasut <marex@denx.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20230717-mcp251xfd-fix-increase-poll-timeout-v5-1-06600f34c684@pengutronix.deSigned-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Ahmed Zaki authored
The reset task is currently scheduled from the watchdog or adminq tasks. First, all direct calls to schedule the reset task are replaced with the iavf_schedule_reset(), which is modified to accept the flag showing the type of reset. To prevent the reset task from starting once iavf_remove() starts, we need to check the __IAVF_IN_REMOVE_TASK bit before we schedule it. This is now easily added to iavf_schedule_reset(). Finally, remove the check for IAVF_FLAG_RESET_NEEDED in the watchdog task. It is redundant since all callers who set the flag immediately schedules the reset task. Fixes: 3ccd54ef ("iavf: Fix init state closure on remove") Fixes: 14756b2a ("iavf: Fix __IAVF_RESETTING state usage") Signed-off-by:
Ahmed Zaki <ahmed.zaki@intel.com> Signed-off-by:
Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by:
Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by:
-
Ahmed Zaki authored
A driver's lock (crit_lock) is used to serialize all the driver's tasks. Lockdep, however, shows a circular dependency between rtnl and crit_lock. This happens when an ndo that already holds the rtnl requests the driver to reset, since the reset task (in some paths) tries to grab rtnl to either change real number of queues of update netdev features. [566.241851] ====================================================== [566.241893] WARNING: possible circular locking dependency detected [566.241936] 6.2.14-100.fc36.x86_64+debug #1 Tainted: G OE [566.241984] ------------------------------------------------------ [566.242025] repro.sh/2604 is trying to acquire lock: [566.242061] ffff9280fc5ceee8 (&adapter->crit_lock){+.+.}-{3:3}, at: iavf_close+0x3c/0x240 [iavf] [566.242167] but task is already holding lock: [566.242209] ffffffff9976d350 (rtnl_mutex){+.+.}-{3:3}, at: iavf_remove+0x6b5/0x730 [iavf] [566.242300] which lock already depends on the new lock. [566.242353] the existing dependency chain (in reverse order) is: [566.242401] -> #1 (rtnl_mutex){+.+.}-{3:3}: [566.242451] __mutex_lock+0xc1/0xbb0 [566.242489] iavf_init_interrupt_scheme+0x179/0x440 [iavf] [566.242560] iavf_watchdog_task+0x80b/0x1400 [iavf] [566.242627] process_one_work+0x2b3/0x560 [566.242663] worker_thread+0x4f/0x3a0 [566.242696] kthread+0xf2/0x120 [566.242730] ret_from_fork+0x29/0x50 [566.242763] -> #0 (&adapter->crit_lock){+.+.}-{3:3}: [566.242815] __lock_acquire+0x15ff/0x22b0 [566.242869] lock_acquire+0xd2/0x2c0 [566.242901] __mutex_lock+0xc1/0xbb0 [566.242934] iavf_close+0x3c/0x240 [iavf] [566.242997] __dev_close_many+0xac/0x120 [566.243036] dev_close_many+0x8b/0x140 [566.243071] unregister_netdevice_many_notify+0x165/0x7c0 [566.243116] unregister_netdevice_queue+0xd3/0x110 [566.243157] iavf_remove+0x6c1/0x730 [iavf] [566.243217] pci_device_remove+0x33/0xa0 [566.243257] device_release_driver_internal+0x1bc/0x240 [566.243299] pci_stop_bus_device+0x6c/0x90 [566.243338] pci_stop_and_remove_bus_device+0xe/0x20 [566.243380] pci_iov_remove_virtfn+0xd1/0x130 [566.243417] sriov_disable+0x34/0xe0 [566.243448] ice_free_vfs+0x2da/0x330 [ice] [566.244383] ice_sriov_configure+0x88/0xad0 [ice] [566.245353] sriov_numvfs_store+0xde/0x1d0 [566.246156] kernfs_fop_write_iter+0x15e/0x210 [566.246921] vfs_write+0x288/0x530 [566.247671] ksys_write+0x74/0xf0 [566.248408] do_syscall_64+0x58/0x80 [566.249145] entry_SYSCALL_64_after_hwframe+0x72/0xdc [566.249886] other info that might help us debug this: [566.252014] Possible unsafe locking scenario: [566.253432] CPU0 CPU1 [566.254118] ---- ---- [566.254800] lock(rtnl_mutex); [566.255514] lock(&adapter->crit_lock); [566.256233] lock(rtnl_mutex); [566.256897] lock(&adapter->crit_lock); [566.257388] *** DEADLOCK *** The deadlock can be triggered by a script that is continuously resetting the VF adapter while doing other operations requiring RTNL, e.g: while :; do ip link set $VF up ethtool --set-channels $VF combined 2 ip link set $VF down ip link set $VF up ethtool --set-channels $VF combined 4 ip link set $VF down done Any operation that triggers a reset can substitute "ethtool --set-channles" As a fix, add a new task "finish_config" that do all the work which needs rtnl lock. With the exception of iavf_remove(), all work that require rtnl should be called from this task. As for iavf_remove(), at the point where we need to call unregister_netdevice() (and grab rtnl_lock), we make sure the finish_config task is not running (cancel_work_sync()) to safely grab rtnl. Subsequent finish_config work cannot restart after that since the task is guarded by the __IAVF_IN_REMOVE_TASK bit in iavf_schedule_finish_config(). Fixes: 5ac49f3c ("iavf: use mutexes for locking of critical sections") Signed-off-by: -
Marcin Szycik authored
This reverts commit 08f1c147. Netdev is no longer being detached during reset, so this fix can be reverted. We leave the removal of "hacky" IFF_UP flag update. Signed-off-by:
Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by:
-
Marcin Szycik authored
This reverts commit aa626da9. Detaching device during reset was not fully fixing the rtnl locking issue, as there could be a situation where callback was already in progress before detaching netdev. Furthermore, detaching netdevice causes TX timeouts if traffic is running. To reproduce: ip netns exec ns1 iperf3 -c $PEER_IP -t 600 --logfile /dev/null & while :; do for i in 200 7000 400 5000 300 3000 ; do ip netns exec ns1 ip link set $VF1 mtu $i sleep 2 done sleep 10 done Currently, callbacks such as iavf_change_mtu() wait for the reset. If the reset fails to acquire the rtnl_lock, they schedule the netdev update for later while continuing the reset flow. Operations like MTU changes are performed under the rtnl_lock. Therefore, when the operation finishes, another callback that uses rtnl_lock can start. Signed-off-by:
Dawid Wesierski <dawidx.wesierski@intel.com> Signed-off-by:
-
Marcin Szycik authored
There was a fail when trying to add the interface to bonding right after changing the MTU on the interface. It was caused by bonding interface unable to open the interface due to interface being in __RESETTING state because of MTU change. Add new reset_waitqueue to indicate that reset has finished. Add waiting for reset to finish in callbacks which trigger hw reset: iavf_set_priv_flags(), iavf_change_mtu() and iavf_set_ringparam(). We use a 5000ms timeout period because on Hyper-V based systems, this operation takes around 3000-4000ms. In normal circumstances, it doesn't take more than 500ms to complete. Add a function iavf_wait_for_reset() to reuse waiting for reset code and use it also in iavf_set_channels(), which already waits for reset. We don't use error handling in iavf_set_channels() as this could cause the device to be in incorrect state if the reset was scheduled but hit timeout or the waitng function was interrupted by a signal. Fixes: 4e5e6b5d ("iavf: Fix return of set the new channel count") Signed-off-by:
Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by:
Kamil Maziarz <kamil.maziarz@intel.com> Signed-off-by:
-
Ahmed Zaki authored
If the system tries to close the netdev while iavf_reset_task() is running, __LINK_STATE_START will be cleared and netif_running() will return false in iavf_reinit_interrupt_scheme(). This will result in iavf_free_traffic_irqs() not being called and a leak as follows: [7632.489326] remove_proc_entry: removing non-empty directory 'irq/999', leaking at least 'iavf-enp24s0f0v0-TxRx-0' [7632.490214] WARNING: CPU: 0 PID: 10 at fs/proc/generic.c:718 remove_proc_entry+0x19b/0x1b0 is shown when pci_disable_msix() is later called. Fix by using the internal adapter state. The traffic IRQs will always exist if state == __IAVF_RUNNING. Fixes: 5b36e8d0 ("i40evf: Enable VF to request an alternate queue allocation") Signed-off-by:
-
