- 03 Aug, 2010 40 commits
-
-
Axel Lin authored
In current implementation, acpi_pcc_write_sset return 1 if write is successful, 0 if write is failed. But all the callers consider acpi_pcc_write_sset return 0 if write is successful and return negtive if write is failed. This patch changes the implementation of acpi_pcc_write_sset to return 0 if write is successful, -EIO if write is failed. Signed-off-by:
Axel Lin <axel.lin@gmail.com> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Axel Lin authored
The hotplug_disabled module parameter is determinated at the module load time. Change the value after the module is loaded does not make sense and has no effect at all, thus set the permissions to 0444 instead of 0644. Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Axel Lin authored
The wapf module parameters defines the behavior of the Fn+Fx wlan key. The wlan_status and bluetooth_status module parameters are for setting the wlan/bluetooth status on boot. All above module parameters are determinated only at the module load time. Change the value after the module is loaded does not make sense and has no effect at all, thus set the permissions to 0444 instead of 0644. Signed-off-by:
-
Axel Lin authored
Remove non-used acer_quirks struct definition. Signed-off-by:
-
Axel Lin authored
When acpi_evaluate_object() is passed ACPI_ALLOCATE_BUFFER, the caller must kfree the returned buffer if AE_OK is returned. Call Trace: wmab_execute -> wmi_evaluate_method -> acpi_evaluate_object Thus if callers of wmab_execute() pass ACPI_ALLOCATE_BUFFER, the return buffer must be kfreed if wmab_execute return AE_OK. [akpm@linux-foundation.org: avoid multiple return points, remove unneeded cast, remove unneeded initialisation of `status'] Signed-off-by:Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by:
-
Axel Lin authored
When acpi_evaluate_object() is passed ACPI_ALLOCATE_BUFFER, the caller must kfree the returned buffer if AE_OK is returned. The callers of wmi_query_block() pass ACPI_ALLOCATE_BUFFER, and thus must check its return value before accessing or kfree() on the buffer. This patch adds a missing kfree(out.pointer) before exit WMID_set_capabilities() and get_wmid_devices(). Signed-off-by:
-
Axel Lin authored
toshiba_acpi: rename add_device() and remove_device() to create_toshiba_proc_entries() and remove_toshiba_proc_entries() To improve readability rename add_device() to create_toshiba_proc_entries() and rename remove_device() to remove_toshiba_proc_entries(). Signed-off-by:
-
Axel Lin authored
Add error checking and return -ENOMEM if input_allocate_device() fail. Signed-off-by:
Thomas Renninger <trenn@suse.de> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by:
-
Axel Lin authored
remove_device() and add_device() are not related to ACPI APIs, it does not make sense to return acpi_status for both functions. Current implementation of add_device() always AE_OK, thus the return value checking for add_device() always return false for ACPI_FAILURE(status). This patch makes add_device() to be void and remove the unnecessary return value checking. remove_proc_entry() won't fail, thus change remove_device() to be void. Signed-off-by:
-
Axel Lin authored
Fix resource reclaim in below cases: 1. acerhdf_register_platform() does not properly handle platform_device_alloc() failure and platform_device_add() failure This patch adds error handing for acerhdf_register_platform(). 2. acerhdf_register_platform() return err with acerhdf_dev == NULL. as a result, acerhdf_unregister_platform() does not do resource reclaim in acerhdf_init() error path. This patch adds error handing for acerhdf_register_platform(), thus correct the error handing path in acerhdf_init(). goto out_err instead of err_unreg if acerhdf_register_platform() fail. 3. platform_device_del() should only used in error handling. Current implementation missed a platform_device_put() in acerhdf_exit. This patch fixes it by using platform_device_unregister() instead of platform_device_del() in acerhdf_unregister_platform. Signed-off-by:
Peter Feuerer <peter@piie.net> Cc: Matthew Garrett <mjg@redhat.com> Acked-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
-
Axel Lin authored
In current implementation, store_ledd() does not return error if write_acpi_int fail. This patch fixes it by return -ENODEV if write_acpi_int fail. Signed-off-by:
-
Axel Lin authored
According to the comments of write_acpi_int_ret(), write_acpi_int_ret() should return 0 if write is successful, -1 else. Thus if handle is NULL, the write does not happen, it should return -1. Signed-off-by:
-
Axel Lin authored
rfkill uses a const struct rfkill_ops pointer. Signed-off-by:
-
Axel Lin authored
The following symbols are needlessly defined global: logolamp_led kblamps_led This patch makes the symbols static. Signed-off-by:
Jonathan Woithe <jwoithe@physics.adelaide.edu.au> Signed-off-by:
-
Axel Lin authored
cmpc_accel_sensitivity_attr is needlessly defined global. This patch makes the symbol static. Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Daniel Oliveira Nascimento <don@syst.com.br> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by:
-
Axel Lin authored
The following symbols are needlessly defined global: thz_dev cl_dev acerhdf_dev acerhdf_dev_ops acerhdf_cooling_ops This patch makes the symbols static. Signed-off-by:
-
Axel Lin authored
In the case of no match ( hotk->model == END_MODEL ), the only posible case to return 0 is to have a Samsung P30 detected. This patch improves readability by moving related code after if/else clause to be inside if clause. Signed-off-by:
-
Axel Lin authored
In the case of no match ( hotk->model == END_MODEL ), model sholud be kfreed before return AE_OK. This patch includes below fixes: 1. adds a missing kfree(model) before return AE_OK. 2. asus_hotk_get_info should return int, thus return 0 instead of AE_OK. Signed-off-by:
-
Axel Lin authored
dmi_check_system() walks the table running matching functions until someone returns non zero or we hit the end. This patch makes dmi_check_cb to return 1 so dmi_check_system() return immediately when a match is found. Signed-off-by:
-
Roald Frederickx authored
The driver now supports the Compal JHL90 (which I use) and it has some added features. The biggest novelties are a battery interface (power_supply) and a temperature and fan control interface (hmwon). It also adds a power-off feature to the backlight subsystem and it exports a few files that can enable/disable wake_on_XXX events. Much of the original code of the old features is still there, but I've changed some names to keep the naming more coherent with the added functionalities. (Sorry for the huge patch) Some technical stuff about the new driver: First of all, I'm not sure if the extra features also work on the other Compal boards. Currently they only get enabled if the DMI data indicates you are on a JHL90 board. Secondly, I've noticed a quirk in my fan controller. I have to re-send the wanted pwm-level to the controller every so often. If I don't do this, the fanspeed will slowly rise until after a couple of minutes it's at full speed. (Note that every normal userland application will probably update the pwm-level every so often anyway, based on temperature readings, so this might not be an issue in practice) If this turns out to be a problem with all the controllers, maybe we should implement a kernel timer and have the driver re-send the pwm level every XX seconds to make this transparent to userspace? (However, I couldn't immediately find a way to do this cleanly.) Additional information can be found in the source comments. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: add missing semicolon] Signed-off-by:
Roald Frederickx <roald.frederickx@gmail.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by:
-
Randy Dunlap authored
compal-laptop uses hwmon interfaces, so it should depend on HWMON. compal-laptop.c:(.devinit.text+0x4071f): undefined reference to `hwmon_device_register' compal-laptop.c:(.devexit.text+0x6ec0): undefined reference to `hwmon_device_unregister' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Roald Frederickx <roald.frederickx@gmail.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by:
-
Axel Lin authored
input_free_device() should only be used if input_register_device() was not called yet or if it failed. This patch removes unnecessary input_free_device calls. Signed-off-by:
Dmitry Torokhov <dtor@mail.ru> Cc: Matthew Garrett <mjg@redhat.com>a Signed-off-by:
-
Peter Feuerer authored
Signed-off-by:
-
Rahul Chaturvedi authored
Driver didn't verify the pointers in which it got product information back from DMI; on QEMU one of the pointers came back null, which made the driver crash and subsequently caused a kernel panic. Signed-off-by:
Rahul Chaturvedi <rkc@chromium.org> Signed-off-by:
-
Peter Feuerer authored
Remove "chk_off" as it was only needed for T31 netbooks. But those netbooks can also be handled just with "cmd_off" register (0x9e) for reading the state back. Signed-off-by:
-
Peter Feuerer authored
Add new BIOS versions for Acer 1410 and 1810xx and Packard Bell netbooks. Fixed registers of Acer AOA150 BIOS version v0.3114: Old registers caused Fan to spin up at every temperature check. Signed-off-by:
-
Thomas Renninger authored
Signed-off-by:
-
Matthew Garrett authored
Thomas Bächler reports that his machine generates two keycodes for zooming in and out. Add these to the default keymap. Signed-off-by: -
Axel Lin authored
platform_device_unregister calls platform_device_del and platform_device_put, thus this change is logically equivalent to original code. I made this change because the documents in platform.c shows that: platform_device_del and platform_device_put must _only_ be externally called in error cases. All other usage is a bug. Signed-off-by:
-
Axel Lin authored
If dell_new_hk_type is true, dell_legacy_wmi_keymap will point to a memory allocated in setup_new_hk_map(). In this case, the memory is not freed in current implementation. This patch fixes the leak by kfree(dell_wmi_keymap) if dell_new_hk_type is true. Signed-off-by:
-
Axel Lin authored
dmi_check_system() walks the table running matching functions until someone returns non zero or we hit the end. This patch makes dmi_matched to return 1 so dmi_check_system() return immediately when a match is found. Signed-off-by:
-
Axel Lin authored
The interface file is not writable, thus set permissions to S_IRUGO. Signed-off-by:
-
Axel Lin authored
The callers of write_acpi_int_ret() pass ACPI_ALLOCATE_BUFFER, the caller must kfree the returned buffer if AE_OK is returned. This patch adds a missing kfree(buffer.pointer) before return -ENOMEM if kstrdup fail. Signed-off-by:
Corentin Chary <corentincj@iksaif.net> Signed-off-by:
-
Axel Lin authored
When acpi_evaluate_object() is passed ACPI_ALLOCATE_BUFFER, the caller must kfree the returned buffer if AE_OK is returned. The callers of wmi_get_event_data() pass ACPI_ALLOCATE_BUFFER, and thus must check its return value before accessing or kfree() on the buffer. This patch adds return value checking for wmi_get_event_data() and adds a missing kfree(obj) in the end of wmi_notify_debug Signed-off-by:
-
Islam Amer authored
Fixes pressing the eject key on Dell Studio 1555 does not work and produces message : dell-wmi: Unknown key 0 pressed Signed-off-by:Islam Amer <pharon@gmail.com>
-
Alan Cox authored
We exit staging rar! rar! rar!... Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Axel Lin authored
platform_device_unregister will also call platform_device_put() to drop reference count. Signed-off-by:
-
Axel Lin authored
This patch properly kfree out.pointer and gblock in error path. Signed-off-by:
-
Rezwanul Kabir authored
This is to support Precision M4500 and others. Signed-off-by:
Rezwanul Kabir <Rezwanul_Kabir@dell.com> Signed-off-by:
-
Axel Lin authored
This patch fixes the resource reclaim in acer_wmi_init error path. Signed-off-by:
-
