- 12 Oct, 2023 39 commits
-
-
Qu Wenruo authored
The parameter @need_raid_map is mostly a legacy from the old days where we don't yet have a solid definition on the @mirror_num, and only check-integrity was using that parameter, while all other call sites just pass 1 for that parameter. Now since we have removed check-integrity functionality, we can also remove the @need_raid_map parameter. This change will also remove the ability to read P/Q stripe directly when passing 0 as @need_raid_map. Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Qu Wenruo authored
Since all check-integrity entry points have been removed, let's also remove the config and all related code relying on that. And since we have removed the mount option for check-integrity, we also need to re-number all the BTRFS_MOUNT_* enums. Signed-off-by:
-
Qu Wenruo authored
The function btrfsic_mount() is part of the deprecated check-integrity functionality. Now let's remove the main entry point of check-integrity, and thankfully most of the check-integrity code is self-contained inside check-integrity.c, we can safely remove the function without huge changes to btrfs code base. Signed-off-by:
-
Qu Wenruo authored
The function btrfsic_mount() is part of the deprecated check-integrity functionality. Now let's remove the main entry point of check-integrity, and thankfully most of the check-integrity code is self-contained inside check-integrity.c, we can safely remove the function without huge changes to btrfs code base. Signed-off-by:
-
Qu Wenruo authored
The function btrfsic_check_bio() is part of the deprecated check-integrity functionality. Now let's remove the main entry point of check-integrity, and thankfully most of the check-integrity code is self-contained inside check-integrity.c, we can safely remove the function without huge changes to btrfs code base. Signed-off-by:
-
David Sterba authored
The lock_owner is used for a rare corruption case and we haven't seen any reports in years. Move it to the debugging section of eb. To close the holes also move log_index so the final layout looks like: struct extent_buffer { u64 start; /* 0 8 */ long unsigned int len; /* 8 8 */ long unsigned int bflags; /* 16 8 */ struct btrfs_fs_info * fs_info; /* 24 8 */ spinlock_t refs_lock; /* 32 4 */ atomic_t refs; /* 36 4 */ int read_mirror; /* 40 4 */ s8 log_index; /* 44 1 */ /* XXX 3 bytes hole, try to pack */ struct callback_head callback_head __attribute__((__aligned__(8))); /* 48 16 */ /* --- cacheline 1 boundary (64 bytes) --- */ struct rw_semaphore lock; /* 64 40 */ struct page * pages[16]; /* 104 128 */ /* size: 232, cachelines: 4, members: 11 */ /* sum members: 229, holes: 1, sum holes: 3 */ /* forced alignments: 1, forced holes: 1, sum forced holes: 3 */ /* last cacheline: 40 bytes */ } __attribute__((__aligned__(8))); This saves 8 bytes in total and still keeps the lock on a separate cacheline. Reviewed-by: -
David Sterba authored
We can reduce two members' size that in turn reduce size of struct btrfs_ref from 64 to 56 bytes. As the structure is often used as a local variable several functions reduce their stack usage. - make enum btrfs_ref_type packed, there are only 4 values - switch action and its values to a packed enum Final structure layout: struct btrfs_ref { enum btrfs_ref_type type; /* 0 1 */ enum btrfs_delayed_ref_action action; /* 1 1 */ bool skip_qgroup; /* 2 1 */ /* XXX 5 bytes hole, try to pack */ u64 bytenr; /* 8 8 */ u64 len; /* 16 8 */ u64 parent; /* 24 8 */ union { struct btrfs_data_ref data_ref; /* 32 24 */ struct btrfs_tree_ref tree_ref; /* 32 16 */ }; /* 32 24 */ /* size: 56, cachelines: 1, members: 7 */ /* sum members: 51, holes: 1, sum holes: 5 */ /* last cacheline: 56 bytes */ }; Reviewed-by: -
David Sterba authored
Currently the compression type values are bounded and fit to an u8, we can pack the btrfs_inode a bit by reordering them to the space created by the location key. This reduces size from 1112 to 1104. Reviewed-by:
-
David Sterba authored
The values of level are bounded and fit into a byte so let's use it for the structure to reduce size from 88 to 80 bytes on a release build, which increases number of objects in the default 8K slab from 93 to 102. struct prelim_ref { struct rb_node rbnode __attribute__((__aligned__(8))); /* 0 24 */ u64 root_id; /* 24 8 */ struct btrfs_key key_for_search; /* 32 17 */ u8 level; /* 49 1 */ /* XXX 2 bytes hole, try to pack */ int count; /* 52 4 */ struct extent_inode_elem * inode_list; /* 56 8 */ /* --- cacheline 1 boundary (64 bytes) --- */ u64 parent; /* 64 8 */ u64 wanted_disk_byte; /* 72 8 */ /* size: 80, cachelines: 2, members: 8 */ /* sum members: 78, holes: 1, sum holes: 2 */ /* forced alignments: 1 */ /* last cacheline: 16 bytes */ } __attribute__((__aligned__(8))); Reviewed-by: -
David Sterba authored
There are two helpers to increase used bytes of root items that add or subtract one node size, we don't need to pass the argument for that. Rename the function so it matches the root item member that gets changed. Reviewed-by:
-
David Sterba authored
Both callers of btrfs_pin_extent_for_log_replay expand the parameters to extent buffer members. We can simply pass the extent buffer instead. Reviewed-by:
-
David Sterba authored
There is only one caller of btrfs_pin_reserved_extent that expands the parameters to extent buffer members. We can simply pass the extent buffer instead. Reviewed-by:
-
David Sterba authored
Drop all __must_check annotations because they're used in random functions and not consistently. All errors should be handled. Reviewed-by:
-
David Sterba authored
Function name in the comment does not bring much value to code not exposed as API and we don't stick to the kdoc format anymore. Update formatting of parameter descriptions. Reviewed-by:
-
David Sterba authored
We keep the comments next to the implementation, there were some left to move. Reviewed-by:
-
Anand Jain authored
Add a comment explaining the relationship between fsid and metadata_uuid in the on-disk superblock and the in-memory struct btrfs_fs_devices. Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
Jiapeng Chong authored
These functions are defined in the qgroup.c file, but not called anymore since commit "btrfs: qgroup: use qgroup_iterator_nested to in qgroup_update_refcnt()" so we can delete them. fs/btrfs/qgroup.c:149:19: warning: unused function 'qgroup_to_aux'. fs/btrfs/qgroup.c:154:36: warning: unused function 'unode_aux_to_qgroup'. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6566Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by:
-
Qu Wenruo authored
Currently we go GFP_ATOMIC allocation for qgroup relation add, this includes the following 3 call sites: - btrfs_read_qgroup_config() This is not really needed, as at that time we're still in single thread mode, and no spin lock is held. - btrfs_add_qgroup_relation() This one is holding a spinlock, but we're ensured to add at most one relation, thus we can easily do a preallocation and use the preallocated memory to avoid GFP_ATOMIC. - btrfs_qgroup_inherit() This is a little more tricky, as we may have as many relationships as inherit::num_qgroups. Thus we have to properly allocate an array then preallocate all the memory. This patch would remove the GFP_ATOMIC allocation for above involved call sites, by doing preallocation before holding the spinlock, and let __add_relation_rb() to handle the freeing of the structure. Signed-off-by:
-
Qu Wenruo authored
Qgroup is the heaviest user of GFP_ATOMIC, but one call site does not really need GFP_ATOMIC, that is add_qgroup_rb(). That function only searches the rbtree to find if we already have such entry. If not, then it would try to allocate memory for it. This means we can afford to pre-allocate such structure unconditionally, then free the memory if it's not needed. Considering this function is not a hot path, only utilized by the following functions: - btrfs_qgroup_inherit() For "btrfs subvolume snapshot -i" option. - btrfs_read_qgroup_config() At mount time, and we're ensured there would be no existing rb tree entry for each qgroup. - btrfs_create_qgroup() Thus we're completely safe to pre-allocate the extra memory for btrfs_qgroup structure, and reduce unnecessary GFP_ATOMIC usage. Reviewed-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
-
Qu Wenruo authored
The ulist @qgroups is utilized to record all involved qgroups from both old and new roots inside btrfs_qgroup_account_extent(). Due to the fact that qgroup_update_refcnt() itself is already utilizing qgroup_iterator, here we have to introduce another list_head, btrfs_qgroup::nested_iterator, allowing nested iteration. Signed-off-by:
-
Qu Wenruo authored
For function qgroup_update_refcnt(), we use @tmp list to iterate all the involved qgroups of a subvolume. It's a perfect match for qgroup_iterator facility, as that @tmp ulist has a very limited lifespan (just inside the while() loop). By migrating to qgroup_iterator, we can get rid of the GFP_ATOMIC memory allocation and no error handling is needed. Reviewed-by:
Boris Burkov <boris@bur.io> Signed-off-by:
-
Qu Wenruo authored
With the new qgroup_iterator_add() and qgroup_iterator_clean(), we can get rid of the ulist and its GFP_ATOMIC memory allocation. Furthermore we can merge the code handling the initial and parent qgroups into one loop, and drop the @tmp ulist parameter for involved call sites. Reviewed-by:
-
Qu Wenruo authored
With the new qgroup_iterator_add() and qgroup_iterator_clean(), we can get rid of the ulist and its GFP_ATOMIC memory allocation. Reviewed-by:
-
Qu Wenruo authored
With the new qgroup_iterator_add() and qgroup_iterator_clean(), we can get rid of the ulist and its GFP_ATOMIC memory allocation. Reviewed-by:
-
Qu Wenruo authored
Qgroup heavily relies on ulist to go through all the involved qgroups, but since we're using ulist inside fs_info->qgroup_lock spinlock, this means we're doing a lot of GFP_ATOMIC allocations. This patch reduces the GFP_ATOMIC usage for qgroup_reserve() by eliminating the memory allocation completely. This is done by moving the needed memory to btrfs_qgroup::iterator list_head, so that we can put all the involved qgroup into a on-stack list, thus eliminating the need to allocate memory while holding spinlock. The only cost is the slightly higher memory usage, but considering the reduce GFP_ATOMIC during a hot path, it should still be acceptable. Function qgroup_reserve() is the perfect start point for this conversion. Reviewed-by:
-
Josef Bacik authored
We don't need any of these includes in the ctree.h header file for the header file itself, remove them to clean up ctree.h a little bit. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
-
Josef Bacik authored
We use some of the security related code in here, include it in super.c so we can remove the include from ctree.h. Reviewed-by:
-
Josef Bacik authored
If we no longer include the tracepoints from ctree.h we fail to compile because we have the dependency in some of the header files and source files. Add the include where we have these dependencies to allow us to remove the include from ctree.h. Reviewed-by:
-
Josef Bacik authored
extent-tree.h uses btrfs_delayed_ref_head in a function argument but doesn't pull it's declaration from anywhere, add it to the top of the header. Reviewed-by:
-
Josef Bacik authored
These headers have struct fscrypt_str as function arguments, so add struct fscrypt_str to the theader, and include linux/fscrypt.h in btrfs_inode.h as it also needs the definition of struct fscrypt_name for the new inode args. Reviewed-by:
-
Josef Bacik authored
We use the iomap code in file.c, include it so we have our dependencies. Reviewed-by:
-
Josef Bacik authored
We use the unaligned helpers directly in accessors.h, add the include here. Reviewed-by:
-
Josef Bacik authored
This is related to the name hashing for dir items, move it into dir-item.h. Reviewed-by:
-
Josef Bacik authored
Ideally this would be un-inlined, but that is a cleanup for later. For now move this into inode-item.h, which is where the extref code lives. Reviewed-by:
-
Josef Bacik authored
This simply sends the same arguments into crc32c(), and is just used in a few places. Remove this wrapper and directly call crc32c() in these instances. Reviewed-by:
-
Josef Bacik authored
This is the only place this helper is used, take it out of ctree.h and move it into free-space-cache.c. Reviewed-by:
-
Qu Wenruo authored
The flag EXTENT_NOWAIT is a special flag to notify extent-io-tree code that this operation should not sleep for the extent state preallocation. However for btrfs_redirty_list_add(), all callers are able to sleep: - clean_log_buffer() Just 2 lines before, we call btrfs_pin_reserved_extent(), which calls pin_down_extent(), and that function does not require EXTENT_NOWAIT. Thus we're safe to call it without EXTENT_NOWAIT. - btrfs_free_tree_block() This function have several call sites which trigger tree read, e.g. walk_up_proc(), thus we're safe to call it without EXTENT_NOWAIT. Thus there is no need to require EXTENT_NOWAIT flag. Signed-off-by:
-
Anand Jain authored
Among all the callers, only the device_list_add() function uses the second argument of alloc_fs_devices(). It passes metadata_uuid when available, otherwise, it passes NULL. And in turn, alloc_fs_devices() is designed to copy either metadata_uuid or fsid into fs_devices::metadata_uuid. So remove the second argument in alloc_fs_devices(), and always copy the fsid. In the caller device_list_add() function, we will overwrite it with metadata_uuid when it is available. Signed-off-by:
-
Filipe Manana authored
The second comment at btrfs_delayed_item_reserve_metadata() refers to a field named "index_items_size" of a delayed inode, however that field does not exists - it existed in a previous patch version, but then it split into the fields "curr_index_batch_size" and "index_item_leaves" in the final patch version that was picked. So update the comment. Reviewed-by:
-
- 11 Oct, 2023 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull quota regression fix from Jan Kara. * tag 'fs_for_v6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: quota: Fix slow quotaoff
-
