- 08 Jun, 2022 12 commits
-
-
Sean Christopherson authored
All of sync_page()'s existing checks filter out only !PRESENT gPTE, because without execute-only, all upper levels are guaranteed to be at least READABLE. However, if EPT with execute-only support is in use by L1, KVM can create an SPTE that is shadow-present but guest-inaccessible (RWX=0) if the upper level combined permissions are R (or RW) and the leaf EPTE is changed from R (or RW) to X. Because the EPTE is considered present when viewed in isolation, and no reserved bits are set, FNAME(prefetch_invalid_gpte) will consider the GPTE valid, and cause a not-present SPTE to be created. The SPTE is "correct": the guest translation is inaccessible because the combined protections of all levels yield RWX=0, and KVM will just redirect any vmexits to the guest. If EPT A/D bits are disabled, KVM can mistake the SPTE for an access-tracked SPTE, but again such confusion isn't fatal, as the "saved" protections are also RWX=0. However, creating a useless SPTE in general means that KVM messed up something, even if this particular goof didn't manifest as a functional bug. So, drop SPTEs whose new protections will yield a RWX=0 SPTE, and add a WARN in make_spte() to detect creation of SPTEs that will result in RWX=0 protections. Fixes: d95c5568 ("kvm: mmu: track read permission explicitly for shadow EPT page tables") Cc: David Matlack <dmatlack@google.com> Cc: Ben Gardon <bgardon@google.com> Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20220513195000.99371-2-seanjc@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Maciej S. Szmigiero authored
Add a KVM self-test that checks whether a nSVM L1 is able to successfully inject a software interrupt, a soft exception and a NMI into its L2 guest. In practice, this tests both the next_rip field consistency and L1-injected event with intervening L0 VMEXIT during its delivery: the first nested VMRUN (that's also trying to inject a software interrupt) will immediately trigger a L0 NPF. This L0 NPF will have zero in its CPU-returned next_rip field, which if incorrectly reused by KVM will trigger a #PF when trying to return to such address 0 from the interrupt handler. For NMI injection this tests whether the L1 NMI state isn't getting incorrectly mixed with the L2 NMI state if a L1 -> L2 NMI needs to be re-injected. Reviewed-by:
Maxim Levitsky <mlevitsk@redhat.com> [sean: check exact L2 RIP on first soft interrupt] Signed-off-by:
Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <d5f3d56528558ad8e28a9f1e1e4187f5a1e6770a.1651440202.git.maciej.szmigiero@oracle.com> Signed-off-by:
-
Maciej S. Szmigiero authored
A NMI that L1 wants to inject into its L2 should be directly re-injected, without causing L0 side effects like engaging NMI blocking for L1. It's also worth noting that in this case it is L1 responsibility to track the NMI window status for its L2 guest. Signed-off-by:
-
Sean Christopherson authored
In the IRQ injection tracepoint, differentiate between Hard IRQs and Soft "IRQs", i.e. interrupts that are reinjected after incomplete delivery of a software interrupt from an INTn instruction. Tag reinjected interrupts as such, even though the information is usually redundant since soft interrupts are only ever reinjected by KVM. Though rare in practice, a hard IRQ can be reinjected. Signed-off-by:
-
Sean Christopherson authored
Print the error code in the exception injection tracepoint if and only if the exception has an error code. Define the entire error code sequence as a set of formatted strings, print empty strings if there's no error code, and abuse __print_symbolic() by passing it an empty array to coerce it into printing the error code as a hex string. Signed-off-by:
-
Sean Christopherson authored
Trace exceptions that are re-injected, not just those that KVM is injecting for the first time. Debugging re-injection bugs is painful enough as is, not having visibility into what KVM is doing only makes things worse. Delay propagating pending=>injected in the non-reinjection path so that the tracing can properly identify reinjected exceptions. Signed-off-by:
-
Sean Christopherson authored
Re-inject INTn software interrupts instead of retrying the instruction if the CPU encountered an intercepted exception while vectoring the INTn, e.g. if KVM intercepted a #PF when utilizing shadow paging. Retrying the instruction is architecturally wrong e.g. will result in a spurious #DB if there's a code breakpoint on the INT3/O, and lack of re-injection also breaks nested virtualization, e.g. if L1 injects a software interrupt and vectoring the injected interrupt encounters an exception that is intercepted by L0 but not L1. Signed-off-by:
-
Sean Christopherson authored
Re-inject INT3/INTO instead of retrying the instruction if the CPU encountered an intercepted exception while vectoring the software exception, e.g. if vectoring INT3 encounters a #PF and KVM is using shadow paging. Retrying the instruction is architecturally wrong, e.g. will result in a spurious #DB if there's a code breakpoint on the INT3/O, and lack of re-injection also breaks nested virtualization, e.g. if L1 injects a software exception and vectoring the injected exception encounters an exception that is intercepted by L0 but not L1. Due to, ahem, deficiencies in the SVM architecture, acquiring the next RIP may require flowing through the emulator even if NRIPS is supported, as the CPU clears next_rip if the VM-Exit is due to an exception other than "exceptions caused by the INT3, INTO, and BOUND instructions". To deal with this, "skip" the instruction to calculate next_rip (if it's not already known), and then unwind the RIP write and any side effects (RFLAGS updates). Save the computed next_rip and use it to re-stuff next_rip if injection doesn't complete. This allows KVM to do the right thing if next_rip was known prior to injection, e.g. if L1 injects a soft event into L2, and there is no backing INTn instruction, e.g. if L1 is injecting an arbitrary event. Note, it's impossible to guarantee architectural correctness given SVM's architectural flaws. E.g. if the guest executes INTn (no KVM injection), an exit occurs while vectoring the INTn, and the guest modifies the code stream while the exit is being handled, KVM will compute the incorrect next_rip due to "skipping" the wrong instruction. A future enhancement to make this less awful would be for KVM to detect that the decoded instruction is not the correct INTn and drop the to-be-injected soft event (retrying is a lesser evil compared to shoving the wrong RIP on the exception stack). Reported-by:
-
Sean Christopherson authored
If NRIPS is supported in hardware but disabled in KVM, set next_rip to the next RIP when advancing RIP as part of emulating INT3 injection. There is no flag to tell the CPU that KVM isn't using next_rip, and so leaving next_rip is left as is will result in the CPU pushing garbage onto the stack when vectoring the injected event. Reviewed-by:
-
Sean Christopherson authored
Unwind the RIP advancement done by svm_queue_exception() when injecting an INT3 ultimately "fails" due to the CPU encountering a VM-Exit while vectoring the injected event, even if the exception reported by the CPU isn't the same event that was injected. If vectoring INT3 encounters an exception, e.g. #NP, and vectoring the #NP encounters an intercepted exception, e.g. #PF when KVM is using shadow paging, then the #NP will be reported as the event that was in-progress. Note, this is still imperfect, as it will get a false positive if the INT3 is cleanly injected, no VM-Exit occurs before the IRET from the INT3 handler in the guest, the instruction following the INT3 generates an exception (directly or indirectly), _and_ vectoring that exception encounters an exception that is intercepted by KVM. The false positives could theoretically be solved by further analyzing the vectoring event, e.g. by comparing the error code against the expected error code were an exception to occur when vectoring the original injected exception, but SVM without NRIPS is a complete disaster, trying to make it 100% correct is a waste of time. Reviewed-by:
-
Maciej S. Szmigiero authored
Don't BUG/WARN on interrupt injection due to GIF being cleared, since it's trivial for userspace to force the situation via KVM_SET_VCPU_EVENTS (even if having at least a WARN there would be correct for KVM internally generated injections). kernel BUG at arch/x86/kvm/svm/svm.c:3386! invalid opcode: 0000 [#1] SMP CPU: 15 PID: 926 Comm: smm_test Not tainted 5.17.0-rc3+ #264 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:svm_inject_irq+0xab/0xb0 [kvm_amd] Code: <0f> 0b 0f 1f 00 0f 1f 44 00 00 80 3d ac b3 01 00 00 55 48 89 f5 53 RSP: 0018:ffffc90000b37d88 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88810a234ac0 RCX: 0000000000000006 RDX: 0000000000000000 RSI: ffffc90000b37df7 RDI: ffff88810a234ac0 RBP: ffffc90000b37df7 R08: ffff88810a1fa410 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff888109571000 R14: ffff88810a234ac0 R15: 0000000000000000 FS: 0000000001821380(0000) GS:ffff88846fdc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f74fc550008 CR3: 000000010a6fe000 CR4: 0000000000350ea0 Call Trace: <TASK> inject_pending_event+0x2f7/0x4c0 [kvm] kvm_arch_vcpu_ioctl_run+0x791/0x17a0 [kvm] kvm_vcpu_ioctl+0x26d/0x650 [kvm] __x64_sys_ioctl+0x82/0xb0 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> Fixes: 219b65dc ("KVM: SVM: Improve nested interrupt injection") Cc: stable@vger.kernel.org Co-developed-by:
-
Maciej S. Szmigiero authored
The next_rip field of a VMCB is *not* an output-only field for a VMRUN. This field value (instead of the saved guest RIP) in used by the CPU for the return address pushed on stack when injecting a software interrupt or INT3 or INTO exception. Make sure this field gets synced from vmcb12 to vmcb02 when entering L2 or loading a nested state and NRIPS is exposed to L1. If NRIPS is supported in hardware but not exposed to L1 (nrips=0 or hidden by userspace), stuff vmcb02's next_rip from the new L2 RIP to emulate a !NRIPS CPU (which saves RIP on the stack as-is). Reviewed-by:
-
- 07 Jun, 2022 10 commits
-
-
Paolo Bonzini authored
Merge tag 'kvm-s390-next-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: pvdump and selftest improvements - add an interface to provide a hypervisor dump for secure guests - improve selftests to show tests
-
Paolo Bonzini authored
-
Paolo Bonzini authored
-
Maxim Levitsky authored
SVM uses a per-cpu variable to cache the current value of the tsc scaling multiplier msr on each cpu. Commit 1ab9287a ("KVM: X86: Add vendor callbacks for writing the TSC multiplier") broke this caching logic. Refactor the code so that all TSC scaling multiplier writes go through a single function which checks and updates the cache. This fixes the following scenario: 1. A CPU runs a guest with some tsc scaling ratio. 2. New guest with different tsc scaling ratio starts on this CPU and terminates almost immediately. This ensures that the short running guest had set the tsc scaling ratio just once when it was set via KVM_SET_TSC_KHZ. Due to the bug, the per-cpu cache is not updated. 3. The original guest continues to run, it doesn't restore the msr value back to its own value, because the cache matches, and thus continues to run with a wrong tsc scaling ratio. Fixes: 1ab9287a ("KVM: X86: Add vendor callbacks for writing the TSC multiplier") Signed-off-by:
-
Vitaly Kuznetsov authored
hyperv_clock doesn't always give a stable test result, especially with AMD CPUs. The test compares Hyper-V MSR clocksource (acquired either with rdmsr() from within the guest or KVM_GET_MSRS from the host) against rdtsc(). To increase the accuracy, increase the measured delay (done with nop loop) by two orders of magnitude and take the mean rdtsc() value before and after rdmsr()/KVM_GET_MSRS. Reported-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by:
-
Ben Gardon authored
Currently disabling dirty logging with the TDP MMU is extremely slow. On a 96 vCPU / 96G VM backed with gigabyte pages, it takes ~200 seconds to disable dirty logging with the TDP MMU, as opposed to ~4 seconds with the shadow MMU. When disabling dirty logging, zap non-leaf parent entries to allow replacement with huge pages instead of recursing and zapping all of the child, leaf entries. This reduces the number of TLB flushes required. and reduces the disable dirty log time with the TDP MMU to ~3 seconds. Opportunistically add a WARN() to catch GFNs that are mapped at a higher level than their max level. Signed-off-by:
Ben Gardon <bgardon@google.com> Message-Id: <20220525230904.1584480-1-bgardon@google.com> Signed-off-by:
-
Jan Beulich authored
As noted (and fixed) a couple of times in the past, "=@cc<cond>" outputs and clobbering of "cc" don't work well together. The compiler appears to mean to reject such, but doesn't - in its upstream form - quite manage to yet for "cc". Furthermore two similar macros don't clobber "cc", and clobbering "cc" is pointless in asm()-s for x86 anyway - the compiler always assumes status flags to be clobbered there. Fixes: 989b5db2 ("x86/uaccess: Implement macros for CMPXCHG on user addresses") Signed-off-by:
Jan Beulich <jbeulich@suse.com> Message-Id: <485c0c0b-a3a7-0b7c-5264-7d00c01de032@suse.com> Signed-off-by:
-
Shaoqin Huang authored
When freeing obsolete previous roots, check prev_roots as intended, not the current root. Signed-off-by:
Shaoqin Huang <shaoqin.huang@intel.com> Fixes: 527d5cd7 ("KVM: x86/mmu: Zap only obsolete roots if a root shadow page is zapped") Message-Id: <20220607005905.2933378-1-shaoqin.huang@intel.com> Cc: stable@vger.kernel.org Reviewed-by:
-
Seth Forshee authored
A livepatch transition may stall indefinitely when a kvm vCPU is heavily loaded. To the host, the vCPU task is a user thread which is spending a very long time in the ioctl(KVM_RUN) syscall. During livepatch transition, set_notify_signal() will be called on such tasks to interrupt the syscall so that the task can be transitioned. This interrupts guest execution, but when xfer_to_guest_mode_work() sees that TIF_NOTIFY_SIGNAL is set but not TIF_SIGPENDING it concludes that an exit to user mode is unnecessary, and guest execution is resumed without transitioning the task for the livepatch. This handling of TIF_NOTIFY_SIGNAL is incorrect, as set_notify_signal() is expected to break tasks out of interruptible kernel loops and cause them to return to userspace. Change xfer_to_guest_mode_work() to handle TIF_NOTIFY_SIGNAL the same as TIF_SIGPENDING, signaling to the vCPU run loop that an exit to userpsace is needed. Any pending task_work will be run when get_signal() is called from exit_to_user_mode_loop(), so there is no longer any need to run task work from xfer_to_guest_mode_work(). Suggested-by:
"Eric W. Biederman" <ebiederm@xmission.com> Cc: Petr Mladek <pmladek@suse.com> Signed-off-by:
Seth Forshee <sforshee@digitalocean.com> Message-Id: <20220504180840.2907296-1-sforshee@digitalocean.com> Signed-off-by:
-
Alexey Kardashevskiy authored
A KVM device cleanup happens in either of two callbacks: 1) destroy() which is called when the VM is being destroyed; 2) release() which is called when a device fd is closed. Most KVM devices use 1) but Book3s's interrupt controller KVM devices (XICS, XIVE, XIVE-native) use 2) as they need to close and reopen during the machine execution. The error handling in kvm_ioctl_create_device() assumes destroy() is always defined which leads to NULL dereference as discovered by Syzkaller. This adds a checks for destroy!=NULL and adds a missing release(). This is not changing kvm_destroy_devices() as devices with defined release() should have been removed from the KVM devices list by then. Suggested-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
- 06 Jun, 2022 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull file descriptor fix from Al Viro: "Fix for breakage in #work.fd this window" * tag 'pull-work.fd-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix the breakage in close_fd_get_file() calling conventions change
-
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mmLinus Torvalds authored
Pull mm hotfixes from Andrew Morton: "Fixups for various recently-added and longer-term issues and a few minor tweaks: - fixes for material merged during this merge window - cc:stable fixes for more longstanding issues - minor mailmap and MAINTAINERS updates" * tag 'mm-hotfixes-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm/oom_kill.c: fix vm_oom_kill_table[] ifdeffery x86/kexec: fix memory leak of elf header buffer mm/memremap: fix missing call to untrack_pfn() in pagemap_range() mm: page_isolation: use compound_nr() correctly in isolate_single_pageblock() mm: hugetlb_vmemmap: fix CONFIG_HUGETLB_PAGE_FREE_VMEMMAP_DEFAULT_ON MAINTAINERS: add maintainer information for z3fold mailmap: update Josh Poimboeuf's email
-
- 05 Jun, 2022 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mmLinus Torvalds authored
Pull delay-accounting update from Andrew Morton: "A single featurette for delay accounting. Delayed a bit because, unusually, it had dependencies on both the mm-stable and mm-nonmm-stable queues" * tag 'mm-nonmm-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: delayacct: track delays from write-protect copy
-
Linus Torvalds authored
The bluetooth code uses our bitmap infrastructure for the two bits (!) of connection setup flags, and in the process causes odd problems when it converts between a bitmap and just the regular values of said bits. It's completely pointless to do things like bitmap_to_arr32() to convert a bitmap into a u32. It shoudln't have been a bitmap in the first place. The reason to use bitmaps is if you have arbitrary number of bits you want to manage (not two!), or if you rely on the atomicity guarantees of the bitmap setting and clearing. The code could use an "atomic_t" and use "atomic_or/andnot()" to set and clear the bit values, but considering that it then copies the bitmaps around with "bitmap_to_arr32()" and friends, there clearly cannot be a lot of atomicity requirements. So just use a regular integer. In the process, this avoids the warnings about erroneous use of bitmap_from_u64() which were triggered on 32-bit architectures when conversion from a u64 would access two words (and, surprise, surprise, only one word is needed - and indeed overkill - for a 2-bit bitmap). That was always problematic, but the compiler seems to notice it and warn about the invalid pattern only after commit 0a97953f ("lib: add bitmap_{from,to}_arr64") changed the exact implementation details of 'bitmap_from_u64()', as reported by Sudip Mukherjee and Stephen Rothwell. Fixes: fe92ee64 ("Bluetooth: hci_core: Rework hci_conn_params flags") Link: https://lore.kernel.org/all/YpyJ9qTNHJzz0FHY@debian/ Link: https://lore.kernel.org/all/20220606080631.0c3014f2@canb.auug.org.au/ Link: https://lore.kernel.org/all/20220605162537.1604762-1-yury.norov@gmail.com/Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Reported-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Reviewed-by:
Yury Norov <yury.norov@gmail.com> Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Al Viro authored
It used to grab an extra reference to struct file rather than just transferring to caller the one it had removed from descriptor table. New variant doesn't, and callers need to be adjusted. Reported-and-tested-by: syzbot+47dd250f527cb7bebf24@syzkaller.appspotmail.com Fixes: 6319194e ("Unify the primitives for file descriptor closing") Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 SGX fix from Thomas Gleixner: "A single fix for x86/SGX to prevent that memory which is allocated for an SGX enclave is accounted to the wrong memory control group" * tag 'x86-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sgx: Set active memcg prior to shmem allocation
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 mm cleanup from Thomas Gleixner: "Use PAGE_ALIGNED() instead of open coding it in the x86/mm code" * tag 'x86-mm-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Use PAGE_ALIGNED(x) instead of IS_ALIGNED(x, PAGE_SIZE)
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 microcode updates from Thomas Gleixner: - Disable late microcode loading by default. Unless the HW people get their act together and provide a required minimum version in the microcode header for making a halfways informed decision its just lottery and broken. - Warn and taint the kernel when microcode is loaded late - Remove the old unused microcode loader interface - Remove a redundant perf callback from the microcode loader * tag 'x86-microcode-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode: Remove unnecessary perf callback x86/microcode: Taint and warn on late loading x86/microcode: Default-disable late loading x86/microcode: Rip out the OLD_INTERFACE
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 cleanups from Thomas Gleixner: "A set of small x86 cleanups: - Remove unused headers in the IDT code - Kconfig indendation and comment fixes - Fix all 'the the' typos in one go instead of waiting for bots to fix one at a time" * tag 'x86-cleanups-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Fix all occurences of the "the the" typo x86/idt: Remove unused headers x86/Kconfig: Fix indentation of arch/x86/Kconfig.debug x86/Kconfig: Fix indentation and add endif comments to arch/x86/Kconfig -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 boot update from Thomas Gleixner: "Use strlcpy() instead of strscpy() in arch_setup()" * tag 'x86-boot-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/setup: Use strscpy() to replace deprecated strlcpy()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull clockevent/clocksource updates from Thomas Gleixner: - Device tree bindings for MT8186 - Tell the kernel that the RISC-V SBI timer stops in deeper power states - Make device tree parsing in sp804 more robust - Dead code removal and tiny fixes here and there - Add the missing SPDX identifiers * tag 'timers-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value clocksource/drivers/timer-ti-dm: Remove unnecessary NULL check clocksource/drivers/timer-sun5i: Convert to SPDX identifier clocksource/drivers/timer-sun4i: Convert to SPDX identifier clocksource/drivers/pistachio: Convert to SPDX identifier clocksource/drivers/orion: Convert to SPDX identifier clocksource/drivers/lpc32xx: Convert to SPDX identifier clocksource/drivers/digicolor: Convert to SPDX identifier clocksource/drivers/armada-370-xp: Convert to SPDX identifier clocksource/drivers/mips-gic-timer: Convert to SPDX identifier clocksource/drivers/jcore: Convert to SPDX identifier clocksource/drivers/bcm_kona: Convert to SPDX identifier clocksource/drivers/sp804: Avoid error on multiple instances clocksource/drivers/riscv: Events are stopped during CPU suspend clocksource/drivers/ixp4xx: Drop boardfile probe path dt-bindings: timer: Add compatible for Mediatek MT8186
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Thomas Gleixner: "Fix the fallout of sysctl code move which placed the init function wrong" * tag 'sched-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/autogroup: Fix sysctl move
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: - Make the ICL event constraints match reality - Remove a unused local variable * tag 'perf-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Remove unused local variable perf/x86/intel: Fix event constraints for ICL
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixlet from Thomas Gleixner: "Trivial indentation fix in Kconfig" * tag 'perf-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/Kconfig: Fix indentation in the Kconfig file
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool fixes from Thomas Gleixner: - Handle __ubsan_handle_builtin_unreachable() correctly and treat it as noreturn - Allow architectures to select uaccess validation - Use the non-instrumented bit test for test_cpu_has() to prevent escape from non-instrumentable regions - Use arch_ prefixed atomics for JUMP_LABEL=n builds to prevent escape from non-instrumentable regions - Mark a few tiny inline as __always_inline to prevent GCC from bringing them out of line and instrumenting them - Mark the empty stub context_tracking_enabled() as always inline as GCC brings them out of line and instruments the empty shell - Annotate ex_handler_msr_mce() as dead end * tag 'objtool-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/extable: Annotate ex_handler_msr_mce() as a dead end context_tracking: Always inline empty stubs x86: Always inline on_thread_stack() and current_top_of_stack() jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n builds x86/cpu: Elide KCSAN for cpu_has() and friends objtool: Mark __ubsan_handle_builtin_unreachable() as noreturn objtool: Add CONFIG_HAVE_UACCESS_VALIDATION
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "Mostly small bug fixes plus other trivial updates. The major change of note is moving ufs out of scsi and a minor update to lpfc vmid handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits) scsi: qla2xxx: Remove unused 'ql_dm_tgt_ex_pct' parameter scsi: qla2xxx: Remove setting of 'req' and 'rsp' parameters scsi: mpi3mr: Fix kernel-doc scsi: lpfc: Add support for ATTO Fibre Channel devices scsi: core: Return BLK_STS_TRANSPORT for ALUA transitioning scsi: sd_zbc: Prevent zone information memory leak scsi: sd: Fix potential NULL pointer dereference scsi: mpi3mr: Rework mrioc->bsg_device model to fix warnings scsi: myrb: Fix up null pointer access on myrb_cleanup() scsi: core: Unexport scsi_bus_type scsi: sd: Don't call blk_cleanup_disk() in sd_probe() scsi: ufs: ufshcd: Delete unnecessary NULL check scsi: isci: Fix typo in comment scsi: pmcraid: Fix typo in comment scsi: smartpqi: Fix typo in comment scsi: qedf: Fix typo in comment scsi: esas2r: Fix typo in comment scsi: storvsc: Fix typo in comment scsi: ufs: Split the drivers/scsi/ufs directory scsi: qla1280: Remove redundant variable ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linuxLinus Torvalds authored
Pull hardware timestamping subsystem from Thierry Reding: "This contains the new HTE (hardware timestamping engine) subsystem that has been in the works for a couple of months now. The infrastructure provided allows for drivers to register as hardware timestamp providers, while consumers will be able to request events that they are interested in (such as GPIOs and IRQs) to be timestamped by the hardware providers. Note that this currently supports only one provider, but there seems to be enough interest in this functionality and we expect to see more drivers added once this is merged" [ Linus Walleij mentions the Intel PMC in the Elkhart and Tiger Lake platforms as another future timestamp provider ] * tag 'hte/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: timestamp: Correct id path dt-bindings: Renamed hte directory to timestamp hte: Uninitialized variable in hte_ts_get() hte: Fix off by one in hte_push_ts_ns() hte: Fix possible use-after-free in tegra_hte_test_remove() hte: Remove unused including <linux/version.h> MAINTAINERS: Add HTE Subsystem hte: Add Tegra HTE test driver tools: gpio: Add new hardware clock type gpiolib: cdev: Add hardware timestamp clock type gpio: tegra186: Add HTE support gpiolib: Add HTE support dt-bindings: Add HTE bindings hte: Add Tegra194 HTE kernel provider drivers: Add hardware timestamp engine (HTE) subsystem Documentation: Add HTE subsystem guide
-
