- 26 May, 2021 7 commits
-
-
Jesse Brandeburg authored
The igb PTP code was using htons() on a constant to try to byte swap the value before writing it to a register. This byte swap has the consequence of triggering sparse conflicts between the register write which expect cpu ordered input, and the code which generated a big endian constant. Just override the cast to make sure code doesn't change but silence the warning. Can't do a __swab16 in this case because big endian systems would then write the wrong value. Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
Dave Switzer <david.switzer@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Jesse Brandeburg authored
The igb driver was trying hard to be sparse correct, but somehow ended up converting a variable into little endian order and then tries to OR something with it. A much plainer way of doing things is to leave all variables and OR operations in CPU (non-endian) mode, and then convert to little endian only once, which is what this change does. This probably fixes a bug that might have been seen only on big endian systems. Signed-off-by:
-
Jesse Brandeburg authored
The sparse build (C=2) finds some issues with how the driver dealt with the (very difficult) hardware that in some generations uses little-endian, and in others uses big endian, for the VLAN field. The code as written picks __le16 as a type and for some hardware revisions we override it to __be16 as done in this patch. This impacted the VF driver as well so fix it there too. Also change the vlan_tci assignment to override the sparse warning without changing functionality. Signed-off-by:
-
Jesse Brandeburg authored
The igb and igc driver both use a trick of creating a local type pointer on the stack to ease dealing with a receive descriptor in 64 bit chunks for printing. Sparse however was not taken into account and receive descriptors are always in little endian order, so just make the unions use __le64 instead of u64. No functional change. Signed-off-by:
Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Tested-by:
-
Jesse Brandeburg authored
The error check and set_bit are placed in such a way that sparse (C=2) warns: .../fm10k_pci.c:1395:9: warning: context imbalance in 'fm10k_msix_mbx_pf' - different lock contexts for basic block Which seems a little odd, but the code can obviously be moved to where the variable is being set without changing functionality at all, and it even seems to make a bit more sense with the check closer to the set. Signed-off-by:
-
Jesse Brandeburg authored
The sparse checker (C=2) found an assignment where we were mixing types when trying to convert from data read directly from the device NVM, to an array in CPU order in-memory, which unfortunately the driver tries to do in-place. This is easily solved by using the swap operation instead of an assignment, and is already proven in other Intel drivers to be functionally correct and the same code, just without a sparse warning. The change is the same in all three drivers. Signed-off-by:
-
Jesse Brandeburg authored
Sparse tool was warning on some implicit conversions from little endian data read from the EEPROM on the e100 cards. Fix these by being explicit about the conversions using le16_to_cpu(). Signed-off-by:
-
- 25 May, 2021 11 commits
-
-
Loic Poulain authored
Add index sysfs attribute for WWAN devices. This index is used to uniquely indentify and reference a WWAN device. 'index' is the attribute name that other device classes use (wireless, v4l2-dev, rfkill, etc...). Signed-off-by:
Loic Poulain <loic.poulain@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Guangbin Huang says: ==================== net: wan: clean up some code style issues This patchset clean up some code style issues. ==================== Signed-off-by: -
Peng Li authored
This patch adds spaces required around that ':' and '+'. Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
-
Peng Li authored
According to the chackpatch.pl, comparison to NULL could be written "!card". Signed-off-by:
-
Peng Li authored
Add space required after that close brace '}'. Add space required before the open parenthesis '(' and '{' Signed-off-by: -
Peng Li authored
Fix the checkpatch error as "foo* bar" and should be "foo *bar". Signed-off-by:
-
Peng Li authored
This patch fixes the checkpatch error about missing a blank line after declarations. Signed-off-by:
-
Peng Li authored
This patch removes some redundant blank lines. Signed-off-by:
-
Jiapeng Chong authored
Eliminate the follow smatch warning: drivers/net/hamradio/6pack.c:728 sixpack_ioctl() warn: inconsistent indenting. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Huazhong Tan authored
The Linux kernel has support for a dynamic interrupt moderation algorithm known as "dimlib". Replace the custom driver-specific implementation of dynamic interrupt moderation with the kernel's algorithm. Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Nigel Christian authored
The variable br is assigned a value that is not being read after exiting case IFLA_STATS_LINK_XSTATS_SLAVE. The assignment is redundant and can be removed. Addresses-Coverity ("Unused value") Signed-off-by:Nigel Christian <nigel.l.christian@gmail.com> Signed-off-by:
-
- 24 May, 2021 22 commits
-
-
David S. Miller authored
Guangbin Huang says: ==================== net: wan: clean up some code style issues This patchset clean up some code style issues. ==================== Signed-off-by: -
Peng Li authored
Braces {} should be used on all arms of this statement. Signed-off-by: -
Peng Li authored
Block comments use * on subsequent lines. Block comments use a trailing */ on a separate line. Signed-off-by:
-
Peng Li authored
According to the chackpatch.pl, comparison to NULL could be written "!card". Signed-off-by:
-
Peng Li authored
Should not use assignment in if condition. Signed-off-by:
-
Peng Li authored
Add space required after that close brace '}'. Add space required before the open parenthesis '('. Signed-off-by: -
Peng Li authored
Trailing statements should be on next line. Signed-off-by:
-
Peng Li authored
Code indent should use tabs where possible. Signed-off-by:
-
Peng Li authored
This patch fixes the checkpatch error about missing a blank line after declarations. Signed-off-by:
-
Peng Li authored
Fix the checkpatch error as "foo* bar" and should be "foo *bar", and "(foo*)" should be "(foo *)". Signed-off-by:
-
Peng Li authored
This patch removes some redundant blank lines. Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== SJA1105 DSA driver preparation for new switch introduction (SJA1110) This series contains refactoring patches which are necessary before the support for the new NXP SJA1110 switch can be introduced in this driver. As far as this series is concerned, here is the list of major changes introduced with the SJA1110: - 11 ports vs 5 - port 0 goes to the internal microcontroller, so it is unused as far as DSA is concerned - the Clock Generation Unit does not need any configuration for setting up the PLLs for MII/RMII/RGMII - the L2 Policing Table contains multicast policers too, not just broadcast and per-traffic class. These must be minimally initialized. - more frame buffers ==================== Signed-off-by: -
Vladimir Oltean authored
The shared frame buffer of the SJA1110 is larger than that of SJA1105, which is natural due to the fact that there are more ports. Introduce yet another property in struct sja1105_info which encodes the maximum number of 128 byte blocks that can be used for frame buffers. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
The SJA1110 policer array is similar in layout with SJA1105, except it contains one multicast policer per port at the end. Detect the presence of multicast policers based on the maximum number of supported L2 Policing Table entries, and make those policers have a shared index equal to the port's default policer. Letting the user configure these policers is not supported at the moment. Signed-off-by:
-
Vladimir Oltean authored
Using sja1105_xfer_buf results in a higher overhead and is harder to read. Signed-off-by:
-
Vladimir Oltean authored
Due to the fact that the port count is different, some static config tables have a different number of elements in SJA1105 compared to SJA1110. Such an example is the L2 Policing table, which has 45 entries in SJA1105 (one per port x traffic class, and one broadcast policer per port) and 110 entries in SJA1110 (one per port x traffic class, one broadcast and one multicast policer per port). Similarly, the MAC Configuration Table, the L2 Forwarding table, all have a different number of elements simply because the port count is different, and although this can be accounted for by looking at ds->ports, the policing table can't because of the presence of the extra multicast policers. The common denominator for the static config initializers for these tables is that they must set up all the entries within that table. So the simplest way to account for these differences in a uniform manner is to look at struct sja1105_table_ops::max_entry_count. For the sake of uniformity, this patch makes that change also for tables whose number of elements did not change in SJA1110, like the xMII Mode Parameters, the L2 Lookup Parameters, General Parameters, AVB Parameters (all of these are singleton tables with a single entry). Signed-off-by:
-
Vladimir Oltean authored
There are two distinct code paths which enter sja1105_clocking.c, one through sja1105_clocking_setup() and the other through sja1105_clocking_setup_port(): sja1105_static_config_reload sja1105_setup | | | +------------------+ | | v v sja1105_clocking_setup sja1105_adjust_port_config | | v | sja1105_clocking_setup_port <------------------+ As opposed to SJA1105, the SJA1110 does not need any configuration of the Clock Generation Unit in order for xMII ports to work. Just RGMII internal delays need to be configured, and that is done inside sja1105_clocking_setup_port for the RGMII ports. So this patch introduces the concept of a "reserved address", which the CGU configuration functions from sja1105_clocking.c must check before proceeding to do anything. The SJA1110 will have reserved addresses for the CGU PLLs for MII/RMII/RGMII. Additionally, make sja1105_clocking_setup() a function pointer so it can be overridden by the SJA1110. Even though nothing port-related needs to be done in the CGU, there are some operations such as disabling the watchdog clock which are unique to the SJA1110. Signed-off-by: -
Vladimir Oltean authored
If @port is unused, then dsa_upstream_port(ds, port) returns @port, which means we cannot assume the CPU port can be retrieved this way. The sja1105 switches support a single CPU port, so just iterate over the switch ports and stop at the first CPU port we see. Signed-off-by:
-
Vladimir Oltean authored
Introduce a SJA1105_MAX_NUM_PORTS macro which at the moment is equal to SJA1105_NUM_PORTS (5). With the introduction of SJA1110, these structures will need to hold information for up to 11 ports. Signed-off-by:
-
Vladimir Oltean authored
Do not put unused ports in the forwarding domain, and do not allocate FDB entries for dynamic address learning for them. Signed-off-by:
-
Vladimir Oltean authored
The sja1105 driver will gain support for the next-gen SJA1110 switch, which is very similar except for the fact it has more than 5 ports. So we need to replace the hardcoded SJA1105_NUM_PORTS in this driver with ds->num_ports. This patch is as mechanical as possible (save for the fact that ds->num_ports is not an integer constant expression). Signed-off-by:
-
David S. Miller authored
Huazhong Tan says: ==================== net: hns3: add two promisc mode updates This series includes two updates related to promisc mode for the HNS3 ethernet driver. ==================== Signed-off-by:
-
