- 12 Apr, 2023 1 commit
-
-
Florian Fainelli authored
The GPIO IR receiver can be used as a wake-up source for the system, document that. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
- 11 Apr, 2023 39 commits
-
-
Alexander Stein authored
Also dev_err_probe message require a trailing \n. Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Sakari Ailus authored
Document the firmware file names for CCS static data for CCS, SMIA++ and SMIA devices. Signed-off-by:
-
Sakari Ailus authored
MIPI CCS uses a 16-bit MIPI manufacturer identifier for firmware filenames compared to older 8-bit identifier used by SMIA. The requested firmware files used the MIPI manufacturer ID even for SMIA compliant devices, effectively making the manufacturer ID 0. While CCS static data is a feature of CCS 1.1, it has no hardware dependencies. Making this feature available for SMIA devices helps adding support for them and avoids requesting ill-generated CCS static data file names. The files are named as: ccs/smiapp-module-vv-mmmm-rrrr.fw, ccs/smiapp-sensor-vv-mmmm-rr.fw and ccs/smia-sensor-vv-mmmm-rr.fw where vv is the manufacturer ID, mmmm is the model ID and rr or rrrr is the revision number. Signed-off-by:
-
Sakari Ailus authored
Some modules don't have any model identification information in the register address space. The driver as a SMIA++ driver attempted to use sensor information in this case. This workaround is definitely not for CCS devices. Signed-off-by:
-
Sakari Ailus authored
Read 16-bit sensor revision number if the 8-bit register has value 0. Signed-off-by:
-
Sakari Ailus authored
Add V4L2 controls (currently CAMERA_SENSOR_ROTATION and CAMERA_SENSOR_ORIENTATION) from properties. Signed-off-by:
Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by:
-
Sakari Ailus authored
No longer mirror flipping controls if the sensor is mounted upside down. This way the behaviour of the flipping controls and rotation of the sensor are aligned with the rest of the drivers. Signed-off-by:
-
Jacopo Mondi authored
The "rotation" fwnode device property is intended to allow specify the sensor's physical mounting rotation, so that it can be exposed through the read-only V4L2_CID_CAMERA_SENSOR_ROTATION control and applications can decide how to compensate for that. The imx258 driver has read-only VFLIP and HFLIP enabled, resulting in a 180 degrees image rotation being produced by the sensor. But this doesn't imply that the physical mounting rotation should match the driver's implementation. Now that the driver registers V4L2_CID_CAMERA_SENSOR_ROTATION and V4L2_CID_HFLIP/VFLIP correctly, userspace has all the required information to handle the rotation correctly, hence it is not necessary to require the 'rotation' property to be fixed to 180 degrees in DTS. Signed-off-by:
-
Jacopo Mondi authored
Register controls for V4L2_CID_HFLIP and V4L2_CID_VFLIP. The controls are registered as read-only and enabled by default, as the driver embeds a 180 degrees rotation in its programming sequences and only supports that mode of operations. Signed-off-by:
-
Sakari Ailus authored
Dongchun's e-mail mailbox is no longer available, assign the maintainership to myself. The following message to <dongchun.zhu@mediatek.com> was undeliverable. The reason for the problem: 5.1.0 - Unknown address error 550-'Relaying mail to dongchun.zhu@mediatek.com is not allowed' Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Sakari Ailus authored
Dongchun's e-mail address is no longer valid, assign the ov8856 driver to myself. Signed-off-by:
-
Bingbu Cao authored
Add more camera sensors into the supported camera sensors list to make cio2-bridge to support more camera sensors. Signed-off-by:
Bingbu Cao <bingbu.cao@intel.com> Reviewed-by:
Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by:
-
Jim Lai authored
Adding additional cropped 2592x1444 resolution for QHD output from Hi556 sensor Also implement the get_selection pad operation for the Hi556 sensor driver. The supported targets report the sensor's native size, the crop default rectangle and the crop rectangle. Signed-off-by:
Jim Lai <jim.lai@intel.com> Signed-off-by:
-
Krzysztof Kozlowski authored
The struct venus_format does not have a "opp_table" field. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Wolfram Sang authored
R-Car H3 ES1.* was only available to an internal development group and needed a lot of quirks and workarounds. These become a maintenance burden now, so our development group decided to remove upstream support and disable booting for this SoC. Public users only have ES2 onwards. Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Wolfram Sang authored
R-Car H3 ES1.* was only available to an internal development group and needed a lot of quirks and workarounds. These become a maintenance burden now, so our development group decided to remove upstream support and disable booting for this SoC. Public users only have ES2 onwards. Reviewed-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
Wolfram Sang authored
R-Car H3 ES1.* was only available to an internal development group and needed a lot of quirks and workarounds. These become a maintenance burden now, so our development group decided to remove upstream support and disable booting for this SoC. Public users only have ES2 onwards. Reviewed-by:
-
Rob Herring authored
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
-
Bingbu Cao authored
In current cio2-bridge, it is using the hid name to register software node and software node will create kobject and sysfs entry according to the node name, if there are multiple sensors and VCMs which are sharing same HID name, it will cause the software nodes registration failure: sysfs: cannot create duplicate filename '/kernel/software_nodes/dw9714' ... Call Trace: software_node_register_nodes cio2_bridge_init ... kobject_add_internal failed for dw9714 with -EEXIST, don't try to register things with the same name in the same directory. One solution is appending the sensor link(Mipi Port) in SSDB as suffix of the node name to fix this problem. Signed-off-by:
-
Laurent Pinchart authored
The v4l2_create_fwnode_links_to_pad() helper requires the sink pad passed to it to belong to a subdev. This requirement can be lifted easily. Make the function usable for non-subdev sinks, which allows using it with video_device sinks. Signed-off-by:
-
Laurent Pinchart authored
The ADV7604, ADV7611 and ADV7612 software manuals document the CP_HUE value differently: - For ADV7604 and ADV7611, the hue is specified as an unsigned 8-bit value, and calculated as (CP_HUE[7:0] * 180) / 256 - 90 with the range set to [-90°, 90°]. Additionally, the values 0x00, 0x0f and 0xff are documented as corresponding to -90°, 0° and 90° respectively. - For ADV7612, the hue is specified as a signed 8-bit value in the range [0°, 360°[ without any formula. Additionally, the value 0x00 is documented as corresponding to 0°. The ADV7604 and ADV7611 documentation is clearly wrong as the example values don't correspond to the formula. Furthermore, the [-90°, 90°] range seems incorrect as it would cover only half of the hue space. The ADV7612 documentation is better, although the range should likely be [-180°, 180°[ if the value is signed. Given that the values wrap around, this makes no difference in practice. The hue values have been verified on ADV7612 to follow the documentation. There is a high chance they do as well on ADV7604 and ADV7611. In any case, all software manuals document the register as 8-bit, so the current range of the V4L2 hue control [0, 128] is not correct. Expand it to cover the full 8-bit space, using unsigned values to avoid breaking any application that may rely on 128 being a valid value. Signed-off-by:
-
Laurent Pinchart authored
The video adjustments (contrast, brightness, saturation and hue) are ignored by default by the device when the VID_ADJ_EN bit is clear. The corresponding V4L2 controls exposed by the drivers have thus no effect. Fix this by setting the VID_ADJ_EN bit. Signed-off-by:
-
Luca Weiss authored
In some setups XSHUTDOWN is connected to DOVDD when it's unused, therefore treat the reset gpio as optional. Reviewed-by:
Luca Weiss <luca@z3ntu.xyz> Signed-off-by:
-
Luca Weiss authored
Convert the text-based dt-bindings to yaml. Changes from original txt: * Take wording for various properties from other yaml bindings, this removes e.g. volt amount from schema since it isn't really relevant and the datasheet is a better source. * Don't make reset-gpios a required property since it can be tied to DOVDD instead. Reviewed-by:
-
Luca Weiss authored
With the upcoming conversion of ov2685 to dt-schema let's complete the example so validation succeeds. At the same time fix the indentation of the port node in this example. Acked-by:
-
Jason Kim authored
In the file mc-device.c, the function media_device_register_entity_notify() does not need to have the __must_check attribute since it returns only a value of 0. Therefore, we can remove this attribute and change the function's return type. Signed-off-by:
Jason Kim <sukbeom.kim@gmail.com> Signed-off-by:
-
Wei Chen authored
hi846_init_controls doesn't clean the allocated ctrl_hdlr in case there is a failure, which causes memleak. Add v4l2_ctrl_handler_free to free the resource properly. Fixes: e8c08826 ("media: i2c: add driver for the SK Hynix Hi-846 8M pixel camera") Signed-off-by:
Wei Chen <harperchen1110@gmail.com> Reviewed-by:
Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by:
-
Ricardo Ribalda authored
It the device is probed in non-zero ACPI D state, the module identification is delayed until the first streamon. The module identification has two parts: deviceID and version. To rea the version we have to enable OTP read. This cannot be done during streamon, becase it modifies REG_MODE_SELECT. Since the driver has the same behaviour for all the module versions, do not read the module version from the sensor's OTP. Cc: stable@vger.kernel.org Fixes: 0e014f1a ("media: ov8856: support device probe in non-zero ACPI D state") Signed-off-by:
Ricardo Ribalda <ribalda@chromium.org> Signed-off-by:
-
Rob Herring authored
Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Signed-off-by:
Joe Tessler <jrt@google.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> #rockchip Acked-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> [Sakari Ailus: Drop changes for files in which they had been done already] Signed-off-by:
-
Christophe JAILLET authored
Use devm_clk_get_optional() instead of hand writing it. This saves some loC and improves the semantic. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Sakari Ailus authored
When an async notifier is unregistered, the async sub-devices in the notifier's done list will disappear with the notifier. However this is currently also done to the sub-notifiers that remain registered. Their sub-devices only need to be unbound while the async sub-devices themselves need to be returned to the sub-notifier's waiting list. Do this now. Fixes: 2cab00bb ("media: v4l: async: Allow binding notifiers to sub-devices") Signed-off-by:
-
Laurent Pinchart authored
The imx_media_of_add_csi() function is only called in its compilation unit. Make it static and don't export it. Signed-off-by:
Paul Elder <paul.elder@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
The imx_media_find_subdev_by_fwnode(), imx_media_find_subdev_by_devname(), imx_media_pipeline_csi2_channel() and imx_media_pipeline_video_device() helper functions are not used. Drop them. Signed-off-by:
-
Laurent Pinchart authored
The IMX_MEDIA_GRP_ID_CSI group ID isn't used anymore. Drop it. Signed-off-by:
-
Laurent Pinchart authored
The imx_media_subdev_bound() function is a no-op, and the async notifier .bound() operation is optional. Drop it. Signed-off-by:
-
Martin Kepplinger authored
Clean up the driver a bit by inlining the imx8mq_mipi_csi_system_enable() function to the callsites and removing the hs_settle variable from the driver state. Signed-off-by:
-
Martin Kepplinger authored
Simplify the driver by using the V4L2 subdev active state API to store the active format. Signed-off-by:
-
Alexander Stein authored
This device only supports video capture, so bail out if invalid selection type is passed. Signed-off-by:
Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by:
-
Alexander Stein authored
'field' is zero-initialized to V4L2_FIELD_ANY, which is an invalid value to return to userspace. Instead default to non-interleaving. Signed-off-by:
-
