- 07 Jun, 2017 40 commits
-
-
Punit Agrawal authored
commit 30809f55 upstream. On failing to migrate a page, soft_offline_huge_page() performs the necessary update to the hugepage ref-count. But when !hugepage_migration_supported() , unmap_and_move_hugepage() also decrements the page ref-count for the hugepage. The combined behaviour leaves the ref-count in an inconsistent state. This leads to soft lockups when running the overcommitted hugepage test from mce-tests suite. Soft offlining pfn 0x83ed600 at process virtual address 0x400000000000 soft offline: 0x83ed600: migration failed 1, type 1fffc00000008008 (uptodate|head) INFO: rcu_preempt detected stalls on CPUs/tasks: Tasks blocked on level-0 rcu_node (CPUs 0-7): P2715 (detected by 7, t=5254 jiffies, g=963, c=962, q=321) thugetlb_overco R running task 0 2715 2685 0x00000008 Call trace: dump_backtrace+0x0/0x268 show_stack+0x24/0x30 sched_show_task+0x134/0x180 rcu_print_detail_task_stall_rnp+0x54/0x7c rcu_check_callbacks+0xa74/0xb08 update_process_times+0x34/0x60 tick_sched_handle.isra.7+0x38/0x70 tick_sched_timer+0x4c/0x98 __hrtimer_run_queues+0xc0/0x300 hrtimer_interrupt+0xac/0x228 arch_timer_handler_phys+0x3c/0x50 handle_percpu_devid_irq+0x8c/0x290 generic_handle_irq+0x34/0x50 __handle_domain_irq+0x68/0xc0 gic_handle_irq+0x5c/0xb0 Address this by changing the putback_active_hugepage() in soft_offline_huge_page() to putback_movable_pages(). This only triggers on systems that enable memory failure handling (ARCH_SUPPORTS_MEMORY_FAILURE) but not hugepage migration (!ARCH_ENABLE_HUGEPAGE_MIGRATION). I imagine this wasn't triggered as there aren't many systems running this configuration. [akpm@linux-foundation.org: remove dead comment, per Naoya] Link: http://lkml.kernel.org/r/20170525135146.32011-1-punit.agrawal@arm.comReported-by:
Manoj Iyer <manoj.iyer@canonical.com> Tested-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
Punit Agrawal <punit.agrawal@arm.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ross Zwisler authored
commit e2093926 upstream. We currently have two related PMD vs PTE races in the DAX code. These can both be easily triggered by having two threads reading and writing simultaneously to the same private mapping, with the key being that private mapping reads can be handled with PMDs but private mapping writes are always handled with PTEs so that we can COW. Here is the first race: CPU 0 CPU 1 (private mapping write) __handle_mm_fault() create_huge_pmd() - FALLBACK handle_pte_fault() passes check for pmd_devmap() (private mapping read) __handle_mm_fault() create_huge_pmd() dax_iomap_pmd_fault() inserts PMD dax_iomap_pte_fault() does a PTE fault, but we already have a DAX PMD installed in our page tables at this spot. Here's the second race: CPU 0 CPU 1 (private mapping read) __handle_mm_fault() passes check for pmd_none() create_huge_pmd() dax_iomap_pmd_fault() inserts PMD (private mapping write) __handle_mm_fault() create_huge_pmd() - FALLBACK (private mapping read) __handle_mm_fault() passes check for pmd_none() create_huge_pmd() handle_pte_fault() dax_iomap_pte_fault() inserts PTE dax_iomap_pmd_fault() inserts PMD, but we already have a PTE at this spot. The core of the issue is that while there is isolation between faults to the same range in the DAX fault handlers via our DAX entry locking, there is no isolation between faults in the code in mm/memory.c. This means for instance that this code in __handle_mm_fault() can run: if (pmd_none(*vmf.pmd) && transparent_hugepage_enabled(vma)) { ret = create_huge_pmd(&vmf); But by the time we actually get to run the fault handler called by create_huge_pmd(), the PMD is no longer pmd_none() because a racing PTE fault has installed a normal PMD here as a parent. This is the cause of the 2nd race. The first race is similar - there is the following check in handle_pte_fault(): } else { /* See comment in pte_alloc_one_map() */ if (pmd_devmap(*vmf->pmd) || pmd_trans_unstable(vmf->pmd)) return 0; So if a pmd_devmap() PMD (a DAX PMD) has been installed at vmf->pmd, we will bail and retry the fault. This is correct, but there is nothing preventing the PMD from being installed after this check but before we actually get to the DAX PTE fault handlers. In my testing these races result in the following types of errors: BUG: Bad rss-counter state mm:ffff8800a817d280 idx:1 val:1 BUG: non-zero nr_ptes on freeing mm: 15 Fix this issue by having the DAX fault handlers verify that it is safe to continue their fault after they have taken an entry lock to block other racing faults. [ross.zwisler@linux.intel.com: improve fix for colliding PMD & PTE entries] Link: http://lkml.kernel.org/r/20170526195932.32178-1-ross.zwisler@linux.intel.com Link: http://lkml.kernel.org/r/20170522215749.23516-2-ross.zwisler@linux.intel.comSigned-off-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Reported-by:
Pawel Lebioda <pawel.lebioda@intel.com> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Pawel Lebioda <pawel.lebioda@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Xiong Zhou <xzhou@redhat.com> Cc: Eryu Guan <eguan@redhat.com> Signed-off-by:
-
Ross Zwisler authored
commit d0f0931d upstream. When the pmd_devmap() checks were added by 5c7fb56e ("mm, dax: dax-pmd vs thp-pmd vs hugetlbfs-pmd") to add better support for DAX huge pages, they were all added to the end of if() statements after existing pmd_trans_huge() checks. So, things like: - if (pmd_trans_huge(*pmd)) + if (pmd_trans_huge(*pmd) || pmd_devmap(*pmd)) When further checks were added after pmd_trans_unstable() checks by commit 7267ec00 ("mm: postpone page table allocation until we have page to map") they were also added at the end of the conditional: + if (pmd_trans_unstable(fe->pmd) || pmd_devmap(*fe->pmd)) This ordering is fine for pmd_trans_huge(), but doesn't work for pmd_trans_unstable(). This is because DAX huge pages trip the bad_pmd() check inside of pmd_none_or_trans_huge_or_clear_bad() (called by pmd_trans_unstable()), which prints out a warning and returns 1. So, we do end up doing the right thing, but only after spamming dmesg with suspicious looking messages: mm/pgtable-generic.c:39: bad pmd ffff8808daa49b88(84000001006000a5) Reorder these checks in a helper so that pmd_devmap() is checked first, avoiding the error messages, and add a comment explaining why the ordering is important. Fixes: commit 7267ec00 ("mm: postpone page table allocation until we have page to map") Link: http://lkml.kernel.org/r/20170522215749.23516-1-ross.zwisler@linux.intel.comSigned-off-by:
-
Tetsuo Handa authored
commit c288983d upstream. Roman Gushchin has reported that the OOM killer can trivially selects next OOM victim when a thread doing memory allocation from page fault path was selected as first OOM victim. allocate invoked oom-killer: gfp_mask=0x14280ca(GFP_HIGHUSER_MOVABLE|__GFP_ZERO), nodemask=(null), order=0, oom_score_adj=0 allocate cpuset=/ mems_allowed=0 CPU: 1 PID: 492 Comm: allocate Not tainted 4.12.0-rc1-mm1+ #181 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Call Trace: oom_kill_process+0x219/0x3e0 out_of_memory+0x11d/0x480 __alloc_pages_slowpath+0xc84/0xd40 __alloc_pages_nodemask+0x245/0x260 alloc_pages_vma+0xa2/0x270 __handle_mm_fault+0xca9/0x10c0 handle_mm_fault+0xf3/0x210 __do_page_fault+0x240/0x4e0 trace_do_page_fault+0x37/0xe0 do_async_page_fault+0x19/0x70 async_page_fault+0x28/0x30 ... Out of memory: Kill process 492 (allocate) score 899 or sacrifice child Killed process 492 (allocate) total-vm:2052368kB, anon-rss:1894576kB, file-rss:4kB, shmem-rss:0kB allocate: page allocation failure: order:0, mode:0x14280ca(GFP_HIGHUSER_MOVABLE|__GFP_ZERO), nodemask=(null) allocate cpuset=/ mems_allowed=0 CPU: 1 PID: 492 Comm: allocate Not tainted 4.12.0-rc1-mm1+ #181 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Call Trace: __alloc_pages_slowpath+0xd32/0xd40 __alloc_pages_nodemask+0x245/0x260 alloc_pages_vma+0xa2/0x270 __handle_mm_fault+0xca9/0x10c0 handle_mm_fault+0xf3/0x210 __do_page_fault+0x240/0x4e0 trace_do_page_fault+0x37/0xe0 do_async_page_fault+0x19/0x70 async_page_fault+0x28/0x30 ... oom_reaper: reaped process 492 (allocate), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB ... allocate invoked oom-killer: gfp_mask=0x0(), nodemask=(null), order=0, oom_score_adj=0 allocate cpuset=/ mems_allowed=0 CPU: 1 PID: 492 Comm: allocate Not tainted 4.12.0-rc1-mm1+ #181 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Call Trace: oom_kill_process+0x219/0x3e0 out_of_memory+0x11d/0x480 pagefault_out_of_memory+0x68/0x80 mm_fault_error+0x8f/0x190 ? handle_mm_fault+0xf3/0x210 __do_page_fault+0x4b2/0x4e0 trace_do_page_fault+0x37/0xe0 do_async_page_fault+0x19/0x70 async_page_fault+0x28/0x30 ... Out of memory: Kill process 233 (firewalld) score 10 or sacrifice child Killed process 233 (firewalld) total-vm:246076kB, anon-rss:20956kB, file-rss:0kB, shmem-rss:0kB There is a race window that the OOM reaper completes reclaiming the first victim's memory while nothing but mutex_trylock() prevents the first victim from calling out_of_memory() from pagefault_out_of_memory() after memory allocation for page fault path failed due to being selected as an OOM victim. This is a side effect of commit 9a67f648 ("mm: consolidate GFP_NOFAIL checks in the allocator slowpath") because that commit silently changed the behavior from /* Avoid allocations with no watermarks from looping endlessly */ to /* * Give up allocations without trying memory reserves if selected * as an OOM victim */ in __alloc_pages_slowpath() by moving the location to check TIF_MEMDIE flag. I have noticed this change but I didn't post a patch because I thought it is an acceptable change other than noise by warn_alloc() because !__GFP_NOFAIL allocations are allowed to fail. But we overlooked that failing memory allocation from page fault path makes difference due to the race window explained above. While it might be possible to add a check to pagefault_out_of_memory() that prevents the first victim from calling out_of_memory() or remove out_of_memory() from pagefault_out_of_memory(), changing pagefault_out_of_memory() does not suppress noise by warn_alloc() when allocating thread was selected as an OOM victim. There is little point with printing similar backtraces and memory information from both out_of_memory() and warn_alloc(). Instead, if we guarantee that current thread can try allocations with no watermarks once when current thread looping inside __alloc_pages_slowpath() was selected as an OOM victim, we can follow "who can use memory reserves" rules and suppress noise by warn_alloc() and prevent memory allocations from page fault path from calling pagefault_out_of_memory(). If we take the comment literally, this patch would do - if (test_thread_flag(TIF_MEMDIE)) - goto nopage; + if (alloc_flags == ALLOC_NO_WATERMARKS || (gfp_mask & __GFP_NOMEMALLOC)) + goto nopage; because gfp_pfmemalloc_allowed() returns false if __GFP_NOMEMALLOC is given. But if I recall correctly (I couldn't find the message), the condition is meant to apply to only OOM victims despite the comment. Therefore, this patch preserves TIF_MEMDIE check. Fixes: 9a67f648 ("mm: consolidate GFP_NOFAIL checks in the allocator slowpath") Link: http://lkml.kernel.org/r/201705192112.IAF69238.OQOHSJLFOFFMtV@I-love.SAKURA.ne.jpSigned-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by:
Roman Gushchin <guro@fb.com> Tested-by:
Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by:
-
Takashi Iwai authored
commit 617163fc upstream. A mixer element created in a quirk for Tascam US-16x08 contains a typo: it should be "EQ MidLow Q" instead of "EQ MidQLow Q". Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195875 Fixes: d2bb390a ("ALSA: usb-audio: Tascam US-16x08 DSP mixer quirk") Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 64188cfb upstream. This reverts commit 89b593c3 ("ALSA: usb-audio: purge needless variable length array"). The patch turned out to cause a severe regression, triggering an Oops at snd_usb_ctl_msg(). It was overseen that snd_usb_ctl_msg() writes back the response to the given buffer, while the patch changed it to a read-only const buffer. (One should always double-check when an extra pointer cast is present...) As a simple fix, just revert the affected commit. It was merely a cleanup. Although it brings VLA again, it's clearer as a fix. We'll address the VLA later in another patch. Fixes: 89b593c3 ("ALSA: usb-audio: purge needless variable length array") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195875Signed-off-by:
-
Alexander Tsoy authored
commit 1fc2e41f upstream. This model is actually called 92XXM2-8 in Windows driver. But since pin configs for M22 and M28 are identical, just reuse M22 quirk. Fixes external microphone (tested) and probably docking station ports (not tested). Signed-off-by:
Alexander Tsoy <alexander@tsoy.me> Signed-off-by:
-
Takashi Iwai authored
commit fa16b69f upstream. ALC299 has no loopback mixer, but the driver still tries to add a beep control over the mixer NID which leads to the error at accessing it. This patch fixes it by properly declaring mixer_nid=0 for this codec. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195775 Fixes: 28f1f9b2 ("ALSA: hda/realtek - Add new codec ID ALC299") Signed-off-by:
-
Nicolas Iooss authored
commit ff5a2016 upstream. Commit 5b5e0928 ("lib/vsprintf.c: remove %Z support") removed some usages of format %Z but forgot "%.2Zx". This makes clang 4.0 reports a -Wformat-extra-args warning because it does not know about %Z. Replace %Z with %z. Link: http://lkml.kernel.org/r/20170520090946.22562-1-nicolas.iooss_linux@m4x.orgSigned-off-by:
Nicolas Iooss <nicolas.iooss_linux@m4x.org> Cc: Harald Welte <laforge@gnumonks.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Lyude authored
commit 3d18e337 upstream. We end up reading the interrupt register for HPD5, and then writing it to HPD6 which on systems without anything using HPD5 results in permanently disabling hotplug on one of the display outputs after the first time we acknowledge a hotplug interrupt from the GPU. This code is really bad. But for now, let's just fix this. I will hopefully have a large patch series to refactor all of this soon. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Lyude <lyude@redhat.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 58d7e3e4 upstream. Even if the vblank period would allow it, it still seems to be problematic on some cards. v2: fix logic inversion (Nils) bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868Acked-by:
-
Alex Deucher authored
commit 2275a3a2 upstream. Even if the vblank period would allow it, it still seems to be problematic on some cards. bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868Acked-by:
-
Alex Deucher authored
commit 09be4a52 upstream. Check to make sure the vblank period is long enough to support mclk switching. v2: drop needless initial assignment (Nils) bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868Acked-by:
Rex Zhu <Rex.Zhu@amd.com> Signed-off-by:
-
Ming Lei authored
commit 986f75c8 upstream. NVMe may add request into requeue list simply and not kick off the requeue if hw queues are stopped. Then blk_mq_abort_requeue_list() is called in both nvme_kill_queues() and nvme_ns_remove() for dealing with this issue. Unfortunately blk_mq_abort_requeue_list() is absolutely a race maker, for example, one request may be requeued during the aborting. So this patch just calls blk_mq_kick_requeue_list() in nvme_kill_queues() to handle this issue like what nvme_start_queues() does. Now all requests in requeue list when queues are stopped will be handled by blk_mq_kick_requeue_list() when queues are restarted, either in nvme_start_queues() or in nvme_kill_queues(). Reported-by:
Zhang Yi <yizhan@redhat.com> Reviewed-by:
Keith Busch <keith.busch@intel.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Ming Lei authored
commit 806f026f upstream. Inside nvme_kill_queues(), we have to start hw queues for draining requests in sw queues, .dispatch list and requeue list, so use blk_mq_start_hw_queues() instead of blk_mq_start_stopped_hw_queues() which only run queues if queues are stopped, but the queues may have been started already, for example nvme_start_queues() is called in reset work function. blk_mq_start_hw_queues() run hw queues in current context, instead of running asynchronously like before. Given nvme_kill_queues() is run from either remove context or reset worker context, both are fine to run hw queue directly. And the mutex of namespaces_mutex isn't a problem too becasue nvme_start_freeze() runs hw queue in this way already. Reported-by:
-
Marta Rybczynska authored
commit 0544f549 upstream. In the case of small NVMe-oF queue size (<32) we may enter a deadlock caused by the fact that the IB completions aren't sent waiting for 32 and the send queue will fill up. The error is seen as (using mlx5): [ 2048.693355] mlx5_0:mlx5_ib_post_send:3765:(pid 7273): [ 2048.693360] nvme nvme1: nvme_rdma_post_send failed with error code -12 This patch changes the way the signaling is done so that it depends on the queue depth now. The magic define has been removed completely. Signed-off-by:
Marta Rybczynska <marta.rybczynska@kalray.eu> Signed-off-by:
Samuel Jones <sjones@kalray.eu> Acked-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Jason Gerecke authored
commit 2ac97f0f upstream. The following Smatch complaint was generated in response to commit 2a6cdbdd ("HID: wacom: Introduce new 'touch_input' device"): drivers/hid/wacom_wac.c:1586 wacom_tpc_irq() error: we previously assumed 'wacom->touch_input' could be null (see line 1577) The 'touch_input' and 'pen_input' variables point to the 'struct input_dev' used for relaying touch and pen events to userspace, respectively. If a device does not have a touch interface or pen interface, the associated input variable is NULL. The 'wacom_tpc_irq()' function is responsible for forwarding input reports to a more-specific IRQ handler function. An unknown report could theoretically be mistaken as e.g. a touch report on a device which does not have a touch interface. This can be prevented by only calling the pen/touch functions are called when the pen/touch pointers are valid. Fixes: 2a6cdbdd ("HID: wacom: Introduce new 'touch_input' device") Signed-off-by:
Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by:
Ping Cheng <ping.cheng@wacom.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Bryant G. Ly authored
commit 75dbf2d3 upstream. The current code is not correctly calculating the req_lim_delta. We want to make sure vscsi->credit is always incremented when we do not send a response for the scsi op. Thus for the case where there is a successfully aborted task we need to make sure the vscsi->credit is incremented. v2 - Moves the original location of the vscsi->credit increment to a better spot. Since if we increment credit, the next command we send back will have increased req_lim_delta. But we probably shouldn't be doing that until the aborted cmd is actually released. Otherwise the client will think that it can send a new command, and we could find ourselves short of command elements. Not likely, but could happen. This patch depends on both: commit 25e78531 ("ibmvscsis: Do not send aborted task response") commit 98883f1b ("ibmvscsis: Clear left-over abort_cmd pointers") Signed-off-by:
Bryant G. Ly <bryantly@linux.vnet.ibm.com> Reviewed-by:
Michael Cyr <mikecyr@linux.vnet.ibm.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Bryant G. Ly authored
commit 98883f1b upstream. With the addition of ibmvscsis->abort_cmd pointer within commit 25e78531 ("ibmvscsis: Do not send aborted task response"), make sure to explicitly NULL these pointers when clearing DELAY_SEND flag. Do this for two cases, when getting the new new ibmvscsis descriptor in ibmvscsis_get_free_cmd() and before posting the response completion in ibmvscsis_send_messages(). Signed-off-by:
-
Artem Savkov authored
commit 0648a07c upstream. rdac_failover_get references struct rdac_controller as ctlr->ms_sdev->handler_data->ctlr for no apparent reason. Besides being inefficient this also introduces a null-pointer dereference as send_mode_select() sets ctlr->ms_sdev to NULL before calling rdac_failover_get(): [ 18.432550] device-mapper: multipath service-time: version 0.3.0 loaded [ 18.436124] BUG: unable to handle kernel NULL pointer dereference at 0000000000000790 [ 18.436129] IP: send_mode_select+0xca/0x560 [ 18.436129] PGD 0 [ 18.436130] P4D 0 [ 18.436130] [ 18.436132] Oops: 0000 [#1] SMP [ 18.436133] Modules linked in: dm_service_time sd_mod dm_multipath amdkfd amd_iommu_v2 radeon(+) i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm qla2xxx drm serio_raw scsi_transport_fc bnx2 i2c_core dm_mirror dm_region_hash dm_log dm_mod [ 18.436143] CPU: 4 PID: 443 Comm: kworker/u16:2 Not tainted 4.12.0-rc1.1.el7.test.x86_64 #1 [ 18.436144] Hardware name: IBM BladeCenter LS22 -[79013SG]-/Server Blade, BIOS -[L8E164AUS-1.07]- 05/25/2011 [ 18.436145] Workqueue: kmpath_rdacd send_mode_select [ 18.436146] task: ffff880225116a40 task.stack: ffffc90002bd8000 [ 18.436148] RIP: 0010:send_mode_select+0xca/0x560 [ 18.436148] RSP: 0018:ffffc90002bdbda8 EFLAGS: 00010246 [ 18.436149] RAX: 0000000000000000 RBX: ffffc90002bdbe08 RCX: ffff88017ef04a80 [ 18.436150] RDX: ffffc90002bdbe08 RSI: ffff88017ef04a80 RDI: ffff8802248e4388 [ 18.436151] RBP: ffffc90002bdbe48 R08: 0000000000000000 R09: ffffffff81c104c0 [ 18.436151] R10: 00000000000001ff R11: 000000000000035a R12: ffffc90002bdbdd8 [ 18.436152] R13: ffff8802248e4390 R14: ffff880225152800 R15: ffff8802248e4400 [ 18.436153] FS: 0000000000000000(0000) GS:ffff880227d00000(0000) knlGS:0000000000000000 [ 18.436154] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 18.436154] CR2: 0000000000000790 CR3: 000000042535b000 CR4: 00000000000006e0 [ 18.436155] Call Trace: [ 18.436159] ? rdac_activate+0x14e/0x150 [ 18.436161] ? refcount_dec_and_test+0x11/0x20 [ 18.436162] ? kobject_put+0x1c/0x50 [ 18.436165] ? scsi_dh_activate+0x6f/0xd0 [ 18.436168] process_one_work+0x149/0x360 [ 18.436170] worker_thread+0x4d/0x3c0 [ 18.436172] kthread+0x109/0x140 [ 18.436173] ? rescuer_thread+0x380/0x380 [ 18.436174] ? kthread_park+0x60/0x60 [ 18.436176] ret_from_fork+0x2c/0x40 [ 18.436177] Code: 49 c7 46 20 00 00 00 00 4c 89 ef c6 07 00 0f 1f 40 00 45 31 ed c7 45 b0 05 00 00 00 44 89 6d b4 4d 89 f5 4c 8b 75 a8 49 8b 45 20 <48> 8b b0 90 07 00 00 48 8b 56 10 8b 42 10 48 8d 7a 28 85 c0 0f [ 18.436192] RIP: send_mode_select+0xca/0x560 RSP: ffffc90002bdbda8 [ 18.436192] CR2: 0000000000000790 [ 18.436198] ---[ end trace 40f3e4dca1ffabdd ]--- [ 18.436199] Kernel panic - not syncing: Fatal exception [ 18.436222] Kernel Offset: disabled [-- MARK -- Thu May 18 11:45:00 2017] Fixes: 32782557 scsi_dh_rdac: switch to scsi_execute_req_flags() Signed-off-by:
Artem Savkov <asavkov@redhat.com> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Nicholas Bellinger authored
commit 25cdda95 upstream. This patch fixes a OOPs originally introduced by: commit bb048357 Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Thu Sep 5 14:54:04 2013 -0700 iscsi-target: Add sk->sk_state_change to cleanup after TCP failure which would trigger a NULL pointer dereference when a TCP connection was closed asynchronously via iscsi_target_sk_state_change(), but only when the initial PDU processing in iscsi_target_do_login() from iscsi_np process context was blocked waiting for backend I/O to complete. To address this issue, this patch makes the following changes. First, it introduces some common helper functions used for checking socket closing state, checking login_flags, and atomically checking socket closing state + setting login_flags. Second, it introduces a LOGIN_FLAGS_INITIAL_PDU bit to know when a TCP connection has dropped via iscsi_target_sk_state_change(), but the initial PDU processing within iscsi_target_do_login() in iscsi_np context is still running. For this case, it sets LOGIN_FLAGS_CLOSED, but doesn't invoke schedule_delayed_work(). The original NULL pointer dereference case reported by MNC is now handled by iscsi_target_do_login() doing a iscsi_target_sk_check_close() before transitioning to FFP to determine when the socket has already closed, or iscsi_target_start_negotiation() if the login needs to exchange more PDUs (eg: iscsi_target_do_login returned 0) but the socket has closed. For both of these cases, the cleanup up of remaining connection resources will occur in iscsi_target_start_negotiation() from iscsi_np process context once the failure is detected. Finally, to handle to case where iscsi_target_sk_state_change() is called after the initial PDU procesing is complete, it now invokes conn->login_work -> iscsi_target_do_login_rx() to perform cleanup once existing iscsi_target_sk_check_close() checks detect connection failure. For this case, the cleanup of remaining connection resources will occur in iscsi_target_do_login_rx() from delayed workqueue process context once the failure is detected. Reported-by:
Mike Christie <mchristi@redhat.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Varun Prakash <varun@chelsio.com> Signed-off-by:
-
Jiang Yi authored
commit 5e0cf5e6 upstream. There are three timing problems in the kthread usages of iscsi_target_mod: - np_thread of struct iscsi_np - rx_thread and tx_thread of struct iscsi_conn In iscsit_close_connection(), it calls send_sig(SIGINT, conn->tx_thread, 1); kthread_stop(conn->tx_thread); In conn->tx_thread, which is iscsi_target_tx_thread(), when it receive SIGINT the kthread will exit without checking the return value of kthread_should_stop(). So if iscsi_target_tx_thread() exit right between send_sig(SIGINT...) and kthread_stop(...), the kthread_stop() will try to stop an already stopped kthread. This is invalid according to the documentation of kthread_stop(). (Fix -ECONNRESET logout handling in iscsi_target_tx_thread and early iscsi_target_rx_thread failure case - nab) Signed-off-by:
Jiang Yi <jiangyilism@gmail.com> Signed-off-by:
-
Long Li authored
commit 1bad6c4a upstream. In lower layer driver's (LLD) scsi_host_template, the driver may optionally ask SCSI to allocate its private driver memory for each command, by specifying cmd_size. This memory is allocated at the end of scsi_cmnd by SCSI. Later when SCSI queues a command, the LLD can use scsi_cmd_priv to get to its private data. Some LLD, e.g. hv_storvsc, doesn't clear its private data before use. In this case, the LLD may get to stale or uninitialized data in its private driver memory. This may result in unexpected driver and hardware behavior. Fix this problem by also zeroing the private driver memory before passing them to LLD. Signed-off-by:
Long Li <longli@microsoft.com> Reviewed-by:
Bart Van Assche <Bart.VanAssche@sandisk.com> Reviewed-by:
KY Srinivasan <kys@microsoft.com> Reviewed-by:
Christoph Hellwig <hch@infradead.org> Signed-off-by:
-
Srinath Mannam authored
commit f5f968f2 upstream. The stingray SDHCI hardware supports ACMD12 and automatically issues after multi block transfer completed. If ACMD12 in SDHCI is disabled, spurious tx done interrupts are seen on multi block read command with below error message: Got data interrupt 0x00000002 even though no data operation was in progress. This patch uses SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 to enable ACM12 support in SDHCI hardware and suppress spurious interrupt. Signed-off-by:
Srinath Mannam <srinath.mannam@broadcom.com> Reviewed-by:
Ray Jui <ray.jui@broadcom.com> Reviewed-by:
Scott Branden <scott.branden@broadcom.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Fixes: b580c52d ("mmc: sdhci-iproc: add IPROC SDHCI driver") Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Benjamin Tissoires authored
commit 878d8db0 upstream. Revert commit 77e9a4aa (ACPI / button: Change default behavior to lid_init_state=open) which changed the kernel's behavior on laptops that boot with closed lids and expect the lid switch state to be reported accurately by the kernel. If you boot or resume your laptop with the lid closed on a docking station while using an external monitor connected to it, both internal and external displays will light on, while only the external should. There is a design choice in gdm to only provide the greeter on the internal display when lit on, so users only see a gray area on the external monitor. Also, the cursor will not show up as it's by default on the internal display too. To "fix" that, users have to open the laptop once and close it once again to sync the state of the switch with the hardware state. Even if the "method" operation mode implementation can be buggy on some platforms, the "open" choice is worse. It breaks docking stations basically and there is no way to have a user-space hwdb to fix that. On the contrary, it's rather easy in user-space to have a hwdb with the problematic platforms. Then, libinput (1.7.0+) can fix the state of the lid switch for us: you need to set the udev property LIBINPUT_ATTR_LID_SWITCH_RELIABILITY to 'write_open'. When libinput detects internal keyboard events, it will overwrite the state of the switch to open, making it reliable again. Given that logind only checks the lid switch value after a timeout, we can assume the user will use the internal keyboard before this timeout expires. For example, such a hwdb entry is: libinput:name:*Lid Switch*:dmi:*svnMicrosoftCorporation:pnSurface3:* LIBINPUT_ATTR_LID_SWITCH_RELIABILITY=write_open Link: https://bugzilla.gnome.org/show_bug.cgi?id=782380Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Lv Zheng authored
commit 2ea65321 upstream. In the Linux kernel, acpi_get_table() "clones" haven't been fully balanced by acpi_put_table() invocations. In upstream ACPICA, due to the design change, there are also unbalanced acpi_get_table_by_index() invocations requiring special care. acpi_get_table() reference counting mismatches may occor due to that and printing error messages related to them is not useful at this point. The strict balanced validation count check should only be enabled after confirming that all invocations are safe and aligned with their designed purposes. Thus this patch removes the error value returned by acpi_tb_get_table() in that case along with the accompanying error message to fix the issue. Fixes: 174cc718 (ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel) Reported-by:
Anush Seetharaman <anush.seetharaman@intel.com> Reported-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> [ rjw: Changelog ] Signed-off-by:
-
Dan Williams authored
commit 0de0e198 upstream. Reading an ACPI table through the /sys/firmware/acpi/tables interface more than 65,536 times leads to the following log message: ACPI Error: Table ffff88033595eaa8, Validation count is zero after increment (20170119/tbutils-423) ...and the table being unavailable until the next reboot. Add the missing acpi_put_table() so the table ->validation_count is decremented after each read. Reported-by:
-
Vishal Verma authored
commit fc08a470 upstream. The check for an MCE being a memory error in the NFIT mce handler was bogus. Use the new mce_is_memory_error() helper to detect the error properly. Reported-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Vishal Verma <vishal.l.verma@intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/20170519093915.15413-3-bp@alien8.deSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Borislav Petkov authored
commit 2d1f4061 upstream. Export the function which checks whether an MCE is a memory error to other users so that we can reuse the logic. Drop the boot_cpu_data use, while at it, as mce.cpuvendor already has the CPU vendor in there. Integrate a piece from a patch from Vishal Verma <vishal.l.verma@intel.com> to export it for modules (nfit). The main reason we're exporting it is that the nfit handler nfit_handle_mce() needs to detect a memory error properly before doing its recovery actions. Signed-off-by:
-
Lv Zheng authored
commit f369fdf4 upstream. This reverts commit ecb10b69. The only expected ACPI control method lid device's usage model is 1. Listen to the lid notification, 2. Evaluate _LID after being notified by BIOS, 3. Suspend the system (if users configure to do so) after seeing "close". It's not ensured that BIOS will notify OS after boot/resume, and it's not ensured that BIOS will always generate "open" event upon opening the lid. But there are 2 wrong usage models: 1. When the lid device is responsible for suspend/resume the system, userspace requires to see "open" event to be paired with "close" after the system is resumed, or it will suspend the system again. 2. When an external monitor connects to the laptop attached docks, userspace requires to see "close" event after the system is resumed so that it can determine whether the internal display should remain dark and the external display should be lit on. After we made default kernel behavior to be suitable for usage model 1, users of usage model 2 start to report regressions for such behavior change. Reversion of button.lid_init_state=method doesn't actually reverts to old default behavior as doing so can enter a regression loop, but facilitates users to work the reported regressions around with button.lid_init_state=method. Fixes: ecb10b69 (ACPI / button: Remove lid_init_state=method mode) Link: https://bugzilla.kernel.org/show_bug.cgi?id=195455 Link: https://bugzilla.redhat.com/show_bug.cgi?id=1430259Tested-by:
Steffen Weber <steffen.weber@gmail.com> Tested-by:
Julian Wiedmann <julian.wiedmann@jwi.name> Reported-by:
Joachim Frieben <jfrieben@hotmail.com> Signed-off-by:
-
Herbert Xu authored
commit 9933e113 upstream. The API setkey checks for key sizes and alignment went AWOL during the skcipher conversion. This patch restores them. Fixes: 4e6c3df4 ("crypto: skcipher - Add low-level skcipher...") Reported-by:
Baozeng <sploving1@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Sebastian Reichel authored
commit 5165da59 upstream. Since v4.9 i2c-tiny-usb generates the below call trace and longer works, since it can't communicate with the USB device. The reason is, that since v4.9 the USB stack checks, that the buffer it should transfer is DMA capable. This was a requirement since v2.2 days, but it usually worked nevertheless. [ 17.504959] ------------[ cut here ]------------ [ 17.505488] WARNING: CPU: 0 PID: 93 at drivers/usb/core/hcd.c:1587 usb_hcd_map_urb_for_dma+0x37c/0x570 [ 17.506545] transfer buffer not dma capable [ 17.507022] Modules linked in: [ 17.507370] CPU: 0 PID: 93 Comm: i2cdetect Not tainted 4.11.0-rc8+ #10 [ 17.508103] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 17.509039] Call Trace: [ 17.509320] ? dump_stack+0x5c/0x78 [ 17.509714] ? __warn+0xbe/0xe0 [ 17.510073] ? warn_slowpath_fmt+0x5a/0x80 [ 17.510532] ? nommu_map_sg+0xb0/0xb0 [ 17.510949] ? usb_hcd_map_urb_for_dma+0x37c/0x570 [ 17.511482] ? usb_hcd_submit_urb+0x336/0xab0 [ 17.511976] ? wait_for_completion_timeout+0x12f/0x1a0 [ 17.512549] ? wait_for_completion_timeout+0x65/0x1a0 [ 17.513125] ? usb_start_wait_urb+0x65/0x160 [ 17.513604] ? usb_control_msg+0xdc/0x130 [ 17.514061] ? usb_xfer+0xa4/0x2a0 [ 17.514445] ? __i2c_transfer+0x108/0x3c0 [ 17.514899] ? i2c_transfer+0x57/0xb0 [ 17.515310] ? i2c_smbus_xfer_emulated+0x12f/0x590 [ 17.515851] ? _raw_spin_unlock_irqrestore+0x11/0x20 [ 17.516408] ? i2c_smbus_xfer+0x125/0x330 [ 17.516876] ? i2c_smbus_xfer+0x125/0x330 [ 17.517329] ? i2cdev_ioctl_smbus+0x1c1/0x2b0 [ 17.517824] ? i2cdev_ioctl+0x75/0x1c0 [ 17.518248] ? do_vfs_ioctl+0x9f/0x600 [ 17.518671] ? vfs_write+0x144/0x190 [ 17.519078] ? SyS_ioctl+0x74/0x80 [ 17.519463] ? entry_SYSCALL_64_fastpath+0x1e/0xad [ 17.519959] ---[ end trace d047c04982f5ac50 ]--- Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by:
Till Harbaum <till@harbaum.org> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Ard Biesheuvel authored
commit 4c4fc909 upstream. Commit fa01e2ca ("serial: 8250: Integrate Fintek into 8250_base") modified the probing logic for PNP0501 devices, to remove a collision between the generic 16550A driver and the Fintek driver, which reused the same ACPI _HID. The Fintek device probe is now incorporated into the common 8250 probe path, and gets called for all discovered 16550A compatible devices, including ones that are MMIO mapped rather than IO mapped. However, the Fintek driver assumes the port base is a I/O address, and proceeds to probe some arbitrary offsets above it. This is generally a wrong thing to do, but on ARM systems (having no native port I/O), this may result in faulting accesses of completely unrelated MMIO regions in the PCI I/O space. Given that this is at serial probe time, this results in hard to diagnose crashes at boot. So let's restrict the Fintek probe to devices that we know are using port I/O in the first place. Fixes: fa01e2ca ("serial: 8250: Integrate Fintek into 8250_base") Suggested-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Ricardo Ribalda <ricardo.ribalda@gmail.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Johan Hovold authored
commit aee5da78 upstream. The port client data must be set when registering the serdev controller or client deregistration will fail (and the serdev devices are left registered and allocated) if the port was never opened in between. Make sure to clear the port client data on any probe errors to avoid a use-after-free when the client is later deregistered unconditionally (e.g. in a tty-port deregistration helper). Also move port client operation initialisation to registration. Note that the client ops must be restored on failed probe. Fixes: bed35c6d ("serdev: add a tty port controller driver") Signed-off-by:
Johan Hovold <johan@kernel.org> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit d3ba126a upstream. This reverts commit 8ee3fde0. The new serdev bus hooked into the tty layer in tty_port_register_device() by registering a serdev controller instead of a tty device whenever a serdev client is present, and by deregistering the controller in the tty-port destructor. This is broken in several ways: Firstly, it leads to a NULL-pointer dereference whenever a tty driver later deregisters its devices as no corresponding character device will exist. Secondly, far from every tty driver uses tty-port refcounting (e.g. serial core) so the serdev devices might never be deregistered or deallocated. Thirdly, deregistering at tty-port destruction is too late as the underlying device and structures may be long gone by then. A port is not released before an open tty device is closed, something which a registered serdev client can prevent from ever happening. A driver callback while the device is gone typically also leads to crashes. Many tty drivers even keep their ports around until the driver is unloaded (e.g. serial core), something which even if a late callback never happens, leads to leaks if a device is unbound from its driver and is later rebound. The right solution here is to add a new tty_port_unregister_device() helper and to never call tty_device_unregister() whenever the port has been claimed by serdev, but since this requires modifying just about every tty driver (and multiple subsystems) it will need to be done incrementally. Reverting the offending patch is the first step in fixing the broken lifetime assumptions. A follow-up patch will add a new pair of tty-device registration helpers, which a vetted tty driver can use to support serdev (initially serial core). When every tty driver uses the serdev helpers (at least for deregistration), we can add serdev registration to tty_port_register_device() again. Note that this also fixes another issue with serdev, which currently allocates and registers a serdev controller for every tty device registered using tty_port_device_register() only to immediately deregister and deallocate it when the corresponding OF node or serdev child node is missing. This should be addressed before enabling serdev for hot-pluggable buses. Signed-off-by:
-
Jeremy Kerr authored
commit d75e4919 upstream. Commit ac29c640 ("powerpc/mm: Replace _PAGE_USER with _PAGE_PRIVILEGED") swapped _PAGE_USER for _PAGE_PRIVILEGED, and introduced check_pte_access() which denied kernel access to non-_PAGE_PRIVILEGED pages. However, it didn't add _PAGE_PRIVILEGED to the hash fault handler for spufs' kernel accesses, so the DMAs required to establish SPE memory no longer work. This change adds _PAGE_PRIVILEGED to the hash fault handler for kernel accesses. Fixes: ac29c640 ("powerpc/mm: Replace _PAGE_USER with _PAGE_PRIVILEGED") Signed-off-by:
Jeremy Kerr <jk@ozlabs.org> Reported-by:
Sombat Tragolgosol <sombat3960@gmail.com> Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Michael Neuling authored
commit d957fb4d upstream. Currently if you disable CONFIG_PPC_RADIX_MMU you'll crash on boot on a P9. This is because we still set MMU_FTR_TYPE_RADIX via ibm,pa-features and MMU_FTR_TYPE_RADIX is what's used for code patching in much of the asm code (ie. slb_miss_realmode) This patch fixes the problem by stopping MMU_FTR_TYPE_RADIX from being set from ibm.pa-features. We may eventually end up removing the CONFIG_PPC_RADIX_MMU option completely but until then this fixes the issue. Fixes: 17a3dd2f ("powerpc/mm/radix: Use firmware feature to enable Radix MMU") Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
Richard Narron authored
commit 239e250e upstream. This fixes a problem with reading files larger than 2GB from a UFS-2 file system: https://bugzilla.kernel.org/show_bug.cgi?id=195721 The incorrect UFS s_maxsize limit became a problem as of commit c2a9737f ("vfs,mm: fix a dead loop in truncate_inode_pages_range()") which started using s_maxbytes to avoid a page index overflow in do_generic_file_read(). That caused files to be truncated on UFS-2 file systems because the default maximum file size is 2GB (MAX_NON_LFS) and UFS didn't update it. Here I simply increase the default to a common value used by other file systems. Signed-off-by:
Richard Narron <comet.berkeley@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will B <will.brokenbourgh2877@gmail.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Liam R. Howlett authored
[ Upstream commit 48078d2d ] The ftrace function_graph time measurements of a given function is not accurate according to those recorded by ftrace using the function filters. This change pulls the x86_64 fix from 'commit 722b3c74 ("ftrace/graph: Trace function entry before updating index")' into the sparc specific prepare_ftrace_return which stops ftrace from counting interrupted tasks in the time measurement. Example measurements for select_task_rq_fair running "hackbench 100 process 1000": | tracing/trace_stat/function0 | function_graph Before patch | 2.802 us | 4.255 us After patch | 2.749 us | 3.094 us Signed-off-by:
Liam R. Howlett <Liam.Howlett@Oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Orlando Arias authored
[ Upstream commit deba804c ] Greetings, GCC 7 introduced the -Wstringop-overflow flag to detect buffer overflows in calls to string handling functions [1][2]. Due to the way ``empty_zero_page'' is declared in arch/sparc/include/setup.h, this causes a warning to trigger at compile time in the function mem_init(), which is subsequently converted to an error. The ensuing patch fixes this issue and aligns the declaration of empty_zero_page to that of other architectures. Thank you. Cheers, Orlando. [1] https://gcc.gnu.org/ml/gcc-patches/2016-10/msg02308.html [2] https://gcc.gnu.org/gcc-7/changes.htmlSigned-off-by:
Orlando Arias <oarias@knights.ucf.edu> -------------------------------------------------------------------------------- Signed-off-by:
-
