- 31 Mar, 2020 40 commits
-
-
Rohit Maheshwari authored
Included nic tls statistics in ethtool stats. Signed-off-by:
Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King authored
Fix an oops in dsa_port_phylink_mac_change() caused by a combination of a20f9970 ("net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed") and the net-dsa-improve-serdes-integration series of patches 65b7a2c8 ("Merge branch 'net-dsa-improve-serdes-integration'"). Unable to handle kernel NULL pointer dereference at virtual address 00000124 pgd = c0004000 [00000124] *pgd=00000000 Internal error: Oops: 805 [#1] SMP ARM Modules linked in: tag_edsa spi_nor mtd xhci_plat_hcd mv88e6xxx(+) xhci_hcd armada_thermal marvell_cesa dsa_core ehci_orion libdes phy_armada38x_comphy at24 mcp3021 sfp evbug spi_orion sff mdio_i2c CPU: 1 PID: 214 Comm: irq/55-mv88e6xx Not tainted 5.6.0+ #470 Hardware name: Marvell Armada 380/385 (Device Tree) PC is at phylink_mac_change+0x10/0x88 LR is at mv88e6352_serdes_irq_status+0x74/0x94 [mv88e6xxx] Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by:
Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by:
-
Bruno Meneguele authored
A testing message was brought by 13d0f7b8 ("net/bpfilter: fix dprintf usage for /dev/kmsg") but should've been deleted before patch submission. Although it doesn't cause any harm to the code or functionality itself, it's totally unpleasant to have it displayed on every loop iteration with no real use case. Thus remove it unconditionally. Fixes: 13d0f7b8 ("net/bpfilter: fix dprintf usage for /dev/kmsg") Signed-off-by:
Bruno Meneguele <bmeneg@redhat.com> Signed-off-by:
-
Codrin Ciubotariu authored
fixed-link nodes are treated as PHY nodes by of_mdiobus_child_is_phy(). We must check if the interface is a fixed-link before looking up for PHY nodes. Fixes: 7897b071 ("net: macb: convert to phylink") Tested-by:
Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by:
Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by:
-
Codrin Ciubotariu authored
KSZ protocol tag is needed by the KSZ DSA drivers. Fixes: 0b9f9dfb ("dsa: Allow tag drivers to be built as modules") Tested-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
-
Gustavo A. R. Silva authored
In case memory resources for dummy_data were allocated, release them before return. Addresses-Coverity-ID: 1491997 ("Resource leak") Fixes: 7ef19d3b ("devlink: report error once U32_MAX snapshot ids have been used") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
David S. Miller authored
Voon Weifeng says: ==================== stmmac: Add additional EHL PCI info and PCI ID Thanks Jose Miguel Abreu for the feedback. Summary of v2 patches: 1/3: As suggested to keep the stmmac_pci.c file simple. So created a new file dwmac-intel.c and moved all the Intel specific PCI device out of stmmac_pci.c. 2/3: Added Intel(R) Programmable Services Engine (Intel(R) PSE) MAC PCI ID and PCI info 3/3: Added EHL 2.5Gbps PCI ID and info Changes from v1: -Added a patch to move all Intel specific PCI device from stmmac_pci.c to a new file named dwmac-intel.c. -Combine v1 patch 1/3 and 2/3 into single patch. ==================== Signed-off-by: -
Voon Weifeng authored
Add EHL SGMII 2.5Gbps PCI info and PCI ID Signed-off-by:
Voon Weifeng <weifeng.voon@intel.com> Signed-off-by:
-
Voon Weifeng authored
Add EHL PSE0/1 RGMII & SGMII 1Gbps PCI info and PCI ID Signed-off-by:
Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by:
-
Voon Weifeng authored
As stmmac_pci.c file is getting bigger and more complex, it is reasonable to separate all the Intel specific dwmac pci device to a different file. This move includes Intel Quark, TGL and EHL. A new kernel config CONFIG_DWMAC_INTEL is introduced and depends on X86. For this initial patch, all the necessary function such as probe() and exit() are identical besides the function name. Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: dsa: b53 & bcm_sf2 updates for 7278 This patch series contains some updates to the b53 and bcm_sf2 drivers specifically for the 7278 Ethernet switch. The first patch is technically a bug fix so it should ideally be backported to -stable, provided that Dan also agress with my resolution on this. Patches #2 through #4 are minor changes to the core b53 driver to restore VLAN configuration upon system resumption as well as deny specific bridge/VLAN operations on port 7 with the 7278 which is special and does not support VLANs. Patches #5 through #9 add support for matching VLAN TCI keys/masks to the CFP code. Changes in v2: - fixed some code comments and arrange some code for easier reading ==================== Signed-off-by: -
Florian Fainelli authored
The port to which the ASP is connected on 7278 is not capable of processing VLAN tags as part of the Ethernet frame, so allow an user to configure the egress VLAN policy they want to see applied by purposing the h_ext.data[1] field. Bit 0 is used to indicate that 0=tagged, 1=untagged. Signed-off-by:
-
Florian Fainelli authored
Update relevant code paths to support the programming and matching of VLAN TCI, this is the only member of the ethtool_flow_ext that we can match, the switch does not permit matching the VLAN Ethernet Type field. Signed-off-by:
-
Florian Fainelli authored
In preparation for matching VLANs, move the writing of CFP_DATA(5) into the IPv4 and IPv6 slicing logic since they are part of the per-flow configuration. Signed-off-by:
-
Florian Fainelli authored
We do not currently support matching on FLOW_EXT or FLOW_MAC_EXT, but we were not checking for those bits being set in the flow specification. The check for FLOW_EXT and FLOW_MAC_EXT are separated out because a subsequent commit will add support for matching VLAN TCI which are covered by FLOW_EXT. Signed-off-by:
-
Florian Fainelli authored
We don't want to enable learning for the ASP port since it only receives directed traffic, this allows us to bypass ARL-driven forwarding rules which could conflict with Broadcom tags and/or CFP forwarding. Signed-off-by:
-
Florian Fainelli authored
On 7278, port 7 connects to the ASP which should only receive frames through the use of CFP rules, it is not desirable to have it be part of a bridge at all since that would make it pick up unwanted traffic that it may not even be able to filter or sustain. Signed-off-by:
-
Florian Fainelli authored
On 7278, port 7 of the switch connects to the ASP UniMAC which is not capable of processing VLAN tagged frames. We can still allow the port to be part of a VLAN entry, and we may want it to be untagged on egress on that VLAN because of that limitation. Signed-off-by:
-
Florian Fainelli authored
The first time b53_configure_vlan() is called we have not configured any VLAN entries yet, since that happens later when interfaces get brought up. When b53_configure_vlan() is called again from suspend/resume we need to restore all VLAN entries though. Signed-off-by:
-
Florian Fainelli authored
Commit f949a12f ("net: dsa: bcm_sf2: fix buffer overflow doing set_rxnfc") tried to fix the some user controlled buffer overflows in bcm_sf2_cfp_rule_set() and bcm_sf2_cfp_rule_del() but the fix was using CFP_NUM_RULES, which while it is correct not to overflow the bitmaps, is not representative of what the device actually supports. Correct that by using bcm_sf2_cfp_rule_size() instead. The latter subtracts the number of rules by 1, so change the checks from greater than or equal to greater than accordingly. Fixes: f949a12f ("net: dsa: bcm_sf2: fix buffer overflow doing set_rxnfc") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Signed-off-by: -
Haiyang Zhang authored
The vzalloc_node(), already rounds the total size to whole pages, and sizeof(u64) is smaller than sizeof(struct recv_comp_data). So round_up of recv_completion_cnt is not necessary, and may cause extra memory allocation. To save memory, remove this unnecessary round_up for recv_completion_cnt. Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for net-next: 1) Add support to specify a stateful expression in set definitions, this allows users to specify e.g. counters per set elements. 2) Flowtable software counter support. 3) Flowtable hardware offload counter support, from wenxu. 3) Parallelize flowtable hardware offload requests, from Paul Blakey. This includes a patch to add one work entry per offload command. 4) Several patches to rework nf_queue refcount handling, from Florian Westphal. 4) A few fixes for the flowtable tunnel offload: Fix crash if tunneling information is missing and set up indirect flow block as TC_SETUP_FT, patch from wenxu. 5) Stricter netlink attribute sanity check on filters, from Romain Bellan and Florent Fourcot. 5) Annotations to make sparse happy, from Jules Irenge. 6) Improve icmp errors in debugging information, from Haishuang Yan. 7) Fix warning in IPVS icmp error debugging, from Haishuang Yan. 8) Fix endianess issue in tcp extension header, from Sergey Marinkevich. ==================== Signed-off-by: -
David S. Miller authored
Ido Schimmel says: ==================== Add packet trap policers support Background ========== Devices capable of offloading the kernel's datapath and perform functions such as bridging and routing must also be able to send (trap) specific packets to the kernel (i.e., the CPU) for processing. For example, a device acting as a multicast-aware bridge must be able to trap IGMP membership reports to the kernel for processing by the bridge module. Motivation ========== In most cases, the underlying device is capable of handling packet rates that are several orders of magnitude higher compared to those that can be handled by the CPU. Therefore, in order to prevent the underlying device from overwhelming the CPU, devices usually include packet trap policers that are able to police the trapped packets to rates that can be handled by the CPU. Proposed solution ================= This patch set allows capable device drivers to register their supported packet trap policers with devlink. User space can then tune the parameters of these policers (currently, rate and burst size) and read from the device the number of packets that were dropped by the policer, if supported. These packet trap policers can then be bound to existing packet trap groups, which are used to aggregate logically related packet traps. As a result, trapped packets are policed to rates that can be handled the host CPU. Example usage ============= Instantiate netdevsim: Dump available packet trap policers: netdevsim/netdevsim10: policer 1 rate 1000 burst 128 policer 2 rate 2000 burst 256 policer 3 rate 3000 burst 512 Change the parameters of a packet trap policer: Bind a packet trap policer to a packet trap group: Dump parameters and statistics of a packet trap policer: netdevsim/netdevsim10: policer 3 rate 100 burst 16 stats: rx: dropped 92 Unbind a packet trap policer from a packet trap group: Patch set overview ================== Patch #1 adds the core infrastructure in devlink which allows capable device drivers to register their supported packet trap policers with devlink. Patch #2 extends the existing devlink-trap documentation. Patch #3 extends netdevsim to register a few dummy packet trap policers with devlink. Used later on to selftests the core infrastructure. Patches #4-#5 adds infrastructure in devlink to allow binding of packet trap policers to packet trap groups. Patch #6 extends netdevsim to allow such binding. Patch #7 adds a selftest over netdevsim that verifies the core devlink-trap policers functionality. Patches #8-#14 gradually add devlink-trap policers support in mlxsw. Patch #15 adds a selftest over mlxsw. All registered packet trap policers are verified to handle the configured rate and burst size. Future plans ============ * Allow changing default association between packet traps and packet trap groups * Add more packet traps. For example, for control packets (e.g., IGMP) v3: * Rebase v2 (address comments from Jiri and Jakub): * Patch #1: Add 'strict_start_type' in devlink policy * Patch #1: Have device drivers provide max/min rate/burst size for each policer. Use them to check validity of user provided parameters * Patch #3: Remove check about burst size being a power of 2 and instead add a debugfs knob to fail the operation * Patch #3: Provide max/min rate/burst size when registering policers and remove the validity checks from nsim_dev_devlink_trap_policer_set() * Patch #5: Check for presence of 'DEVLINK_ATTR_TRAP_POLICER_ID' in devlink_trap_group_set() and bail if not present * Patch #5: Add extack error message in case trap group was partially modified * Patch #7: Add test case with new 'fail_trap_policer_set' knob * Patch #7: Add test case for partially modified trap group * Patch #10: Provide max/min rate/burst size when registering policers * Patch #11: Remove the max/min validity checks from __mlxsw_sp_trap_policer_set() ==================== Signed-off-by: -
Ido Schimmel authored
Add test cases that verify that each registered packet trap policer: * Honors that imposed limitations of rate and burst size * Able to police trapped packets to the specified rate * Able to police trapped packets to the specified burst size * Able to be unbound from its trap group Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
Implement support for setting of packet trap group parameters by invoking the trap_group_init() callback with the new parameters. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
Some packet traps are currently exposed to user space as being member of "l3_drops" trap group, but internally they are member of a different group. Switch these traps to use the correct group so that they are all subject to the same policer, as exposed to user space. Set the trap priority of packets trapped due to loopback error during routing to the lowest priority. Such packets are not routed again by the kernel and therefore should not mask other traps (e.g., host miss) that should be routed. Signed-off-by:
-
Ido Schimmel authored
The policer is now initialized as part of the registration with devlink, so there is no need to initialize it before the registration. Remove the initialization. Signed-off-by:
-
Ido Schimmel authored
Register supported packet trap policers with devlink and implement callbacks to change their parameters and read their counters. Prevent user space from passing invalid policer parameters down to the device by checking their validity and communicating the failure via an appropriate extack message. v2: * Remove the max/min validity checks from __mlxsw_sp_trap_policer_set() Signed-off-by:
-
Ido Schimmel authored
Prepare an array of policer IDs to register with devlink and their associated parameters. The array is composed from both policers that are currently bound to exposed trap groups and policers that are not bound to any trap group. v2: * Provide max/min rate/burst size when registering policers Signed-off-by:
-
Ido Schimmel authored
During initialization the driver configures various packet trap groups and binds policers to them. Currently, most of these groups are not exposed to user space and therefore their policers should not be exposed as well. Otherwise, user space will be able to alter policer parameters without knowing which packet traps are policed by the policer. Use a bitmap to track the used policer IDs so that these policers will not be registered with devlink in a subsequent patch. Signed-off-by:
-
Ido Schimmel authored
The QoS Policer Configuration Register (QPCR) is used to configure hardware policers. Extend this register with following fields and defines which will be used by subsequent patches: 1. Violate counter: reads number of packets dropped by the policer 2. Clear counter: to ensure we start counting from 0 3. Rate and burst size limits Signed-off-by:
-
Ido Schimmel authored
Add test cases for packet trap policer set / show commands as well as for the binding of these policers to packet trap groups. Both good and bad flows are tested for maximum coverage. v2: * Add test case with new 'fail_trap_policer_set' knob * Add test case for partially modified trap group Signed-off-by:
-
Ido Schimmel authored
Add a dummy callback to set trap group parameters. Return an error when the 'fail_trap_group_set' debugfs file is set in order to exercise error paths and verify that error is propagated to user space when should. Signed-off-by:
-
Ido Schimmel authored
The previous patch allowed device drivers to publish their default binding between packet trap policers and packet trap groups. However, some users might not be content with this binding and would like to change it. In case user space passed a packet trap policer identifier when setting a packet trap group, invoke the appropriate device driver callback and pass the new policer identifier. v2: * Check for presence of 'DEVLINK_ATTR_TRAP_POLICER_ID' in devlink_trap_group_set() and bail if not present * Add extack error message in case trap group was partially modified Signed-off-by:
-
Ido Schimmel authored
Packet trap groups are used to aggregate logically related packet traps. Currently, these groups allow user space to batch operations such as setting the trap action of all member traps. In order to prevent the CPU from being overwhelmed by too many trapped packets, it is desirable to bind a packet trap policer to these groups. For example, to limit all the packets that encountered an exception during routing to 10Kpps. Allow device drivers to bind default packet trap policers to packet trap groups when the latter are registered with devlink. The next patch will enable user space to change this default binding. Signed-off-by:
-
Ido Schimmel authored
Register three dummy packet trap policers with devlink and implement callbacks to change their parameters and read their counters. This will be used later on in the series to test the devlink-trap policer infrastructure. v2: * Remove check about burst size being a power of 2 and instead add a debugfs knob to fail the operation * Provide max/min rate/burst size when registering policers and remove the validity checks from nsim_dev_devlink_trap_policer_set() Signed-off-by:
-
Ido Schimmel authored
Extend devlink-trap documentation with information about packet trap policers. Signed-off-by:
-
Ido Schimmel authored
Devices capable of offloading the kernel's datapath and perform functions such as bridging and routing must also be able to send (trap) specific packets to the kernel (i.e., the CPU) for processing. For example, a device acting as a multicast-aware bridge must be able to trap IGMP membership reports to the kernel for processing by the bridge module. In most cases, the underlying device is capable of handling packet rates that are several orders of magnitude higher compared to those that can be handled by the CPU. Therefore, in order to prevent the underlying device from overwhelming the CPU, devices usually include packet trap policers that are able to police the trapped packets to rates that can be handled by the CPU. This patch allows capable device drivers to register their supported packet trap policers with devlink. User space can then tune the parameters of these policer (currently, rate and burst size) and read from the device the number of packets that were dropped by the policer, if supported. Subsequent patches in the series will allow device drivers to create default binding between these policers and packet trap groups and allow user space to change the binding. v2: * Add 'strict_start_type' in devlink policy * Have device drivers provide max/min rate/burst size for each policer. Use them to check validity of user provided parameters Signed-off-by:
-
