- 04 Jan, 2014 4 commits
-
-
Shahed Shaikh authored
o Driver is using common tx_clean_lock for all Tx queues. This patch adds per queue tx_clean_lock. o Driver is not updating sw_consumer while processing Tx completion when interface is going down. Fixed in this patch. Signed-off-by:
Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by:
Manish Chopra <manish.chopra@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hangbin Liu authored
When we create a new infiniband link with uninfiniband device, e.g. `ip link add link em1 type ipoib pkey 0x8001`. We will get a NULL pointer dereference cause other dev like Ethernet don't have struct ib_device. The code path is: rtnl_newlink |-- ipoib_new_child_link |-- __ipoib_vlan_add |-- ipoib_set_dev_features |-- ib_query_device Fix this bug by make sure the src net is infiniband when create new link. Signed-off-by:Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
fan.du authored
Even if user doesn't supply the physical netdev to attach vxlan dev to, and at the same time user want to vxlan sit top of IPv6, mark vxlan_dev flags with VXLAN_F_IPV6 to create IPv6 based socket. Otherwise kernel crashes safely every time spitting below messages, Steps to reproduce: ip link add vxlan0 type vxlan id 42 group ff0e::110 ip link set vxlan0 up [ 62.656266] BUG: unable to handle kernel NULL pointer dereference[ 62.656320] ip (3008) used greatest stack depth: 3912 bytes left at 0000000000000046 [ 62.656423] IP: [<ffffffff816d822d>] ip6_route_output+0xbd/0xe0 [ 62.656525] PGD 2c966067 PUD 2c9a2067 PMD 0 [ 62.656674] Oops: 0000 [#1] SMP [ 62.656781] Modules linked in: vxlan netconsole deflate zlib_deflate af_key [ 62.657083] CPU: 1 PID: 2128 Comm: whoopsie Not tainted 3.12.0+ #182 [ 62.657083] Hardware name: innotek GmbH VirtualBox, BIOS VirtualBox 12/01/2006 [ 62.657083] task: ffff88002e2335d0 ti: ffff88002c94c000 task.ti: ffff88002c94c000 [ 62.657083] RIP: 0010:[<ffffffff816d822d>] [<ffffffff816d822d>] ip6_route_output+0xbd/0xe0 [ 62.657083] RSP: 0000:ffff88002fd038f8 EFLAGS: 00210296 [ 62.657083] RAX: 0000000000000000 RBX: ffff88002fd039e0 RCX: 0000000000000000 [ 62.657083] RDX: ffff88002fd0eb68 RSI: ffff88002fd0d278 RDI: ffff88002fd0d278 [ 62.657083] RBP: ffff88002fd03918 R08: 0000000002000000 R09: 0000000000000000 [ 62.657083] R10: 00000000000001ff R11: 0000000000000000 R12: 0000000000000001 [ 62.657083] R13: ffff88002d96b480 R14: ffffffff81c8e2c0 R15: 0000000000000001 [ 62.657083] FS: 0000000000000000(0000) GS:ffff88002fd00000(0063) knlGS:00000000f693b740 [ 62.657083] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 62.657083] CR2: 0000000000000046 CR3: 000000002c9d2000 CR4: 00000000000006e0 [ 62.657083] Stack: [ 62.657083] ffff88002fd03a40 ffffffff81c8e2c0 ffff88002fd039e0 ffff88002d96b480 [ 62.657083] ffff88002fd03958 ffffffff816cac8b ffff880019277cc0 ffff8800192b5d00 [ 62.657083] ffff88002d5bc000 ffff880019277cc0 0000000000001821 0000000000000001 [ 62.657083] Call Trace: [ 62.657083] <IRQ> [ 62.657083] [<ffffffff816cac8b>] ip6_dst_lookup_tail+0xdb/0xf0 [ 62.657083] [<ffffffff816caea0>] ip6_dst_lookup+0x10/0x20 [ 62.657083] [<ffffffffa0020c13>] vxlan_xmit_one+0x193/0x9c0 [vxlan] [ 62.657083] [<ffffffff8137b3b7>] ? account+0xc7/0x1f0 [ 62.657083] [<ffffffffa0021513>] vxlan_xmit+0xd3/0x400 [vxlan] [ 62.657083] [<ffffffff8161390d>] dev_hard_start_xmit+0x49d/0x5e0 [ 62.657083] [<ffffffff81613d29>] dev_queue_xmit+0x2d9/0x480 [ 62.657083] [<ffffffff817cb854>] ? _raw_write_unlock_bh+0x14/0x20 [ 62.657083] [<ffffffff81630565>] ? eth_header+0x35/0xe0 [ 62.657083] [<ffffffff8161bc5e>] neigh_resolve_output+0x11e/0x1e0 [ 62.657083] [<ffffffff816ce0e0>] ? ip6_fragment+0xad0/0xad0 [ 62.657083] [<ffffffff816cb465>] ip6_finish_output2+0x2f5/0x470 [ 62.657083] [<ffffffff816ce166>] ip6_finish_output+0x86/0xc0 [ 62.657083] [<ffffffff816ce218>] ip6_output+0x78/0xb0 [ 62.657083] [<ffffffff816eadd6>] mld_sendpack+0x256/0x2a0 [ 62.657083] [<ffffffff816ebd8c>] mld_ifc_timer_expire+0x17c/0x290 [ 62.657083] [<ffffffff816ebc10>] ? igmp6_timer_handler+0x80/0x80 [ 62.657083] [<ffffffff816ebc10>] ? igmp6_timer_handler+0x80/0x80 [ 62.657083] [<ffffffff81051065>] call_timer_fn+0x45/0x150 [ 62.657083] [<ffffffff816ebc10>] ? igmp6_timer_handler+0x80/0x80 [ 62.657083] [<ffffffff81052353>] run_timer_softirq+0x1f3/0x2a0 [ 62.657083] [<ffffffff8102dfd8>] ? lapic_next_event+0x18/0x20 [ 62.657083] [<ffffffff8109e36f>] ? clockevents_program_event+0x6f/0x110 [ 62.657083] [<ffffffff8104a2f6>] __do_softirq+0xd6/0x2b0 [ 62.657083] [<ffffffff8104a75e>] irq_exit+0x7e/0xa0 [ 62.657083] [<ffffffff8102ea15>] smp_apic_timer_interrupt+0x45/0x60 [ 62.657083] [<ffffffff817d3eca>] apic_timer_interrupt+0x6a/0x70 [ 62.657083] <EOI> [ 62.657083] [<ffffffff817d4a35>] ? sysenter_dispatch+0x7/0x1a [ 62.657083] Code: 4d 8b 85 a8 02 00 00 4c 89 e9 ba 03 04 00 00 48 c7 c6 c0 be 8d 81 48 c7 c7 48 35 a3 81 31 c0 e8 db 68 0e 00 49 8b 85 a8 02 00 00 <0f> b6 40 46 c0 e8 05 0f b6 c0 c1 e0 03 41 09 c4 e9 77 ff ff ff [ 62.657083] RIP [<ffffffff816d822d>] ip6_route_output+0xbd/0xe0 [ 62.657083] RSP <ffff88002fd038f8> [ 62.657083] CR2: 0000000000000046 [ 62.657083] ---[ end trace ba8a9583d7cd1934 ]--- [ 62.657083] Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by:
Fan Du <fan.du@windriver.com> Reported-by:
Ryan Whelan <rcwhelan@gmail.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
Since commit 52367a76 ("cxgb4/cxgb4vf: Code cleanup to enable T4 Configuration File support"), we have failures like this during cxgb4 probe: cxgb4 0000:01:00.4: bad SGE FL page buffer sizes [65536, 65536] cxgb4: probe of 0000:01:00.4 failed with error -22 This happens whenever software parameters are used, without a configuration file. That happens when the hardware was already initialized (after kexec, or after csiostor is loaded). It happens that these values are acceptable, rendering fl_pg_order equal to 0, which is the case of a hard init when the page size is equal or larger than 65536. Accepting fl_large_pg equal to fl_small_pg solves the issue, and shouldn't cause any trouble besides a possible performance reduction when smaller pages are used. And that can be fixed by a configuration file. Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by:
-
- 03 Jan, 2014 7 commits
-
-
David S. Miller authored
The VLAN tag handling code in netpoll_send_skb_on_dev() has two problems. 1) It exits without unlocking the TXQ. 2) It then tries to queue a NULL skb to npinfo->txq. Reported-by:
Ahmed Tamrawi <atamrawi@iastate.edu> Signed-off-by:
-
Li RongQing authored
when read/write the 64bit data, the correct lock should be hold. and we can use the generic vti6_get_stats to return stats, and not define a new one in ip6_vti.c Fixes: 87b6d218 ("tunnel: implement 64 bits statistics") Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Signed-off-by:
-
Li RongQing authored
when read/write the 64bit data, the correct lock should be hold. Fixes: 87b6d218 ("tunnel: implement 64 bits statistics") Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Yasushi Asano authored
Fixed a problem with setting the lifetime of an IPv6 address. When setting preferred_lft to a value not zero or infinity, while valid_lft is infinity(0xffffffff) preferred lifetime is set to forever and does not update. Therefore preferred lifetime never becomes deprecated. valid lifetime and preferred lifetime should be set independently, even if valid lifetime is infinity, preferred lifetime must expire correctly (meaning it must eventually become deprecated) Signed-off-by:
Yasushi Asano <yasushi.asano@jp.fujitsu.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Daniel Borkmann authored
While commit 30a584d9 fixes datagram interface in LLC, a use after free bug has been introduced for SOCK_STREAM sockets that do not make use of MSG_PEEK. The flow is as follow ... if (!(flags & MSG_PEEK)) { ... sk_eat_skb(sk, skb, false); ... } ... if (used + offset < skb->len) continue; ... where sk_eat_skb() calls __kfree_skb(). Therefore, cache original length and work on skb_len to check partial reads. Fixes: 30a584d9 ("[LLX]: SOCK_DGRAM interface fixes") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by:
-
Jason Wang authored
During restoring, try_fill_recv() was called with neither napi lock nor napi disabled. This can lead two try_fill_recv() was called in the same time. Fix this by refilling before trying to enable napi. Fixes 0741bcb5 (virtio: net: Add freeze, restore handlers to support S4). Cc: Amit Shah <amit.shah@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Wei-Chun Chao authored
VM to VM GSO traffic is broken if it goes through VXLAN or GRE tunnel and the physical NIC on the host supports hardware VXLAN/GRE GSO offload (e.g. bnx2x and next-gen mlx4). Two issues - (VXLAN) VM traffic has SKB_GSO_DODGY and SKB_GSO_UDP_TUNNEL with SKB_GSO_TCP/UDP set depending on the inner protocol. GSO header integrity check fails in udp4_ufo_fragment if inner protocol is TCP. Also gso_segs is calculated incorrectly using skb->len that includes tunnel header. Fix: robust check should only be applied to the inner packet. (VXLAN & GRE) Once GSO header integrity check passes, NULL segs is returned and the original skb is sent to hardware. However the tunnel header is already pulled. Fix: tunnel header needs to be restored so that hardware can perform GSO properly on the original packet. Signed-off-by:
Wei-Chun Chao <weichunc@plumgrid.com> Signed-off-by:
-
- 02 Jan, 2014 10 commits
-
-
Vlad Yasevich authored
The SCTP outqueue structure maintains a data chunks that are pending transmission, the list of chunks that are pending a retransmission and a length of data in flight. It also tries to keep the emtpy state so that it can performe shutdown sequence or notify user. The problem is that the empy state is inconsistently tracked. It is possible to completely drain the queue without sending anything when using PR-SCTP. In this case, the empty state will not be correctly state as report by Jamal Hadi Salim <jhs@mojatatu.com>. This can cause an association to be perminantly stuck in the SHUTDOWN_PENDING state. Additionally, SCTP is incredibly inefficient when setting the empty state. Even though all the data is availaible in the outqueue structure, we ignore it and walk a list of trasnports. In the end, we can completely remove the extra empty state and figure out if the queue is empty by looking at 3 things: length of pending data, length of in-flight data, and exisiting of retransmit data. All of these are already in the strucutre. Reported-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Vlad Yasevich <vyasevich@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Tested-by:
-
Manish Chopra authored
o TX queues allocation was getting distributed equally among all the functions of the port including VFs and PF. Which was leading to failure in PF's multiple TX queues creation. o Instead of dividing queues equally allocate one TX queue for each VF as VF doesn't support multiple TX queues. Signed-off-by:
-
Manish Chopra authored
o Adapter requires that if the port is in loopback mode no traffic should be flowing through that port, so on arrival of Link up AEN, do not advertise Link up to the stack until port is out of loopback mode Signed-off-by:
-
Li RongQing authored
when read/write the 64bit data, the correct lock should be hold. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Daniel Borkmann authored
Function llc_conn_ac_inc_vr_by_1() evaluates via macro PDU_GET_NEXT_Vr() into ... llc_sk(sk)->vR = ++llc_sk(sk)->vR & 0xffffffffffffff7f ... but the order in which the side effects take place is undefined because there is no intervening sequence point. As llc_sk(sk)->vR is written in llc_sk(sk)->vR (assignment left-hand side) and written in ++llc_sk(sk)->vR & 0xffffffffffffff7f this might possibly yield undefined behavior. The final value of llc_sk(sk)->vR is ambiguous, because, depending on the order of expression evaluation, the increment may occur before, after, or interleaved with the assignment. In C, evaluating such an expression yields undefined behavior. Since we're doing the increment via PDU_GET_NEXT_Vr() macro and the only place it is being used is from llc_conn_ac_inc_vr_by_1(), in order to increment vR by 1 with a follow-up optimized modulo, rewrite the expression into ((vR + 1) & CONST) in order to fix this. Signed-off-by:
-
Yaniv Rosner authored
KR2 work-around is based on detecting non-KR2 devices which may not link up in this mode. One such link-partner is the BCM8073 which has specific advertisement characteristics in specific mode, and this condition was not set correctly. Signed-off-by:
Yaniv Rosner <yanivr@broadcom.com> Signed-off-by:
Ariel Elior <ariele@broadcom.com> Signed-off-by:
-
Yaniv Rosner authored
Fix a problem where link is reported to be up when SFP+ module is plugged in without cable. This occurs with specific module types which may generate temporary TX_FAULT indication. Solution is to avoid changing any link parameters when checking TX_FAULT indication while physical link is down. Signed-off-by:
-
Yaniv Rosner authored
BCM54618SE is used to advertise half-duplex even if HD was not requested by the user. This change makes the legacy speed/duplex advertisement for this PHY exactly according to the requested speed and duplex. Signed-off-by:
-
Yaniv Rosner authored
Fix Passive DAC detection for specific cables, such that even in case SFP_CABLE_TECHNOLOGY option is not set in the EEPROM (offset 8), treat it as a passive DAC cable, since some cables don't have this indication. Signed-off-by:
-
Yaniv Rosner authored
Fix a problem where 578xx-KR is unable to get link when connected to 1G link partner. Two fixes were required: One was to force CL37 sync_status low to prevent Warpcore from getting stuck in CL73 parallel detect loop while link partner is sending. Second fix was to enable auto-detect mode, thus allowing the Warpcore to select the higher speed protocol between 10G-KR (over CL73), or go down to 1G over CL73 when there's indication for it. Signed-off-by:
-
- 31 Dec, 2013 2 commits
-
-
Octavian Purdila authored
Even with the quirks in commit dabdaf0c (mcs7830: Fix link state detection) there are still spurious link-down events for some chips where the false link-down events count go over a few hundreds. This patch takes a more conservative approach and only looks at link-down events where the link-down state is not combined with other states (e.g. half/full speed, pending frames in SRAM or TX status information valid). In all other cases we assume the link is up. Tested on MCS7830CV-DA (USB ID 9710:7830). Cc: Ondrej Zary <linux@rainbow-software.org> Cc: Michael Leun <lkml20120218@newton.leun.net> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by:
Octavian Purdila <octavian.purdila@intel.com> Signed-off-by:
-
David S. Miller authored
When the vlan code detects that the real device can do TX VLAN offloads in hardware, it tries to arrange for the real device's header_ops to be invoked directly. But it does so illegally, by simply hooking the real device's header_ops up to the VLAN device. This doesn't work because we will end up invoking a set of header_ops routines which expect a device type which matches the real device, but will see a VLAN device instead. Fix this by providing a pass-thru set of header_ops which will arrange to pass the proper real device instead. To facilitate this add a dev_rebuild_header(). There are implementations which provide a ->cache and ->create but not a ->rebuild (f.e. PLIP). So we need a helper function just like dev_hard_header() to avoid crashes. Use this helper in the one existing place where the header_ops->rebuild was being invoked, the neighbour code. With lots of help from Florian Westphal. Signed-off-by:
-
- 30 Dec, 2013 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree fixes from Rob Herring: - Fix 2 regressions found on PPC - Allow NULL ptr in unflatten_and_copy_device_tree - Update my email address * tag 'dt-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: MAINTAINERS: Update Rob Herring's email address of/irq: Fix device_node refcount in of_irq_parse_raw() of/Kconfig: Spelling s/one/once/ Revert "of/address: Handle #address-cells > 2 specially" of: Fix NULL dereference in unflatten_and_copy()
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
Pull powerpc fixes from Ben Herrenschmidt: "A bit more endian problems found during testing of 3.13 and a few other simple fixes and regressions fixes" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Fix alignment of secondary cpu spin vars powerpc: Align p_end powernv/eeh: Add buffer for P7IOC hub error data powernv/eeh: Fix possible buffer overrun in ioda_eeh_phb_diag() powerpc: Make 64-bit non-VMX __copy_tofrom_user bi-endian powerpc: Make unaligned accesses endian-safe for powerpc powerpc: Fix bad stack check in exception entry powerpc/512x: dts: disable MPC5125 usb module powerpc/512x: dts: remove misplaced IRQ spec from 'soc' node (5125)
-
Rob Herring authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Some holiday bug fixes for 3.13... There is still one bug I'd like to get fixed before 3.13-final. The vlan code erroneously assignes the header ops of the underlying real device to the VLAN device above it when the real device can hardware offload VLAN handling. That's completely bogus because header ops are tied to the device type, so they only expect to see a 'dev' argument compatible with their ops. The fix is the have the VLAN code use a special set of header ops that does the pass-thru correctly, by calling the underlying real device's header ops but _also_ passing in the real device instead of the VLAN device. That fix is currently waiting some testing. Anyways, of note here: 1) Fix bitmap edge case in radiotap, from Johannes Berg. 2) Fix oops on driver unload in rtlwifi, from Larry Finger. 3) Bonding doesn't do locking correctly during speed/duplex/link changes, from Ding Tianhong. 4) Fix header parsing in GRE code, this bug has been around for a few releases. From Timo Teräs. 5) SIT tunnel driver MTU check needs to take GSO into account, from Eric Dumazet. 6) Minor info leak in inet_diag, from Daniel Borkmann. 7) Info leak in YAM hamradio driver, from Salva Peiró. 8) Fix route expiration state handling in ipv6 routing code, from Li RongQing. 9) DCCP probe module does not check request_module()'s return value, from Wang Weidong. 10) cpsw driver passes NULL device names to request_irq(), from Mugunthan V N. 11) Prevent a NULL splat in RDS binding code, from Sasha Levin. 12) Fix 4G overflow test in tg3 driver, from Nithin Sujir. 13) Cure use after free in arc_emac and fec driver's software timestamp handling, from Eric Dumazet. 14) SIT driver can fail to release the route when iptunnel_handle_offloads() throws an error. From Li RongQing. 15) Several batman-adv fixes from Simon Wunderlich and Antonio Quartulli. 16) Fix deadlock during TIPC socket release, from Ying Xue. 17) Fix regression in ROSE protocol recvmsg() msg_name handling, from Florian Westphal. 18) stmmac PTP support releases wrong spinlock, from Vince Bridgers" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits) stmmac: Fix incorrect spinlock release and PTP cap detection. phy: IRQ cannot be shared net: rose: restore old recvmsg behavior xen-netback: fix guest-receive-side array sizes fec: Do not assume that PHY reset is active low tipc: fix deadlock during socket release netfilter: nf_tables: fix wrong datatype in nft_validate_data_load() batman-adv: fix vlan header access batman-adv: clean nf state when removing protocol header batman-adv: fix alignment for batadv_tvlv_tt_change batman-adv: fix size of batadv_bla_claim_dst batman-adv: fix size of batadv_icmp_header batman-adv: fix header alignment by unrolling batadv_header batman-adv: fix alignment for batadv_coded_packet netfilter: nf_tables: fix oops when updating table with user chains netfilter: nf_tables: fix dumping with large number of sets ipv6: release dst properly in ipip6_tunnel_xmit netxen: Correct off-by-one errors in bounds checks net: Add some clarification to skb_tx_timestamp() comment. arc_emac: fix potential use after free ... -
Rob Herring authored
My Calxeda email address is going away. Signed-off-by:
Rob Herring <rob.herring@calxeda.com> Signed-off-by:
Rob Herring <robh@kernel.org>
-
Cédric Le Goater authored
Commit 23616132, "of/irq: Refactor interrupt-map parsing" changed the refcount on the device_node causing an error in of_node_put(): ERROR: Bad of_node_put() on /pci@800000020000000 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0-rc3-dirty #2 Call Trace: [c00000003e403500] [c0000000000144fc] .show_stack+0x7c/0x1f0 (unreliable) [c00000003e4035d0] [c00000000070f250] .dump_stack+0x88/0xb4 [c00000003e403650] [c0000000005e8768] .of_node_release+0xd8/0xf0 [c00000003e4036e0] [c0000000005eeafc] .of_irq_parse_one+0x10c/0x280 [c00000003e4037a0] [c0000000005efd4c] .of_irq_parse_pci+0x3c/0x1d0 [c00000003e403840] [c000000000038240] .pcibios_setup_device+0xa0/0x2e0 [c00000003e403910] [c0000000000398f0] .pcibios_setup_bus_devices+0x60/0xd0 [c00000003e403990] [c00000000003b3a4] .__of_scan_bus+0x1a4/0x2b0 [c00000003e403a80] [c00000000003a62c] .pcibios_scan_phb+0x30c/0x410 [c00000003e403b60] [c0000000009fe430] .pcibios_init+0x7c/0xd4 This patch adjusts the refcount in the walk of the interrupt tree. When a match is found, there is no need to increase the refcount on 'out_irq->np' as 'newpar' is already holding a ref. The refcount balance between 'ipar' and 'newpar' is maintained in the skiplevel: goto label. This patch also removes the usage of the device_node variable 'old' which seems useless after the latest changes. Signed-off-by:
Cédric Le Goater <clg@fr.ibm.com> Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by:
-
Rob Herring authored
This reverts commit e38c0a1f. Nikita Yushchenko reports: While trying to make freescale p2020ds and mpc8572ds boards working with mainline kernel, I faced that commit e38c0a1f (Handle Both these boards have uli1575 chip. Corresponding part in device tree is something like uli1575@0 { reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; ranges = <0x2000000 0x0 0x80000000 0x2000000 0x0 0x80000000 0x0 0x20000000 0x1000000 0x0 0x0 0x1000000 0x0 0x0 0x0 0x10000>; isa@1e { ... I.e. it has #address-cells = <3> With commit e38c0a1f reverted, devices under uli1575 are registered correctly, e.g. for rtc OF: ** translation for device /pcie@ffe09000/pcie@0/uli1575@0/isa@1e/rtc@70 ** OF: bus is isa (na=2, ns=1) on /pcie@ffe09000/pcie@0/uli1575@0/isa@1e OF: translating address: 00000001 00000070 OF: parent bus is default (na=3, ns=2) on /pcie@ffe09000/pcie@0/uli1575@0 OF: walking ranges... OF: ISA map, cp=0, s=1000, da=70 OF: parent translation for: 01000000 00000000 00000000 OF: with offset: 70 OF: one level translation: 00000000 00000000 00000070 OF: parent bus is pci (na=3, ns=2) on /pcie@ffe09000/pcie@0 OF: walking ranges... OF: default map, cp=a0000000, s=20000000, da=70 OF: default map, cp=0, s=10000, da=70 OF: parent translation for: 01000000 00000000 00000000 OF: with offset: 70 OF: one level translation: 01000000 00000000 00000070 OF: parent bus is pci (na=3, ns=2) on /pcie@ffe09000 OF: walking ranges... OF: PCI map, cp=0, s=10000, da=70 OF: parent translation for: 01000000 00000000 00000000 OF: with offset: 70 OF: one level translation: 01000000 00000000 00000070 OF: parent bus is default (na=2, ns=2) on / OF: walking ranges... OF: PCI map, cp=0, s=10000, da=70 OF: parent translation for: 00000000 ffc10000 OF: with offset: 70 OF: one level translation: 00000000 ffc10070 OF: reached root node With commit e38c0a1f in place, address translation fails: OF: ** translation for device /pcie@ffe09000/pcie@0/uli1575@0/isa@1e/rtc@70 ** OF: bus is isa (na=2, ns=1) on /pcie@ffe09000/pcie@0/uli1575@0/isa@1e OF: translating address: 00000001 00000070 OF: parent bus is default (na=3, ns=2) on /pcie@ffe09000/pcie@0/uli1575@0 OF: walking ranges... OF: ISA map, cp=0, s=1000, da=70 OF: parent translation for: 01000000 00000000 00000000 OF: with offset: 70 OF: one level translation: 00000000 00000000 00000070 OF: parent bus is pci (na=3, ns=2) on /pcie@ffe09000/pcie@0 OF: walking ranges... OF: default map, cp=a0000000, s=20000000, da=70 OF: default map, cp=0, s=10000, da=70 OF: not found ! Thierry Reding confirmed this commit was not needed after all: "We ended up merging a different address representation for Tegra PCIe and I've confirmed that reverting this commit doesn't cause any obvious regressions. I think all other drivers in drivers/pci/host ended up copying what we did on Tegra, so I wouldn't expect any other breakage either." There doesn't appear to be a simple way to support both behaviours, so reverting this as nothing should be depending on the new behaviour. Cc: stable@vger.kernel.org # v3.7+ Signed-off-by:
-
Benjamin Herrenschmidt authored
Anatolij writes: Please pull two DTS fixes for MPC5125 tower board. Without them the v3.13-rcX kernels do not boot.
-
Vince Bridgers authored
This patch corrects a problem in stmmac_ptp.c, functions stmmac_adjust_time and stmmac_adjust_freq where the incorrect spinlocks were released. This patch also addresses a problem in stmmac_main, function stmmac_init_ptp where the capability detection for advanced timestamping was masked by message masking. This patch was touch tested using linuxptp, and runs without the previously observed instabilities. More extensive testing is ongoing. Vince Signed-off-by:
Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by:
-
Sergei Shtylyov authored
With the way PHY IRQ handler is implemented (all real handling being pushed to the workqueue and returning IRQ_HANDLED all the time PHY is active), we cannot really claim that PHY IRQ can be shared when calling request_irq(). Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Westphal authored
recvmsg handler in net/rose/af_rose.c performs size-check ->msg_namelen. After commit f3d33426 (net: rework recvmsg handler msg_name and msg_namelen logic), we now always take the else branch due to namelen being initialized to 0. Digging in netdev-vger-cvs git repo shows that msg_namelen was initialized with a fixed-size since at least 1995, so the else branch was never taken. Compile tested only. Signed-off-by:
Florian Westphal <fw@strlen.de> Acked-by:
-
Paul Durrant authored
The sizes chosen for the metadata and grant_copy_op arrays on the guest receive size are wrong; - The meta array is needlessly twice the ring size, when we only ever consume a single array element per RX ring slot - The grant_copy_op array is way too small. It's sized based on a bogus assumption: that at most two copy ops will be used per ring slot. This may have been true at some point in the past but it's clear from looking at start_new_rx_buffer() that a new ring slot is only consumed if a frag would overflow the current slot (plus some other conditions) so the actual limit is MAX_SKB_FRAGS grant_copy_ops per ring slot. This patch fixes those two sizing issues and, because grant_copy_ops grows so much, it pulls it out into a separate chunk of vmalloc()ed memory. Signed-off-by:
Paul Durrant <paul.durrant@citrix.com> Acked-by:
Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Fabio Estevam authored
We should not assume that the PHY reset is always active low. Retrieve this information from the device tree instead, so that the PHY reset can work on both cases. Reported-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Ying Xue authored
A deadlock might occur if name table is withdrawn in socket release routine, and while packets are still being received from bearer. CPU0 CPU1 T0: recv_msg() release() T1: tipc_recv_msg() tipc_withdraw() T2: [grab node lock] [grab port lock] T3: tipc_link_wakeup_ports() tipc_nametbl_withdraw() T4: [grab port lock]* named_cluster_distribute() T5: wakeupdispatch() tipc_link_send() T6: [grab node lock]* The opposite order of holding port lock and node lock on above two different paths may result in a deadlock. If socket lock instead of port lock is used to protect port instance in tipc_withdraw(), the reverse order of holding port lock and node lock will be eliminated, as a result, the deadlock is killed as well. Reported-by:Lars Everbrand <lars.everbrand@ericsson.com> Reviewed-by:
Erik Hugne <erik.hugne@ericsson.com> Signed-off-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Olof Johansson authored
Commit 5c0484e2 ('powerpc: Endian safe trampoline') resulted in losing proper alignment of the spinlock variables used when booting secondary CPUs, causing some quite odd issues with failing to boot on PA Semi-based systems. This showed itself on ppc64_defconfig, but not on pasemi_defconfig, so it had gone unnoticed when I initially tested the LE patch set. Fix is to add explicit alignment instead of relying on good luck. :) [ It appears that there is a different issue with PA Semi systems however this fix is definitely correct so applying anyway -- BenH ] Fixes: 5c0484e2 ('powerpc: Endian safe trampoline') Reported-by:
Christian Zigotzky <chzigotzky@xenosoft.de> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=67811Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Anton Blanchard authored
p_end is an 8 byte value embedded in the text section. This means it is only 4 byte aligned when it should be 8 byte aligned. Fix this by adding an explicit alignment. This fixes an issue where POWER7 little endian builds with CONFIG_RELOCATABLE=y fail to boot. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
