- 07 Aug, 2014 19 commits
-
-
Gao feng authored
commit 33d99113 upstream. commit 25fb6ca4 "net IPv6 : Fix broken IPv6 routing table after loopback down-up" allocates addrconf router for ipv6 address when lo device up. but commit a881ae1f "ipv6:don't call addrconf_dst_alloc again when enable lo" breaks this behavior. Since the addrconf router is moved to the garbage list when lo device down, we should release this router and rellocate a new one for ipv6 address when lo device up. This patch solves bug 67951 on bugzilla https://bugzilla.kernel.org/show_bug.cgi?id=67951 change from v1: use ip6_rt_put to repleace ip6_del_rt, thanks Hannes! change code style, suggested by Sergei. CC: Sabrina Dubroca <sd@queasysnail.net> CC: Hannes Frederic Sowa <hannes@stressinduktion.org> Reported-by:
Weilong Chen <chenweilong@huawei.com> Signed-off-by:
Gao feng <gaofeng@cn.fujitsu.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
David S. Miller <davem@davemloft.net> [weilong: s/ip6_rt_put/dst_release] Signed-off-by:
Li Zefan <lizefan@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vlastimil Babka authored
commit 57e68e9c upstream. A BUG_ON(!PageLocked) was triggered in mlock_vma_page() by Sasha Levin fuzzing with trinity. The call site try_to_unmap_cluster() does not lock the pages other than its check_page parameter (which is already locked). The BUG_ON in mlock_vma_page() is not documented and its purpose is somewhat unclear, but apparently it serializes against page migration, which could otherwise fail to transfer the PG_mlocked flag. This would not be fatal, as the page would be eventually encountered again, but NR_MLOCK accounting would become distorted nevertheless. This patch adds a comment to the BUG_ON in mlock_vma_page() and munlock_vma_page() to that effect. The call site try_to_unmap_cluster() is fixed so that for page != check_page, trylock_page() is attempted (to avoid possible deadlocks as we already have check_page locked) and mlock_vma_page() is performed only upon success. If the page lock cannot be obtained, the page is left without PG_mlocked, which is again not a problem in the whole unevictable memory design. Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
Bob Liu <bob.liu@oracle.com> Reported-by:
Sasha Levin <sasha.levin@oracle.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Michel Lespinasse <walken@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by:
Rik van Riel <riel@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by:
-
Boris Ostrovsky authored
commit 8762e509 upstream. init_espfix_ap() is currently off by one level when informing hypervisor that allocated pages will be used for ministacks' page tables. The most immediate effect of this on a PV guest is that if 'stack_page = __get_free_page()' returns a non-zeroed-out page the hypervisor will refuse to use it for a page table (which it shouldn't be anyway). This will result in warnings by both Xen and Linux. More importantly, a subsequent write to that page (again, by a PV guest) is likely to result in fatal page fault. Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: http://lkml.kernel.org/r/1404926298-5565-1-git-send-email-boris.ostrovsky@oracle.comReviewed-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Minfei Huang authored
commit c75b53af upstream. I use btree from 3.14-rc2 in my own module. When the btree module is removed, a warning arises: kmem_cache_destroy btree_node: Slab cache still has objects CPU: 13 PID: 9150 Comm: rmmod Tainted: GF O 3.14.0-rc2 #1 Hardware name: Inspur NF5270M3/NF5270M3, BIOS CHEETAH_2.1.3 09/10/2013 Call Trace: dump_stack+0x49/0x5d kmem_cache_destroy+0xcf/0xe0 btree_module_exit+0x10/0x12 [btree] SyS_delete_module+0x198/0x1f0 system_call_fastpath+0x16/0x1b The cause is that it doesn't release the last btree node, when height = 1 and fill = 1. [akpm@linux-foundation.org: remove unneeded test of NULL] Signed-off-by:
Minfei Huang <huangminfei@ucloud.cn> Cc: Joern Engel <joern@logfs.org> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Sasha Levin authored
commit 3cf521f7 upstream. The l2tp [get|set]sockopt() code has fallen back to the UDP functions for socket option levels != SOL_PPPOL2TP since day one, but that has never actually worked, since the l2tp socket isn't an inet socket. As David Miller points out: "If we wanted this to work, it'd have to look up the tunnel and then use tunnel->sk, but I wonder how useful that would be" Since this can never have worked so nobody could possibly have depended on that functionality, just remove the broken code and return -EINVAL. Reported-by:
James Chapman <jchapman@katalix.com> Acked-by:
-
Greg Kroah-Hartman authored
This reverts commit 29a3cd46 which is commit fe6cc55f upstream. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Marcelo Ricardo Leitner <mleitner@redhat.com> Cc: Florian Westphal <fw@strlen.de> Cc: David S. Miller <davem@davemloft.net> Cc: Thomas Jarosch <thomas.jarosch@intra2net.com> Signed-off-by:
-
Andy Lutomirski authored
commit 7209a75d upstream. This moves the espfix64 logic into native_iret. To make this work, it gets rid of the native patch for INTERRUPT_RETURN: INTERRUPT_RETURN on native kernels is now 'jmp native_iret'. This changes the 16-bit SS behavior on Xen from OOPSing to leaking some bits of the Xen hypervisor's RSP (I think). [ hpa: this is a nonzero cost on native, but probably not enough to measure. Xen needs to fix this in their own code, probably doing something equivalent to espfix64. ] Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/7b8f1d8ef6597cb16ae004a43c56980a7de3cf94.1406129132.git.luto@amacapital.netSigned-off-by:
-
H. Peter Anvin authored
commit 34273f41 upstream. Embedded systems, which may be very memory-size-sensitive, are extremely unlikely to ever encounter any 16-bit software, so make it a CONFIG_EXPERT option to turn off support for any 16-bit software whatsoever. Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/r/1398816946-3351-1-git-send-email-hpa@linux.intel.comSigned-off-by:
-
H. Peter Anvin authored
commit 197725de upstream. Make espfix64 a hidden Kconfig option. This fixes the x86-64 UML build which had broken due to the non-existence of init_espfix_bsp() in UML: since UML uses its own Kconfig, this option does not appear in the UML build. This also makes it possible to make support for 16-bit segments a configuration option, for the people who want to minimize the size of the kernel. Reported-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
H. Peter Anvin authored
commit 20b68535 upstream. Header guard is #ifndef, not #ifdef... Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
H. Peter Anvin authored
commit e1fe9ed8 upstream. Sparse warns that the percpu variables aren't declared before they are defined. Rather than hacking around it, move espfix definitions into a proper header file. Reported-by:
-
H. Peter Anvin authored
commit 3891a04a upstream. The IRET instruction, when returning to a 16-bit segment, only restores the bottom 16 bits of the user space stack pointer. This causes some 16-bit software to break, but it also leaks kernel state to user space. We have a software workaround for that ("espfix") for the 32-bit kernel, but it relies on a nonzero stack segment base which is not available in 64-bit mode. In checkin: b3b42ac2 x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels we "solved" this by forbidding 16-bit segments on 64-bit kernels, with the logic that 16-bit support is crippled on 64-bit kernels anyway (no V86 support), but it turns out that people are doing stuff like running old Win16 binaries under Wine and expect it to work. This works around this by creating percpu "ministacks", each of which is mapped 2^16 times 64K apart. When we detect that the return SS is on the LDT, we copy the IRET frame to the ministack and use the relevant alias to return to userspace. The ministacks are mapped readonly, so if IRET faults we promote #GP to #DF which is an IST vector and thus has its own stack; we then do the fixup in the #DF handler. (Making #GP an IST exception would make the msr_safe functions unsafe in NMI/MC context, and quite possibly have other effects.) Special thanks to: - Andy Lutomirski, for the suggestion of using very small stack slots and copy (as opposed to map) the IRET frame there, and for the suggestion to mark them readonly and let the fault promote to #DF. - Konrad Wilk for paravirt fixup and testing. - Borislav Petkov for testing help and useful comments. Reported-by:
Brian Gerst <brgerst@gmail.com> Signed-off-by:
-
H. Peter Anvin authored
commit 7ed6fb9b upstream. This reverts commit fa81511b in preparation of merging in the proper fix (espfix64). Signed-off-by:
-
Jan Kara authored
commit 504d5874 upstream. clockevents_increase_min_delta() calls printk() from under hrtimer_bases.lock. That causes lock inversion on scheduler locks because printk() can call into the scheduler. Lockdep puts it as: ====================================================== [ INFO: possible circular locking dependency detected ] 3.15.0-rc8-06195-g939f04be #2 Not tainted ------------------------------------------------------- trinity-main/74 is trying to acquire lock: (&port_lock_key){-.....}, at: [<811c60be>] serial8250_console_write+0x8c/0x10c but task is already holding lock: (hrtimer_bases.lock){-.-...}, at: [<8103caeb>] hrtimer_try_to_cancel+0x13/0x66 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #5 (hrtimer_bases.lock){-.-...}: [<8104a942>] lock_acquire+0x92/0x101 [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e [<8103c918>] __hrtimer_start_range_ns+0x1c/0x197 [<8107ec20>] perf_swevent_start_hrtimer.part.41+0x7a/0x85 [<81080792>] task_clock_event_start+0x3a/0x3f [<810807a4>] task_clock_event_add+0xd/0x14 [<8108259a>] event_sched_in+0xb6/0x17a [<810826a2>] group_sched_in+0x44/0x122 [<81082885>] ctx_sched_in.isra.67+0x105/0x11f [<810828e6>] perf_event_sched_in.isra.70+0x47/0x4b [<81082bf6>] __perf_install_in_context+0x8b/0xa3 [<8107eb8e>] remote_function+0x12/0x2a [<8105f5af>] smp_call_function_single+0x2d/0x53 [<8107e17d>] task_function_call+0x30/0x36 [<8107fb82>] perf_install_in_context+0x87/0xbb [<810852c9>] SYSC_perf_event_open+0x5c6/0x701 [<810856f9>] SyS_perf_event_open+0x17/0x19 [<8142f8ee>] syscall_call+0x7/0xb -> #4 (&ctx->lock){......}: [<8104a942>] lock_acquire+0x92/0x101 [<8142f04c>] _raw_spin_lock+0x21/0x30 [<81081df3>] __perf_event_task_sched_out+0x1dc/0x34f [<8142cacc>] __schedule+0x4c6/0x4cb [<8142cae0>] schedule+0xf/0x11 [<8142f9a6>] work_resched+0x5/0x30 -> #3 (&rq->lock){-.-.-.}: [<8104a942>] lock_acquire+0x92/0x101 [<8142f04c>] _raw_spin_lock+0x21/0x30 [<81040873>] __task_rq_lock+0x33/0x3a [<8104184c>] wake_up_new_task+0x25/0xc2 [<8102474b>] do_fork+0x15c/0x2a0 [<810248a9>] kernel_thread+0x1a/0x1f [<814232a2>] rest_init+0x1a/0x10e [<817af949>] start_kernel+0x303/0x308 [<817af2ab>] i386_start_kernel+0x79/0x7d -> #2 (&p->pi_lock){-.-...}: [<8104a942>] lock_acquire+0x92/0x101 [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e [<810413dd>] try_to_wake_up+0x1d/0xd6 [<810414cd>] default_wake_function+0xb/0xd [<810461f3>] __wake_up_common+0x39/0x59 [<81046346>] __wake_up+0x29/0x3b [<811b8733>] tty_wakeup+0x49/0x51 [<811c3568>] uart_write_wakeup+0x17/0x19 [<811c5dc1>] serial8250_tx_chars+0xbc/0xfb [<811c5f28>] serial8250_handle_irq+0x54/0x6a [<811c5f57>] serial8250_default_handle_irq+0x19/0x1c [<811c56d8>] serial8250_interrupt+0x38/0x9e [<810510e7>] handle_irq_event_percpu+0x5f/0x1e2 [<81051296>] handle_irq_event+0x2c/0x43 [<81052cee>] handle_level_irq+0x57/0x80 [<81002a72>] handle_irq+0x46/0x5c [<810027df>] do_IRQ+0x32/0x89 [<8143036e>] common_interrupt+0x2e/0x33 [<8142f23c>] _raw_spin_unlock_irqrestore+0x3f/0x49 [<811c25a4>] uart_start+0x2d/0x32 [<811c2c04>] uart_write+0xc7/0xd6 [<811bc6f6>] n_tty_write+0xb8/0x35e [<811b9beb>] tty_write+0x163/0x1e4 [<811b9cd9>] redirected_tty_write+0x6d/0x75 [<810b6ed6>] vfs_write+0x75/0xb0 [<810b7265>] SyS_write+0x44/0x77 [<8142f8ee>] syscall_call+0x7/0xb -> #1 (&tty->write_wait){-.....}: [<8104a942>] lock_acquire+0x92/0x101 [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e [<81046332>] __wake_up+0x15/0x3b [<811b8733>] tty_wakeup+0x49/0x51 [<811c3568>] uart_write_wakeup+0x17/0x19 [<811c5dc1>] serial8250_tx_chars+0xbc/0xfb [<811c5f28>] serial8250_handle_irq+0x54/0x6a [<811c5f57>] serial8250_default_handle_irq+0x19/0x1c [<811c56d8>] serial8250_interrupt+0x38/0x9e [<810510e7>] handle_irq_event_percpu+0x5f/0x1e2 [<81051296>] handle_irq_event+0x2c/0x43 [<81052cee>] handle_level_irq+0x57/0x80 [<81002a72>] handle_irq+0x46/0x5c [<810027df>] do_IRQ+0x32/0x89 [<8143036e>] common_interrupt+0x2e/0x33 [<8142f23c>] _raw_spin_unlock_irqrestore+0x3f/0x49 [<811c25a4>] uart_start+0x2d/0x32 [<811c2c04>] uart_write+0xc7/0xd6 [<811bc6f6>] n_tty_write+0xb8/0x35e [<811b9beb>] tty_write+0x163/0x1e4 [<811b9cd9>] redirected_tty_write+0x6d/0x75 [<810b6ed6>] vfs_write+0x75/0xb0 [<810b7265>] SyS_write+0x44/0x77 [<8142f8ee>] syscall_call+0x7/0xb -> #0 (&port_lock_key){-.....}: [<8104a62d>] __lock_acquire+0x9ea/0xc6d [<8104a942>] lock_acquire+0x92/0x101 [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e [<811c60be>] serial8250_console_write+0x8c/0x10c [<8104e402>] call_console_drivers.constprop.31+0x87/0x118 [<8104f5d5>] console_unlock+0x1d7/0x398 [<8104fb70>] vprintk_emit+0x3da/0x3e4 [<81425f76>] printk+0x17/0x19 [<8105bfa0>] clockevents_program_min_delta+0x104/0x116 [<8105c548>] clockevents_program_event+0xe7/0xf3 [<8105cc1c>] tick_program_event+0x1e/0x23 [<8103c43c>] hrtimer_force_reprogram+0x88/0x8f [<8103c49e>] __remove_hrtimer+0x5b/0x79 [<8103cb21>] hrtimer_try_to_cancel+0x49/0x66 [<8103cb4b>] hrtimer_cancel+0xd/0x18 [<8107f102>] perf_swevent_cancel_hrtimer.part.60+0x2b/0x30 [<81080705>] task_clock_event_stop+0x20/0x64 [<81080756>] task_clock_event_del+0xd/0xf [<81081350>] event_sched_out+0xab/0x11e [<810813e0>] group_sched_out+0x1d/0x66 [<81081682>] ctx_sched_out+0xaf/0xbf [<81081e04>] __perf_event_task_sched_out+0x1ed/0x34f [<8142cacc>] __schedule+0x4c6/0x4cb [<8142cae0>] schedule+0xf/0x11 [<8142f9a6>] work_resched+0x5/0x30 other info that might help us debug this: Chain exists of: &port_lock_key --> &ctx->lock --> hrtimer_bases.lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(hrtimer_bases.lock); lock(&ctx->lock); lock(hrtimer_bases.lock); lock(&port_lock_key); *** DEADLOCK *** 4 locks held by trinity-main/74: #0: (&rq->lock){-.-.-.}, at: [<8142c6f3>] __schedule+0xed/0x4cb #1: (&ctx->lock){......}, at: [<81081df3>] __perf_event_task_sched_out+0x1dc/0x34f #2: (hrtimer_bases.lock){-.-...}, at: [<8103caeb>] hrtimer_try_to_cancel+0x13/0x66 #3: (console_lock){+.+...}, at: [<8104fb5d>] vprintk_emit+0x3c7/0x3e4 stack backtrace: CPU: 0 PID: 74 Comm: trinity-main Not tainted 3.15.0-rc8-06195-g939f04be #2 00000000 81c3a310 8b995c14 81426f69 8b995c44 81425a99 8161f671 8161f570 8161f538 8161f559 8161f538 8b995c78 8b142bb0 00000004 8b142fdc 8b142bb0 8b995ca8 8104a62d 8b142fac 000016f2 81c3a310 00000001 00000001 00000003 Call Trace: [<81426f69>] dump_stack+0x16/0x18 [<81425a99>] print_circular_bug+0x18f/0x19c [<8104a62d>] __lock_acquire+0x9ea/0xc6d [<8104a942>] lock_acquire+0x92/0x101 [<811c60be>] ? serial8250_console_write+0x8c/0x10c [<811c6032>] ? wait_for_xmitr+0x76/0x76 [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e [<811c60be>] ? serial8250_console_write+0x8c/0x10c [<811c60be>] serial8250_console_write+0x8c/0x10c [<8104af87>] ? lock_release+0x191/0x223 [<811c6032>] ? wait_for_xmitr+0x76/0x76 [<8104e402>] call_console_drivers.constprop.31+0x87/0x118 [<8104f5d5>] console_unlock+0x1d7/0x398 [<8104fb70>] vprintk_emit+0x3da/0x3e4 [<81425f76>] printk+0x17/0x19 [<8105bfa0>] clockevents_program_min_delta+0x104/0x116 [<8105cc1c>] tick_program_event+0x1e/0x23 [<8103c43c>] hrtimer_force_reprogram+0x88/0x8f [<8103c49e>] __remove_hrtimer+0x5b/0x79 [<8103cb21>] hrtimer_try_to_cancel+0x49/0x66 [<8103cb4b>] hrtimer_cancel+0xd/0x18 [<8107f102>] perf_swevent_cancel_hrtimer.part.60+0x2b/0x30 [<81080705>] task_clock_event_stop+0x20/0x64 [<81080756>] task_clock_event_del+0xd/0xf [<81081350>] event_sched_out+0xab/0x11e [<810813e0>] group_sched_out+0x1d/0x66 [<81081682>] ctx_sched_out+0xaf/0xbf [<81081e04>] __perf_event_task_sched_out+0x1ed/0x34f [<8104416d>] ? __dequeue_entity+0x23/0x27 [<81044505>] ? pick_next_task_fair+0xb1/0x120 [<8142cacc>] __schedule+0x4c6/0x4cb [<81047574>] ? trace_hardirqs_off_caller+0xd7/0x108 [<810475b0>] ? trace_hardirqs_off+0xb/0xd [<81056346>] ? rcu_irq_exit+0x64/0x77 Fix the problem by using printk_deferred() which does not call into the scheduler. Reported-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
John Stultz authored
commit aac74dc4 upstream. After learning we'll need some sort of deferred printk functionality in the timekeeping core, Peter suggested we rename the printk_sched function so it can be reused by needed subsystems. This only changes the function name. No logic changes. Signed-off-by:
John Stultz <john.stultz@linaro.org> Reviewed-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Jan Kara <jack@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jiri Bohac <jbohac@suse.cz> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by:
-
David Rientjes authored
commit b104a35d upstream. The page allocator relies on __GFP_WAIT to determine if ALLOC_CPUSET should be set in allocflags. ALLOC_CPUSET controls if a page allocation should be restricted only to the set of allowed cpuset mems. Transparent hugepages clears __GFP_WAIT when defrag is disabled to prevent the fault path from using memory compaction or direct reclaim. Thus, it is unfairly able to allocate outside of its cpuset mems restriction as a side-effect. This patch ensures that ALLOC_CPUSET is only cleared when the gfp mask is truly GFP_ATOMIC by verifying it is also not a thp allocation. Signed-off-by:
David Rientjes <rientjes@google.com> Reported-by:
Alex Thorlton <athorlton@sgi.com> Tested-by:
-
James Bottomley authored
commit 89fb4cd1 upstream. Flush commands don't transfer data and thus need to be special cased in the I/O completion handler so that we can propagate errors to the block layer and filesystem. Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Reported-by:
Steven Haber <steven@qumulo.com> Tested-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Konstantin Khlebnikov authored
commit 811a2407 upstream. On LPAE, each level 1 (pgd) page table entry maps 1GiB, and the level 2 (pmd) entries map 2MiB. When the identity mapping is created on LPAE, the pgd pointers are copied from the swapper_pg_dir. If we find that we need to modify the contents of a pmd, we allocate a new empty pmd table and insert it into the appropriate 1GB slot, before then filling it with the identity mapping. However, if the 1GB slot covers the kernel lowmem mappings, we obliterate those mappings. When replacing a PMD, first copy the old PMD contents to the new PMD, so that we preserve the existing mappings, particularly the mappings of the kernel itself. [rewrote commit message and added code comment -- rmk] Fixes: ae2de101 ("ARM: LPAE: Add identity mapping support for the 3-level page table format") Signed-off-by:
Konstantin Khlebnikov <k.khlebnikov@samsung.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Milan Broz authored
commit 4c63f83c upstream. Th AF_ALG socket was missing a security label (e.g. SELinux) which means that socket was in "unlabeled" state. This was recently demonstrated in the cryptsetup package (cryptsetup v1.6.5 and later.) See https://bugzilla.redhat.com/show_bug.cgi?id=1115120 This patch clones the sock's label from the parent sock and resolves the issue (similar to AF_BLUETOOTH protocol family). Signed-off-by:
Milan Broz <gmazyland@gmail.com> Acked-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
- 31 Jul, 2014 11 commits
-
-
Greg Kroah-Hartman authored
-
Catalin Marinas authored
commit 7f88f88f upstream. Commit 248ac0e1 ("mm/vmalloc: remove guard page from between vmap blocks") had the side effect of making vmap_area.va_end member point to the next vmap_area.va_start. This was creating an artificial reference to vmalloc'ed objects and kmemleak was rarely reporting vmalloc() leaks. This patch marks the vmap_area containing pointers explicitly and reduces the min ref_count to 2 as vm_struct still contains a reference to the vmalloc'ed object. The kmemleak add_scan_area() function has been improved to allow a SIZE_MAX argument covering the rest of the object (for simpler calling sites). Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Qiang Huang <h.huangqiang@huawei.com> Signed-off-by:
-
Xi Wang authored
commit a3860c1c upstream. ULONG_MAX is often used to check for integer overflow when calculating allocation size. While ULONG_MAX happens to work on most systems, there is no guarantee that `size_t' must be the same size as `long'. This patch introduces SIZE_MAX, the maximum value of `size_t', to improve portability and readability for allocation size validation. Signed-off-by:
Xi Wang <xi.wang@gmail.com> Acked-by:
Alex Elder <elder@dreamhost.com> Cc: David Airlie <airlied@linux.ie> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Martin Schwidefsky authored
commit dab6cf55 upstream. The PSW mask check of the PTRACE_POKEUSR_AREA command is incorrect. The PSW_MASK_USER define contains the PSW_MASK_ASC bits, the ptrace interface accepts all combinations for the address-space-control bits. To protect the kernel space the PSW mask check in ptrace needs to reject the address-space-control bit combination for home space. Fixes CVE-2014-3534 Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Linus Torvalds authored
commit 2062afb4 upstream. Michel Dänzer and a couple of other people reported inexplicable random oopses in the scheduler, and the cause turns out to be gcc mis-compiling the load_balance() function when debugging is enabled. The gcc bug apparently goes back to gcc-4.5, but slight optimization changes means that it now showed up as a problem in 4.9.0 and 4.9.1. The instruction scheduling problem causes gcc to schedule a spill operation to before the stack frame has been created, which in turn can corrupt the spilled value if an interrupt comes in. There may be other effects of this bug too, but that's the code generation problem seen in Michel's case. This is fixed in current gcc HEAD, but the workaround as suggested by Markus Trippelsdorf is pretty simple: use -fno-var-tracking-assignments when compiling the kernel, which disables the gcc code that causes the problem. This can result in slightly worse debug information for variable accesses, but that is infinitely preferable to actual code generation problems. Doing this unconditionally (not just for CONFIG_DEBUG_INFO) also allows non-debug builds to verify that the debug build would be identical: we can do export GCC_COMPARE_DEBUG=1 to make gcc internally verify that the result of the build is independent of the "-g" flag (it will make the compiler build everything twice, toggling the debug flag, and compare the results). Without the "-fno-var-tracking-assignments" option, the build would fail (even with 4.8.3 that didn't show the actual stack frame bug) with a gcc compare failure. See also gcc bugzilla: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61801Reported-by:
Michel Dänzer <michel@daenzer.net> Suggested-by:
Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Jakub Jelinek <jakub@redhat.com> Signed-off-by:
-
Naoya Horiguchi authored
commit 0253d634 upstream. Commit 4a705fef ("hugetlb: fix copy_hugetlb_page_range() to handle migration/hwpoisoned entry") changed the order of huge_ptep_set_wrprotect() and huge_ptep_get(), which leads to breakage in some workloads like hugepage-backed heap allocation via libhugetlbfs. This patch fixes it. The test program for the problem is shown below: $ cat heap.c #include <unistd.h> #include <stdlib.h> #include <string.h> #define HPS 0x200000 int main() { int i; char *p = malloc(HPS); memset(p, '1', HPS); for (i = 0; i < 5; i++) { if (!fork()) { memset(p, '2', HPS); p = malloc(HPS); memset(p, '3', HPS); free(p); return 0; } } sleep(1); free(p); return 0; } $ export HUGETLB_MORECORE=yes ; export HUGETLB_NO_PREFAULT= ; hugectl --heap ./heap Fixes 4a705fef ("hugetlb: fix copy_hugetlb_page_range() to handle migration/hwpoisoned entry"), so is applicable to -stable kernels which include it. Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reported-by:
Guillaume Morin <guillaume@morinfr.org> Suggested-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
Sven Wegener authored
commit 8142b215 upstream. Commit 554086d8 ("x86_32, entry: Do syscall exit work on badsys (CVE-2014-4508)") introduced a regression in the x86_32 syscall entry code, resulting in syscall() not returning proper errors for undefined syscalls on CPUs supporting the sysenter feature. The following code: > int result = syscall(666); > printf("result=%d errno=%d error=%s\n", result, errno, strerror(errno)); results in: > result=666 errno=0 error=Success Obviously, the syscall return value is the called syscall number, but it should have been an ENOSYS error. When run under ptrace it behaves correctly, which makes it hard to debug in the wild: > result=-1 errno=38 error=Function not implemented The %eax register is the return value register. For debugging via ptrace the syscall entry code stores the complete register context on the stack. The badsys handlers only store the ENOSYS error code in the ptrace register set and do not set %eax like a regular syscall handler would. The old resume_userspace call chain contains code that clobbers %eax and it restores %eax from the ptrace registers afterwards. The same goes for the ptrace-enabled call chain. When ptrace is not used, the syscall return value is the passed-in syscall number from the untouched %eax register. Use %eax as the return value register in syscall_badsys and sysenter_badsys, like a real syscall handler does, and have the caller push the value onto the stack for ptrace access. Signed-off-by:
Sven Wegener <sven.wegener@stealer.net> Link: http://lkml.kernel.org/r/alpine.LNX.2.11.1407221022380.31021@titan.int.lan.stealer.netReviewed-and-tested-by:
-
Romain Degez authored
commit b32bfc06 upstream. Add support of the Promise FastTrak TX8660 SATA HBA in ahci mode by registering the board in the ahci_pci_tbl[]. Note: this HBA also provide a hardware RAID mode when activated in BIOS but specific drivers from the manufacturer are required in this case. Signed-off-by:
Romain Degez <romain.degez@gmail.com> Tested-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Tejun Heo authored
commit 1a112d10 upstream. 1871ee13 ("libata: support the ata host which implements a queue depth less than 32") directly used ata_port->scsi_host->can_queue from ata_qc_new() to determine the number of tags supported by the host; unfortunately, SAS controllers doing SATA don't initialize ->scsi_host leading to the following oops. BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 IP: [<ffffffff814e0618>] ata_qc_new_init+0x188/0x1b0 PGD 0 Oops: 0002 [#1] SMP Modules linked in: isci libsas scsi_transport_sas mgag200 drm_kms_helper ttm CPU: 1 PID: 518 Comm: udevd Not tainted 3.16.0-rc6+ #62 Hardware name: Intel Corporation S2600CO/S2600CO, BIOS SE5C600.86B.02.02.0002.122320131210 12/23/2013 task: ffff880c1a00b280 ti: ffff88061a000000 task.ti: ffff88061a000000 RIP: 0010:[<ffffffff814e0618>] [<ffffffff814e0618>] ata_qc_new_init+0x188/0x1b0 RSP: 0018:ffff88061a003ae8 EFLAGS: 00010012 RAX: 0000000000000001 RBX: ffff88000241ca80 RCX: 00000000000000fa RDX: 0000000000000020 RSI: 0000000000000020 RDI: ffff8806194aa298 RBP: ffff88061a003ae8 R08: ffff8806194a8000 R09: 0000000000000000 R10: 0000000000000000 R11: ffff88000241ca80 R12: ffff88061ad58200 R13: ffff8806194aa298 R14: ffffffff814e67a0 R15: ffff8806194a8000 FS: 00007f3ad7fe3840(0000) GS:ffff880627620000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000058 CR3: 000000061a118000 CR4: 00000000001407e0 Stack: ffff88061a003b20 ffffffff814e96e1 ffff88000241ca80 ffff88061ad58200 ffff8800b6bf6000 ffff880c1c988000 ffff880619903850 ffff88061a003b68 ffffffffa0056ce1 ffff88061a003b48 0000000013d6e6f8 ffff88000241ca80 Call Trace: [<ffffffff814e96e1>] ata_sas_queuecmd+0xa1/0x430 [<ffffffffa0056ce1>] sas_queuecommand+0x191/0x220 [libsas] [<ffffffff8149afee>] scsi_dispatch_cmd+0x10e/0x300 [<ffffffff814a3bc5>] scsi_request_fn+0x2f5/0x550 [<ffffffff81317613>] __blk_run_queue+0x33/0x40 [<ffffffff8131781a>] queue_unplugged+0x2a/0x90 [<ffffffff8131ceb4>] blk_flush_plug_list+0x1b4/0x210 [<ffffffff8131d274>] blk_finish_plug+0x14/0x50 [<ffffffff8117eaa8>] __do_page_cache_readahead+0x198/0x1f0 [<ffffffff8117ee21>] force_page_cache_readahead+0x31/0x50 [<ffffffff8117ee7e>] page_cache_sync_readahead+0x3e/0x50 [<ffffffff81172ac6>] generic_file_read_iter+0x496/0x5a0 [<ffffffff81219897>] blkdev_read_iter+0x37/0x40 [<ffffffff811e307e>] new_sync_read+0x7e/0xb0 [<ffffffff811e3734>] vfs_read+0x94/0x170 [<ffffffff811e43c6>] SyS_read+0x46/0xb0 [<ffffffff811e33d1>] ? SyS_lseek+0x91/0xb0 [<ffffffff8171ee29>] system_call_fastpath+0x16/0x1b Code: 00 00 00 88 50 29 83 7f 08 01 19 d2 83 e2 f0 83 ea 50 88 50 34 c6 81 1d 02 00 00 40 c6 81 17 02 00 00 00 5d c3 66 0f 1f 44 00 00 <89> 14 25 58 00 00 00 Fix it by introducing ata_host->n_tags which is initialized to ATA_MAX_QUEUE - 1 in ata_host_init() for SAS controllers and set to scsi_host_template->can_queue in ata_host_register() for !SAS ones. As SAS hosts are never registered, this will give them the same ATA_MAX_QUEUE - 1 as before. Note that we can't use scsi_host->can_queue directly for SAS hosts anyway as they can go higher than the libata maximum. Signed-off-by:
Mike Qiu <qiudayu@linux.vnet.ibm.com> Reported-by:
Jesse Brandeburg <jesse.brandeburg@gmail.com> Reported-by:
Peter Hurley <peter@hurleysoftware.com> Reported-by:
Peter Zijlstra <peterz@infradead.org> Tested-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Fixes: 1871ee13 ("libata: support the ata host which implements a queue depth less than 32") Cc: Kevin Hao <haokexin@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Kevin Hao authored
commit 1871ee13 upstream. The sata on fsl mpc8315e is broken after the commit 8a4aeec8 ("libata/ahci: accommodate tag ordered controllers"). The reason is that the ata controller on this SoC only implement a queue depth of 16. When issuing the commands in tag order, all the commands in tag 16 ~ 31 are mapped to tag 0 unconditionally and then causes the sata malfunction. It makes no senses to use a 32 queue in software while the hardware has less queue depth. So consider the queue depth implemented by the hardware when requesting a command tag. Fixes: 8a4aeec8 ("libata/ahci: accommodate tag ordered controllers") Signed-off-by:
Kevin Hao <haokexin@gmail.com> Acked-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Christoph Hellwig authored
commit d45b3279 upstream. There is no inherent reason why the last put of a tag structure must be the one for the Scsi_Host, as device model objects can be held for arbitrary periods. Merge blk_free_tags and __blk_free_tags into a single funtion that just release a references and get rid of the BUG() when the host reference wasn't the last. Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
- 28 Jul, 2014 10 commits
-
-
Greg Kroah-Hartman authored
-
Takao Indoh authored
commit 3a93c841 upstream. This patch disables translation(dma-remapping) before its initialization if it is already enabled. This is needed for kexec/kdump boot. If dma-remapping is enabled in the first kernel, it need to be disabled before initializing its page table during second kernel boot. Wei Hu also reported that this is needed when second kernel boots with intel_iommu=off. Basically iommu->gcmd is used to know whether translation is enabled or disabled, but it is always zero at boot time even when translation is enabled since iommu->gcmd is initialized without considering such a case. Therefor this patch synchronizes iommu->gcmd value with global command register when iommu structure is allocated. Signed-off-by:
Takao Indoh <indou.takao@jp.fujitsu.com> Signed-off-by:
Joerg Roedel <joro@8bytes.org> [wyj: Backported to 3.4: adjust context] Signed-off-by:
Yijing Wang <wangyijing@huawei.com> Signed-off-by:
-
Takashi Iwai authored
commit 4320f6b1 upstream. The commit [247bc037: PM / Sleep: Mitigate race between the freezer and request_firmware()] introduced the finer state control, but it also leads to a new bug; for example, a bug report regarding the firmware loading of intel BT device at suspend/resume: https://bugzilla.novell.com/show_bug.cgi?id=873790 The root cause seems to be a small window between the process resume and the clear of usermodehelper lock. The request_firmware() function checks the UMH lock and gives up when it's in UMH_DISABLE state. This is for avoiding the invalid f/w loading during suspend/resume phase. The problem is, however, that usermodehelper_enable() is called at the end of thaw_processes(). Thus, a thawed process in between can kick off the f/w loader code path (in this case, via btusb_setup_intel()) even before the call of usermodehelper_enable(). Then usermodehelper_read_trylock() returns an error and request_firmware() spews WARN_ON() in the end. This oneliner patch fixes the issue just by setting to UMH_FREEZING state again before restarting tasks, so that the call of request_firmware() will be blocked until the end of this function instead of returning an error. Fixes: 247bc037 (PM / Sleep: Mitigate race between the freezer and request_firmware()) Link: https://bugzilla.novell.com/show_bug.cgi?id=873790Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
John Stultz authored
commit 16927776 upstream. Sharvil noticed with the posix timer_settime interface, using the CLOCK_REALTIME_ALARM or CLOCK_BOOTTIME_ALARM clockid, if the users tried to specify a relative time timer, it would incorrectly be treated as absolute regardless of the state of the flags argument. This patch corrects this, properly checking the absolute/relative flag, as well as adds further error checking that no invalid flag bits are set. Reported-by:
Sharvil Nanavati <sharvil@google.com> Signed-off-by:
-
Alex Deucher authored
commit 0ac66eff upstream. In some cases we fetch the edid in the detect() callback in order to determine what sort of monitor is connected. If that happens, don't fetch the edid again in the get_modes() callback or we will leak the edid. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Amitkumar Karwar authored
commit d76744a9 upstream. https://bugzilla.kernel.org/show_bug.cgi?id=70191 https://bugzilla.kernel.org/show_bug.cgi?id=77581 It is observed that sometimes Tx packet is downloaded without adding driver's txpd header. This results in firmware parsing garbage data as packet length. Sometimes firmware is unable to read the packet if length comes out as invalid. This stops further traffic and timeout occurs. The root cause is uninitialized fields in tx_info(skb->cb) of packet used to get garbage values. In this case if MWIFIEX_BUF_FLAG_REQUEUED_PKT flag is mistakenly set, txpd header was skipped. This patch makes sure that tx_info is correctly initialized to fix the problem. Reported-by:
Andrew Wiley <wiley.andrew.j@gmail.com> Reported-by:
Linus Gasser <list@markas-al-nour.org> Reported-by:
Michael Hirsch <hirsch@teufel.de> Tested-by:
Xinming Hu <huxm@marvell.com> Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Maithili Hinge <maithili@marvell.com> Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
HATAYAMA Daisuke authored
commit b292d7a1 upstream. Currently, any NMI is falsely handled by a NMI handler of NMI watchdog if CondChgd bit in MSR_CORE_PERF_GLOBAL_STATUS MSR is set. For example, we use external NMI to make system panic to get crash dump, but in this case, the external NMI is falsely handled do to the issue. This commit deals with the issue simply by ignoring CondChgd bit. Here is explanation in detail. On x86 NMI watchdog uses performance monitoring feature to periodically signal NMI each time performance counter gets overflowed. intel_pmu_handle_irq() is called as a NMI_LOCAL handler from a NMI handler of NMI watchdog, perf_event_nmi_handler(). It identifies an owner of a given NMI by looking at overflow status bits in MSR_CORE_PERF_GLOBAL_STATUS MSR. If some of the bits are set, then it handles the given NMI as its own NMI. The problem is that the intel_pmu_handle_irq() doesn't distinguish CondChgd bit from other bits. Unlike the other status bits, CondChgd bit doesn't represent overflow status for performance counters. Thus, CondChgd bit cannot be thought of as a mark indicating a given NMI is NMI watchdog's. As a result, if CondChgd bit is set, any NMI is falsely handled by the NMI handler of NMI watchdog. Also, if type of the falsely handled NMI is either NMI_UNKNOWN, NMI_SERR or NMI_IO_CHECK, the corresponding action is never performed until CondChgd bit is cleared. I noticed this behavior on systems with Ivy Bridge processors: Intel Xeon CPU E5-2630 v2 and Intel Xeon CPU E7-8890 v2. On both systems, CondChgd bit in MSR_CORE_PERF_GLOBAL_STATUS MSR has already been set in the beginning at boot. Then the CondChgd bit is immediately cleared by next wrmsr to MSR_CORE_PERF_GLOBAL_CTRL MSR and appears to remain 0. On the other hand, on older processors such as Nehalem, Xeon E7540, CondChgd bit is not set in the beginning at boot. I'm not sure about exact behavior of CondChgd bit, in particular when this bit is set. Although I read Intel System Programmer's Manual to figure out that, the descriptions I found are: In 18.9.1: "The MSR_PERF_GLOBAL_STATUS MSR also provides a ¡sticky bit¢ to indicate changes to the state of performancmonitoring hardware" In Table 35-2 IA-32 Architectural MSRs 63 CondChg: status bits of this register has changed. These are different from the bahviour I see on the actual system as I explained above. At least, I think ignoring CondChgd bit should be enough for NMI watchdog perspective. Signed-off-by:
HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by:
Don Zickus <dzickus@redhat.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 10ec9472 ] There is a benign buffer overflow in ip_options_compile spotted by AddressSanitizer[1] : Its benign because we always can access one extra byte in skb->head (because header is followed by struct skb_shared_info), and in this case this byte is not even used. [28504.910798] ================================================================== [28504.912046] AddressSanitizer: heap-buffer-overflow in ip_options_compile [28504.913170] Read of size 1 by thread T15843: [28504.914026] [<ffffffff81802f91>] ip_options_compile+0x121/0x9c0 [28504.915394] [<ffffffff81804a0d>] ip_options_get_from_user+0xad/0x120 [28504.916843] [<ffffffff8180dedf>] do_ip_setsockopt.isra.15+0x8df/0x1630 [28504.918175] [<ffffffff8180ec60>] ip_setsockopt+0x30/0xa0 [28504.919490] [<ffffffff8181e59b>] tcp_setsockopt+0x5b/0x90 [28504.920835] [<ffffffff8177462f>] sock_common_setsockopt+0x5f/0x70 [28504.922208] [<ffffffff817729c2>] SyS_setsockopt+0xa2/0x140 [28504.923459] [<ffffffff818cfb69>] system_call_fastpath+0x16/0x1b [28504.924722] [28504.925106] Allocated by thread T15843: [28504.925815] [<ffffffff81804995>] ip_options_get_from_user+0x35/0x120 [28504.926884] [<ffffffff8180dedf>] do_ip_setsockopt.isra.15+0x8df/0x1630 [28504.927975] [<ffffffff8180ec60>] ip_setsockopt+0x30/0xa0 [28504.929175] [<ffffffff8181e59b>] tcp_setsockopt+0x5b/0x90 [28504.930400] [<ffffffff8177462f>] sock_common_setsockopt+0x5f/0x70 [28504.931677] [<ffffffff817729c2>] SyS_setsockopt+0xa2/0x140 [28504.932851] [<ffffffff818cfb69>] system_call_fastpath+0x16/0x1b [28504.934018] [28504.934377] The buggy address ffff880026382828 is located 0 bytes to the right [28504.934377] of 40-byte region [ffff880026382800, ffff880026382828) [28504.937144] [28504.937474] Memory state around the buggy address: [28504.938430] ffff880026382300: ........ rrrrrrrr rrrrrrrr rrrrrrrr [28504.939884] ffff880026382400: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28504.941294] ffff880026382500: .....rrr rrrrrrrr rrrrrrrr rrrrrrrr [28504.942504] ffff880026382600: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28504.943483] ffff880026382700: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28504.944511] >ffff880026382800: .....rrr rrrrrrrr rrrrrrrr rrrrrrrr [28504.945573] ^ [28504.946277] ffff880026382900: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28505.094949] ffff880026382a00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28505.096114] ffff880026382b00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28505.097116] ffff880026382c00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28505.098472] ffff880026382d00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28505.099804] Legend: [28505.100269] f - 8 freed bytes [28505.100884] r - 8 redzone bytes [28505.101649] . - 8 allocated bytes [28505.102406] x=1..7 - x allocated bytes + (8-x) redzone bytes [28505.103637] ================================================================== [1] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernelSigned-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit 640d7efe ] *_result[len] is parsed as *(_result[len]) which is not at all what we want to touch here. Signed-off-by:
-
Manuel Schölling authored
[ Upstream commit 84a7c0b1 ] dns_query() credulously assumes that keys are null-terminated and returns a copy of a memory block that is off by one. Signed-off-by:
Manuel Schölling <manuel.schoelling@gmx.de> Signed-off-by:
-
