- 08 Dec, 2008 1 commit
-
-
Dan Williams authored
Mapping the destination multiple times is a misuse of the dma-api. Since the destination may be reused as a source, ensure that it is only mapped once and that it is mapped bidirectionally. This appears to add ugliness on the unmap side in that it always reads back the destination address from the descriptor, but gcc can determine that dma_unmap is a nop and not emit the code that calculates its arguments. Cc: <stable@kernel.org> Cc: Saeed Bishara <saeed@marvell.com> Acked-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
- 04 Dec, 2008 2 commits
-
-
Dan Williams authored
There is a possibility to have two devices registered with the same id. Cc: <stable@kernel.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
As part of the ioat_dma self-test it performs a printk from a completion callback. Depending on the system console configuration this output can take longer than a millisecond causing the self-test to fail. Introduce a completion with a generous timeout to mitigate this failure. Cc: <stable@kernel.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
- 13 Nov, 2008 37 commits
-
-
Linus Torvalds authored
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: fix init_idle()'s use of sched_clock() sched: fix stale value in average load per task
-
Rodolfo Giometti authored
Signed-off-by: Rodolfo Giometti <giometti@linux.it> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Rodolfo Giometti authored
C2port implements a two wire serial communication protocol (bit banging) designed to enable in-system programming, debugging, and boundary-scan testing on low pin-count Silicon Labs devices. Currently this code supports only flash programming through sysfs interface but extensions shoud be easy to add. Signed-off-by: Rodolfo Giometti <giometti@linux.it> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Madhusudhan Chikkature authored
Add a brief document about omap2430/3430 HDQ/1-wire driver. Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Madhusudhan Chikkature authored
Provide the BQ27000 slave interface driver. Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Madhusudhan Chikkature authored
The HDQ/1-Wire module of TI OMAP2430/3430 platforms implement the hardware protocol of the master functions of the Benchmark HDQ and the Dallas Semiconductor 1-Wire protocols. These protocols use a single wire for communication between the master (HDQ/1-Wire controller) and the slave (HDQ/1-Wire external compliant device). This patch provides the HDQ driver to suppport TI OMAP2430/3430 platforms. Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Madhusudhan Chikkature authored
Export the w1_read_8 function for use of drivers. The OMAP HDQ driver(drivers/w1/masters/omap_hdq.c) uses this function. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mark Jackson authored
Add support for the Dallas DS1390/93/94 SPI RTC chip. Signed-off-by: Mark Jackson <mpfj@mimc.co.uk> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Martyn Welch authored
Provide the basic "get" and "set" functionality for the Epson RX-8581 I2C RTC. It currently does not support the RTC's Alarm or Fixed-cycle timer. [akpm@linux-foundation.org: need log2.h for ilog2(), remove unneeded initialisation] Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mark Brown authored
This adds support for the RTC provided by the Wolfson Microelectronics WM8350. This driver was originally written by Graeme Gregory and Liam Girdwood, though it has been modified since then to update it to current mainline coding standards and for API completeness. [akpm@linux-foundation.org: s/schedule_timeout_interruptible/schedule_timeout_uninterruptible/ to prevent bogus timeout when signal_pending()] Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Liam Girdwood <linux@wolfsonmicro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Darrick J. Wong authored
The ics932s401 is a clock generator chip. This driver allows users to read the current clock outputs. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Darrick J. Wong authored
New driver to play with. As Jean mentioned a couple of years ago, this chip is a beast with odd combinations of 8 fans, 4 temperatures, and 13 voltage sensors. This driver has been tested on an IntelliStation Z30. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Pavel Machek authored
This adds a driver to the accelerometer sensor found in several HP laptops (under the commercial names of "HP Mobile Data Protection System 3D" and "HP 3D driveguard"). It tries to have more or less the same interfaces as the hdaps and other accelerometer drivers: in sysfs and as a joystick. This driver was first written by Yan Burman. Eric Piel has updated it and slimed it up (including the removal of an interface to access to the free-fall feature of the sensor because it is not reliable enough for now). Pavel Machek removed few more features and switched locking from semaphore to mutex. Several people have contributed to the database of the axes. [eric.piel@tremplin-utc.net: LIS3LV02D: Conform to the new ACPI API] Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Yan Burman <burman.yan@gmail.com> Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
KAMEZAWA Hiroyuki authored
The start pfn calculation in page_cgroup's memory hotplug notifier chain is wrong. Tested-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Theodore Tso authored
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jean-Christophe Lallemand authored
We're working with an AT91SAM9263 Rev B in our design and I experienced some inconsistency in spi-based touchscreen usage between our board and the Atmel evaluation kit we have that runs on a Rev A chip. The data was apparently delayed by 1 byte and got ridiculous data out of the touchscreen driver, very strange. As everything looked normal in the spi, touchscreen and dma logs, I contacted the Atmel support and they triggered me on a new HW bug that appeared in the Rev B SPI controller. The problem is that the SPI controller on the Rev B needs that the software reset is performed two times so that it's performed correctly. Applying the patch below solves the issue on my Rev B board. I've tested it as well on my Rev A evaluation kit and it has apparently no unwanted side effect, things continue to work as expected. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Darrick J. Wong authored
The adt7468 is a follow-on to the adt7463, so plumb in adt7468 support along the same code paths. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Darrick J. Wong authored
Implement correct range checking for adt7470 to prevent userland from writing impossible values into the chip, and cap out-of-range values per standard hwmon conventions. Implement correct rounding of input values per standard hwmon conventions. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Darrick J. Wong authored
Implement correct range checking for adt7470 to prevent userland from writing impossible values into the chip, and cap out-of-range values per standard hwmon conventions. Implement correct rounding of input values per standard hwmon conventions. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
We only need the cacheline padding on SMP kernels. Saves 6k: text data bss dec hex filename 5713 388 8840 14941 3a5d kernel/kprobes.o 5713 388 2632 8733 221d kernel/kprobes.o Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Marco Stornelli authored
xip documentation updated: - change "get_xip_page" to "get_xip_mem"; - explain changed function parameters Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Randy Dunlap authored
Add printk-formats.txt so that we don't have to keep fixing the same things over and over again. <wishful thinking> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
It mistakenly assumes that a static local in an inlined function is a kernel-wide singleton. It also has no callers, so let's remove it. Cc: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Eric W. Biederman authored
In the last refactoring of shrink_submounts a variable was not completely renamed. So finish the renaming of mnt to m now. Without this if you attempt to mount an nfs mount that has both automatic nfs sub mounts on it, and has normal mounts on it. The unmount will succeed when it should not. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@ZenIV.linux.org.uk Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
KOSAKI Motohiro authored
lockdep warns about following message at boot time on one of my test machine. Then, schedule_on_each_cpu() sholdn't be called when the task have mmap_sem. Actually, lru_add_drain_all() exist to prevent the unevictalble pages stay on reclaimable lru list. but currenct unevictable code can rescue unevictable pages although it stay on reclaimable list. So removing is better. In addition, this patch add lru_add_drain_all() to sys_mlock() and sys_mlockall(). it isn't must. but it reduce the failure of moving to unevictable list. its failure can rescue in vmscan later. but reducing is better. Note, if above rescuing happend, the Mlocked and the Unevictable field mismatching happend in /proc/meminfo. but it doesn't cause any real trouble. ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.28-rc2-mm1 #2 ------------------------------------------------------- lvm/1103 is trying to acquire lock: (&cpu_hotplug.lock){--..}, at: [<c0130789>] get_online_cpus+0x29/0x50 but task is already holding lock: (&mm->mmap_sem){----}, at: [<c01878ae>] sys_mlockall+0x4e/0xb0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&mm->mmap_sem){----}: [<c0153da2>] check_noncircular+0x82/0x110 [<c0185e6a>] might_fault+0x4a/0xa0 [<c0156161>] validate_chain+0xb11/0x1070 [<c0185e6a>] might_fault+0x4a/0xa0 [<c0156923>] __lock_acquire+0x263/0xa10 [<c015714c>] lock_acquire+0x7c/0xb0 (*) grab mmap_sem [<c0185e6a>] might_fault+0x4a/0xa0 [<c0185e9b>] might_fault+0x7b/0xa0 [<c0185e6a>] might_fault+0x4a/0xa0 [<c0294dd0>] copy_to_user+0x30/0x60 [<c01ae3ec>] filldir+0x7c/0xd0 [<c01e3a6a>] sysfs_readdir+0x11a/0x1f0 (*) grab sysfs_mutex [<c01ae370>] filldir+0x0/0xd0 [<c01ae370>] filldir+0x0/0xd0 [<c01ae4c6>] vfs_readdir+0x86/0xa0 (*) grab i_mutex [<c01ae75b>] sys_getdents+0x6b/0xc0 [<c010355a>] syscall_call+0x7/0xb [<ffffffff>] 0xffffffff -> #2 (sysfs_mutex){--..}: [<c0153da2>] check_noncircular+0x82/0x110 [<c01e3d2c>] sysfs_addrm_start+0x2c/0xc0 [<c0156161>] validate_chain+0xb11/0x1070 [<c01e3d2c>] sysfs_addrm_start+0x2c/0xc0 [<c0156923>] __lock_acquire+0x263/0xa10 [<c015714c>] lock_acquire+0x7c/0xb0 (*) grab sysfs_mutex [<c01e3d2c>] sysfs_addrm_start+0x2c/0xc0 [<c04f8b55>] mutex_lock_nested+0xa5/0x2f0 [<c01e3d2c>] sysfs_addrm_start+0x2c/0xc0 [<c01e3d2c>] sysfs_addrm_start+0x2c/0xc0 [<c01e3d2c>] sysfs_addrm_start+0x2c/0xc0 [<c01e422f>] create_dir+0x3f/0x90 [<c01e42a9>] sysfs_create_dir+0x29/0x50 [<c04faaf5>] _spin_unlock+0x25/0x40 [<c028f21d>] kobject_add_internal+0xcd/0x1a0 [<c028f37a>] kobject_set_name_vargs+0x3a/0x50 [<c028f41d>] kobject_init_and_add+0x2d/0x40 [<c019d4d2>] sysfs_slab_add+0xd2/0x180 [<c019d580>] sysfs_add_func+0x0/0x70 [<c019d5dc>] sysfs_add_func+0x5c/0x70 (*) grab slub_lock [<c01400f2>] run_workqueue+0x172/0x200 [<c014008f>] run_workqueue+0x10f/0x200 [<c0140bd0>] worker_thread+0x0/0xf0 [<c0140c6c>] worker_thread+0x9c/0xf0 [<c0143c80>] autoremove_wake_function+0x0/0x50 [<c0140bd0>] worker_thread+0x0/0xf0 [<c0143972>] kthread+0x42/0x70 [<c0143930>] kthread+0x0/0x70 [<c01042db>] kernel_thread_helper+0x7/0x1c [<ffffffff>] 0xffffffff -> #1 (slub_lock){----}: [<c0153d2d>] check_noncircular+0xd/0x110 [<c04f650f>] slab_cpuup_callback+0x11f/0x1d0 [<c0156161>] validate_chain+0xb11/0x1070 [<c04f650f>] slab_cpuup_callback+0x11f/0x1d0 [<c015433d>] mark_lock+0x35d/0xd00 [<c0156923>] __lock_acquire+0x263/0xa10 [<c015714c>] lock_acquire+0x7c/0xb0 [<c04f650f>] slab_cpuup_callback+0x11f/0x1d0 [<c04f93a3>] down_read+0x43/0x80 [<c04f650f>] slab_cpuup_callback+0x11f/0x1d0 (*) grab slub_lock [<c04f650f>] slab_cpuup_callback+0x11f/0x1d0 [<c04fd9ac>] notifier_call_chain+0x3c/0x70 [<c04f5454>] _cpu_up+0x84/0x110 [<c04f552b>] cpu_up+0x4b/0x70 (*) grab cpu_hotplug.lock [<c06d1530>] kernel_init+0x0/0x170 [<c06d15e5>] kernel_init+0xb5/0x170 [<c06d1530>] kernel_init+0x0/0x170 [<c01042db>] kernel_thread_helper+0x7/0x1c [<ffffffff>] 0xffffffff -> #0 (&cpu_hotplug.lock){--..}: [<c0155bff>] validate_chain+0x5af/0x1070 [<c040f7e0>] dev_status+0x0/0x50 [<c0156923>] __lock_acquire+0x263/0xa10 [<c015714c>] lock_acquire+0x7c/0xb0 [<c0130789>] get_online_cpus+0x29/0x50 [<c04f8b55>] mutex_lock_nested+0xa5/0x2f0 [<c0130789>] get_online_cpus+0x29/0x50 [<c0130789>] get_online_cpus+0x29/0x50 [<c017bc30>] lru_add_drain_per_cpu+0x0/0x10 [<c0130789>] get_online_cpus+0x29/0x50 (*) grab cpu_hotplug.lock [<c0140cf2>] schedule_on_each_cpu+0x32/0xe0 [<c0187095>] __mlock_vma_pages_range+0x85/0x2c0 [<c0156945>] __lock_acquire+0x285/0xa10 [<c0188f09>] vma_merge+0xa9/0x1d0 [<c0187450>] mlock_fixup+0x180/0x200 [<c0187548>] do_mlockall+0x78/0x90 (*) grab mmap_sem [<c01878e1>] sys_mlockall+0x81/0xb0 [<c010355a>] syscall_call+0x7/0xb [<ffffffff>] 0xffffffff other info that might help us debug this: 1 lock held by lvm/1103: #0: (&mm->mmap_sem){----}, at: [<c01878ae>] sys_mlockall+0x4e/0xb0 stack backtrace: Pid: 1103, comm: lvm Not tainted 2.6.28-rc2-mm1 #2 Call Trace: [<c01555fc>] print_circular_bug_tail+0x7c/0xd0 [<c0155bff>] validate_chain+0x5af/0x1070 [<c040f7e0>] dev_status+0x0/0x50 [<c0156923>] __lock_acquire+0x263/0xa10 [<c015714c>] lock_acquire+0x7c/0xb0 [<c0130789>] get_online_cpus+0x29/0x50 [<c04f8b55>] mutex_lock_nested+0xa5/0x2f0 [<c0130789>] get_online_cpus+0x29/0x50 [<c0130789>] get_online_cpus+0x29/0x50 [<c017bc30>] lru_add_drain_per_cpu+0x0/0x10 [<c0130789>] get_online_cpus+0x29/0x50 [<c0140cf2>] schedule_on_each_cpu+0x32/0xe0 [<c0187095>] __mlock_vma_pages_range+0x85/0x2c0 [<c0156945>] __lock_acquire+0x285/0xa10 [<c0188f09>] vma_merge+0xa9/0x1d0 [<c0187450>] mlock_fixup+0x180/0x200 [<c0187548>] do_mlockall+0x78/0x90 [<c01878e1>] sys_mlockall+0x81/0xb0 [<c010355a>] syscall_call+0x7/0xb Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Tested-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Hugh Dickins <hugh@veritas.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Masami Hiramatsu authored
__register_kprobe() can be preempted after checking probing address but before module_text_address() or try_module_get(), and in this interval the module can be unloaded. In that case, try_module_get(probed_mod) will access to invalid address, or kprobe will probe invalid address. This patch uses preempt_disable() to protect it and uses __module_text_address() and __kernel_text_address(). Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Li Zefan authored
With this change, control file 'freezer.state' doesn't exist in root cgroup, making root cgroup unfreezable. I think it's reasonable to disallow freeze tasks in the root cgroup. And then we can avoid fork overhead when freezer subsystem is compiled but not used. Also make writing invalid value to freezer.state returns EINVAL rather than EIO. This is more consistent with other cgroup subsystem. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Paul Menage <menage@google.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: "Serge E. Hallyn" <serue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Li Zefan authored
In theory the task can be moved to another cgroup and the freezer will be freed right after task_lock is dropped, so the lock results in zero protection. But in the case of freezer_fork() no lock is needed, since the task is not in tasklist yet so it won't be moved to another cgroup, so task->cgroups won't be changed or invalidated. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: "Serge E. Hallyn" <serue@us.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
John Linn authored
This driver supports the Xilinx XPS GPIO IP core which has the typical GPIO features. Signed-off-by: Kiran Sutariya <kirans@xilinx.com> Signed-off-by: John Linn <john.linn@xilinx.com> Cc: David Brownell <david-b@pacbell.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: "Grant Likely" <grant.likely@secretlab.ca> Cc: <avorontsov@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Rientjes authored
If all allowable memory is unreclaimable, it is possible to loop forever in the page allocator for ~__GFP_NORETRY allocations. During this time, it is also possible for a task's cpuset to expand its set of allowable nodes so that it now includes free memory. The cached copy of this set, current->mems_allowed, is stale, however, since there has not been a subsequent call to cpuset_update_task_memory_state(). The cached copy of the set of allowable nodes is now updated in the page allocator's slow path so the additional memory is available to get_page_from_freelist(). [akpm@linux-foundation.org: add comment] Signed-off-by: David Rientjes <rientjes@google.com> Cc: Paul Menage <menage@google.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Darrick J. Wong authored
It turns out that edac_mc_del_mc will kobject_put the last kref on the mci object. If the timing is just right, that means that the mci object is freed before before i5000_remove_one has a chance to free the resources associated with it, causing a null pointer exceptions when unloading the driver. Insert a kobject_{get,put} pair so that this doesn't happen. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Cc: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Darrick J. Wong authored
It turns out that if one registers a struct platform_device, the platform device code expects that platform_device.device->driver points to a struct driver inside a struct platform_driver. This is not the case with the ipmi-si, ipmi-msghandler and ibmaem drivers, which causes the suspend/resume hook functions to jump off into nowhere, causing a crash. Make this assumption hold true for these three drivers. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Acked-by: Corey Minyard <cminyard@mvista.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Greg KH <greg@kroah.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nicolas Ferre authored
Changed because old the definition of unsigned long cannot be negative. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reported-by: Roel Kluin <roel.kluin@gmail.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Henrik Rydberg authored
This patch adds accelerometer and temperature sensor support for Macbook 4. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Cc: Nicolas Boichat <nicolas@boichat.ch Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Adam Litke authored
Oops. Part of the hugetlb private reservation code was not fully converted to use hstates. When a huge page must be unmapped from VMAs due to a failed COW, HPAGE_SIZE is used in the call to unmap_hugepage_range() regardless of the page size being used. This works if the VMA is using the default huge page size. Otherwise we might unmap too much, too little, or trigger a BUG_ON. Rare but serious -- fix it. Signed-off-by: Adam Litke <agl@us.ibm.com> Cc: Jon Tollefson <kniht@linux.vnet.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: bnx2: fix poll_controller to pass proper structures and check all rx queues niu: Fix readq implementation when architecture does not provide one. hostap: pad the skb->cb usage in lieu of a proper fix rtl8187 : support for Sitecom WL-168 0001 v4 mac80211: fix notify_mac function rtl8187: Add Abocom USB ID net: put_cmsg_compat + SO_TIMESTAMP[NS]: use same name for value as caller tcp_htcp: last_cong bug fix [netdrvr] smc911x: fix for driver resume (and compilation warning) RDMA/cxgb3: deadlock in iw_cxgb3 can cause hang when configuring interface. cxgb3 - Limit multiqueue setting to msi-x cxgb3 - eeprom read fixes myri10ge: fix stop/go ordering even more
-
Neil Horman authored
Fix bnx2 so that netpoll works properly. Specifically: 1) Fix parameters to bnx2_interrupt to be a struct bnx2_napi rather than a struct net_device 2) Fix poll_controller method to check every queue in the rx case so frames aren't missed Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-