- 22 Aug, 2024 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-08-20 (ice) This series contains updates to ice driver only. Maciej fixes issues with Rx data path on architectures with PAGE_SIZE >= 8192; correcting page reuse usage and calculations for last offset and truesize. Michal corrects assignment of devlink port number to use PF id. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: use internal pf id instead of function number ice: fix truesize operations for PAGE_SIZE >= 8192 ice: fix ICE_LAST_OFFSET formula ice: fix page reuse when PAGE_SIZE is over 8k ==================== Link: https://patch.msgid.link/20240820215620.1245310-1-anthony.l.nguyen@intel.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Somnath Kotur authored
Remove the dma_unmap_page_attrs() call in the driver's XDP_REDIRECT code path. This should have been removed when we let the page pool handle the DMA mapping. This bug causes the warning: WARNING: CPU: 7 PID: 59 at drivers/iommu/dma-iommu.c:1198 iommu_dma_unmap_page+0xd5/0x100 CPU: 7 PID: 59 Comm: ksoftirqd/7 Tainted: G W 6.8.0-1010-gcp #11-Ubuntu Hardware name: Dell Inc. PowerEdge R7525/0PYVT1, BIOS 2.15.2 04/02/2024 RIP: 0010:iommu_dma_unmap_page+0xd5/0x100 Code: 89 ee 48 89 df e8 cb f2 69 ff 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 c9 31 f6 31 ff 45 31 c0 e9 ab 17 71 00 <0f> 0b 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 c9 RSP: 0018:ffffab1fc0597a48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff99ff838280c8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffab1fc0597a78 R08: 0000000000000002 R09: ffffab1fc0597c1c R10: ffffab1fc0597cd3 R11: ffff99ffe375acd8 R12: 00000000e65b9000 R13: 0000000000000050 R14: 0000000000001000 R15: 0000000000000002 FS: 0000000000000000(0000) GS:ffff9a06efb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000565c34c37210 CR3: 00000005c7e3e000 CR4: 0000000000350ef0 ? show_regs+0x6d/0x80 ? __warn+0x89/0x150 ? iommu_dma_unmap_page+0xd5/0x100 ? report_bug+0x16a/0x190 ? handle_bug+0x51/0xa0 ? exc_invalid_op+0x18/0x80 ? iommu_dma_unmap_page+0xd5/0x100 ? iommu_dma_unmap_page+0x35/0x100 dma_unmap_page_attrs+0x55/0x220 ? bpf_prog_4d7e87c0d30db711_xdp_dispatcher+0x64/0x9f bnxt_rx_xdp+0x237/0x520 [bnxt_en] bnxt_rx_pkt+0x640/0xdd0 [bnxt_en] __bnxt_poll_work+0x1a1/0x3d0 [bnxt_en] bnxt_poll+0xaa/0x1e0 [bnxt_en] __napi_poll+0x33/0x1e0 net_rx_action+0x18a/0x2f0 Fixes: 578fcfd2 ("bnxt_en: Let the page pool manage the DMA mapping") Reviewed-by:
Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by:
Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by:
Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20240820203415.168178-1-michael.chan@broadcom.comSigned-off-by:
-
Jakub Kicinski authored
Eric Dumazet says: ==================== ipv6: fix possible UAF in output paths First patch fixes an issue spotted by syzbot, and the two other patches fix error paths after skb_expand_head() adoption. ==================== Link: https://patch.msgid.link/20240820160859.3786976-1-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
If skb_expand_head() returns NULL, skb has been freed and the associated dst/idev could also have been freed. We must use rcu_read_lock() to prevent a possible UAF. Fixes: 0c9f227b ("ipv6: use skb_expand_head in ip6_xmit") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Vasily Averin <vasily.averin@linux.dev> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20240820160859.3786976-4-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
If skb_expand_head() returns NULL, skb has been freed and associated dst/idev could also have been freed. We need to hold rcu_read_lock() to make sure the dst and associated idev are alive. Fixes: 5796015f ("ipv6: allocate enough headroom in ip6_finish_output2()") Signed-off-by:
-
Eric Dumazet authored
syzbot reported an UAF in ip6_send_skb() [1] After ip6_local_out() has returned, we no longer can safely dereference rt, unless we hold rcu_read_lock(). A similar issue has been fixed in commit a688caa3 ("ipv6: take rcu lock in rawv6_send_hdrinc()") Another potential issue in ip6_finish_output2() is handled in a separate patch. [1] BUG: KASAN: slab-use-after-free in ip6_send_skb+0x18d/0x230 net/ipv6/ip6_output.c:1964 Read of size 8 at addr ffff88806dde4858 by task syz.1.380/6530 CPU: 1 UID: 0 PID: 6530 Comm: syz.1.380 Not tainted 6.11.0-rc3-syzkaller-00306-gdf6cbc62 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 ip6_send_skb+0x18d/0x230 net/ipv6/ip6_output.c:1964 rawv6_push_pending_frames+0x75c/0x9e0 net/ipv6/raw.c:588 rawv6_sendmsg+0x19c7/0x23c0 net/ipv6/raw.c:926 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 sock_write_iter+0x2dd/0x400 net/socket.c:1160 do_iter_readv_writev+0x60a/0x890 vfs_writev+0x37c/0xbb0 fs/read_write.c:971 do_writev+0x1b1/0x350 fs/read_write.c:1018 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f936bf79e79 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f936cd7f038 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 00007f936c115f80 RCX: 00007f936bf79e79 RDX: 0000000000000001 RSI: 0000000020000040 RDI: 0000000000000004 RBP: 00007f936bfe7916 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f936c115f80 R15: 00007fff2860a7a8 </TASK> Allocated by task 6530: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:312 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:338 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3988 [inline] slab_alloc_node mm/slub.c:4037 [inline] kmem_cache_alloc_noprof+0x135/0x2a0 mm/slub.c:4044 dst_alloc+0x12b/0x190 net/core/dst.c:89 ip6_blackhole_route+0x59/0x340 net/ipv6/route.c:2670 make_blackhole net/xfrm/xfrm_policy.c:3120 [inline] xfrm_lookup_route+0xd1/0x1c0 net/xfrm/xfrm_policy.c:3313 ip6_dst_lookup_flow+0x13e/0x180 net/ipv6/ip6_output.c:1257 rawv6_sendmsg+0x1283/0x23c0 net/ipv6/raw.c:898 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597 ___sys_sendmsg net/socket.c:2651 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2680 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 45: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579 poison_slab_object+0xe0/0x150 mm/kasan/common.c:240 __kasan_slab_free+0x37/0x60 mm/kasan/common.c:256 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2252 [inline] slab_free mm/slub.c:4473 [inline] kmem_cache_free+0x145/0x350 mm/slub.c:4548 dst_destroy+0x2ac/0x460 net/core/dst.c:124 rcu_do_batch kernel/rcu/tree.c:2569 [inline] rcu_core+0xafd/0x1830 kernel/rcu/tree.c:2843 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 __do_softirq kernel/softirq.c:588 [inline] invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637 irq_exit_rcu+0x9/0x30 kernel/softirq.c:649 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043 asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702 Last potentially related work creation: kasan_save_stack+0x3f/0x60 mm/kasan/common.c:47 __kasan_record_aux_stack+0xac/0xc0 mm/kasan/generic.c:541 __call_rcu_common kernel/rcu/tree.c:3106 [inline] call_rcu+0x167/0xa70 kernel/rcu/tree.c:3210 refdst_drop include/net/dst.h:263 [inline] skb_dst_drop include/net/dst.h:275 [inline] nf_ct_frag6_queue net/ipv6/netfilter/nf_conntrack_reasm.c:306 [inline] nf_ct_frag6_gather+0xb9a/0x2080 net/ipv6/netfilter/nf_conntrack_reasm.c:485 ipv6_defrag+0x2c8/0x3c0 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c:67 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] __ip6_local_out+0x6fa/0x800 net/ipv6/output_core.c:143 ip6_local_out+0x26/0x70 net/ipv6/output_core.c:153 ip6_send_skb+0x112/0x230 net/ipv6/ip6_output.c:1959 rawv6_push_pending_frames+0x75c/0x9e0 net/ipv6/raw.c:588 rawv6_sendmsg+0x19c7/0x23c0 net/ipv6/raw.c:926 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 sock_write_iter+0x2dd/0x400 net/socket.c:1160 do_iter_readv_writev+0x60a/0x890 Fixes: 06254914 ("ipv6: ip6_push_pending_frames() should increment IPSTATS_MIB_OUTDISCARDS") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Reviewed-by:
-
Eric Dumazet authored
netpoll_poll_disable() and netpoll_poll_enable() are only used from core networking code, there is no need to export them. Signed-off-by:
Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240820162053.3870927-1-edumazet@google.comSigned-off-by:
-
Ido Schimmel authored
Source the ethtool library from the correct path and avoid the following error: ./ethtool_lanes.sh: line 14: ./../../../net/forwarding/ethtool_lib.sh: No such file or directory Fixes: 40d269c0 ("selftests: forwarding: Move several selftests") Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
Petr Machata <petrm@nvidia.com> Reviewed-by:
-
Felix Fietkau authored
When assembling fraglist GSO packets, udp4_gro_complete does not set skb->csum_start, which makes the extra validation in __udp_gso_segment fail. Fixes: 89add400 ("net: drop bad gso csum_start and offset in virtio_net_hdr") Signed-off-by:
Felix Fietkau <nbd@nbd.name> Reviewed-by:
Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240819150621.59833-1-nbd@nbd.nameSigned-off-by:
-
- 21 Aug, 2024 16 commits
-
-
Jakub Kicinski authored
Matthieu Baerts says: ==================== mptcp: pm: fix IDs not being reusable Here are more fixes for the MPTCP in-kernel path-manager. In this series, the fixes are around the endpoint IDs not being reusable for on-going connections when re-creating endpoints with previously used IDs. - Patch 1 fixes this case for endpoints being used to send ADD_ADDR. Patch 2 validates this fix. The issue is present since v5.10. - Patch 3 fixes this case for endpoints being used to establish new subflows. Patch 4 validates this fix. The issue is present since v5.10. - Patch 5 fixes this case when all endpoints are flushed. Patch 6 validates this fix. The issue is present since v5.13. - Patch 7 removes a helper that is confusing, and introduced in v5.10. It helps simplifying the next patches. - Patch 8 makes sure a 'subflow' counter is only decremented when removing a 'subflow' endpoint. Can be backported up to v5.13. - Patch 9 is similar, but for a 'signal' counter. Can be backported up to v5.10. - Patch 10 checks the last max accepted ADD_ADDR limit before accepting new ADD_ADDR. For v5.10 as well. - Patch 11 removes a wrong restriction for the userspace PM, added during a refactoring in v6.5. - Patch 12 makes sure the fullmesh mode sets the ID 0 when a new subflow using the source address of the initial subflow is created. Patch 13 covers this case. This issue is present since v5.15. - Patch 14 avoid possible UaF when selecting an address from the endpoints list. ==================== Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-0-38035d40de5b@kernel.orgSigned-off-by:
-
Matthieu Baerts (NGI0) authored
select_local_address() and select_signal_address() both select an endpoint entry from the list inside an RCU protected section, but return a reference to it, to be read later on. If the entry is dereferenced after the RCU unlock, reading info could cause a Use-after-Free. A simple solution is to copy the required info while inside the RCU protected section to avoid any risk of UaF later. The address ID might need to be modified later to handle the ID0 case later, so a copy seems OK to deal with. Reported-by:
Paolo Abeni <pabeni@redhat.com> Closes: https://lore.kernel.org/45cd30d3-7710-491c-ae4d-a1368c00beb1@redhat.com Fixes: 01cacb00 ("mptcp: add netlink-based PM") Cc: stable@vger.kernel.org Reviewed-by:
Mat Martineau <martineau@kernel.org> Signed-off-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-14-38035d40de5b@kernel.orgSigned-off-by:
-
Matthieu Baerts (NGI0) authored
This case was not covered, and the wrong ID was set before the previous commit. The rest is not modified, it is just that it will increase the code coverage. The right address ID can be verified by looking at the packet traces. We could automate that using Netfilter with some cBPF code for example, but that's always a bit cryptic. Packetdrill seems better fitted for that. Fixes: 4f49d633 ("selftests: mptcp: add fullmesh testcases") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
When reacting upon the reception of an ADD_ADDR, the in-kernel PM first looks for fullmesh endpoints. If there are some, it will pick them, using their entry ID. It should set the ID 0 when using the endpoint corresponding to the initial subflow, it is a special case imposed by the MPTCP specs. Note that msk->mpc_endpoint_id might not be set when receiving the first ADD_ADDR from the server. So better to compare the addresses. Fixes: 1a0d6136 ("mptcp: local addresses fullmesh") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
The ID 0 is specific per MPTCP connections. The per netns entries cannot have this special ID 0 then. But that's different for the userspace PM where the entries are per connection, they can then use this special ID 0. Fixes: f40be0db ("mptcp: unify pm get_flags_and_ifindex_by_id") Cc: stable@vger.kernel.org Acked-by:
Geliang Tang <geliang@kernel.org> Reviewed-by:
-
Matthieu Baerts (NGI0) authored
The limits might have changed in between, it is best to check them before accepting new ADD_ADDR. Fixes: d0876b22 ("mptcp: add the incoming RM_ADDR support") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
Adding the following warning ... WARN_ON_ONCE(msk->pm.add_addr_accepted == 0) ... before decrementing the add_addr_accepted counter helped to find a bug when running the "remove single subflow" subtest from the mptcp_join.sh selftest. Removing a 'subflow' endpoint will first trigger a RM_ADDR, then the subflow closure. Before this patch, and upon the reception of the RM_ADDR, the other peer will then try to decrement this add_addr_accepted. That's not correct because the attached subflows have not been created upon the reception of an ADD_ADDR. A way to solve that is to decrement the counter only if the attached subflow was an MP_JOIN to a remote id that was not 0, and initiated by the host receiving the RM_ADDR. Fixes: d0876b22 ("mptcp: add the incoming RM_ADDR support") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
Adding the following warning ... WARN_ON_ONCE(msk->pm.local_addr_used == 0) ... before decrementing the local_addr_used counter helped to find a bug when running the "remove single address" subtest from the mptcp_join.sh selftests. Removing a 'signal' endpoint will trigger the removal of all subflows linked to this endpoint via mptcp_pm_nl_rm_addr_or_subflow() with rm_type == MPTCP_MIB_RMSUBFLOW. This will decrement the local_addr_used counter, which is wrong in this case because this counter is linked to 'subflow' endpoints, and here it is a 'signal' endpoint that is being removed. Now, the counter is decremented, only if the ID is being used outside of mptcp_pm_nl_rm_addr_or_subflow(), only for 'subflow' endpoints, and if the ID is not 0 -- local_addr_used is not taking into account these ones. This marking of the ID as being available, and the decrement is done no matter if a subflow using this ID is currently available, because the subflow could have been closed before. Fixes: 06faa227 ("mptcp: remove multi addresses and subflows in PM") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
This helper is confusing. It is in pm.c, but it is specific to the in-kernel PM and it cannot be used by the userspace one. Also, it simply calls one in-kernel specific function with the PM lock, while the similar mptcp_pm_remove_addr() helper requires the PM lock. What's left is the pr_debug(), which is not that useful, because a similar one is present in the only function called by this helper: mptcp_pm_nl_rm_subflow_received() After these modifications, this helper can be marked as 'static', and the lock can be taken only once in mptcp_pm_flush_addrs_and_subflows(). Note that it is not a bug fix, but it will help backporting the following commits. Fixes: 0ee4261a ("mptcp: implement mptcp_pm_remove_subflow") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
After having flushed endpoints that didn't cause the creation of new subflows, it is important to check endpoints can be re-created, re-using previously used IDs. Before the previous commit, the client would not have been able to re-create the subflow that was previously rejected. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 06faa227 ("mptcp: remove multi addresses and subflows in PM") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
If no subflows are attached to the 'subflow' endpoints that are being flushed, the corresponding addr IDs will not be marked as available again. Mark all ID as being available when flushing all the 'subflow' endpoints, and reset local_addr_used counter to cover these cases. Note that mptcp_pm_remove_addrs_and_subflows() helper is only called for flushing operations, not to remove a specific set of addresses and subflows. Fixes: 06faa227 ("mptcp: remove multi addresses and subflows in PM") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
This test extends "delete and re-add" to validate the previous commit. A new 'subflow' endpoint is added, but the subflow request will be rejected. The result is that no subflow will be established from this address. Later, the endpoint is removed and re-added after having cleared the firewall rule. Before the previous commit, the client would not have been able to create this new subflow. While at it, extra checks have been added to validate the expected numbers of MPJ and RM_ADDR. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: b6c08380 ("mptcp: remove addr and subflow in PM netlink") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
If no subflow is attached to the 'subflow' endpoint that is being removed, the addr ID will not be marked as available again. Mark the linked ID as available when removing the 'subflow' endpoint if no subflow is attached to it. While at it, the local_addr_used counter is decremented if the ID was marked as being used to reflect the reality, but also to allow adding new endpoints after that. Fixes: b6c08380 ("mptcp: remove addr and subflow in PM netlink") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
This test extends "delete re-add signal" to validate the previous commit. An extra address is announced by the server, but this address cannot be used by the client. The result is that no subflow will be established to this address. Later, the server will delete this extra endpoint, and set a new one, with a valid address, but re-using the same ID. Before the previous commit, the server would not have been able to announce this new address. While at it, extra checks have been added to validate the expected numbers of MPJ, ADD_ADDR and RM_ADDR. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: b6c08380 ("mptcp: remove addr and subflow in PM netlink") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
If no subflow is attached to the 'signal' endpoint that is being removed, the addr ID will not be marked as available again. Mark the linked ID as available when removing the address entry from the list to cover this case. Fixes: b6c08380 ("mptcp: remove addr and subflow in PM netlink") Cc: stable@vger.kernel.org Reviewed-by:
-
Stephen Hemminger authored
There is a bug in netem_enqueue() introduced by commit 5845f706 ("net: netem: fix skb length BUG_ON in __skb_to_sgvec") that can lead to a use-after-free. This commit made netem_enqueue() always return NET_XMIT_SUCCESS when a packet is duplicated, which can cause the parent qdisc's q.qlen to be mistakenly incremented. When this happens qlen_notify() may be skipped on the parent during destruction, leaving a dangling pointer for some classful qdiscs like DRR. There are two ways for the bug happen: - If the duplicated packet is dropped by rootq->enqueue() and then the original packet is also dropped. - If rootq->enqueue() sends the duplicated packet to a different qdisc and the original packet is dropped. In both cases NET_XMIT_SUCCESS is returned even though no packets are enqueued at the netem qdisc. The fix is to defer the enqueue of the duplicate packet until after the original packet has been guaranteed to return NET_XMIT_SUCCESS. Fixes: 5845f706 ("net: netem: fix skb length BUG_ON in __skb_to_sgvec") Reported-by:
Budimir Markovic <markovicbudimir@gmail.com> Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Reviewed-by:
-
- 20 Aug, 2024 15 commits
-
-
Joseph Huang authored
If an ATU violation was caused by a CPU Load operation, the SPID could be larger than DSA_MAX_PORTS (the size of mv88e6xxx_chip.ports[] array). Fixes: 75c05a74 ("net: dsa: mv88e6xxx: Fix counting of ATU violations") Signed-off-by:
Joseph Huang <Joseph.Huang@garmin.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240819235251.1331763-1-Joseph.Huang@garmin.comSigned-off-by:
-
Martin Whitaker authored
When performing the port_hwtstamp_set operation, ptp_schedule_worker() will be called if hardware timestamoing is enabled on any of the ports. When using multiple ports for PTP, port_hwtstamp_set is executed for each port. When called for the first time ptp_schedule_worker() returns 0. On subsequent calls it returns 1, indicating the worker is already scheduled. Currently the ksz driver treats 1 as an error and fails to complete the port_hwtstamp_set operation, thus leaving the timestamping configuration for those ports unchanged. This patch fixes this by ignoring the ptp_schedule_worker() return value. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/7aae307a-35ca-4209-a850-7b2749d40f90@martin-whitaker.me.uk Fixes: bb01ad30 ("net: dsa: microchip: ptp: manipulating absolute time using ptp hw clock") Signed-off-by:
Martin Whitaker <foss@martin-whitaker.me.uk> Reviewed-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Link: https://patch.msgid.link/20240817094141.3332-1-foss@martin-whitaker.me.ukSigned-off-by:
-
Paolo Abeni authored
Sabrina reports that the igb driver does not cope well with large MAX_SKB_FRAG values: setting MAX_SKB_FRAG to 45 causes payload corruption on TX. An easy reproducer is to run ssh to connect to the machine. With MAX_SKB_FRAGS=17 it works, with MAX_SKB_FRAGS=45 it fails. This has been reported originally in https://bugzilla.redhat.com/show_bug.cgi?id=2265320 The root cause of the issue is that the driver does not take into account properly the (possibly large) shared info size when selecting the ring layout, and will try to fit two packets inside the same 4K page even when the 1st fraglist will trump over the 2nd head. Address the issue by checking if 2K buffers are insufficient. Fixes: 3948b059 ("net: introduce a config option to tweak MAX_SKB_FRAGS") Reported-by:
Jan Tluka <jtluka@redhat.com> Reported-by:
Jirka Hladky <jhladky@redhat.com> Reported-by:
Sabrina Dubroca <sd@queasysnail.net> Tested-by:
Corinna Vinschen <vinschen@redhat.com> Signed-off-by:
-
Nikolay Kuratov authored
It is done everywhere in cxgb4 code, e.g. in is_filter_exact_match() There is no reason it should not be done here Found by Linux Verification Center (linuxtesting.org) with SVACE Signed-off-by:
Nikolay Kuratov <kniv@yandex-team.ru> Cc: stable@vger.kernel.org Fixes: 12b276fb ("cxgb4: add support to create hash filters") Reviewed-by:
-
Dan Carpenter authored
The dpaa2_switch_add_bufs() function returns the number of bufs that it was able to add. It returns BUFS_PER_CMD (7) for complete success or a smaller number if there are not enough pages available. However, the error checking is looking at the total number of bufs instead of the number which were added on this iteration. Thus the error checking only works correctly for the first iteration through the loop and subsequent iterations are always counted as a success. Fix this by checking only the bufs added in the current iteration. Fixes: 0b1b7137 ("staging: dpaa2-switch: handle Rx path on control interface") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by:
-
Michal Swiatkowski authored
Use always the same pf id in devlink port number. When doing pass-through the PF to VM bus info func number can be any value. Fixes: 2ae0aa47 ("ice: Move devlink port to PF/VF struct") Reviewed-by:
Wojciech Drewek <wojciech.drewek@intel.com> Suggested-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Maciej Fijalkowski authored
When working on multi-buffer packet on arch that has PAGE_SIZE >= 8192, truesize is calculated and stored in xdp_buff::frame_sz per each processed Rx buffer. This means that frame_sz will contain the truesize based on last received buffer, but commit 1dc1a7e7 ("ice: Centrallize Rx buffer recycling") assumed this value will be constant for each buffer, which breaks the page recycling scheme and mess up the way we update the page::page_offset. To fix this, let us work on constant truesize when PAGE_SIZE >= 8192 instead of basing this on size of a packet read from Rx descriptor. This way we can simplify the code and avoid calculating truesize per each received frame and on top of that when using xdp_update_skb_shared_info(), current formula for truesize update will be valid. This means ice_rx_frame_truesize() can be removed altogether. Furthermore, first call to it within ice_clean_rx_irq() for 4k PAGE_SIZE was redundant as xdp_buff::frame_sz is initialized via xdp_init_buff() in ice_vsi_cfg_rxq(). This should have been removed at the point where xdp_buff struct started to be a member of ice_rx_ring and it was no longer a stack based variable. There are two fixes tags as my understanding is that the first one exposed us to broken truesize and page_offset handling and then second introduced broken skb_shared_info update in ice_{construct,build}_skb(). Reported-and-tested-by:
Luiz Capitulino <luizcap@redhat.com> Closes: https://lore.kernel.org/netdev/8f9e2a5c-fd30-4206-9311-946a06d031bb@redhat.com/ Fixes: 1dc1a7e7 ("ice: Centrallize Rx buffer recycling") Fixes: 2fba7dc5 ("ice: Add support for XDP multi-buffer on Rx side") Signed-off-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by:
-
Maciej Fijalkowski authored
For bigger PAGE_SIZE archs, ice driver works on 3k Rx buffers. Therefore, ICE_LAST_OFFSET should take into account ICE_RXBUF_3072, not ICE_RXBUF_2048. Fixes: 7237f5b0 ("ice: introduce legacy Rx flag") Suggested-by:
-
Maciej Fijalkowski authored
Architectures that have PAGE_SIZE >= 8192 such as arm64 should act the same as x86 currently, meaning reuse of a page should only take place when no one else is busy with it. Do two things independently of underlying PAGE_SIZE: - store the page count under ice_rx_buf::pgcnt - then act upon its value vs ice_rx_buf::pagecnt_bias when making the decision regarding page reuse Fixes: 2b245cb2 ("ice: Implement transmit and NAPI support") Signed-off-by:
-
Paolo Abeni authored
Nikolay Aleksandrov says: ==================== bonding: fix xfrm offload bugs I noticed these problems while reviewing a bond xfrm patch recently. The fixes are straight-forward, please review carefully the last one because it has side-effects. This set has passed bond's selftests and my custom bond stress tests which crash without these fixes. Note the first patch is not critical, but it simplifies the next fix. ==================== Link: https://patch.msgid.link/20240816114813.326645-1-razor@blackwall.orgSigned-off-by:
-
Nikolay Aleksandrov authored
If the active slave is cleared manually the xfrm state is not flushed. This leads to xfrm add/del imbalance and adding the same state multiple times. For example when the device cannot handle anymore states we get: [ 1169.884811] bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA because it's filled with the same state after multiple active slave clearings. This change also has a few nice side effects: user-space gets a notification for the change, the old device gets its mac address and promisc/mcast adjusted properly. Fixes: 18cb261a ("bonding: support hardware encryption offload to slaves") Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Nikolay Aleksandrov authored
We shouldn't set real_dev to NULL because packets can be in transit and xfrm might call xdo_dev_offload_ok() in parallel. All callbacks assume real_dev is set. Example trace: kernel: BUG: unable to handle page fault for address: 0000000000001030 kernel: bond0: (slave eni0np1): making interface the new active one kernel: #PF: supervisor write access in kernel mode kernel: #PF: error_code(0x0002) - not-present page kernel: PGD 0 P4D 0 kernel: Oops: 0002 [#1] PREEMPT SMP kernel: CPU: 4 PID: 2237 Comm: ping Not tainted 6.7.7+ #12 kernel: Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 kernel: RIP: 0010:nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: Code: e0 0f 0b 48 83 7f 38 00 74 de 0f 0b 48 8b 47 08 48 8b 37 48 8b 78 40 e9 b2 e5 9a d7 66 90 0f 1f 44 00 00 48 8b 86 80 02 00 00 <83> 80 30 10 00 00 01 b8 01 00 00 00 c3 0f 1f 80 00 00 00 00 0f 1f kernel: bond0: (slave eni0np1): making interface the new active one kernel: RSP: 0018:ffffabde81553b98 EFLAGS: 00010246 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: kernel: RAX: 0000000000000000 RBX: ffff9eb404e74900 RCX: ffff9eb403d97c60 kernel: RDX: ffffffffc090de10 RSI: ffff9eb404e74900 RDI: ffff9eb3c5de9e00 kernel: RBP: ffff9eb3c0a42000 R08: 0000000000000010 R09: 0000000000000014 kernel: R10: 7974203030303030 R11: 3030303030303030 R12: 0000000000000000 kernel: R13: ffff9eb3c5de9e00 R14: ffffabde81553cc8 R15: ffff9eb404c53000 kernel: FS: 00007f2a77a3ad00(0000) GS:ffff9eb43bd00000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000001030 CR3: 00000001122ab000 CR4: 0000000000350ef0 kernel: bond0: (slave eni0np1): making interface the new active one kernel: Call Trace: kernel: <TASK> kernel: ? __die+0x1f/0x60 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? page_fault_oops+0x142/0x4c0 kernel: ? do_user_addr_fault+0x65/0x670 kernel: ? kvm_read_and_reset_apf_flags+0x3b/0x50 kernel: bond0: (slave eni0np1): making interface the new active one kernel: ? exc_page_fault+0x7b/0x180 kernel: ? asm_exc_page_fault+0x22/0x30 kernel: ? nsim_bpf_uninit+0x50/0x50 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): making interface the new active one kernel: bond_ipsec_offload_ok+0x7b/0x90 [bonding] kernel: xfrm_output+0x61/0x3b0 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ip_push_pending_frames+0x56/0x80 Fixes: 18cb261a ("bonding: support hardware encryption offload to slaves") Signed-off-by:
-
Nikolay Aleksandrov authored
We must check if there is an active slave before dereferencing the pointer. Fixes: 18cb261a ("bonding: support hardware encryption offload to slaves") Signed-off-by:
-
Nikolay Aleksandrov authored
Fix the return type which should be bool. Fixes: 955b785e ("bonding: fix suspicious RCU usage in bond_ipsec_offload_ok()") Signed-off-by:
-
Thomas Bogendoerfer authored
GRO code checks for matching layer 2 headers to see, if packet belongs to the same flow and because ip6 tunnel set dev->hard_header_len this check fails in cases, where it shouldn't. To fix this don't set hard_header_len, but use needed_headroom like ipv4/ip_tunnel.c does. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Link: https://patch.msgid.link/20240815151419.109864-1-tbogendoerfer@suse.deSigned-off-by:
-
