Commits · a113ff886b9a6e892dd4107be1fd7883cf020885 · Kirill Smelkov / linux

10 Dec, 2014 5 commits

ALSA: dice: Add support for MIDI capture/playback · a113ff88

Takashi Sakamoto authored Dec 09, 2014

This commit adds a support for MIDI capture/playback

When MIDI substrams already start streaming and PCM substreams are going to
join at different sampling rate, streams are stopped once. Then sampling rate
is changed and streams are restarted.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

a113ff88

ALSA: dice: Add support for capturing PCM samples · 69dcf3e4

Takashi Sakamoto authored Dec 09, 2014

This commit adds a support for capturing PCM samples.

When opposite PCM substream is already running, available sampling rate is
limited at current one.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

69dcf3e4

ALSA: dice: Support for non SYT-Match sampling clock source mode · 8fc01fc0

Takashi Sakamoto authored Dec 09, 2014

This commit allows this driver to handle devices with non SYT-Match
sampling clock source.

When sampling clock source is SYT-Match mode, devices handle
'presentation timestamp' in received packets and generates sampling clock
according to the information. In this case, driver is synchronization master
and must transfer correct value in SYT field of each packets in outgoing
stream, then the outgoing stream is a master stream.

On the other hand, non SYT-Match mode, devices do this. So drivers must pick
up the value in SYT field of incoming packets and use the value for outgoing
stream. Currently firewire-lib module achieve this work.

Furthermore, without SYT-Match and internal clock source, the sampling rate
should be fixed for the other devices connected to the handled device. This
commit add a restriction of sampling rate at this situation.

With these implementations, this driver has no need to set clock source.
This commit remove set function.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

8fc01fc0

ALSA: dice: Add support for duplex streams with synchronization · 9a02843c

Takashi Sakamoto authored Dec 09, 2014

This commit adds support for AMDTP in-stream. As a result, Dice driver
supports full duplex streams with synchronization.

AMDTP can transfer timestamps in its packets. By handling the timestamp,
devices can synchronize to the other devices or drivers on the same bus.

When Dice chipset is 'enabled', it starts streams with correct settings.
This 'enable' register is global, thus, when a stream is started to run,
an opposite stream can't start unless turning off 'enable'. Therefore
a pair of streams must be running. This causes a loss of CPU usage when
single stream is needed for neither playbacking or capturing.

This commit assumes that playback-only models also have a functionality
to transmit stream for delivering timestamps.

Currently, sampling clock source is restricted to SYT-Match mode. This is
improved in followed commit. I note that at SYT-Match mode, Dice can select
from 4 streams for synchronization but this driver uses the 1st stream only
for simplicity.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9a02843c

ALSA: dice: Change the way to start stream · 288a8d0c

Takashi Sakamoto authored Dec 09, 2014

Streaming functionality can start streams when rate is given but currently
some codes are in PCM functionality.

This commit changes the way to start stream and add some arrangement
to make it easy to understand the way.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

288a8d0c

08 Dec, 2014 35 commits

ALSA: jack: Add dummy snd_jack_set_key() definition · bf35df66

Takashi Iwai authored Dec 08, 2014

For fixing a build error with CONFIG_SND_JACK=n
sound/soc/codecs/ts3a227e.c:223:2: error: implicit declaration of function ‘snd_jack_set_key’ [-Werror=implicit-function-declaration]
Signed-off-by: Takashi Iwai <tiwai@suse.de>

bf35df66

Merge tag 'asoc-v3.19' of... · e5edba46

Takashi Iwai authored Dec 08, 2014

Merge tag 'asoc-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v3.19

Lots and lots of changes this time around, the usual set of driver
updates and a huge bulk of cleanups from Lars-Peter.  Probably the most
interesting thing for most users is the Intel driver updates which will
(with some more machine integration work) enable support for newer x86
laptops.

 - Conversion of AC'97 drivers to use regmap, bringing us closer to the
   removal of the ASoC level I/O code.
 - Clean up a lot of old drivers that were open coding things that have
   subsequently been implemented in the core.
 - Some DAPM performance improvements.
 - Removal of the now seldom used CODEC mutex.
 - Lots of updates for the newer Intel SoC support, including support
   for the DSP and some Cherrytrail and Braswell machine drivers.
 - Support for Samsung boards using rt5631 as the CODEC.
 - Removal of the obsolete AFEB9260 machine driver.
 - Driver support for the TI TS3A227E headset driver used in some
   Chrombeooks.

e5edba46

Merge remote-tracking branches 'asoc/topic/wm9090', 'asoc/topic/wm9712' and... · 1810afd3
Mark Brown authored Dec 08, 2014
```
Merge remote-tracking branches 'asoc/topic/wm9090', 'asoc/topic/wm9712' and 'asoc/topic/wm9713' into asoc-next
```
1810afd3