- 28 Jan, 2021 1 commit
-
-
Alex Deucher authored
On some boards the rpm interface apparently does not work at all leading to the fan not spinning or spinning at strange speeds. Revert this for now to fix 5.10, 5.11. The follow on patch fixes this properly for 5.12. This reverts commit 8d6e65ad. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1408Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
- 21 Jan, 2021 13 commits
-
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-5.11-2021-01-21' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.11-2021-01-21: amdgpu: - Green Sardine fixes - Vangogh fixes - Renoir fixes - Misc display fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210121160129.3981-1-alexander.deucher@amd.com
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2021-01-21' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.11-rc5: - HDCP fixes - PMU wakeref fix - Fix HWSP validity race - Fix DP protocol converter accidental 4:4:4->4:2:0 conversion for RGB Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87a6t2kzgb.fsf@intel.com
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
Short summary of fixes pull (less than what git shortlog provides): * drm/atomic: Release state on error * drm/syncobj: Fix use-after-free * drm/ttm: Don't use GFP_TRANSHUGE_LIGTH * drm/vc4: Unify driver naming for PCM * drm/vram-helper: Fix memory leak in vmap Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YAgdYGNoH7pC29rz@linux-uq9g
-
Aaron Liu authored
Starting from vangogh, the ATCL2 and DAGB0 registers relative to mgcg/ls has changed. For MGCG: Replace mmMM_ATC_L2_MISC_CG with mmMM_ATC_L2_CGTT_CLK_CTRL. For MGLS: Replace mmMM_ATC_L2_MISC_CG with mmMM_ATC_L2_CGTT_CLK_CTRL. Add DAGB0_(WR/RD)_CGTT_CLK_CTRL registers. Signed-off-by: Aaron Liu <aaron.liu@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Jinzhou Su authored
GCR_GENERAL_CNTL is defined differently in gc_10_1_0_offset.h and gc_10_3_0_offset.h. Update GCR_GENERAL_CNTL for Vangogh. Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Prike Liang authored
In the renoir there is no need GpuChangeState message set to exit gfxoff in the s0i3 resume since mmnbif_gpu_BIF_DOORBELL_FENCE_CNTL has been added in the s0i3 FSDL. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Vladimir Stempen authored
[why] Heavy corruption or blank screen reported on wake, with 6k display connected and FEC enabled [how] When Disable/Enable stream for display pipes on HPDRX, DC should take into account ODM split pipes. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Anson Jacob <anson.jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Nicholas Kazlauskas authored
[Why & How] These can differ per ASIC or not be present. Don't call the dcn20 ones directly but rather the ones defined by the ASIC init table. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Anson Jacob <anson.jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Bing Guo authored
Why: Function decide_dp_link_settings() loops infinitely when required bandwidth can't be supported. How: Check the required bandwidth against verified_link_cap before trying to find a link setting for it. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Bing Guo <bing.guo@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anson Jacob <anson.jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Aric Cyr authored
[Why] When no displays are currently enabled, display driver should not disallow PSTATE switching. [How] Allow PSTATE switching if either the active configuration supports it, or there are no active displays. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anson Jacob <anson.jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Jake Wang authored
[WHY] dram clock change latencies get updated using ddr4 latency table, but that update does not happen before validation. This value should not be the default and should be number received from df for better mode support. This may cause a PState hang on high refresh panels with short vblanks such as on 1080p 360hz or 300hz panels. [HOW] Update latency from 23.84 to 11.72. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Reviewed-by: Sung Lee <Sung.Lee@amd.com> Acked-by: Anson Jacob <anson.jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Huang Rui authored
The ip discovery is supported on green sardine, it doesn't need gpu info firmware anymore. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Prike Liang <Prike.Liang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.10.x
-
Sung Lee authored
[WHY] Previously as MPO + ODM Combine was not supported, finding secondary pipes for each case was mutually exclusive. Now that both are supported at the same time, both cases should be taken into account when finding a secondary pipe. [HOW] If a secondary pipe cannot be found based on previous bottom pipe, search for a second pipe using next_odm_pipe instead. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Anson Jacob <anson.jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.10.x
-
- 20 Jan, 2021 1 commit
-
-
Daniel Vetter authored
While reviewing Christian's annotation patch I noticed that we have a user-after-free for the WAIT_FOR_SUBMIT case: We drop the syncobj reference before we've completed the waiting. Of course usually there's nothing bad happening here since userspace keeps the reference, but we can't rely on userspace to play nice here! Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Fixes: bc9c80fe ("drm/syncobj: use the timeline point in drm_syncobj_find_fence v4") Reviewed-by: Christian König <christian.koenig@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.2+ Link: https://patchwork.freedesktop.org/patch/msgid/20210119130318.615145-1-daniel.vetter@ffwll.ch
-
- 19 Jan, 2021 3 commits
-
-
Thomas Zimmermann authored
For performance, BO page mappings can stay in place even if the map counter has returned to 0. In these cases, the existing page mapping has to be reused by the next vmap operation. Otherwise a new mapping would be installed and the old mapping's pages leak. Fix the issue by reusing existing page mappings for vmap operations. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 1086db71 ("drm/vram-helper: Remove invariant parameters from internal kmap function") Acked-by: Christian König <christian.koenig@amd.com> Tested-by: Eli Cohen <elic@nvidia.com> Reported-by: Eli Cohen <elic@nvidia.com> Reported-by: kernel test robot <oliver.sang@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Christian König <christian.koenig@amd.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20210118144639.27307-1-tzimmermann@suse.de
-
Pan Bian authored
Put the state before returning error code. Fixes: 44596b8c ("drm/atomic: Unify conflicting encoder handling.") Signed-off-by: Pan Bian <bianpan2016@163.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210119121127.84127-1-bianpan2016@163.com
-
Ville Syrjälä authored
Let's not enable the 4:4:4->4:2:0 conversion bit in the DFP unless we're actually outputting YCbCr 4:4:4. It would appear some protocol converters blindy consult this bit even when the source is outputting RGB, resulting in a visual mess. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2914Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111164111.13302-1-ville.syrjala@linux.intel.com Fixes: 181567aa ("drm/i915: Do YCbCr 444->420 conversion via DP protocol converters") Reviewed-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 3170a21f) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210118154355.24453-1-ville.syrjala@linux.intel.com
-
- 18 Jan, 2021 8 commits
-
-
Chris Wilson authored
Since we allow removing the timeline map at runtime, there is a risk that rq->hwsp points into a stale page. To control that risk, we hold the RCU read lock while reading *rq->hwsp, but we missed a couple of important barriers. First, the unpinning / removal of the timeline map must be after all RCU readers into that map are complete, i.e. after an rcu barrier (in this case courtesy of call_rcu()). Secondly, we must make sure that the rq->hwsp we are about to dereference under the RCU lock is valid. In this case, we make the rq->hwsp pointer safe during i915_request_retire() and so we know that rq->hwsp may become invalid only after the request has been signaled. Therefore is the request is not yet signaled when we acquire rq->hwsp under the RCU, we know that rq->hwsp will remain valid for the duration of the RCU read lock. This is a very small window that may lead to either considering the request not completed (causing a delay until the request is checked again, any wait for the request is not affected) or dereferencing an invalid pointer. Fixes: 3adac468 ("drm/i915: Introduce concept of per-timeline (context) HWSP") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: <stable@vger.kernel.org> # v5.1+ Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201218122421.18344-1-chris@chris-wilson.co.uk (cherry picked from commit 9bb36cf6) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210118101755.476744-1-chris@chris-wilson.co.uk
-
Tvrtko Ursulin authored
Chris found a CI report which points out calling intel_runtime_pm_get from inside i915_pmu_enable hook is not allowed since it can be invoked from hard irq context. This is something we knew but forgot, so lets fix it once again. We do this by syncing the internal book keeping with hardware rc6 counter on driver load. v2: * Always sync on parking and fully sync on init. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: f4e9894b ("drm/i915/pmu: Correct the rc6 offset upon enabling") Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201214094349.3563876-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit dbe13ae1) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210118100724.465555-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
On error we unpin and free the wa_ctx.vma, but do not clear any of the derived flags. During lrc_init, we look at the flags and attempt to dereference the wa_ctx.vma if they are set. To protect the error path where we try to limp along without the wa_ctx, make sure we clear those flags! Reported-by: Matt Roper <matthew.d.roper@intel.com> Fixes: 604a8f6f ("drm/i915/lrc: Only enable per-context and per-bb buffers if set") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.15+ Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210108204026.20682-1-chris@chris-wilson.co.uk (cherry-picked from 5b4dc95c) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210118095332.458813-1-chris@chris-wilson.co.uk
-
Nicolas Saenz Julienne authored
User-space ALSA matches a card's driver name against an internal list of aliases in order to select the correct configuration for the system. When the driver name isn't defined, the match is performed against the card's name. With the introduction of RPi4 we now have two HDMI ports with two distinct audio cards. This is reflected in their names, making them different from previous RPi versions. With this, ALSA ultimately misses the board's configuration on RPi4. In order to avoid this, set "card->driver_name" to "vc4-hdmi" unanimously. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Fixes: f437bc1e ("drm/vc4: drv: Support BCM2711") Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210115191209.12852-1-nsaenzjulienne@suse.de
-
Christian König authored
The only flag we really need is __GFP_NOMEMALLOC, highmem depends on dma32 and moveable/compound should never be set in the first place. Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/413812/ Link: https://patchwork.freedesktop.org/patch/413964/ Fixes: d099fc8f ("drm/ttm: new TT backend allocation pool v3") Reported-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Anshuman Gupta authored
Get DRM connector reference count while scheduling a prop work to avoid any possible destroy of DRM connector when it is in DRM_CONNECTOR_REGISTERED state. Fixes: a6597faa ("drm/i915: Protect workers against disappearing connectors") Cc: Sean Paul <seanpaul@chromium.org> Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Tested-by: Karthik B S <karthik.b.s@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-3-anshuman.gupta@intel.com (cherry picked from commit b3c6661a) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
-
Anshuman Gupta authored
When crtc state need_modeset is true it is not necessary it is going to be a real modeset, it can turns to be a fastset instead of modeset. This turns content protection property to be DESIRED and hdcp update_pipe left with property to be in DESIRED state but actual hdcp->value was ENABLED. This issue is caught with DP MST setup, where we have multiple connector in same DP_MST topology. When disabling HDCP on one of DP MST connector leads to set the crtc state need_modeset to true for all other crtc driving the other DP-MST topology connectors. This turns up other DP MST connectors CP property to be DESIRED despite the actual hdcp->value is ENABLED. Above scenario fails the DP MST HDCP IGT test, disabling HDCP on one MST stream should not cause to disable HDCP on another MST stream on same DP MST topology. v2: - Fixed connector->base.registration_state == DRM_CONNECTOR_REGISTERED WARN_ON. v3: - Commit log improvement. [Uma] - Added a comment before scheduling prop_work. [Uma] Fixes: 33f9a623 ("drm/i915/hdcp: Update CP as per the kernel internal state") Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Tested-by: Karthik B S <karthik.b.s@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-2-anshuman.gupta@intel.com (cherry picked from commit d276e167) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
-
Linus Torvalds authored
-
- 17 Jan, 2021 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linuxLinus Torvalds authored
Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix 'CPU too large' error in Intel PT - Correct event attribute sizes in 'perf inject' - Sync build_bug.h and kvm.h kernel copies - Fix bpf.h header include directive in 5sec.c 'perf trace' bpf example - libbpf tests fixes - Fix shadow stat 'perf test' for non-bash shells - Take cgroups into account for shadow stats in 'perf stat' * tag 'perf-tools-fixes-2021-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf inject: Correct event attribute sizes perf intel-pt: Fix 'CPU too large' error perf stat: Take cgroups into account for shadow stats perf stat: Introduce struct runtime_stat_data libperf tests: Fail when failing to get a tracepoint id libperf tests: If a test fails return non-zero libperf tests: Avoid uninitialized variable warning perf test: Fix shadow stat test for non-bash shells tools headers: Syncronize linux/build_bug.h with the kernel sources tools headers UAPI: Sync kvm.h headers with the kernel sources perf bpf examples: Fix bpf.h header include directive in 5sec.c example
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "One fix for a lack of alignment in our linker script, that can lead to crashes depending on configuration etc. One fix for the 32-bit VDSO after the C VDSO conversion. Thanks to Andreas Schwab, Ariel Marcovitch, and Christophe Leroy" * tag 'powerpc-5.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/vdso: Fix clock_gettime_fallback for vdso32 powerpc: Fix alignment bug within the init sections
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull misc vfs fixes from Al Viro: "Several assorted fixes. I still think that audit ->d_name race is better fixed this way for the benefit of backports, with any possibly fancier variants done on top of it" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: dump_common_audit_data(): fix racy accesses to ->d_name iov_iter: fix the uaccess area in copy_compat_iovec_from_user umount(2): move the flag validity checks first
-
Linus Torvalds authored
So technically there is nothing wrong with adding a pinned page to the swap cache, but the pinning obviously means that the page can't actually be free'd right now anyway, so it's a bit pointless. However, the real problem is not with it being a bit pointless: the real issue is that after we've added it to the swap cache, we'll try to unmap the page. That will succeed, because the code in mm/rmap.c doesn't know or care about pinned pages. Even the unmapping isn't fatal per se, since the page will stay around in memory due to the pinning, and we do hold the connection to it using the swap cache. But when we then touch it next and take a page fault, the logic in do_swap_page() will map it back into the process as a possibly read-only page, and we'll then break the page association on the next COW fault. Honestly, this issue could have been fixed in any of those other places: (a) we could refuse to unmap a pinned page (which makes conceptual sense), or (b) we could make sure to re-map a pinned page writably in do_swap_page(), or (c) we could just make do_wp_page() not COW the pinned page (which was what we historically did before that "mm: do_wp_page() simplification" commit). But while all of them are equally valid models for breaking this chain, not putting pinned pages into the swap cache in the first place is the simplest one by far. It's also the safest one: the reason why do_wp_page() was changed in the first place was that getting the "can I re-use this page" wrong is so fraught with errors. If you do it wrong, you end up with an incorrectly shared page. As a result, using "page_maybe_dma_pinned()" in either do_wp_page() or do_swap_page() would be a serious bug since it is only a (very good) heuristic. Re-using the page requires a hard black-and-white rule with no room for ambiguity. In contrast, saying "this page is very likely dma pinned, so let's not add it to the swap cache and try to unmap it" is an obviously safe thing to do, and if the heuristic might very rarely be a false positive, no harm is done. Fixes: 09854ba9 ("mm: do_wp_page() simplification") Reported-and-tested-by: Martin Raiber <martin@urbackup.org> Cc: Pavel Begunkov <asml.silence@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 16 Jan, 2021 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Nine minor fixes, seven in drivers and two in the core SCSI disk driver (sd) which should be harmless involving removing an unused variable and quietening a spurious warning" Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com> * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sd: Remove obsolete variable in sd_remove() scsi: sd: Suppress spurious errors when WRITE SAME is being disabled scsi: scsi_debug: Fix memleak in scsi_debug_init() scsi: mpt3sas: Fix spelling mistake in Kconfig "compatiblity" -> "compatibility" scsi: qedi: Correct max length of CHAP secret scsi: ufs: Correct the LUN used in eh_device_reset_handler() callback scsi: ufs: Relocate flush of exceptional event scsi: ufs: Relax the condition of UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL scsi: ufs: Fix possible power drain during system suspend
-
Al Viro authored
We are not guaranteed the locking environment that would prevent dentry getting renamed right under us. And it's possible for old long name to be freed after rename, leading to UAF here. Cc: stable@kernel.org # v2.6.2+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Just an nvme pull request via Christoph: - don't initialize hwmon for discover controllers (Sagi Grimberg) - fix iov_iter handling in nvme-tcp (Sagi Grimberg) - fix a preempt warning in nvme-tcp (Sagi Grimberg) - fix a possible NULL pointer dereference in nvme (Israel Rukshin)" * tag 'block-5.11-2021-01-16' of git://git.kernel.dk/linux-block: nvme: don't intialize hwmon for discovery controllers nvme-tcp: fix possible data corruption with bio merges nvme-tcp: Fix warning with CONFIG_DEBUG_PREEMPT nvmet-rdma: Fix NULL deref when setting pi_enable and traddr INADDR_ANY
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "We still have a pending fix for a cancelation issue, but it's still being investigated. In the meantime: - Dead mm handling fix (Pavel) - SQPOLL setup error handling (Pavel) - Flush timeout sequence fix (Marcelo) - Missing finish_wait() for one exit case" * tag 'io_uring-5.11-2021-01-16' of git://git.kernel.dk/linux-block: io_uring: ensure finish_wait() is always called in __io_uring_task_cancel() io_uring: flush timeouts that should already have expired io_uring: do sqo disable on install_fd error io_uring: fix null-deref in io_disable_sqo_submit io_uring: don't take files/mm for a dead task io_uring: drop mm and files after task_work_run
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: "There are a few more fixes than a normal rc4, largely due to the bubble introduced by the holiday break: - return -ENOSYS for syscall number -1, which previously returned an uninitialized value. - ensure of_clk_init() has been called in time_init(), without which clock drivers may not be initialized. - fix sifive,uart0 driver to properly display the baud rate. A fix to initialize MPIE that allows interrupts to be processed during system calls. - avoid erronously begin tracing IRQs when interrupts are disabled, which at least triggers suprious lockdep failures. - workaround for a warning related to calling smp_processor_id() while preemptible. The warning itself is suprious on currently availiable systems. - properly include the generic time VDSO calls. A fix to our kasan address mapping. A fix to the HiFive Unleashed device tree, which allows the Ethernet PHY to be properly initialized by Linux (as opposed to relying on the bootloader). - defconfig update to include SiFive's GPIO driver, which is present on the HiFive Unleashed and necessary to initialize the PHY. - avoid allocating memory while initializing reserved memory. - avoid allocating the last 4K of memory, as pointers there alias with syscall errors. There are also two cleanups that should have no functional effect but do fix build warnings: - drop a duplicated definition of PAGE_KERNEL_EXEC. - properly declare the asm register SP shim. - cleanup the rv32 memory size Kconfig entry, to reflect the actual size of memory availiable" * tag 'riscv-for-linus-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Fix maximum allowed phsyical memory for RV32 RISC-V: Set current memblock limit RISC-V: Do not allocate memblock while iterating reserved memblocks riscv: stacktrace: Move register keyword to beginning of declaration riscv: defconfig: enable gpio support for HiFive Unleashed dts: phy: add GPIO number and active state used for phy reset dts: phy: fix missing mdio device and probe failure of vsc8541-01 device riscv: Fix KASAN memory mapping. riscv: Fixup CONFIG_GENERIC_TIME_VSYSCALL riscv: cacheinfo: Fix using smp_processor_id() in preemptible riscv: Trace irq on only interrupt is enabled riscv: Drop a duplicated PAGE_KERNEL_EXEC riscv: Enable interrupts during syscalls with M-Mode riscv: Fix sifive serial driver riscv: Fix kernel time_init() riscv: return -ENOSYS for syscall -1
-
Linus Torvalds authored
Turning a pinned page read-only breaks the pinning after COW. Don't do it. The whole "track page soft dirty" state doesn't work with pinned pages anyway, since the page might be dirtied by the pinning entity without ever being noticed in the page tables. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Turning page table entries read-only requires the mmap_sem held for writing. So stop doing the odd games with turning things from read locks to write locks and back. Just get the write lock. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Atish Patra authored
Linux kernel can only map 1GB of address space for RV32 as the page offset is set to 0xC0000000. The current description in the Kconfig is confusing as it indicates that RV32 can support 2GB of physical memory. That is simply not true for current kernel. In future, a 2GB split support can be added to allow 2GB physical address space. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Atish Patra authored
Currently, linux kernel can not use last 4k bytes of addressable space because IS_ERR_VALUE macro treats those as an error. This will be an issue for RV32 as any memblock allocator potentially allocate chunk of memory from the end of DRAM (2GB) leading bad address error even though the address was technically valid. Fix this issue by limiting the memblock if available memory spans the entire address space. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Atish Patra authored
Currently, resource tree allocates memory blocks while iterating on the list. It leads to following kernel warning because memblock allocation also invokes memory block reservation API. [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/resource.c:795 __insert_resource+0x8e/0xd0 [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.0-00022-ge20097fb37e2-dirty #549 [ 0.000000] epc: c00125c2 ra : c001262c sp : c1c01f50 [ 0.000000] gp : c1d456e0 tp : c1c0a980 t0 : ffffcf20 [ 0.000000] t1 : 00000000 t2 : 00000000 s0 : c1c01f60 [ 0.000000] s1 : ffffcf00 a0 : ffffff00 a1 : c1c0c0c4 [ 0.000000] a2 : 80c12b15 a3 : 80402000 a4 : 80402000 [ 0.000000] a5 : c1c0c0c4 a6 : 80c12b15 a7 : f5faf600 [ 0.000000] s2 : c1c0c0c4 s3 : c1c0e000 s4 : c1009a80 [ 0.000000] s5 : c1c0c000 s6 : c1d48000 s7 : c1613b4c [ 0.000000] s8 : 00000fff s9 : 80000200 s10: c1613b40 [ 0.000000] s11: 00000000 t3 : c1d4a000 t4 : ffffffff This is also unnecessary as we can pre-compute the total memblocks required for each memory region and allocate it before the loop. It save precious boot time not going through memblock allocation code every time. Fixes: 00ab027a ("RISC-V: Add kernel image sections to the resource tree") Reviewed-by: Anup Patel <anup@brainfault.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-